Improving the properties of wood-plastic composite through addition of hardwood pyrolysis liquid

Journal of Thermoplastic Composite Materials

Volumn 29, Issue 11, 2016, Pages 1587-1598

  Väisänen, Taneli ^a   Heikkinen, Jorma ^a   Tomppo, Laura ^a   Lappalainen, Reijo ^a  

^a UNIVERSITY OF EASTERN FINLAND   (Finland)

Author keywords

mechanical properties; pyrolysis; volatile organic compound (VOC); water absorption; Wood plastic composite

Indexed keywords

ADDITIVES; COUPLING AGENTS; FORESTRY; MASS SPECTROMETRY; MECHANICAL PROPERTIES; MONOTERPENES; ORGANIC COMPOUNDS; POLYPROPYLENES; PROTON TRANSFER; PYROLYSIS; REACTION RATES; VOLATILE ORGANIC COMPOUNDS; WATER ABSORPTION; WOOD PRODUCTS;

MASS SPECTROMETRIC ANALYSIS; POLYPROPYLENE MATRICES; PROTON TRANSFER REACTIONS; PYROLYSIS LIQUIDS; TENSILE AND FLEXURAL PROPERTIES; VOLATILE ORGANIC COMPOUND (VOC); WOOD PLASTIC COMPOSITE; WOOD-PLASTIC COMPOSITES;

HARDWOODS;

COMPOSITES; HARDWOODS; POLYMER WOOD COMBINATIONS; POLYPROPYLENE; PYROLYSIS; VOC; WATER ABSORPTION;

EID: 84994060898     PISSN: 08927057     EISSN: 15307980     Source Type: Journal    
DOI: 10.1177/0892705716632862     Document Type: Article

References (41)

1. Clemons C,. Raw materials for wood-polymer composites. In: Oksman Niska K, Sain M, (eds) Wood-Polymer Composites. Cambridge: CRC Press, 2008, pp. 1-22.
2. Stokke DD, Wu Q, Han G,. Introduction to wood and natural fiber composites. West Sussex: John Wiley & Sons, 2014.
3. Kim J, Pal K,. Overview of wood-plastic composites and uses. In: Kim J, Pal K, (eds) Recent Advances in the Processing of Wood-Plastic Composites. Berlin: Springer, 2010, pp. 1-22.
4. Kuo P, Wang S, Chen J, et al. Effects of material compositions on the mechanical properties of wood-plastic composites manufactured by injection molding. Mater Des 2009; 30 (9): 3489-3496.
5. Butylina S, Martikka O, Kärki T,. Properties of wood fibre-polypropylene composites: effect of wood fibre source. Appl Compos Mater 2011; 18 (2): 101-111.
6. Yuan Q, Wu D, Gotama J, et al. Wood fiber reinforced polyethylene and polypropylene composites with high modulus and impact strength. J Thermoplast Compos Mater 2008; 21 (3): 195-208.
7. Gao H, Song Y, Wang Q, et al. Rheological and mechanical properties of wood fiber-PP/PE blend composites. J Forest Res 2008; 19 (4): 315-318.
8. La Mantia FP, Morreale M, Mohd Ishak ZA,. Processing and mechanical properties of organic filler-polypropylene composites. J Appl Polym Sci 2005; 96 (5): 1906-1913.
9. Adhikari R, Bhandari NL, Le HH, et al. Thermal, mechanical and morphological behavior of poly(propylene)/wood flour composites. Macromol Symp 2012; 315 (1): 24-29.
10. Ayrilmis N, Jarusombuti S, Fueangvivat V, et al. Effect of thermal-treatment of wood fibres on properties of flat-pressed wood plastic composites. Polym Degrad Stabil 2011; 96 (5): 818-822.
11. Klyosov A,. Composition of wood-plastic composite deck boards: thermoplastics. In: Klyosov A, (ed) Wood-plastic composites. Hoboken: John Wiley & Sons, 2007, pp. 50-74.
12. Huuhilo T, Martikka O, Butylina S, et al. Mineral fillers for wood-plastic composites. Wood Mater Sci Eng 2010; 5 (1): 34-40.
13. Markarian J,. Wood-plastic composites: current trends in materials and processing. Plast Addit Compound 2005; 7 (5): 20-26.
14. Kantarelis E, Yang W, Blasiak W,. Biomass pyrolysis for energy and fuels production. In: Dahlquist E, (ed) Technologies for converting biomass to useful energy: combustion, gasification, pyrolysis, torrefaction and fermentation. Boca Raton: CRC Press, 2013, pp. 245-277.
15. Nachenius R, Ronsse F, Venderbosch R, et al. Biomass pyrolysis. In: Murzin DY, (ed) Chemical engineering for renewables conversion. Burlington: Academic Press, 2013, pp. 75-139.
16. Bhaskar T, Bhavya B, Singh R, et al. Thermochemical conversion of biomass to biofuels. In: Pandey A, (ed) Biofuels: alternative feedstocks and conversion processes. London: Academic Press, 2011, pp. 51-77.
17. Lanteigne J, Laviolette J, Chaouki J,. Biomass pre-treatments for biorefinery applications: pyrolysis. In: Fang Z, (ed) Pretreatment Techniques for Biofuels and Biorefineries. Berlin, Germany: Springer, 2013, pp. 229-260.
18. Khelfa A, Bensakhria A, Weber JV,. Investigations into the pyrolytic behaviour of birch wood and its main components: Primary degradation mechanisms, additivity and metallic salt effects. J Anal Appl Pyrolysis 2013; 101: 111-121.
19. Park J, Lee Y, Ryu C, et al. Slow pyrolysis of rice straw: Analysis of products properties, carbon and energy yields. Bioresour Technol 2014; 155: 63-70.
20. Mohan D, Pittman CU, Steele PH,. Pyrolysis of wood/biomass for bio-oil: a critical review. Energy Fuel 2006; 20 (3): 848-889.
21. Fagernäs L, Kuoppala E, Tiilikkala K, et al. Chemical composition of birch wood slow pyrolysis products. Energ Fuel 2012; 26 (2): 1275-1283.
22. Balat M, Balat M, Klrtay E, et al. Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: pyrolysis systems. Energ Convers Manage 2009; 50 (12): 3147-3157.
23. Pyl SP, Dijkmans T, Antonykutty JM, et al. Wood-derived olefins by steam cracking of hydrodeoxygenated tall oils. Bioresour Technol 2012; 126: 48-55.
24. Fagernäs L, Kuoppala E, Simell P,. Polycyclic aromatic hydrocarbons in birch wood slow pyrolysis products. Energ Fuel 2012; 26 (11): 6960-6970.
25. Zhu X, Lu Q,. Production of chemicals from selective fast pyrolysis of biomass. In: Momba M, Ndombo B, (eds) Biomass. Rijek: Sciyo, 2010, pp. 147-164.
26. Bridgwater A,. Thermal Biomass Conversion and Utilization: Biomass Information System. Luxembourg: Office for Official Publications of the European Communities, 1996.
27. Tiilikkala K, Fagernäs L, Tiilikkala J,. History and use of wood pyrolysis liquids as biocide and plant protection product. Open Agr J 2010; 4 (Special Issue# 002): 111-118.
28. Lindqvist I, Lindqvist B, Tiilikkala K,. Birch tar oil is an effective mollusc repellent: field and laboratory experiments using Arianta arbustorum (Gastropoda: Helicidae) and Arion lusitanicus (Gastropoda: Arionidae). Agr Food Sci 2008; 19 (1): 1-12.
29. Das O, Sarmah AK, Bhattacharyya D,. A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites. Waste Manage 2015; 38: 132-140.
30. Li X, Lei B, Lin Z, et al. The utilization of bamboo charcoal enhances wood plastic composites with excellent mechanical and thermal properties. Mater Des 2014; 53: 419-424.
31. Väisänen T, Tomppo L, Selenius M, et al. Effects of slow pyrolysis derived birch distillate on the properties of wood-plastic composites. Eur J Wood Prod 2016; 74 (1): 131-133.
32. Väisänen T, Laitinen K, Yli-Pirilä P, et al. A rapid technique for monitoring volatile organic compound emissions from wood-plastic composites. Indoor and Built Environment. DOI: 10.1177/1420326X16669976.
33. Sobczak L, Steiner M, Schausberger A, et al. PP-based WPCs-Influence of the molar mass of matrix and coupling agent. Polym Compos 2013; 34 (3): 343-353.
34. Balasuriya PW, Ye L, Mai Y-W, et al. Mechanical properties of wood flake-polyethylene composites. II. Interface modification. J Appl Polym Sci 2002; 83 (12): 2505-2521.
35. Najafi SK, Mostafazadeh-Marznaki M, Chaharmahali M,. Effect of thermo-mechanical degradation of polypropylene on hygroscopic characteristics of wood flour-polypropylene composites. J Polym Environ 2010; 18 (4): 720-726.
36. Cui Y, Wang X, Xu Q, et al. Research on moisture absorption behavior of recycled polypropylene matrix wood plastic composites. J Thermoplast Compos Mater 2011; 24 (1): 65-82.
37. Greenberg J, Friedli H, Guenther A, et al. Volatile organic emissions from the distillation and pyrolysis of vegetation. Atmos Chem Phys 2006; 6 (1): 81-91.
38. Nerio LS, Olivero-Verbel J, Stashenko E,. Repellent activity of essential oils: a review. Bioresour Technol 2010; 101 (1): 372-378.
39. Silva ACR, Lopes PM, Azevedo MMB, et al. Biological activities of α-pinene and β-pinene enantiomers. Molecules 2012; 17 (6): 6305-6316.
40. Rinne J, Taipale R, Markkanen T, et al. Hydrocarbon fluxes above a Scots pine forest canopy: measurements and modeling. Atmos Chem Phys 2007; 7 (12): 3361-3372.
41. Dorfner R, Ferge T, Kettrup A, et al. Real-time monitoring of 4-vinylguaiacol, guaiacol, and phenol during coffee roasting by resonant laser ionization time-of-flight mass spectrometry. J Agric Food Chem 2003; 51 (19): 5768-5773.