Corrigendum to “Quantifying and mapping embodied environmental requirements of urban building stocks” (Building and Environment (2017) 114 (187–202) (S0360132316304747) (10.1016/j.buildenv.2016.11.043));Quantifying and mapping embodied environmental requirements of urban building stocks

Building and Environment

Volumn 114, Issue , 2017, Pages 187-202

  Stephan, André ^a   Athanassiadis, Aristide ^a,b,c  

^a UNIVERSITY OF MELBOURNE   (Australia)

^b FUND FOR SCIENTIFIC RESEARCH   (Belgium)

^c UNIVERSITÉ LIBRE DE BRUXELLES   (Belgium)

Author keywords

Bottom up; Energy; Greenhouse gas emissions; Material stock; Melbourne; Urban and building environmental models

Indexed keywords

BUILDINGS; ECONOMICS; ENVIRONMENTAL IMPACT; GAS EMISSIONS; GREENHOUSE GASES; LAND USE; LIFE CYCLE;

BOTTOM UP; BUILDING TYPOLOGIES; ENERGY; ENVIRONMENTAL MODEL; ENVIRONMENTAL REQUIREMENT; MELBOURNE; MELBOURNE , AUSTRALIA; OPERATIONAL REQUIREMENTS;

CONSTRUCTION;

BOTTOM-UP APPROACH; BUILDING; EMISSION INVENTORY; ENVIRONMENTAL IMPACT ASSESSMENT; ENVIRONMENTAL MONITORING; GREENHOUSE GAS; MAPPING; QUANTITATIVE ANALYSIS; URBAN AREA;

AUSTRALIA; MELBOURNE; VICTORIA [AUSTRALIA];

EID: 85007110637     PISSN: 03601323     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.buildenv.2017.06.006     Document Type: Erratum

References (86)

1. [1] Grubler, A., Bai, X., Buettner, T., Dhakal, S., Fisk, D.J., Ichinose, T., et al. Chapter 18-Urban Energy Systems. Global Energy Assessment - toward a Sustainable Future. 2012, Cambridge University Press, Cambridge, UK and New York, NY, 1307–1400 USA and the International Institute for Applied Systems Analysis, Laxenburg, Austria.
2. [2] IPCC, Climate change 2014: mitigation of climate change. Edenhofer, O., Pichs-Madruga, R., Sokona, Y., Minx, J.C., Farahani, E., Kadner, S., et al. (eds.) Contribution of Working Group III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, 2014, Cambridge University Press, Cambridge.
3. [3] Horvath, A., Construction materials and the environment. Annu. Rev. Environ. Resour. 29 (2004), 181–204.
4. [4] EC Construction and Demolition Waste (CDW). European Comission, Available from: http://ec.europa.eu/environment/waste/construction_demolition.htm, 17/06/2016, 2016 (Accessed 10 August 2016).
5. [5] UNEP, Global material flows and resource productivity. An Assessment Study of the UNEP International Resource Panel. Paris: United Nations Environment Program, 2016.
6. [6] U.N. World Urbanization Prospects: the 2011 Revision, 2012, Department of Economic and Social Affairs, New York: United Nations, 318.
7. [7] Kennedy, C., Cuddihy, J., Engel-Yan, J., The changing metabolism of cities. J. Ind. Ecol. 11 (2007), 43–59.
8. [8] Zhang, Y., Urban metabolism: a review of research methodologies. Environ. Pollut. 178 (2013), 463–473.
9. [9] Athanassiadis, A., Bouillard, P., Crawford, R.H., Khan, A.Z., Towards a dynamic approach to urban metabolism: tracing the temporal evolution of Brussels' urban metabolism from 1970 to 2010. J. Ind. Ecol., 2016.
10. [10] Athanassiadis, A., Crawford, R.H., Bouillard, P., Overcoming the “black box” approach of Urban Metabolism. Crawford, R.H., Stephan, A., (eds.) Living and Learning: Research for a Better Built Environment, 49th International Conference of the Architectural Science Association, 2015, The Architectural Science Association and The University of Melbourne, Melbourne, Australia, 547–556.
11. [11] Tanikawa, H., Hashimoto, S., Urban stock over time: spatial material stock analysis using 4d-GIS. Build. Res. Inf. 37 (2009), 483–502.
12. [12] Marcellus-Zamora, K.A., Gallagher, P.M., Spatari, S., Tanikawa, H., Estimating materials stocked by land-use type in historic urban buildings using spatio-temporal analytical tools. J. Ind. Ecol. 20:5 (2016), 1025–1037.
13. [13] Tanikawa, H., Fishman, T., Okuoka, K., Sugimoto, K., The weight of society over time and space: a comprehensive account of the construction material stock of Japan, 1945–2010. J. Ind. Ecol. 19 (2015), 778–791.
14. [14] Hu, D., You, F., Zhao, Y., Yuan, Y., Liu, T., Cao, A., et al. Input, stocks and output flows of urban residential building system in Beijing city, China from 1949 to 2008. Resour. Conserv. Recycl. 54 (2010), 1177–1188.
15. [15] Fishman, T., Schandl, H., Tanikawa, H., Walker, P., Krausmann, F., Accounting for the material stock of nations. J. Ind. Ecol. 18 (2014), 407–420.
16. [16] Keirstead, J., Jennings, M., Sivakumar, A., A review of urban energy system models: approaches, challenges and opportunities. Renew. Sustain. Energy Rev. 16 (2012), 3847–3866.
17. [17] Howard, B., Parshall, L., Thompson, J., Hammer, S., Dickinson, J., Modi, V., Spatial distribution of urban building energy consumption by end use. Energ Build. 45 (2012), 141–151.
18. [18] Reinhart, C.F., Cerezo Davila, C., Urban building energy modeling – a review of a nascent field. Build. Environ. 97 (2016), 196–202.
19. [19] Kavgic, M., Mavrogianni, A., Mumovic, D., Summerfield, A., Stevanovic, Z., Djurovic-Petrovic, M., A review of bottom-up building stock models for energy consumption in the residential sector. Build. Environ. 45 (2010), 1683–1697.
20. [20] Allegrini, J., Orehounig, K., Mavromatidis, G., Ruesch, F., Dorer, V., Evins, R., A review of modelling approaches and tools for the simulation of district-scale energy systems. Renew. Sustain. Energy Rev. 52 (2015), 1391–1404.
21. [21] Cole, R.J., Kernan, P.C., Life-cycle energy use in office buildings. Build. Environ. 31 (1996), 307–317.
22. [22] Feist, W., Life-cycle energy balances compared: low-energy house, passive house, self-sufficient house. Proceedings of the International Symposium of CIB W67. Vienna, Austria, 1997, CIB W67, 183–190.
23. [23] Adalberth, K., Energy use during the life cycle of single-unit dwellings: Examples. Build. Environ. 32 (1997), 321–329.
24. [24] Sartori, I., Hestnes, A.G., Energy use in the life cycle of conventional and low-energy buildings: a review article. Energ Build. 39 (2007), 249–257.
25. [25] Ramesh, T., Prakash, R., Shukla, K.K., Life cycle energy analysis of buildings: an overview. Energ Build. 42 (2010), 1592–1600.
26. [26] Karimpour, M., Belusko, M., Xing, K., Bruno, F., Minimising the life cycle energy of buildings: review and analysis. Build. Environ. 73 (2014), 106–114.
27. [27] Crawford, R.H., Validation of a hybrid life-cycle inventory analysis method. J. Environ. Manag. 88 (2008), 496–506.
28. [28] Majeau-Bettez, G., Strømman, A.H., Hertwich, E.G., Evaluation of process- and input-output-based life cycle inventory data with regard to truncation and aggregation issues. Environ. Sci. Technol. 45 (2011), 10170–10177.
29. [29] Dixit, M.K., Culp, C.H., Fernandez-Solis, J.L., Embodied energy of construction materials: integrating human and capital energy into an IO-based hybrid model. Environ. Sci. Technol. 49 (2015), 1936–1945.
30. [30] Crawford, R.H., Life Cycle Assessment in the Built Environment. 2011, Spon Press, London.
31. [31] Crawford, R.H., Stephan, A., The significance of embodied energy in certified passive houses. ICCBM 2013: International Conference on Construction and Building Materials, 2013, World Academy of Science, Engineering and Technology, Copenhagen, 473–479.
32. [32] Stephan, A., Stephan, L., Reducing the total life cycle energy demand of recent residential buildings in Lebanon. Energy 74 (2014), 618–637.
33. [33] Treloar, G.J., Extracting embodied energy paths from input-output tables: towards an input-output-based hybrid energy analysis method. Econ. Syst. Res. 9 (1997), 375–391.
34. [34] Stephan, A., Crawford, R.H., A comprehensive life cycle water analysis framework for residential buildings. Build. Res. Inf. 42 (2014), 685–695.
35. [35] Blengini, G.A., Di Carlo, T., The changing role of life cycle phases, subsystems and materials in the LCA of low energy buildings. Energ Build. 42 (2010), 869–880.
36. [36] Crawford, R.H., Bartak, E.L., Stephan, A., Jensen, C.A., Evaluating the life cycle energy benefits of energy efficiency regulations for buildings. Renew. Sustain. Energy Rev. 63 (2016), 435–451.
37. [37] Anderson, J.E., Wulfhorst, G., Lang, W., Energy analysis of the built environment—a review and outlook. Renew. Sustain. Energy Rev. 44 (2015), 149–158.
38. [38] International Standard 14040, Environmental Management - Life Cycle Assessment - Principles and Framework. 2006, International Organization for Standardization (ISO), Geneva.
39. [39] Sharma, A., Saxena, A., Sethi, M., Shree, V., Varun, Life cycle assessment of buildings: a review. Renew. Sustain. Energy Rev. 15 (2011), 871–875.
40. [40] Chau, C.K., Leung, T.M., Ng, W.Y., A review on life cycle assessment, life cycle energy assessment and life cycle carbon emissions assessment on buildings. Appl. Energ 143 (2015), 395–413.
41. [41] P. Chastas, T. Theodosiou, D. Bikas, Embodied energy in residential buildings-towards the nearly zero energy building: A literature review, Building and Environment.
42. [42] Lotteau, M., Loubet, P., Pousse, M., Dufrasnes, E., Sonnemann, G., Critical review of life cycle assessment (LCA) for the built environment at the neighborhood scale. Build. Environ. 93:Part 2 (2015), 165–178.
43. [43] Nichols, B.G., Kockelman, K.M., Life-cycle energy implications of different residential settings: recognizing buildings, travel, and public infrastructure. Energy Policy 68 (2014), 232–242.
44. [44] Stephan, A., Crawford, R.H., de Myttenaere, K., Multi-scale life cycle energy analysis of a low-density suburban neighbourhood in Melbourne, Australia. Build. Environ. 68 (2013), 35–49.
45. [45] Pincetl, S., Chester, M., Circella, G., Fraser, A., Mini, C., Murphy, S., et al. Enabling future sustainability transitions. J. Ind. Ecol. 18 (2014), 871–882.
46. [46] Zhu, X., GIS and urban mining. Resources 3 (2014), 235–247.
47. [47] Swan, L.G., Ugursal, V.I., Modeling of end-use energy consumption in the residential sector: a review of modeling techniques. Renew. Sustain. Energy Rev. 13 (2009), 1819–1835.
48. [48] Stephan, A., Towards a Comprehensive Energy Assessment of Residential Buildings. A Multi-scale Life Cycle Energy Analysis Framework. [Ph.D. thesis], 2013, Université Libre de Bruxelles and The University of Melbourne, Brussels.
49. [49] Stephan, A., Crawford, R.H., A multi-scale life-cycle energy and greenhouse-gas emissions analysis model for residential buildings. Archit. Sci. Rev. 57 (2014), 39–48.
50. [50] Kleemann, F., Lederer, J., Rechberger, H., Fellner, J., GIS-based analysis of Vienna's material stock in buildings. J. Ind. Ecol., 2016.
51. [51] Kleemann, F., Lederer, J., Aschenbrenner, P., Rechberger, H., Fellner, J., A method for determining buildings' material composition prior to demolition. Build. Res. Inf. 44 (2016), 51–62.
52. [52] Assefa, G., Ambler, C., To demolish or not to demolish: life cycle consideration of repurposing buildings. Sustain. Cities Soc. 28 (2017), 146–153.
53. [53] The Open Data Institute. about. The Open Data Institute, 2016 Available from: https://theodi.org/about (Accessed 17 June 2016).
54. [54] Hammond, G., Jones, C., Inventory of Carbon & Energy: ICE: Sustainable Energy Research Team. 2008, Department of Mechanical Engineering, University of Bath Bath, UK.
55. [55] Frischknecht, R., Jungbluth, N., Althaus, H.-J., Doka, G., Dones, R., Heck, T., et al. The ecoinvent database: overview and methodological framework. Int. J. Life Cycle Assess. 10 (2005), 3–9.
56. [56] Treloar, G.J., Crawford, R.H., Database of Embodied Energy and Water Values for Materials. 2010, The University of Melbourne, Melbourne.
57. [57] Fay, R., Comparative Life Cycle Energy Studies of Typical Australian Suburban Dwellings. 1999, University of Melbourne, Australia.
58. [58] J-C. Du Bellay, D. Gauzin-Mueller, R. Hoyet, M. Zacek, Neufert, Paris, Dunod, 2006.
59. [59] Suh, S., Lenzen, M., Treloar, G.J., Hondo, H., Horvath, A., Huppes, G., et al. System boundary selection in life-cycle inventories using hybrid approaches. Environ. Sci. Technol. 38 (2004), 657–664.
60. [60] Treloar, G.J., A Comprehensive Embodied Energy Analysis Framework. [Ph.D. Thesis], 1998, Deakin University, Geelong.
61. [61] Lenzen, M., Treloar, G.J., Endogenising capital: a comparison of two methods. J. Appl. Input Output Anal., 10, 2004, 10.
62. [62] Rauf, A., Crawford, R.H., Building service life and its effect on the life cycle embodied energy of buildings. Energy 79 (2015), 140–148.
63. [63] Hashimoto, S., Tanikawa, H., Moriguchi, Y., Framework for estimating potential wastes and secondary resources accumulated within an economy – a case study of construction minerals in Japan. Waste Manag. 29 (2009), 2859–2866.
64. [64] Goldstein, B.P., Herbøl, M., Figueroa, M.J., Gaps in tools assessing the energy implications of renovation versus rebuilding decisions. Curr. Opin. Environ. Sustain. 5 (2013), 244–250.
65. [65] Weisz, H., Steinberger, J.K., Reducing energy and material flows in cities. Curr. Opin. Environ. Sustain. 2 (2010), 185–192.
66. [66] ABS, Census of Population. 2011, Australian Bureau of Statistics Available from: http://www.abs.gov.au/websitedbs/censushome.nsf/home/census?opendocument&navpos=10 (Accessed 29 September 2014).
67. [67] BITRE, Population Growth, Jobs Growth and Commuting Flows in Melbourne., 2011, Canberra ACT: Bureau of Infrastructure, Transport and Regional Economics, 404 Melbourne, Report 125.
68. [68] City of Melbourne, Census of Land Use and Employment. 2015 ed., 2015 Melbourne.
69. [69] City of Melbourne, Open Data. City of Melbourne. 2016 Available from: http://www.melbourne.vic.gov.au/about-council/governance-transparency/Pages/Open-data.aspx (Accessed 22 June 2016).
70. [70] Fuller, R., Crawford, R.H., Impact of past and future residential housing development patterns on energy demand and related emissions. J. Hous. Built Environ. 26 (2011), 165–183.
71. [71] Seo, S., Foliente, G., Lipkin, F., Yum, K.-K., Anticev, J., Egan, S., et al. Inner Melbourne Energy Consumption 2011-2026: Baseline and Future Scenarios Forecasts for the Residential and Commercial Sectors. 2014, CSIRO, Melbourne.
72. [72] Stephan, A., Athanassiadis, A., Properties of the 48 Building Archetypes Used to Characterise the Building Stock of the City of Melbourne, Australia. 2016, Figshare, 10.6084/m9.figshare.3464099.v2, 27/06/2016 (Accessed 10 August 2016), Available from:.
73. [73] Stephan, A., Athanassiadis, A., Construction Assemblies Used in 48 Building Archetypes Representing the Current Building Stock of the City of Melbourne, Australia. 2016, Figshare, 10.6084/m9.figshare.3464096, 27/06/2016 (Accessed 10 August 2016), Available from:.
74. [74] Richardson, J.N., Coelho, R.F., Adriaenssens, S., A unified stochastic framework for robust topology optimization of continuum and truss-like structures. Eng. Optim. 48 (2016), 334–350.
75. [75] Valipour, M., Optimization of neural networks for precipitation analysis in a humid region to detect drought and wet year alarms. Meteorol. Appl. 23 (2016), 91–100.
76. [76] Powell, M.J.D., A direct search optimization method that models the objective and constraint functions by linear interpolation. Gomez, S., Hennart, J.-P., (eds.) Advances in Optimization and Numerical Analysis, 1994, Springer Netherlands, Dordrecht, 51–67.
77. [77] Powell, M.J.D., Direct search algorithms for optimization calculations. Acta Numer. 7 (1998), 287–336.
78. [78] Powell, M.J.D., A View of Algorithms for Optimization without Derivatives. Cambridge University Technical Report., 2007, Cambridge University, Cambridge.
79. [79] Treloar, G.J., McCoubrie, A., Love, P.E.D., Iyer-Raniga, U., Embodied energy analysis of fixtures, fittings and furniture in office buildings. Facilities 17 (1999), 403–409.
80. [80] Crawford, R.H., Post-occupancy life cycle energy assessment of a residential building in Australia. Archit. Sci. Rev. 57 (2013), 114–124.
81. [81] Pesonen, H., Ekvall, T., Fleischer, G., Huppes, G., Jahn, C., Klos, Z., et al. Framework for scenario development in LCA. Int. J. Life Cycle Assess. 5 (2000), 21–30.
82. [82] Wallsten, B., Magnusson, D., Andersson, S., Krook, J., The economic conditions for urban infrastructure mining: using GIS to prospect hibernating copper stocks. Resour. Conserv. Recycl. 103 (2015), 85–97.
83. [83] Wu, H., Wang, J., Duan, H., Ouyang, L., Huang, W., Zuo, J., An innovative approach to managing demolition waste via GIS (geographic information system): a case study in Shenzhen city. China. J. Clean. Prod. 112:Part 1 (2016), 494–503.
84. [84] Realff, M.J., Ammons, J.C., Newton, D.J., Robust reverse production system design for carpet recycling. IIE Trans. 36 (2004), 767–776.
85. [85] Yamasue, E., Minamino, R., Tanikawa, H., Daigo, I., Okumura, H., Ishihara, K.N., et al. Quality evaluation of steel, aluminum, and road material recycled from end-of-life urban buildings in Japan in terms of total material requirement. J. Ind. Ecol. 17 (2013), 555–565.
86. [86] Le Moigne, J.-L., La modélisation des systèmes complexes. Nouv. éd, (eds.), 1999, Dunod, Paris.