Thin poly(ether-block-amide)/attapulgite composite membranes with improved CO2 permeance and selectivity for CO2/N2 and CO2/CH4

Chemical Engineering Science

Volumn 160, Issue , 2017, Pages 236-244

  Xiang, Long ^a   Pan, Yichang ^a   Jiang, Jinlong ^b   Chen, Ye ^c   Chen, Jing ^b   Zhang, Lixiong ^a   Wang, Chongqing ^a  

^a NANJING TECH UNIVERSITY   (China)

^b HUAIYIN INSTITUTE OF TECHNOLOGY   (China)

^c DONGHUA UNIVERSITY   (China)

Author keywords

Attapulgite; Carbon dioxide separation; Gas separation; Mixed matrix membrane

Indexed keywords

AIR PURIFICATION; AMIDES; CARBON; CARBON DIOXIDE; COMPOSITE MEMBRANES; ETHERS; GAS PERMEABILITY; HYBRID MATERIALS; MEMBRANES; PERMEATION; SEPARATION;

ATTAPULGITES; CARBON DIOXIDE SEPARATION; FREE STANDING MEMBRANES; GAS SEPARATIONS; GENERALIZED MAXWELL MODEL; MIXED MATRIX MEMBRANES; POLY(ETHER BLOCK AMIDE); POLYACRYLONITRILE (PAN);

GAS PERMEABLE MEMBRANES;

EID: 84998610924     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ces.2016.11.037     Document Type: Article

References (46)

1. 2 Capture. Angew. Chem. Int. Ed. Engl. 54 (2015), 1548–15487.
2. Bondar, V.I., Freeman, B.D., Pinnau, I., Gas transport properties of Poly(ether-b-amide) segmented block copolymers. J. Polym. Sci. Polym. Phys. 38 (2000), 2051–2062.
3. Buonomenna, M.G., Yave, W., Golemme, G., Some approaches for high performance polymer based membranes for gas separation: block copolymers. Carbon molecular sieves and mixed matrix membranes. RSC Adv. 2 (2012), 10745–10773.
4. 2 separation: performance with mixed gases. Sep. Purif. Technol. 62 (2008), 110–117.
5. Chung, T.-S., Jiang, L.Y., Li, Y., Kulprathipanja, S., Mixed matrix membranes (MMMs) comprising organic polymers with dispersed inorganic fillers for gas separation. Prog. Polym. Sci. 32 (2007), 483–507.
6. Dong, G., Li, H., Chen, V., Challenges and opportunities for mixed-matrix membranes for gas separation. J. Mater. Chem. A 1 (2013), 4610–4630.
7. Freeman, B.D., Basis of permeability/selectivity tradeoff relations in polymeric gas separation membranes. Macromolecules 32 (1999), 375–380.
8. Kim, J.H., Lee, Y.M., Gas permeation properties of poly(amide-6-b-ethyleneoxide)-silica hybrid membranes. J. Membr. Sci. 193 (2001), 209–225.
9. Kim, J.H., Ha, S.Y., Lee, Y.M., Gas permeation of poly(amide-6-b-ethylene oxide) copolymer. J. Membr. Sci. 190 (2001), 179–193.
10. Kim, W.G., Nair, S., Membranes from nanoporous 1D and 2D materials: a review of opportunities, developments, and challenges. Chem. Eng. Sci. 104 (2013), 908–924.
11. Kim, W.G., Lee, J.S., Bucknall, D.G., Koros, W.J., Nair, S., Nanoporous layered silicate AMH-3/cellulose acetate nanocomposite membranes for gas separations. J. Membr. Sci. 441 (2013), 129–136.
12. 2 separation. ACS Appl. Mater. Inter. 7 (2015), 15481–15493.
13. Li, T., Pan, Y., Peinemann, K.-V., Lai, Z., Carbon dioxide selective mixed matrix composite membrane containing ZIF-7 nano-fillers. J. Membr. Sci. 425–426 (2013), 235–242.
14. 2‑philic groups and improved adhesion at the interface. ACS Appl. Mater. Inter. 6 (2014), 6654–6663.
15. 2 capture by humidified polymer electrolyte membranes with tunable water state. Energ. Environ. Sci. 7 (2014), 1489–1499.
16. Lin, H.Q., Van Wagner, E., Freeman, B.D., Toy, L.G., Gupta, R.P., Plasticization-enhanced hydrogen purification using polymeric membranes. Science 311 (2006), 639–642.
17. Merkel, T.C., Lin, H., Wei, X., Baker, R., Power plant post-combustion carbon dioxide capture: an opportunity for membranes. J. Membr. Sci. 359 (2010), 126–139.
18. Moore, T.T., Koros, W.J., Gas sorption in polymers, molecular sieves, and mixed matrix membranes. J. Appl. Polym. Sci. 104 (2007), 4053–4059.
19. Moore, T.T., Mahajan, R., Vu, D.Q., Koros, W.J., Hybrid membrane materials comprising organic polymers with rigid dispersed phases. AIChE J. 50 (2004), 311–321.
20. 2 capture. J. Membr. Sci. 459 (2014), 244–255.
21. Pandey, P., Chauhan, R.S., Membranes for gas separation. Prog. Polym. Sci. 26 (2001), 853–893.
22. Peter, J., Peinemann, K.-V., Multilayer composite membranes for gas separation based on crosslinked PTMSP gutter layer and partially crosslinked Matrimid® 5218 selective layer. J. Membr. Sci. 340 (2009), 62–72.
23. 2 capture. J. Membr. Sci. 469 (2014), 344–354.
24. 2 separation using mixed matrix membranes (MMMs): an overview on current status and future directions. Prog. Polym. Sci. 39 (2014), 817–861.
25. Robeson, L.M., Correlation of separation factor versus permeability for polymeric membranes. J. Membr. Sci. 62 (1991), 165–185.
26. Robeson, L.M., The upper bound revisited. J. Membr. Sci. 320 (2008), 390–400.
27. 3 on ordered mesoporous carbon. J. Colloid Inter. Sci. 345 (2010), 402–409.
28. 2 on MOF-5, MOF-177, and Zeolite 5A. Environ. Sci. Technol. 44 (2010), 1820–1826.
29. 2 capture?. Chem. Soc. Rev. 44 (2015), 2421–2454.
30. 2 capture. Angew. Chem. Int. Ed. Engl. 54 (2015), 578–582.
31. 2 separation. J. Membr. Sci. 513 (2016), 155–165.
32. Sullivan, D.M., Bruening, M.L., Ultrathin, gas-selective polyimide membranes prepared from multilayer polyelectrolyte films. Chem. Mater. 15 (2003), 281–287.
33. Surya Murali, R., Ismail, A.F., Rahman, M.A., Sridhar, S., Mixed matrix membranes of Pebax-1657 loaded with 4A zeolite for gaseous separations. Sep. Purif. Technol. 129 (2014), 1–8.
34. Toy, L.G., Freeman, B.D., Spontak, R.J., Gas permeability and phase morphology of Poly(1-(trimethylsilyl)-1-propyne)/Poly(1-phenyl-1-propyne) blends. Macromolecules 30 (1997), 4766–4769.
35. Vinh-Thang, H., Kaliaguine, S., Predictive models for mixed-matrix membrane performance: a review. Chem. Rev. 113 (2013), 4980–5028.
36. Visser, T., Koops, G.H., Wessling, M., On the subtle balance between competitive sorption and plasticization effects in asymmetric hollow fiber gas separation membranes. J. Membr. Sci. 252 (2005), 265–277.
37. 2 separation performance of PEO-PA block copolymer membranes. Ind. Eng. Chem. Res. 54 (2015), 7273–7283.
38. Wijmans, J.G., Baker, R.W., The solution-diffusion model: a review. J. Membr. Sci. 107 (1995), 1–21.
39. Wu, H., Li, X., Li, Y., Wang, S., Guo, R., Jiang, Z., Wu, C., Xin, Q., Lu, X., Facilitated transport mixed matrix membranes incorporated with amine functionalized MCM-41 for enhanced gas separation properties. J. Membr. Sci. 465 (2014), 78–90.
40. 2 separation. J. Membr. Sci. 500 (2016), 66–75.
41. 2 gases through polymeric membranes. J. Appl. Polym. Sci. 78 (2000), 179–189.
42. Zhao, D., Ren, J., Li, H., Li, X., Deng, M., Gas separation properties of poly(amide-6-b-ethylene oxide)/amino modified multi-walled carbon nanotubes mixed matrix membranes. J. Membr. Sci. 467 (2014), 41–47.
43. 2 separation. J. Membr. Sci. 489 (2015), 1–10.
44. Zornoza, B., Tellez, C., Coronas, J., Gascon, J., Kapteijn, F., Metal organic framework based mixed matrix membranes: an increasingly important field of research with a large application potential. Micro. Mesoporous Mat. 166 (2013), 67–78.
45. Zornoza, B., Téllez, C., Coronas, J., Esekhile, O., Koros, W.J., Mixed matrix membranes based on 6FDA polyimide with silica and zeolite microsphere dispersed phases. AIChE J. 61 (2015), 4481–4490.
46. 4 at elevated pressures. Chem. Commun. 47 (2011), 9522–9524.