Identification and Time-Domain Simulation of the Association Inverter-Cable-Asynchronous Machine Using Diffusive Representation

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 1, 2009, Pages 257-265

  Ben Smida, Khaled ^a   Elleuch, Mohamed ^a   Bidan, Pierre ^b,c   Lebey, Thierry ^b   Ben Ammar, Faouzi ^d  

^a UNIVERSITY OF TUNIS EL MANAR   (Tunisia)

^b Laboratoire Plasma et Conversion d'Energie   (France)

^c UNIVERSITÉ DE TOULOUSE   (France)

^d UNIVERSITY OF CARTHAGE   (Tunisia)

Author keywords

Asynchronous machines; cable; diffusive representation; finite element method (FEM); inverter drive; stator windings; transmission line; voltage front propagation

Indexed keywords

EID: 85008018777     PISSN: 02780046     EISSN: 15579948     Source Type: Journal    
DOI: 10.1109/TIE.2008.926766     Document Type: Article

References (49)

1. M. Melfi, “Low voltage PWM inverter-fed motor insulation issues,” IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 128–133, Jan./Feb. 2006.
2. M. K. W. Stranges, G. C. Stone, and D. L. Bogh, “New specs for ASD motors,” IEEE Ind. Appl. Mag., vol. 13, no. 1, pp. 37–42, Jan./Feb. 2007.
3. Rotating Eletrical Machines - Part 18-41: Qualification and Type Tests for Type I Electrical Insulation Systems Used in Rotating Electrical Machines Fed From Voltage Converters, CEI/TS 60034-18-41, 1
4. C. Petrarca, G. Lupo, L. Egiziamo, V. Tucc, and M. Vitelli, “Steep fronted overvoltages in inverter fed induction motors: Numerical identification of critical parameters,” in Proc. High Voltage Eng. Symp., Aug. 22–27, 1999, pp. 433–436.
5. M. Kaufhold, H. Aninger, M. Berth, J. Speck, and M. Eberhardt, “Electrical stress and failure mechanism of the winding insulation in PWM-inverter-fed low-voltage induction motors,” IEEE Trans. Ind. Electron., vol. 47, no. 2, pp. 396–402, Apr. 2000.
6. M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, “Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse controlled,” IEEE Electr. Insul. Mag., vol. 12, no. 5, pp. 9–16, Sep./Oct. 1996.
7. I. Boldea and S. A. Nasar, The Induction Machine Handbook. Boca Raton, FL: CRC Press, 2002.
8. P. Bidan, T. Lebey, G. Montseny, C. Neacsu, and J. Saint-Michel, “Transient voltage distribution in inverter fed motor windings: Experimental study and modeling,” IEEE Trans. Power Electron., vol. 16, no. 1, pp. 92–100, Jan. 2001.
9. A. Mbaye, F. Grigorescu, T. Lebey, and A. Bui, “Existence of partial discharges in low voltage induction machines supplied by PWM drives,” IEEE Trans. Dielectr. Electr. Insul., vol. 3, no. 4, pp. 554–560, Aug. 1996.
10. D. H. Hwang, J.-W. Jeon, Y.-J. Kim, S.-W. Bae, D.-H. Kim, M.-H. Kim, and I.-W. Lee, “Experimental comparison of insulation systems for IGBT PWM inverter fed low voltage induction motors,” in Proc. IEEE PESC, 2002, vol. 2, pp. 973–978.
11. M. Morikawa, N. Hayakawa, and H. Okubo, “Partial discharge inception and degradation characteristics of inverter fed motor sample under surge voltage condition,” in Proc. Annu. Rep. Conf. Elect. Insul. Dielectr. Phenom., 2005, pp. 426–429.
12. N. Hayakawa and H. Okubo, “Partial discharge characteristic of inverter fed motor coil samples under AC and surge voltage conditions,” IEEE Electr. Insul. Mag., vol. 21, no. 1, pp. 5–10, Jan./Feb. 2005.
13. D. Bogh, J. Coffee, and J. Custodio, “Partial discharge inception testing on low voltage motors,” IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 148–154, Jan./Feb. 2006.
14. G. C. Stone and V. Warren, “Objective methods to interpret partial-discharge data on rotating machine stator windings,” IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 195–200, Jan./Feb. 2006.
15. D. Fabiani, A. Cavallini, and C. Montanari, “Aging investigation of motor winding insulation subjected to PWM supply through PD measurements,” in Proc. Annu. Rep. Conf. Elect. Insul. Dielectr. Phenom., 2005, pp. 434–437.
16. G. C. Stone, E. A. Boulter, I. Culbert, and H. Dhirani, Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair, ser. IEEE Press Series on Power Engineering. Piscataway, NJ: Wiley-IEEE Press, 2004.
17. Y. Tang, “Analysis of steep fronted voltage distribution and turn insulation failure in inverter fed form wound AC motor,” IEEE Trans. Ind. Appl., vol. 34, no. 5, pp. 1988–1996, Sep./Oct. 1998.
18. J. Liu, P. Pillay, and H. Douglas, “Wavelet modeling of motor drives applied to the calculation of motor terminal overvoltages,” IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 61–66, Feb. 2004.
19. M. S. Ballal, Z. J. Khan, H. M. Suryawanshi, and R. L. Sonolikar, “Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor,” IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 250–258, Feb. 2007.
20. A. F. Moreira, P. M. Santos, T. A. Lipo, and G. Venkataramanan, “Filter networks for long cable drives and their influence on motor voltage distribution and common-mode currents,” IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 515–522, Apr. 2005.
21. C. Petrarca, A. Maffucci, V. Tucci, and M. Vitelli, “Analysis of the voltage distribution in a motor stator winding subjected to steep-fronted surge voltages by means of a multiconductor lossy transmission line model,” IEEE Trans. Energy Convers., vol. 19, no. 1, pp. 7–17, Mar. 2004.
22. A. Bonnett, “A comparison between insulation systems available for PWM-inverter-fed motors,” IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1131–1341, Sep. 1997.
23. M. Melfi, J. Sung, S. Bell, and G. Skibinski, “Effect of surge voltage risetime on the insulation of low voltage machines fed by PWM converters,” IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 766–775, Jul./Aug. 1998.
24. A. von Jouanne, D. A. Rendusara, P. N. Enjeti, and J. W. Gray, “Filtering techniques to minimize the effect of long motor leads on PWM inverter fed AC motor drive systems,” IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 919–926, Jul./Aug. 1996.
25. P. C. Krause and K. Carlsen, “Analysis and hybrid computer simulation of multiconductor transmission systems,” IEEE Trans. Power App. Syst., vol. PAS-91, no. 2, pp. 465–477, Mar. 1972.
26. A. F. Moreira, T. A. Lipo, G. Venkatarmanan, and S. Bernet, “Modeling and evaluation of dv/dt filters for AC drives with high switching speed,” in Proc. 9th Eur. Conf. Power Electron. Appl., Aug. 27–29, 2001, pp. 1–14.
27. A. C. Siqueira de Lina, H. W. Dommel, and R. M. Stephan, “Modeling adjustable-speed drives with long feeders,” IEEE Trans. Ind. Electron., vol. 47, no. 3, pp. 549–556, Jun. 2000.
28. V. Venegas, E. Melgoza, J. L. Guardado, R. Mota, and R. Escarel, “A time domain rotating machine model for switching overvoltage studies using network synthesis for the winding impedance,” in Proc. IEEE Int. Conf. Electr. Mach. Drives, 2005, pp. 1453–1458.
29. J. L. Guardado, J. A. Flores, V. Venegas, J. L. Naredo, and F. A. Uribe, “A machine winding model for switching transient studies using network synthesis,” IEEE Trans. Energy Corners., vol. 20, no. 2, pp. 322–328, Jun. 2005.
30. T. Humiston and P. Pillay, “Parameter measurements to study surge propagation in induction machines,” IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1341–1348, Sep./Oct. 2004.
31. M. Berth, L. Küng, and E. F. D. E. Limbeek, “Switching overvoltages in motor circuits,” IEEE Trans. Ind. Appl., vol. 37, no. 6, pp. 1582–1589, Nov./Dec. 2001.
32. C. Petrarca, G. Lupo, V. Tucci, and M. Vitelli, “MTL model and FEM package for the evaluation of steep front surges distribution in machine windings,” in Annu. Rep. Conf. Elect. Insul. Dielectr. Phenom., 2001, pp. 685–688.
33. Y. Weens, N. Idir, R. Bausiere, and J. J. Franchaud, “Modeling and simulation of unshielded and shielded energy cables in frequency and time domains,” IEEE Trans. Magn., vol. 42, no. 7, pp. 1876–1882, Jul. 2006.
34. G. Montseny, “Diffusive representation of pseudo-differential time operators,” in Proc. ESAIM, Dec. 1998, vol. 5, pp. 159–175.
35. L. Laudebat, P. Bidan, and G. Montseny, “Modeling and optimal identification of pseudodifferential electrical dynamics by means of diffusive representation—Part I: Modeling,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 51, no. 9, pp. 1801–1813, Sep. 2004.
36. G. Montseny, Representation Diffusive. Paris, France: Hermes-Lavoisier, 2005.
37. V. Venegas, R. Escarel, R. Mota, E. Melgoza, and J. L. Guardado, “Calculation of electrical parameters for transient overvoltage studies on electrical machines,” in Proc. IEEE Int. Conf. Electr. Mach. Drives, 2003, vol. 3, 1978–1982.
38. S. Wang, “Modeling and design of planar integrated magnetic components,” M.S. thesis, Univ. Polytechnic Inst. State Univ., Blacksburg, VA, Jul. 21, 2003.
39. P. Bidan, A. Rumeau, L. Laudebat, and G. Montseny, “Modeling and identification of lossy transmission lines by means of diffusive representation,” in Proc. 7th Int. Symp. Electr. Magn. Fields, Aussois, France, Jun. 19–22, 2006.
40. L. A. Saunders, G. L. Skibinski, S. T. Evon, and D. L. Kempkes, “Riding the reflected wave IGBT drive technology demands new motor and cable considerations,” in Conf. Rec. IEEE IAS Annu. Meeting, Philadelphia, PA, 1996, pp. 75–84.
41. A. Binder, “Measures to cope with AC motor insulations stress due to IGBT inverter supply,” in Proc. IEEE Int. Power Electron. Variable Speed Drives, 1996, pp. 569–574. no. 49.
42. S. Cristina and M. Feliziani, “A finite element technique for multiconductor cable parameters calculation,” IEEE Trans. Magn., vol. 25, no. 4, pp. 2986–2988, Jul. 1989.
43. J. M. Bentley and P. J. Link, “Evaluation of motor power cables for PWM AC Drives,” IEEE Trans. Ind. Appl., vol. 33, no. 2, pp. 342–358, Mar./Apr. 1997.
44. A. F. Moreira, T. A. Lipo, G. Venkatarmanan, and S. Bernet, “High frequency modeling for cable and induction motor over-voltage studies in long cable drives,” in Conf. Rec. 36th IEEE IAS Annu. Meeting, Sep./Oct. 2001, pp. 1–8.
45. T. G. Habetler, R. Naik, and T. A. Nondahl, “Design and implementation of a inverter out put LC filter used for DV/DT reduction,” IEEE Trans. Power Electron., vol. 17, no. 3, pp. 327–331, May 2002.
46. W. W. L. Keerthipala and P. G. McLaren, “A multiconductor transmission line model for surge propagation studies in large A.C. Machine windings,” in Proc. 33rd Midwest Symp. Circuits Syst., Aug. 12–14, 1990, vol. 2, pp. 629–632.
47. A. Gaudreau, P. Picher, L. Bolduc, and A. Coutu, “No-load losses in transformer under overexcitation/inrush-current conditions: Tests and a new model,” IEEE Trans. Power Del., vol. 17, no. 4, pp. 1009–1017, Oct. 2002.
48. X. Chen and S. S. Venkata, “A three-phase three-winding core-type transformer model for low-frequency transient studies,” IEEE Trans. Power Del., vol. 12, no. 2, pp. 775–782, Apr. 1997.
49. A. R. Chavez, P. Moreno, J. L. Naredo, and L. Guardado, “Fast transients analysis of nonuniform multiconductor frequency-dependent transmission lines,” IEEE Trans. Power Del., vol. 21, no. 2, pp. 809–815, Apr. 2006.