Research Advances in Intelligent Collision Avoidance and Adaptive Cruise Control

IEEE Intelligent Transportation Systems Magazine

Volumn 4, Issue 3, 2003, Pages 143-153

  Eskandarian, Azim ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b GEORGE WASHINGTON UNIVERSITY   (United States)

Author keywords

Adaptive cruise control (ACC); ance; collision avoid ; collision warning

Indexed keywords

EID: 85008026189     PISSN: 15249050     EISSN: 15580016     Source Type: Journal    
DOI: 10.1109/TITS.2003.821292     Document Type: Article

References (96)

1. S. Shladover, “Review of the state of development of advanced vehicle control systems (AVCS),” Vehicle Syst. Dyn., vol. 24, pp. 551-595, July 1995.
2. R. French, Y. Noguchi, and K. Sakamoto, “International competitiveness in IVHS: Europe, Japan, and the United States,” in Proc. 1994 Vehicle Navigation and Information Systems Conf., Yokohama, Japan, July 1994, pp. 525-530.
3. Review of National Automated Highway Research Program, 1998.
4. S. Tsugawa, M. Akoi, A. Hosaka, and K. Seki, “A survey of present IVHS activities in Japan,” Control Eng. Practice, vol. 5, pp. 1591-1597, Nov. 1997.
5. H. Keller, “German part in European research programs PROMETHEUS and DRIVE/ATT,” Transport. Res.: Policy and Practice, pt. A, vol. 28, pp. 483-493, Nov. 1994.
6. W. Zhang, S. Shladover, R. Hall, and T. Plocher, “A Functional Definition of Automated Highway Systems,”, TRB Paper 940 988, 1994.
7. P. Varaiya, “Smart cars on smart roads: Problems of control,” IEEE Trans. Automat. Control, vol. 38, pp. 195-207, Feb. 1993.
8. D. Swaroop and R. Huandra, “Intelligent cruise control design based on a traffic flow specification,” Vehicle Syst. Dyn., vol. 30, pp. 319-344, Nov. 1998.
9. D. Swaropp and K. Rajagopal, “Intelligent cruise control systems and traffic flow stability,” Transport. Res., pt. C, vol. 7, pp. 329-352, Dec. 1999.
10. D. Swaroop, K. Hedrick, C. Chien, and P. Ioannou, “Comparison of spacing and headway controllaws for automatically controlled vehicles,” Vehicle Syst. Dyn., vol. 23, pp. 597-625, Nov. 1994.
11. H. Tan, R. Rajamani, and W. Zhang, “Demonstration of an automated highway platoon system,” in Proc. 1998 American Control Conf., Philadelphia, PA, 1998, pp. 1823-1827.
12. R. Rajamani, S. Choi, B. Law, K. Hedrick, R. Prohaska, and P. Kretz, “Design and experimental implementation of longitudinal control for a platoon of automated vehicles,” ASME J. Dyn. Syst. Meas. Contr., vol. 122, pp. 470-476, Sept. 2000.
13. H. Winner, S. Witte, W. Uhler, and B. Lichtenberg, “Adaptive Cruise Control System: Aspects and Development Trends,”, SAE Paper 961010, 1996.
14. W. Prestl, T. Sauer, J. Steinle, and O. Tschernoster, “The BMW Active Cruise Control ACC,”, SAE Paper 2000-01-0344, 2000.
15. M. Persson, F. Botling, E. Hesslow, and R. Johansson, “Stop and go controller for adaptive cruise control,” in Proc. 1999 IEEE Int. Conf. Control Applications and IEEE Int. Symp. Computer-Aided Control System Design, Kohala Coast, HI, 1999, pp. 1692-1697.
16. P. Venhovens, K. Naab, and B. Adiprastito, “Stop and go cruise control,” Int. J. Automotive Technol., vol. 1, pp. 61-69, Dec. 2000.
17. Statistics Retrieved [Online] [Online]. Available: www.its.dot.gov/ivi/3DC.html
18. M. Kawai, “Collision Avoidance Technologies,”, SAE Paper 94CO38, 1994.
19. R. Deering and D. Viano, “Critical Success Factors for Crash Avoidance Countermeasure Implementation,”, SAE Paper 94CO25, 1994.
20. J. Woll, “Radar Based Adaptive Cruise Control for Truck Applications,”, SAE Paper 973 184, 1997.
21. P. Barber and N. Clarke, “Advanced collision warning systems,” in Proc. 1998 Inst. Elect. Eng. Colloquium Industrial Automation and Control: Application in the Automotive Industry, London, U.K., 1998, pp. 211-219.
22. J. Woll, “Radar Based Collision Warning System,”, SAE Paper 94CO36, 1994.
23. P. Ioannou and H. Raza, “Vehicle following control design for automated highway systems,” in Proc. 1997 IEEE Vehicular Technology Conf., Phoenix, AZ, 1997, pp. 904-908.
24. P. Ioannou and H. Raza, “Vehicle following control design for automated highway systems,” IEEE Control Syst. Mag., vol. 6, pp. 43-60, Dec. 1996.
25. Y. Zhang, E. Kosmatopoulos, P. Ioannou, and C. Chien, “Autonomous intelligent cruise controlusing front and back information for tight vehicle following maneuvers,” IEEE Trans. Veh. Technol., vol. 48, pp. 319-328, Jan. 1999.
26. O. Gehring and H. Fritz, “Practical results of a longitudinal control concept for truck platooning with vehicle to vehicle communication,” in Proc. IEEE Conf. Intelligent Transportation Systems, Boston, MA, 1997, pp. 117-122.
27. A. Vahidi, M. Druzhinina, A. Stefanopoulou, and H. Peng, “Simultaneous mass and time-varyinggrade estimation for heavy-duty vehicles,” in Proc. American Control Conf., Denver, CO, 2003, pp. 4951-4956.
28. H. Bae and J. Gerdes, “Parameter estimation and command modification for longitudinal control of heavy vehicles,” presented at the Proc. Int. Symp. Advanced Vehicle Control, Ann Arbor, MI, 2000.
29. S. Germann and R. Isermann, “Nonlinear distance and cruise control for passenger cars,” in Proc. American Control Conf., Seattle, WA, 1995, pp. 3081-3085.
30. H. Holzmann, C. Halfmann, S. Germann, M. Würtenberger, and R. Isermann, “Longitudinal and lateral control and supervision of autonomous intelligent vehicles,” Contr. Eng. Practice, vol. 5, pp. 1599-1605, Nov. 1997.
31. P. Chakroborty and S. Kikuchi, “Evaluation of the general motors based car-following models and a proposed fuzzy inference model,” Transport. Res.: Emerging Technologies, pt. C, vol. 7, pp. 209-235, Aug. 1999.
32. J. Gerdes and K. Hedrick, “Vehicle speed and spacing control via coordinated throttle and brake actuation,”Control Engineering Practice, vol. 5, pp. 1607-1614, Nov. 1997.
33. X. Lu, H. Tan, S. Shladover, and K. Hedrick, “Nonlinear longitudinal controller implementation and comparison for automated cars,”ASME J. Dyn. Syst., Meas., Contr., vol. 123, pp. 161-167, June 2001.
34. C. Liang and H. Peng, “Optimal adaptive cruise control with guaranteed string stability,” Veh. Syst. Dyn., vol. 31, pp. 313-330, Nov. 1999.
35. C. Liang and H. Peng, “Design and simulations of traffic-friendly adaptive cruise control algorithm,” in Proc. ASME Int. Mechanical Engineering Congr. Expo., Anaheim, CA, 1998, pp. 713-719.
36. A. Touran, M. Brackstone, and M. McDonald, “A collision model for safety evaluation of autonomous intelligent cruise control,” Accident Analysis and Prevention, vol. 31, pp. 567-578, May 1999.
37. C. Liang and H. Peng, “String stability analysis of adaptive cruise controlled vehicles,” JSME Int. J. Mechan. Syst., Machine Elements and Mfg., vol. 43, pp. 671-677, Sept. 2000.
38. A. Bose and P. Ioannou, “Evaluation of the environmental effects of intelligent cruise control vehicles,” Transport. Res. Record, vol. 1774, pp. 90-97, 2001.
39. P. Seiler, B. Song, and K. Hedrick, “Development of a Collision Avoidance System,”, SAE Paper 98PC417, 1998.
40. B. Wilson, “How soon to brake and how hard to brake: Unified analysis of the envelope of opportunity for rear-end collision warning,” presented at the Proc. Int. Technical Conf. Enhanced Safety of Vehicles, Amsterdam, The Netherlands, 2001.
41. K. Yi, M. Woo, S. Kim, and S. Lee, “Study on a road-adaptive CW/CA algorithm for automobilesusing HiL simulations,” JSME Int. J., ser. C, vol. 42, pp. 163-170, Mar. 1999.
42. K. Yi and J. Chung, “Nonlinear brake control for vehicle CW/CA systems,” IEEE/ASME Trans. Mechatron., vol. 6, pp. 17-25, Mar. 2001.
43. R. Rajamani, H. Tan, B. Law, and W. Zhang, “Demonstration of integrated longitudinal and lateral control for the operation of automated vehicles in platoons,” IEEE Trans. Control Syst. Technol., vol. 8, pp. 695-708, July 2000.
44. D. Swaroop and S. Yoon, “Integrated lateral and longitudinal vehicle control for an emergency lane change maneuver design,” Int. J. Veh. Design, vol. 21, no. 2, pp. 161-174, 1999.
45. H. Jula, E. Kosmatopoulos, and P. Ioannou, “Collision avoidance analysis for lane changing and merging,” IEEE Trans. Veh. Technol., vol. 49, pp. 2295-2308, Nov. 2000.
46. A. Eskandarian and S. Thiriez, “Collision avoidance using a cerebellar model arithmetic computer neural network,”Computer-Aided Civil Infrastructure Eng., vol. 13, pp. 303-314, Sept. 1998.
47. S. Choi and K. Hedrick, “Vehicle longitudinal control using an adaptive observer for automated highway systems,” in Proc. American Control Conf., Seattle, WA, 1995, pp. 3106-3110.
48. S. Choi and K. Hedrick, “Comparison of engine models and distance sensors for vehicle longitudinal control: Analysis and test results in PATH,” in Proc. Annu. Meet. ITS America, Washington, DC, 1995, pp. 61-68.
49. W. Schiehlen and A. Fritz, “Nonlinear cruise control concepts for vehicles in convoy,” Vehicle Syst. Dyn. Supplement, vol. 33, pp. 256-269, 1999.
50. R. Mayr, “Nonlinear vehicle distance control in longitudinal direction,” Int. J. Syst. Sci., vol. 27, pp. 705-712, Aug. 1996.
51. H. Raza, Z. Xu, B. Yang, and P. Ioannou, “Modeling and control design for a computer-controlled brake system,” IEEE Trans. Control Syst. Technol., vol. 5, pp. 279-296, May 1997.
52. M. Druzhinina, A. Stefanopoulou, and L. Moklegaard, “Compression braking control for heavy-duty vehicles,” presented at the 2000 American Control Conf., Chicago, IL, 2000.
53. M. Druzhinina, L. Moklegaard, and A. Stefanopoulou, “Speed gradient approach to longitudinalcontrol of heavy-duty vehicles equipped with variable compression brake,” IEEE Trans. ControlSyst. Technol., vol. 10, pp. 209-220, Mar. 2002.
54. M. Druzhinina, A. Stefanopoulou, and L. Moklegaard, “Adaptive continuously variable compression braking control for heavy-duty vehicles,” ASME Dyn. Syst., Meas. Contr., vol. 124, pp. 406-414, Sept. 2002.
55. M. Druzhinina and A. Stefanopoulou, “Speed control experiments for commercial heavy vehicles with coordinated friction and engine compression brakes,” presented at the Proc. American Control Conf., Anchorage, AK, 2002.
56. D. Yanakiev, J. Eyre, and I. Kanellakopoulos, “Longitudinal Control of HDVs: Experimental Evaluation,”, PATH Tech. Rep. MOU 293, 1998.
57. M. Liubakka, D. Rhode, J. Winkelman, and P. Kokotovic, “Adaptive automotive speed control,” IEEE Trans. Automat. Control, vol. 38, pp. 146-156, July 1993.
58. P. Ioannou and Z. Xu, “Throttle and Brake Control Systems for Automatic Vehicle Following,”, PATH Research Rep. UCB-ITS-PRR-94-10, 1994.
59. K. Oda, H. Takeuchi, M. Tsujii, and M. Ohba, “Practical estimator for self-tuning automotive cruise control,” in Proc. American Control Conf., Boston, MA, 1991, pp. 2066-2071.
60. D. Yanakiev and I. Kanellakopoulos, “Speed tracking and vehicle follower control design for heavy-duty vehicles,” Vehicle Syst. Dyn., vol. 25, pp. 251-276, Apr. 1996.
61. D. Yanakiev and I. Kanellakopoulos, “Longitudinal control of automated CHV's with significant actuator delays,” presented at the Proc. CDC, San Diego, CA, 1997.
62. K. Youcef-Toumi, Y. Sasage, Y. Ardini, and S. Huang, “Application of time delay control to an intelligent cruise control system,” in Proc. American Control Conf., Chicago, IL, 1992, pp. 1743-1747.
63. M. Shimakage, H. Kawazoe, O. Sadano, and T. Murakami, “Design of Lane-Keeping Control with Steering Torque Input for a Lane-Keeping Support System,”, SAE Paper no. 2001-01-0480, 2001.
64. H. Peng and M. Tomizuka, “Preview control for vehicle lateral guidance in highway automation,” ASME J. Dyn. Syst. Meas. Contr., vol. 115, pp. 679-686, Dec. 1993.
65. C. Chan and H. Tan, “Feasibility analysis of steering control as a driverassistance function in collision situations,” IEEE Trans. Intell. Transport. Syst., vol. 2, pp. 1-9, Mar. 2001.
66. Recommended Practice for a Serial Control Communications Vehicle Network, 1998.
67. R. Holve, P. Protzel, and K. Naab, “Generating fuzzy rules for the acceleration control of an adaptive cruise control system,” in Proc. Biennial Conf. North American Fuzzy Information Processing Soc., Berkeley, CA, 1996, pp. 451-455.
68. M. Goodrich and E. Boer, “Designing human-centered automation: Tradeoffs in collision avoidance system design,” IEEE Trans. Intell. Transport. Syst., vol. 1, pp. 40-54, Mar. 2000.
69. Compendium of Human Factor Projects Supporting the Intelligent Vehicle Initiative (1999). [Online]. Available: www.itsdocs.fhwa.dot.gov
70. FHWA Report, “Identification of Human Factors Research Needs,”, Washington, DC, FHWA-RD-98-178, 1998.
71. Y. Noy, “International harmonized research activities: Report of working group on intelligent transport systems (ITS),” presented at the Proc. Int. Technical Conf. Enhanced Safety of Vehicles, Amsterdam, The Netherlands, 2001.
72. R. Allen, R. Magdaleno, C. Serafin, S. Eckert, and T. Sieja, “Driver Car Following Behavior Under Test Track and Open Road Driving Condition,”, SAE Paper 970 170, 1997.
73. M. Aycin and R. Benekohal, Linear acceleration car-following model development and validation, in Transportation Research Record, vol. 1644, pp. 10-19, Nov. 1998.
74. B. Filzek and B. Breuer, “Distance behavior on motorways with regard to active safety-A comparison between adaptive-cruise-control (ACC) and driver,” presented at the Int. Technical Conf. Enhanced Safety of Vehicles, Amsterdam, The Netherlands, 2001.
75. P. Fancher, S. Bogard, M. Hagan, R. Ervin, and Z. Bareket, “Data processing procedures for identifying driver/vehicle properties associated with the control of headway,” in Proc. IEEE Conf. Intelligent Transportation Systems, Boston, MA, 1997, pp. 864-869.
76. M. Robinson and M. Carter, “Identification of driving states for the evaluation of an intelligent cruise control system,” in Proc. IEEE Conf. Intelligent Transportation Systems, Boston, MA, 1997, pp. 847-851.
77. M. Hoedemaeker, “Driving with intelligent vehicles: Driving behavior with ACC and the acceptance by individual drivers,” in Proc. IEEE Intelligent Transportation Systems Conf., Dearborn, MI, 2000, pp. 506-509.
78. N. Stanton, M. Young, and B. McCaulder, “Drive-by-wire: The case of driver workload and reclaiming control with adaptive cruise control,” Safety Sci., vol. 27, pp. 149-159, Nov. 1997.
79. S. Becker, “Panel discussion on introduction of intelligent vehicles into society: Technical, mental, and legal aspects. Mental models, expectable consumer behavior and consequences for system design and testing,” in Proc. IEEE Intelligent Vehicles Symp., Tokyo, Japan, 1996.
80. M. Goodrich, E. Boer, and H. Inoue, “A model of human brake initiation behavior with implications for ACC design,” in Proc. IEEE/IEEJ/JSAI Int. Conf. Intelligent Transportation Systems, Tokyo, Japan, 1999, pp. 86-91.
81. G. Marsden, M. McDonald, and M. Brackstone, “Toward an understanding of adaptive cruise control,” Transport. Res., pt. C, vol. 9, pp. 33-51, Feb. 2001.
82. P. Fancher, R. Ervin, Z. Bareket, G. Johnson, M. Trefalt, J. Tiedecke, and W. Hagleitner, “Intelligent cruise control: Performance studies based upon an operating prototype,” in Proc. Annu. Meet. IVHS America, Atlanta, GA, 1994, pp. 391-399.
83. J. Sayer, M. Mefford, P. Fancher, R. Ervin, and S. Bogard, “An experimental design for studying how driver characteristics influence headway control,” in Proc. IEEE Intelligent Transportation Systems Conf., Boston, MA, 1997, pp. 870-873.
84. Preliminary Human Factor Guidelines for Crash Avoidance and Warning Systems, 1996.
85. L. Levitan, M. Bunus, W. Dewing, W. Reinhart, P. Vora, and R. Llaneras, Preliminary Human Factors Guidelines for Automated Highway System Designers, 2nd ed. Washington, DC, 1997, FHWA-RD-97-125.
86. E. Donges, “A conceptual framework for active safety in road traffic,” Veh. Syst. Dyn., vol. 32, pp. 113-128, 1999.
87. N. Stanton and M. Young, “Vehicle automation and driving performance,”Ergonomics, vol. 41, pp. 1014-1028, 1998.
88. C. Serafin, “Driver preferences for adjustable distance control labels for an adaptive cruise control (ACC) system,” in Proc. 41st Annu. Meet. Human Factors and Ergonomics Soc., Albuquerque, NM, 1997, pp. 934-938.
89. R. Stapleford, D. Weir, N. Broen, D. Chiang, and R. Igarashi, “The DRI driving simulator 1997, Description and application to the study of intelligent transportation systems,” in Proc. IEEE Conf. Intelligent Transportation Systems, Boston, MA, 1997, pp. 478-483.
90. M. Lloyd, G. Wilson, C. Nowak, and C. Bittner, “Brake pulsing as haptic warning for an intersection collision avoidance countermeasure,” Transport. Res. Record, vol. 1694, pp. 34-41, 1999.
91. E. Mazzae and W. Garrott, “Development of performance specifications for collision avoidancesystems for lane change, merging, and braking: Human factors assessment of driver interfaces of existing collision avoidance systems,” presented at the NHTSA, Washington, DC, 1999.
92. K. Syverud, “Liability and Insurance Implications of IVHS Technology,”, SAE Paper 901 507, 1990.
93. J. Costantino, “Overcoming institutional barriers to IVHS,” Transport. Quarterly, vol. 48, no. 1, pp. 3-13, Winter 1994.
94. S. Khasnabis, J. Ellis, and M. Baig, “Legal implications of automated highway systems,” Transport. Quarterly, vol. 51, no. 4, pp. 47-58, Fall 1997.
95. J. Feldges, “Panel discussion on introduction of intelligent vehicles into society: Technical, mental, and legal aspects. Future driver assistance systems-Product liability and driver's responsibility,” in Proc. IEEE Intelligent Vehicles Symp., Tokyo, Japan, 1996.
96. K. Chen and R. French, “Organizational Response to Intelligent VehicleHighway Systems,”, SAE Paper 911 673, 1991.