Some perspectives on enhanced heat transfer-second-generation heat transfer technology

Journal of Heat Transfer

Volumn 110, Issue 4, 1988, Pages 1082-1097

  Bergles, A E ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Augmentation and enhancement; Boiling; Condensation; Reviews

Indexed keywords

EID: 85004525878     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.3250612     Document Type: Article

References (93)

1. Alberger Heater Company, 1921, Catalog No. 3, Buffalo, NY.
2. Arai, N., Fukushima, T., Arai, A., Nakajima, T., Fujie, K., and Nakayama, Y., 1977, -Heat Transfer Tubes Enhancing Boiling and Condensation in Heat Exchanger of a Refrigerating Machine,— ASHRAE Transactions, Vol. 83, Pt. 2, pp. 58-70.
3. Ayub, Z. H., 1986, -Pool Boiling From GEWA Surfaces in Water and R-113,— Ph.D. Dissertation, Iowa State University, Ames, IA.
4. Ayub, Z. H., and Bergles, A. E., 1987, -Pool Boiling From GEWA Surfaces in Water and R-113,— Wdrme-und Stoffiibertragung, Vol. 21, pp. 209-219.
5. Ayub, Z. H., and Bergles, A. E., 1988, -Nucleate Pool Boiling Curve Hysteresis for GEWA-T Surfaces in Saturated R-113,— ASME Proceedings of the Heat Transfer Conference, HTD-Vol. 96, Vol. 2, pp. 515-521.
6. Baustian, J. T., Pate, M. B., and Bergles, A. E., 1988, -Measuring the Concentration of a Flowing Oil-Refrigerant Mixture: Instrument Test Facility and Initial Results,— ASHRAE Transactions, Vol. 94, Pt. 1, pp. 167-177.
7. Bergles, A. E., 1978, -Enhancement of Heat Transfer,— Heat Transfer 1978, Proceedings, 6th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, Vol. 6, pp. 89-108.
8. Bergles, A. E., 1983, -Augmentation of Heat Transfer,— Heat Exchanger Design Handbook, Vol. 2, Hemisphere Publishing Corp., Washington, DC, pp. 2.5.11-1-12.
9. Bergles, A. E., 1985, -Techniques to Augment Heat Transfer,— Handbook of Heat Transfer Applications, McGraw-Hill, New York, NY, pp. 31-80.
10. Bergles, A. E., 1987, -Heat Transfer Enhancement-Application to High-Temperature Heat Exchangers,— Heat Transfer in High Technology and Power Engineering, Hemisphere Publishing Corp., Washington, DC; Springer-Verlag, Berlin, Federal Republic of Germany, pp. 333-355.
11. Bergles, A. E., Nirmalan, V., Junkhan, G. H., and Webb, R. L., 1983, -Bibliography on Augmentation of Convective Heat and Mass Transfer-II,— HTL-31, ISU-ERI-Ames-84222, DE-84018484, Iowa State University, Ames, IA.
12. Bergles, A. E., Nelson, R. M., Junkhan, G. H., and Webb, R. L., 1984, -Assessment, Development and Coordination of Technology Base Studies in Enhanced Heat Transfer,— HTL-33, ISU-ERI-Ames-85024, DE-85004130, Iowa State University, Ames, IA.
13. Bergles, A. E., and Chyu, M. C., 1982, -Characteristics of Nucleate Boiling From Porous Metallic Coatings,— ASME JOURNAL OF HEAT TRANSFER, Vol. 104, pp. 279-285.
14. Chyu, M. C., 1984, -Falling Film Evaporation on Horizontal Tubes With Smooth and Structured Surfaces,— Ph.D. Dissertation, Iowa State University, Ames, IA.
15. Chyu, M. C., and Bergles, A. E., 1985, -Enhancement of Horizontal Tube Spray Film Evaporators by Structured Surfaces,— Advances in Enhanced Heat Transfer-1985, HTD-Vol. 43, ASME, New York, pp. 39-48.
16. Czikk, A. M., Gottzmann, C. F., Ragi, E. G., Withers, J. G., and Habdas, E. P., 1970, -Performance of Enhanced Heat Transfer Tubes in Refrigerant-Flooded Liquid Coolers,— ASHRAE Transactions, Vol. 1, Pt. 1, pp. 96-109.
17. Czikk, A. M., and O’Neill, P. S., 1979, -Correlations of Nucleate Boiling From Porous Metal Films,— Advances in Enhanced Heat Transfer, ASME, New York, pp. 53-60.
18. Dipprey, D. G., and Sabersky, R. H., 1963, -Heat and Momentum Transfer in Smooth and Rough Tubes at Various Prandtl Numbers,— International Journal of Heat and Mass Transfer, Vol. 6, pp. 329-353.
19. Fagerholm, N.-E., Kivioja, K., Ghazanfari, A.-R., and Jarvinen, E., 1985, -Using Structured Surfaces to Enhance Heat Transfer in Falling Film Flow,— I.I.F.-I.I.R.-Commission E2 Trondheim (Norway), pp. 187-192.
20. Ganeshan, S., and Raja Rao, M., 1982, -Studies on Thermohydraulics of Single and Multistart Spirally Corrugated Tubes for Water and Time-Independent Power Law Fluids,— International Journal of Heat and Mass Transfer, Vol. 25, pp. 1013-1022.
21. Gee, D. L., and Webb, R. L., 1980, -Forced Convection Heat Transfer in Helically Rib-Roughened Tubes,— International Journal of Heat and Mass Transfer, Vol. 23, pp. 1127-1136.
22. Gottzmann, C. F., O’Neill, P. S., and Minton, P. E., 1973, -High Efficiency Heat Exchangers,— Chemical Engineering Progress, Vol. 69, No. 7, pp. 69-75.
23. Groeneveld, D. C., and Yousef, W. W., 1980, -Spacing Devices for Nuclear Fuel Bundles; A Survey of Their Effect on CHF, Post-CHF Heat Transfer and Pressure Drop,— Proceedings of the ANS/ASME/NRC International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, NUREGI/CP 0014, Vol. 2, pp. 1111-1130.
24. Hillis, D. L., Lorenz, J. J., Yung, D. T., and Sather, N. F., 1979, -OTEC Performance Tests of the Union Carbide Sprayed-Bundle Evaporator,— ANL/OTEC-PS-3, Argonne National Laboratory, Argonne, IL.
25. Hung, Y. H., Liou, T. M., and Syang, Y. C., -Heat Transfer Enhancement of Turbulent Flow in Pipes With an Internal Circular Rib,— Advances in Enhanced Heat Transfer-1987, HTD-Vol. 68, pp. 55-63.
26. Jakob, M., and Fritz, W., 1931, -Versuche iiber den Verdamp-fungsvorgang,— Forschung auf dem Gebiete des Ingenieurwesens, Vol. 2, pp. 435-447.
27. Joshi, H. M., and Webb, R. L., 1987, -Heat Transfer and Friction in the Offset Strip-Fin Heat Exchanger,— International Journal of Heat and Mass Transfer, Vol. 30, pp. 69-84.
28. Joule, J. P., -On the Surface-Condensation of Steam,— 1861, Philosophical Transactions of the Royal Society of London, Vol. 151, pp. 133-160.
29. Kays, W. M., 1972, -Compact Heat Exchangers,— AGARD Lecture Series No. 57, Heat Exchangers, AGARD-LS-57-72.
30. Kays, W. M., and London, A. L., 1984, Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York.
31. Kelkar, K. M., and Patankar, S. V., 1985, -Numerical Prediction of Heat Transfer and Fluid Flow in Rectangular Offset-Fin Arrays,— Augmentation of Heat Transfer in Energy Systems, HTD-Vol. 52, ASME, New York, pp. 21-28.
32. Khanpara, J. C., Bergles, A. E., and Pate, M. B., 1985, -Augmentation of R-113 In-Tube Condensation With Micro-Fin Tubes,— Heat Transfer in Air Conditioning and Refrigeration Equipment, HTD-Vol. 65, ASME, New York, pp. 21-32.
33. Khanpara, J. C., Bergles, A. E., and Pate, M. B., 1986, -Augmentation of R-113 In-Tube Evaporation With Micro-Fin Tubes,— ASHRAE Transactions, Vol. 92, Part 2B, pp. 506-524.
34. Kim, C.-J., and Bergles, A. E., 1985, -Structured Surfaces for Enhanced Nucleate Boiling,— HTL-36, ISU-ERI-Ames-86220, Iowa State University, Ames, IA.
35. Kitto, J. B., and Albrecht, M. J., 1988, -Elements of Two-Phase Flow in Fossil Boilers,— Two-Phase Flow Exchangers: Thermal Hydraulic Fundamentals and Design, Kluwer Academic Publishers, The Netherlands, pp. 495-551.
36. Kulacki, F. A., 1981, -Electrohydrodynamic Enhancement of Convective Heat and Mass Transfer,— Advances in Transport Processes, Vol. 2, Halstead Press, New York, pp. 105-147.
37. Kurosaki, Y., Kashiwagi, T., Kobayashi, H., Uzuhashi, H., and Tang, S.-C., 1988, -Experimental Study on Heat Transfer From Parallel Louvered Fins by Laser Holographic Interferometry,— Experimental Thermal and Fluid Science, Vol. 1, pp. 59-67.
38. Lea, R. B., 1921, -Oil Cooler,— US Patent No. 1, 367, 881.
39. Lewis, M. J., 1975, -An Elementary Analysis for Predicting the Momentum-and Heat-Transfer Characteristics of a Hydraulically Rough Surface,— ASME JOURNAL OF HEAT TRANSFER, Vol. 97, p. 249-254.
40. Li, H. M., Ye, K. S., Tan Y. K., and Deng, S. J., 1982, -Investigations on Tube-Side Flow Visualization, Friction Factors and Heat Transfer Characteristics of Helical-Ridging Tubes,— Heat Transfer 1982, Proceedings, 7th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, Vol. 3, pp. 75-80.
41. Loehrke, R. I., and Lane, J. C., 1982, -Heat Flow Through an Array of Interrupted, Parallel Plates,— Heat Transfer 1982, Proceedings, 7th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, Vol. 3, pp. 81-86.
42. Lorenz, J. J., Yung, D., Howard, P. A., Panchel, C. B., and Poucher, F. W., 1981, -OTEC-1 Power System Test Program: Performance of One-Megawatt Heat Exchangers,— ANL/OTEC-PS-IO, Argonne National Laboratory, Argonne, IL.
43. Lewis, L. G., and Sather, N. F., 1978, -OTEC Performance Tests of the Union Carbide Flooded-Bundle Evaporator,— ANL-OTEC-PS-1, Argonne National Laboratory, Argonne, IL.
44. Mascone, C. F., 1986, -CPI Strive to Improve Heat Transfer in Tubes,— Chemical Engineering, Feb., pp. 22-25.
45. Ma, C.-F., and Bergles, A. E., 1983, -Boiling Jet Impingement Cooling of Simulated Microelectronic Chips,— Heat Transfer in Electronic Equipment, HTD-Vol. 28, ASME, New York, pp. 5-12.
46. Manglik, R. M., and Bergles, A. E., 1987, “A Correlation for Laminar Flow Enhanced Heat Transfer in Uniform Wall Temperature Circular Tubes With Twisted-Tape Inserts,” Advances in Enhanced Heat Transfer-1987, HTD-Vol. 68, ASME, New York, pp. 35-45.
47. Marner, W. J., and Webb, R. L., 1983, -A Bibliography on Gas-Side Fouling,— Proceedings of the ASME-JSME Thermal Engineering Joint Conference, Vol. 1, pp. 559-570.
48. Marto, P. J., 1986, -Recent Progress in Enhancing Film Condensation Heat Transfer on Horizontal Tubes,— Heat Transfer 1986, Proceedings, 8th International Heat Transfer Conference, Vol. 1, Hemisphere Publishing Corp., Washington, DC, pp. 161-170.
49. Marto, P. J., and Hernandez, B., 1983, -Nucleate Pool Boiling Characteristics of a GEWA-T Surface in Freon-113,— AIChE Symposium Series, No. 225, Vol. 79, pp. 1-10.
50. McManus, S. M., Marto, P. J., and Wanniarachchi, A. S., 1986, -An Evaluation of Enhanced Heat Transfer Tubing for Use in R-114 Water Chillers,— Heat Transfer in Air Conditioning and Refrigeration Equipment, HTD-Vol. 65, ASME, New York, pp. 11-19.
51. Menze, K., 1988, Wieland-Werke, Ulm, Federal Republic of Germany, Personal Communication, Feb. 4.
52. Mochizuki, S., Yagi, Y., and Yang, W.-J., 1988, -Flow Pattern and Turbulence Intensity in Stacks of Interrupted Parallel-PIate Surfaces,— Experimental Thermal and Fluid Science, Vol. 1, pp. 51-57.
53. Mori, Y., and Nakayama, W., 1980, -Recent Advances in Compact Heat Exchangers in Japan,— Compact Heat Exchangers-History, Technological Advancement and Mechanical Design Problems, HTD-Vol. 10, ASME, New York, pp. 5-16.
54. Mullisen, R. S., and Loehrke, R. I., 1986, -A Study of the Flow Mechanisms Responsible for Heat Transfer Enhancement in Interrupted-Plate Heat Exchangers,— ASME JOURNAL OF HEAT TRANSFER, Vol. 108, pp. 377-385.
55. Nakayama, W., Daikoku, T., Kuwhara, H., and Nakajima, T., 1980, -Dynamic Model of Enhanced Boiling Heat Transfer on Porous Surfaces, Part II: Analytical Modeling,— ASME JOURNAL OF HEAT TRANSFER, Vol. 102, pp. 451-456.
56. Nakayama, W., 1982, -Enhancement of Heat Transfer,— Heat Transfer 1982, Proceedings, 7th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, Vol. 1, pp. 223-240.
57. Nakayama, W., Takahashi, K., and Daikoku, T., 1983, -Spiral Ribbing to Enhance Single-Phase Heat Transfer Inside Tubes,— ASME-JSME Thermal Engineering Joint Conference Proceedings, Vol. 1, pp. 365-372.
58. Newton, I., (anon.), 1701, -Scala Graduum Caloris,— The Philosophical Transactions of the Royal Society of London, Vol. 22, 1701, pp. 824-829; translated from the Latin in The Philosophical Transactions of the Royal Society of London, abridged, Vol. IV (1694-1702), London, 1809, pp. 572-575.
59. O’Neill, P. S., Gottzmann, C. F., and Turbot, J. W., 1972, -Novel Heat Exchanger Increases Cascade Cycle Efficiency for Natural Gas Liquefaction,— Advances in Cryogenic Engineering, Vol. 17, pp. 420-437.
60. O’Neill, P. S., King, R. C., and Ragi, E. G., 1980, -Application of High Performance Evaporator Tubing in Refrigeration Systems of Large Olefins Plants,— AIChE Symposium Series, No. 199, Vol. 76, pp. 289-300.
61. Park, K. A., and Bergles, A. E., 1986, -Boiling Heat Transfer Characteristics of Simulated Microelectronic Chips With Detachable Heat Sinks,— Heat Transfer 1986, Proceedings, 8th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, Vol. 4, pp. 2099-2104.
62. Ravigururajan, T. S., and Bergles, A. E., 1985, -General Correlations for Pressure Drop and Heat Transfer for Single-Phase Turbulent Flow in Internally Ribbed Tubes,— Augmentation of Heat Transfer in Energy Systems, HTD-Vol. 52, ASME, New York, pp. 9-20.
63. Rudy, T. M., and Webb, R. L., 1985, -An Analytical Model to Predict Condensate Retention on Horizontal Integral-Fin Tubes,— ASME JOURNAL OF HEAT TRANSFER, Vol. 107, pp. 361-368.
64. Sauer, H. S., Davidson, G. W., and Chungrungreong, S., 1980, -Nucleate Boiling of Refrigerant-Oil Mixtures From Finned Tubing,— ASME Paper No. 80-HT-lll.
65. Sartor, W. E., 1982, “Extended and Enhanced Tube Surfaces to Improve Heat Transfer, 5 ’ Proceedings of the Second Symposium on Shell and Tube Heat Exchangers, Houston, TX, pp. 411-418.
66. Sethumadhavan, R., and Raja Rao, M., 1986, -Turbulent Flow Friction and Heat Transfer Characteristics of Single-and Multistart Spirally Enhanced Tubes,— ASME JOURNAL OF HEAT TRANSFER, Vol. 108, pp. 55-61.
67. Schlager, L. M., Pate, M. B., and Bergles, A. E., 1987, -A Survey of Refrigerant Heat Transfer and Pressure Drop Emphasizing Oil Effects and InTube Augmentation,— ASHRAE Transactions, Vol. 93, Part 1, pp. 392-416.
68. Schlager, L. M., Pate, M. B., and Bergles, A. E., 1988, -Evaporation and Condensation of Refrigerant-Oil Mixtures in a Low-Fin Tube,— ASHRAE Transactions, Vol. 94, Part 1.
69. Simoneau, R. J., 1987, -Heat Transfer in Aeropropulsion Systems,— Heat Transfer in High Technology and Power Engineering, Hemisphere Publishing Corp., Washington, DC; Springer-Verlag, Berlin, Federal Republic of Germany, pp. 285-319.
70. Sparrow, E. M., and Haliloo, A., 1980, -Measurements of Heat Transfer and Pressure Drop for an Array of Staggered Plates Aligned Parallel to an Air Flow,— ASME JOURNAL OF HEAT TRANSFER, Vol. 102, pp. 426-432.
71. Stephan, K., and Mitrovic, J., 1981, -Heat Transfer in Natural Convective Boiling of Refrigerants and Refrigerant-Oil-Mixtures in Bundles of T-Shaped Finned Tubes,— Advances in Enhanced Heat Transfer-1981, HTD-Vol. 18, ASME, New York, pp. 131-146.
72. Stephan, K., and Mitrovic, J., 1982, -Heat Transfer in Natural Convective Boiling of Refrigerant-Oil Mixtures,— Heat Transfer 1982, Proceedings, 7th International Heat Transfer Conference, Hemisphere Publishing Corp., Washington, DC, Vol. 4, pp. 73-87.
73. Tatara, R. A., and Payvar, P., 1986, -Pressure Drop and Heat Transfer Measurements of Boiling Refrigerant in Normal Flow Through a Porous Coated Tube Bundle,— Heat Transfer in Air Conditioning and Refrigerant Equipment, HTD-Vol. 65, ASME, New York, pp. 1-9.
74. Thome, J. R., 1988, -Application of Enhanced Boiling Tubes to Reboilers,— Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kluwer Academic Pub., The Netherlands, pp. 747-778.
75. Torii, T., Hirasawa, S., Kuwahara, H., Yanagida, T., and Fujie, K., 1978, -The Use of Heat Exchangers With Thermoexcel’s Tubing in Ocean Thermal Energy Power Plants,— ASME Paper No. 78-WA/HT-65.
76. Wanniarachchi, A. S., Marto, P. J., and Reilly, J. T., 1986, -The Effect of Oil Contamination on the Nucleate Pool-Boiling Performance of R-114 From a Porous Coated Surface,— ASHRAE Transactions, Vol. 92, Pt. 2B, pp. 525-538.
77. Wassel, A. T., and Mills, A. F., 1979, -Calculation of Variable Property Turbulent Friction and Heat Transfer in Rough Pipes,— ASME JOURNAL OF HEAT TRANSFER, Vol. 101, pp. 469-474.
78. Webb, R. L., Rudy, T. M., and Kedzierski, M. A., 1985, -Prediction of the Condensation Coefficient on Horizontal Integral-Fin Tubes,— ASME JOURNAL OF HEAT TRANSFER, Vol. 107, pp. 369-376.
79. Webb, R. L., 1984, -Shell-Side Condensation in Refrigerant Condensers,— ASHRAE Transactions, Vol. 90, Pt. 1, pp. 5-24.
80. Webb, R. L., 1979, -Toward a Common Understanding of the Performance and Selection of Roughness for Forced Convection,— Studies in Heat Transfer, Hemisphere Publishing Corp., Washington, DC, pp. 257-272.
81. Webb, R. L., and Bergles, A. E., 1983, -Performance Evaluation Criteria for Selection of Heat Transfer Surface Geometries Used in Low Reynolds Number Heat Exchangers,— Low Reynolds Number Heat Exchangers, Hemisphere Publishing Corp., Washington, DC; Springer-Verlag, Berlin, Federal Republic of Germany, pp. 735-752.
82. Webb, R. L., Bergles, A. E., and Junkhan, G. H., 1984, -Bibliography of U.S. Patents on Augmentation of Convective Heat and Mass Transfer-II,— HTL-32, ISU-ERI-Ames-84257, Iowa State University, Ames, IA.
83. Webb, R. L., 1980, -Air-Side Heat Transfer in Finned Tube Heat Exchangers,— Heat Transfer Engineering, Vol. 1, No. 3, pp. 33-49.
84. Webb, R. L., 1981, -The Evolution of Enhanced Surface Geometries for Nucleate Boiling,— Heat Transfer Engineering, Vol. 2, Nos. 3-4, pp. 46-69.
85. Webb, R. L., 1983, -Nucleate Boiling in Porous Coated Surfaces,— Heat Transfer Engineering, Vol. 4, Nos. 3-4, pp. 71-82.
86. Webb, R. L., Eckert, E. R. G., and Goldstein, R. J., 1971, -Heat Transfer and Friction in Tubes With Repeated-Rib Roughness,— International Journal of Heat and Mass Transfer, Vol. 14, pp. 601-618.
87. White, F., 1984, Heat Transfer, Addison-Wesley Publishing Company, Reading, MA.
88. Whitham, J. M., 1896, -The Effect of Retarders in Fin Tubes of Steam Boilers,— Street Railway Journal, Vol. 12, p. 374.
89. Wieting, A. R., 1975, -Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Rectangular Offset-Fin Plate-Fin Heat Exchangers,— ASME JOURNAL OF HEAT TRANSFER, Vol. 97, pp. 488-490.
90. Withers, J. A., 1980a, -Tube-Side Heat Transfer and Pressure Drop for Tubes Having Helical Ridging With Turbulent/Transitional Flow of SinglePhase Fluid, Part 1. Single-Helix Ridging,— Heat Transfer Engineering, Vol. 2, No. 1, pp. 48-61.
91. Withers, J. A., 1980b, -Tube-Side Heat Transfer and Pressure Drop for Tubes Having Helical Internal Ridging With Turbulent/Transitional Flow of Single-Phase Fluid. Part 2. Multiple-Helix Ridging,— Heat Transfer Engineering, Vol. 2, No. 2, pp. 43-50.
92. Yilmaz, S., Palen, J. W., and Taborek, J., 1981, -Enhanced Boiling Surfaces as Single Tubes and Bundles,— Advances in Enhanced Heat Transfer-1981, HTD-Vol. 18, ASME, New York, pp. 123-129.
93. Yilmaz, S., Hwalck, J. J., and Westwater, J. N., 1980, -Pool Boiling Heat Transfer Performance for Commercial Enhanced Tube Surfaces,— ASME Paper No. 80-HT-41.