Ring-Edged Bank Array Made by Inkjet Printing for Color Filters

IEEE/OSA Journal of Display Technology

Volumn 5, Issue 5, 2009, Pages 162-165

  Lee, Yuh Zheng ^b  

^a NATIONAL CHIAO TUNG UNIVERSITY   (Taiwan)

^b INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Taiwan)

Author keywords

color; Inkjet printing (IJP); optical arrays; thin films

Indexed keywords

EID: 85008016596     PISSN: 1551319X     EISSN: 15589323     Source Type: Journal    
DOI: 10.1109/JDT.2009.2014084     Document Type: Article

References (17)

1. P. Calvert, “Inkjet printing for materials and devices,” Chem. Mater., vol. 13, no. 10, pp. 3299–3305, 2001.
2. B. J. de Gans, P. C. Duineveld, and U. S. Schuber, “Inkjet printing of polymers: State of the art and future developments,” Adv. Mater., vol. 16, no. 3, pp. 203–213, 2004.
3. H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W.Wu, and E. P.Woo, “High-resolution inkjet printing of all-polymer transistor circuits,” Science, vol. 290, pp. 2123–2126, 2000.
4. T. R. Hebner, C. C. Wu, D. Marcy, M. H. Lu, and J. C. Sturm, “Ink-jet printing of doped polymers for organic light emitting devices,” Appl. Phys. Lett., vol. 72, no. 5, pp. 519–521, Feb. 1998.
5. J. Bharathan and Y. Yang, “Polymer electroluminescent devices processed by inkjet printing: I. Polymer light-emitting logo,” Appl. Phys. Lett., vol. 72, no. 21, pp. 2660–2662, 1998.
6. Y. Yang, S. C. Chang, J. Bharathan, and J. Liu, “Organic/polymeric electroluminescent devices processed by hybrid ink-jet printing,” J. Mater. Sci., vol. 11, pp. 89–96, 2000.
7. C. J. Chang, S.-J. Chang, F.-M. Wu, M. W. Hsu, W. W. W. Chiu, and K. Chen, “Effect of compositions and surface treatment on the jetting stability and color uniformity of ink-jet printed color filter,” Jpn. J. Appl. Phys., vol. 43, no. 12, pp. 8227–8233, 2004.
8. H. S. Koo, P. C. Pan, T. Kawai, M. Chen, F. M.Wu, Y. T. Liu, and S. J. Cheng, “Physical chromaticity of colorant resist of color filter prepared by inkjet printing technology,” Appl. Phys. Lett., vol. 88, pp. 111908–, 2006.
9. H. Hu and R. G. Larson, “Analysis of the effects of Marangoni stresses on the microflow in an evaporating sessile droplet,” Langmuir, vol. 21, pp. 3972–3980, 2005.
10. R. M. Cordeiro and T. Pakula, “Behavior of evaporating droplets at nonsoluble and soluble surfaces: Modeling with molecular resolution,” J. Phys. Chem. B, vol. 109, pp. 4152–4161, 2005.
11. F. Girard, M. Antoni, S. Faure, and A. Steinchen, “Evaporation and Marangoni driven convection in small heated water droplets,” Langmuir, vol. 22, pp. 11085–11091, 2006.
12. S. Karabasheva, S. Baluschev, and K. Graf, “Microstructures on soluble polymer surfaces via drop deposition of solvent mixtures,” Appl. Phys. Lett., vol. 89, p. 031110, 2006.
13. B. J. de Gans, S. Höppener, and U. S. Schubert,, “Polymer-relief microstructures by inkjet etching,” Adv. Mater., vol. 18, pp. 910–914, 2006.
14. R. D. Deegan, O. Bakajin, T. F. Dupont, G. Huber, S. R. Nagel, and T. Witten, “Capillary flow as the cause of ring stains from dried liquid drops,” Nature, vol. 389, pp. 827–829, 1997.
15. Y. Xia and R. H. Friend, “Nonlithographic patterning through inkjet printing via holes,” Appl. Phys. Lett., vol. 90, p. 253513, 2007.
16. K. Takeo, “Method of patterning a substrate,” U.S. Patent 6 838 361, Jun. 4, 2005.
17. J. P. Lu et al.,, unpublished.