H2S adsorption onto Cu-Zn–Ni nanoparticles loaded activated carbon and Ni-Co nanoparticles loaded γ-Al2O3: Optimization and adsorption isotherms

Journal of Colloid and Interface Science

Volumn 490, Issue , 2017, Pages 553-561

  Daneshyar, A ^a   Ghaedi, M ^b   Sabzehmeidani, M M ^b  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b YASOUJ UNIVERSITY   (Iran)

Author keywords

Adsorption; Co Ni Al2O3; Cu Zn Ni AC; Hydrogen sulfide (H2S); Isotherm and thermodynamic study; Natural gas

Indexed keywords

ACTIVATED ALUMINA; ACTIVATED CARBON; ADSORBENTS; ADSORPTION; ALUMINUM OXIDE; BINARY ALLOYS; COBALT ALLOYS; COPPER COMPOUNDS; DESULFURIZATION; ENAMELS; ENERGY DISPERSIVE SPECTROSCOPY; FIELD EMISSION MICROSCOPES; GAS ADSORPTION; HYDROGEN SULFIDE; NANOPARTICLES; NATURAL GAS; NICKEL COMPOUNDS; PHYSISORPTION; SCANNING ELECTRON MICROSCOPY; SULFUR COMPOUNDS; SULFUR DETERMINATION; X RAY DIFFRACTION; ZINC COMPOUNDS;

COBALT AND NICKELS; CORRELATION COEFFICIENT; ENERGY DISPERSIVE X RAY SPECTROSCOPY; FIELD EMISSION SCANNING ELECTRON MICROSCOPY; NUMERICAL VALUES; OPTIMUM CONDITIONS; SETTING CONDITION; THERMODYNAMIC STUDIES;

NICKEL SILVER;

ACTIVATED CARBON; ADSORBENT; ALUMINUM OXIDE; COBALT; COBALT NANOPARTICLE; COPPER NANOPARTICLE; HYDROGEN SULFIDE; NANOCOMPOSITE; NATURAL GAS; NICKEL NANOPARTICLE; UNCLASSIFIED DRUG; ZINC; ZINC NANOPARTICLE;

ADSORPTION; ARTICLE; CORRELATION COEFFICIENT; CRYSTAL STRUCTURE; ENERGY DISPERSIVE X RAY SPECTROSCOPY; FIELD EMISSION SCANNING ELECTRON MICROSCOPY; FLOW RATE; GAS FLOW; MORPHOLOGY; PRESSURE; PRIORITY JOURNAL; PROCESS OPTIMIZATION; SURFACE PROPERTY; TEMPERATURE; X RAY DIFFRACTION;

EID: 84999672266     PISSN: 00219797     EISSN: 10957103     Source Type: Journal    
DOI: 10.1016/j.jcis.2016.11.068     Document Type: Article

References (57)

1. [1] Fortuny, M., Baeza, J.A., Gamisans, X., Casas, C., Lafuente, J., Deshusses, M.A., et al. Biological sweetening of energy gases mimics in biotrickling filters. Chemosphere 71 (2008), 10–17.
2. [2] Gabriel, D., Cox, H.H.J., Deshusses, M.A., Conversion of full-scale wet scrubbers to biotrickling filters for H2S control at publicly owned treatment works. J. Environ. Eng. 130 (2004), 1110–1117.
3. [3] Lee, E.-K., Jung, K.-D., Joo, O.-S., Shul, Y.-G., Influence of iron precursors on catalytic wet oxidation of H2S to sulfur over Fe/MgO catalysts. J. Mol. Catal. A Chem. 239 (2005), 64–67.
4. [4] Ustinov, E.A., Staudt, R., Do, D.D., Herbst, A., Harting, P., Multicomponent adsorption on activated carbons under supercritical conditions. J. Colloid Interf. Sci. 275 (2004), 376–385.
5. [5] Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R.B., Bland, A.E., et al. Progress in carbon dioxide separation and capture: a review. J. Environ. Sci. 20 (2008), 14–27.
6. [6] Abatzoglou, N., Boivin, S., A review of biogas purification processes. Biofuels Bioprod. Biorefining. 3 (2009), 42–71.
7. [7] Ghaedi, M., Sadeghian, B., Pebdani, A.A., Sahraei, R., Daneshfar, A., Duran, C., Kinetics, thermodynamics and equilibrium evaluation of direct yellow 12 removal by adsorption onto silver nanoparticles loaded activated carbon. Chem. Eng. J. 187 (2012), 133–141.
8. [8] Lu, G.Q., Da Costa, J.C.D., Duke, M., Giessler, S., Socolow, R., Williams, R.H., et al. Inorganic membranes for hydrogen production and purification: a critical review and perspective. J. Colloid Interf. Sci. 314 (2007), 589–603.
9. [9] Rakmak, N., Wiyaratn, W., Bunyakan, C., Chungsiriporn, J., Synthesis of Fe/MgO nano-crystal catalysts by sol–gel method for hydrogen sulfide removal. Chem. Eng. J. 162 (2010), 84–90.
10. [10] Wang, R., Investigation on a new liquid redox method for H2S removal and sulfur recovery with heteropoly compound. Sep. Purif. Technol. 31 (2003), 111–121.
11. [11] N. Wang, An Investigation of H2S Adsorption Mechanisms on Tire Derived Rubber Particles (TDRP TM), 2010.
12. 3 sorbent. Ind. Eng. Chem. Res. 33 (1994), 1786–1791.
13. 2. Chem. Lett., 1982, 1463–1466.
14. [14] Xiao, Y., Wang, S., Wu, D., Yuan, Q., Experimental and simulation study of hydrogen sulfide adsorption on impregnated activated carbon under anaerobic conditions. J. Hazard. Mater. 153 (2008), 1193–1200.
15. [15] Xiao, Y., Wang, S., Wu, D., Yuan, Q., Catalytic oxidation of hydrogen sulfide over unmodified and impregnated activated carbon. Sep. Purif. Technol. 59 (2008), 326–332.
16. [16] Roque-Malherbe, R.M.A., Adsorption and Diffusion in Nanoporous Materials. 2007, CRC Press.
17. [17] Ghaedi, M., Ansari, A., Habibi, M.H., Asghari, A.R., Removal of malachite green from aqueous solution by zinc oxide nanoparticle loaded on activated carbon: kinetics and isotherm study. J. Ind. Eng. Chem. 20 (2014), 17–28.
18. [18] Roosta, M., Ghaedi, M., Daneshfar, A., Sahraei, R., Asghari, A., Optimization of the ultrasonic assisted removal of methylene blue by gold nanoparticles loaded on activated carbon using experimental design methodology. Ultrason. Sonochem. 21 (2014), 242–252.
19. [19] Van Der Merwe, M.M., Bandosz, T.J., A study of ignition of metal impregnated carbons: the influence of oxygen content in the activated carbon matrix. J. Colloid Interf. Sci. 282 (2005), 102–108.
20. [20] Yan, R., Chin, T., Ng, Y.L., Duan, H., Liang, D.T., Tay, J.H., Influence of surface properties on the mechanism of H2S removal by alkaline activated carbons. Environ. Sci. Technol. 38 (2004), 316–323.
21. [21] Meljac, L., Perier-Camby, L., Thomas, G., Creation of active sites by impregnation of carbon fibers: application to the fixation of hydrogen sulfide. J. Colloid Interf. Sci. 274 (2004), 133–141.
22. [22] Chiang, H.-L., Tsai, J.-H., Chang, G.-M., Hsu, Y.-C., Adsorption kinetic characteristics of H2S on activated carbon. Adsorption 8 (2002), 325–340.
23. [23] De Arespacochaga, N., Valderrama, C., Mesa, C., Bouchy, L., Cortina, J.L., Biogas deep clean-up based on adsorption technologies for solid oxide fuel cell applications. Chem. Eng. J. 255 (2014), 593–603.
24. [24] Monteleone, G., De Francesco, M., Galli, S., Marchetti, M., Naticchioni, V., Deep H2S removal from biogas for molten carbonate fuel cell (MCFC) systems. Chem. Eng. J. 173 (2011), 407–414.
25. [25] Bandosz, T.J., On the adsorption/oxidation of hydrogen sulfide on activated carbons at ambient temperatures. J. Colloid Interf. Sci. 246 (2002), 1–20.
26. [26] Feng, W., Kwon, S., Borguet, E., Vidic, R., Adsorption of hydrogen sulfide onto activated carbon fibers: effect of pore structure and surface chemistry. Environ. Sci. Technol. 39 (2005), 9744–9749.
27. [27] Bagreev, A., Rahman, H., Bandosz, T.J., Thermal regeneration of a spent activated carbon previously used as hydrogen sulfide adsorbent. Carbon N. Y. 39 (2001), 1319–1326.
28. [28] Adib, F., Bagreev, A., Bandosz, T.J., Analysis of the relationship between H2S removal capacity and surface properties of unimpregnated activated carbons. Environ. Sci. Technol. 34 (2000), 686–692.
29. [29] Adib, F., Bagreev, A., Bandosz, T.J., Effect of pH and surface chemistry on the mechanism of H2S removal by activated carbons. J. Colloid Interf. Sci. 216 (1999), 360–369.
30. [30] Dubinin, M.M., Fundamentals of the theory of adsorption in micropores of carbon adsorbents: characteristics of their adsorption properties and microporous structures. Carbon N. Y. 27 (1989), 457–467.
31. [31] Bagreev, A., Bashkova, S., Bandosz, T.J., Dual role of water in the process of methyl mercaptan adsorption on activated carbons. Langmuir 18 (2002), 8553–8559.
32. [32] Bashkova, S., Baker, F.S., Wu, X., Armstrong, T.R., Schwartz, V., Activated carbon catalyst for selective oxidation of hydrogen sulphide: on the influence of pore structure, surface characteristics, and catalytically-active nitrogen. Carbon N. Y. 45 (2007), 1354–1363.
33. [33] Figueiredo, J.L., Pereira, M.F.R., Freitas, M.M.A., Orfao, J.J.M., Modification of the surface chemistry of activated carbons. Carbon N. Y. 37 (1999), 1379–1389.
34. [34] Biniak, S., Pakula, M., Szymanski, G.S., Swiatkowski, A., Effect of activated carbon surface oxygen-and/or nitrogen-containing groups on adsorption of copper (II) ions from aqueous solution. Langmuir 15 (1999), 6117–6122.
35. [35] Bagreev, A., Menendez, J.A., Dukhno, I., Tarasenko, Y., Bandosz, T.J., Bituminous coal-based activated carbons modified with nitrogen as adsorbents of hydrogen sulfide. Carbon N. Y. 42 (2004), 469–476.
36. [36] Chiang, H.-L., Tsai, J.-H., Chang, D.-H., Jeng, F.-T., Diffusion of hydrogen sulfide and methyl mercaptan onto microporous alkaline activated carbon. Chemosphere 41 (2000), 1227–1232.
37. [37] Chingombe, P., Saha, B., Wakeman, R.J., Surface modification and characterisation of a coal-based activated carbon. Carbon N. Y. 43 (2005), 3132–3143.
38. 3+ ions and Alizarin red S by activated carbon engrafted with Ag nanoparticles: central composite design and genetic algorithm optimization. RSC Adv. 5 (2015), 59522–59532.
39. [39] Ghaedi, M., Biyareh, M.N., Kokhdan, S.N., Shamsaldini, S., Sahraei, R., Daneshfar, A., et al. Comparison of the efficiency of palladium and silver nanoparticles loaded on activated carbon and zinc oxide nanorods loaded on activated carbon as new adsorbents for removal of Congo red from aqueous solution: kinetic and isotherm study. Mater. Sci. Eng. C 32 (2012), 725–734.
40. [40] Dashamiri, S., Ghaedi, M., Dashtian, K., Rahimi, M.R., Goudarzi, A., Jannesar, R., Ultrasonic enhancement of the simultaneous removal of quaternary toxic organic dyes by CuO nanoparticles loaded on activated carbon: central composite design, kinetic and isotherm study. Ultrason. Sonochem. 31 (2016), 546–557.
41. 3-HKUST-1-MOF: central composite optimization and synergistic effect study. Ultrason. Sonochem. 32 (2016), 387–397.
42. [42] Almeida, C.A.P., Debacher, N.A., Downs, A.J., Cottet, L., Mello, C.A.D., Removal of methylene blue from colored effluents by adsorption on montmorillonite clay. J. Colloid Interf. Sci. 332 (2009), 46–53.
43. [43] Beck, D.D., Siegel, R.W., The dissociative adsorption of hydrogen sulfide over nanophase titanium dioxide. J. Mater. Res. 7 (1992), 2840–2845.
44. [44] Yu, Y., St, D.-W., Astle, J.N., Molecular-beam study of the adsorption and desorption of hydrogen sulfide on Ag {111}. Chem. Phys. Lett. 312 (1999), 455–460.
45. [45] Kuo, J.-K., Huang, P.-H., Huang, T.-H., Luo, J.-Y., Adsorption behaviors of hydrogen sulphide on Au (110) nanoslit array surfaces using molecular dynamics simulations. Mol. Simulat., 1–8, 2016.
46. [46] Huang, P.-H., Molecular dynamics investigation of separation of hydrogen sulfide from acidic gas mixtures inside metal-doped graphite micropores. Phys. Chem. Chem. Phys. 17 (2015), 22686–22698.
47. [47] Yang, Y., Allen, E.R., Biofiltration control of hydrogen sulfide 1. Design and operational parameters. Air Waste 44 (1994), 863–868.
48. [48] Novochinskii, I.I., Song, C., Ma, X., Liu, X., Shore, L., Lampert, J., et al. Low-temperature H2S removal from steam-containing gas mixtures with ZnO for fuel cell application. 1. ZnO particles and extrudates. Energy Fuels 18 (2004), 576–583.
49. [49] Ghaedi, M., Hassanzadeh, A., Kokhdan, S.N., Multiwalled carbon nanotubes as adsorbents for the kinetic and equilibrium study of the removal of alizarin red S and morin. J. Chem. Eng. Data 56 (2011), 2511–2520.
50. [50] Toor, M., Jin, B., Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye. Chem. Eng. J. 187 (2012), 79–88.
51. [51] Rajendran, A., Chen, W., Binary retention time method for rapid determination of competitive Langmuir isotherm parameters. Sep. Purif. Technol. 67 (2009), 344–354.
52. [52] Ho, Y.-S., Isotherms for the sorption of lead onto peat: comparison of linear and non-linear methods. Polish J. Environ. Stud. 15 (2006), 81–86.
53. [53] Jeppu, G.P., Clement, T.P., A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects. J. Contam. Hydrol. 129 (2012), 46–53.
54. [54] Alstrup, I.B., Rostrup-Nielsen, J.R., Røen, S., High temperature hydrogen sulfide chemisorption on nickel catalysts. Appl. Catal. 1 (1981), 303–314.
55. [55] Özcan, A., Öncü, E.M., Özcan, A.S., Kinetics, isotherm and thermodynamic studies of adsorption of Acid Blue 193 from aqueous solutions onto natural sepiolite. Colloids Surf. A Physicochem. Eng. Asp. 277 (2006), 90–97.
56. [56] Weil, K.G., Jaycock, M.J., Parfitt, G.D., Chemistry of interfaces, Ellis Horwood Limited Publishers, Chichester 1981. 279 Seiten, Preis:£ 27, 50. Berich. Bunsengesell. Phys. Chem., 85(1981), 1981, 718.
57. [57] Kelleher, B.P., O'Callaghan, M.N., Leahy, M.J., O'Dwyer, T.F., Leahy, J.J., The use of fly ash from the combustion of poultry litter for the adsorption of chromium (III) from aqueous solution. J. Chem. Technol. Biotechnol. 77 (2002), 1212–1218.