Polyimides for gas separation

Polyimides: Fundamentals and Applications

Volumn , Issue , 2018, Pages 697-742

  Langsam, Michael ^a  

^a AIR PRODUCTS AND CHEMICALS INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GASES; MEMBRANE TECHNOLOGY; MICROFILTRATION;

COMMERCIAL REALITY; GAS SEPARATION PROCESS; GAS SEPARATIONS; LIQUID SEPARATION; MEMBRANE FABRICATION; MEMBRANE-BASED; PERSONAL PERSPECTIVE; TECHNICAL ASPECTS;

GAS PERMEABLE MEMBRANES;

EID: 84991655541     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203742945     Document Type: Chapter

References (143)

1. A. Fick, Pogg. Ann. 94: 59 (1855).
2. T. Graham, Phil. Mag. 32: 402 (1866).
3. H. K. Lonsdale, J. Memb. Sci. 10: 81 (1982).
4. W. J. Koros and G. K. Fleming, J.Memb. Sci. 83: 1 (1993).
5. Membrane and Separation Technology News, February 1993, p. 12.
6. L. E. Nielsen, Mechanical Properties of Polymers, Reinhold Publishing Co., New York, 1962.
7. J. J. Aklonis and W. J. McKnight, Introduction to Polymer Viscoelasticity, Second Edition, John Wiley and Sons, New York, 1983.
8. S. Von Kroblewski, Wiedemonns Ann. Physik 8: 29 (1879).
9. H. A. Daynes, Proc. Roy. Soc. (London) A97: 286 (1920).
10. S. A. Stern, in Membrane Separation Processes (P. Meares, ed.), Elsevier Scientific Publishing Co., Amsterdam, 1976, pp. 295-326.
11. S. M. Jordan and W. J. Koros, J. Polym. Sci. Polym. Phys. Ed. 28: 795 (1990).
12. F. W. Billmeyer, Textbook of Polymer Science, Interscience, New York, 1962, pp. 180.
13. P. Meares, J. Am. Chem. Soc. 76: 3415 (1954).
14. P. Meares, Trans. Faraday Soc. 53: 101 (1957).
15. R. M. Barrer, J. A. Barrier, and J. Slater, J. Polym. Sci. 27: 177 (1958).
16. A. S. Michaels, W. R. Vieth, and W. R. Barrie, J. Appl. Phys. 34: 113 (1963).
17. W. R. Vieth and K. J. Sladek, J. Colloid Sci. 20: 1014 (1965).
18. D. R. Paul, J. Polym. Sci. A-2, 7: 1811 (1969).
19. J. H. Petropoulos, J. Polym. Sci. A-2, 8: 1979 (1970).
20. D. R. Paul and D. R. Kemp, J. Polym. Sci. Symp. 41: 79 (1973).
21. D. R. Kemp and D. R. Paul, J. Polym. Sci. Polym. Phys. Ed. 12: 485 (1974).
22. D. R. Paul and W. J. Koros, J. Polym. Sci. Polym. Phys. Ed. 14: 675 (1976).
23. W. J. Koros, D. R. Paul, and A. A. Rocha, J. Polym. Sci. Polym. Phys. Ed. 14: 687 (1976).
24. W. J. Koros, A. H. Chan, and D. R. Paul, J. Memb. Sci. 2: 165 (1977).
25. W. J. Koros and D. R. Paul, J. Polym. Sci. Polym. Phys. Ed. 16: 1947 (1978).
26. W. J. Koros and D. R. Paul, J. Polym. Sci. Polym. Phys. Ed. 16: 2717 (1978).
27. W. J. Koros, J. Polym. Sci. Polym. Phys. Ed. 18: 981 (1980).
28. C. R. Antonson, R. U. Gardner, C. F. King, and K. Y. Ko, Ind. Eng. Chem. Proc. Des. Dev. 16: 465 (1977).
29. W. J. Koros, R. T. Chem, V. Stannett, and H. B. Hopfenberg, J. Polym. Sci. Polym. Phys. Ed. 19: 1513 (1981).
30. D. G. Pye, H. H. Hoehn, and M. Panar, J. Appl. Polym. Sci. 20: 1921 (1976).
31. D. Masi, D. R. Paul, and J. W. Barlow, J. Polym. Sci. Polym. Phys. Ed. 20: 15 (1982).
32. A. J. Erb and D. R. Paul, J. Memb. Sci. 8: 11 (1981).
33. K. Toi, G. Morel, and D. R. Paul, J. Appl. Polym. Sci. 27: 2997 (1982).
34. S. A. Stern and H. L. Frisch, Ann. Rev. Mater. Sci. 11: 523 (1981).
35. D. Raucher and M. D. Sefcik, Sorption and Transport in Glassy Polymer Matrix, presented at Industrial Gas Separations, 18th State of the Art Symposium, ACS Symposium Series #223 Washington, DC, June 1982, pp. 111-124.
36. M. D. Sefcik, J. Schaefer, F. L.May, D. Raucher, and S. M. Dub, J. Polym. Sci. Polym. Phys. Ed. 21: 1041 (1983).
37. M. D. Sefcik and J. Schaefer, J. Polym. Sci. Polym. Phys. Ed. 21: 1055 (1983).
38. L. M. Robeson, J. Memb. Sci. 62: 165 (1991).
39. R. F. Boehme and G. S. Cargill III, Polyimides: Synthesis, Characterization and Applications (K. L. Mittal, ed.), Plenum Press, New York, 1984, pp. 461-476.
40. F. W. Billmeyer, Textbook of Polymer Science, Interscience, New York, 1962, pp. 198-204.
41. A. Bondi, Physical Properties of Molecular Crystals, Liquids and Glasses, John Wiley and Sons, New York, 1968.
42. L. Pilato, L. Litz, B. Hargitay, R. Osborne, A. Farnham, J. Kawakami, P. Fritze, and J. McGrath, Polymer Preprints, (American Chemical Society Div. Polym. Chem.) 16: 42 (1975).
43. A. C. Puleo, N. Muruganandam, and D. R. Paul, J. Polym. Sci. Polym. Phys. Ed. 27: 2385 (1989).
44. L. M. Robeson, A. Noshay, M. Matzner, and C. N. Merriam, Angew. Makromol. Chem. 29/30: 47 (1973).
45. M. Langsam and W. F. Burgoyne, J. Polym. Sci. Polym. Chem. Ed. 31: 909 (1993).
46. W. J. Koros, M. R. Coleman, and D. R. B. Walker, Annu. Rev. Mater. Sci. 22: 47 (1992).
47. M. Salame, Polym. Eng. Sci. 26: 1543 (1986).
48. D. W. Van Krevelen, Properties of Polymers, Third Edition, Elsevier, Amsterdam, 1990, p. 556.
49. K. Matsumoto, P. Xu, and T. Nishikimi, J. Memb. Sci. 81: 15 (1993).
50. K. Matsumoto and P. Xu, J. Memb. Sci. 81: 23 (1993).
51. Yu. P. Yampolsky and S. M. Shishatsky, Doklady Akademii Nauk SSSR Special Issue 318(3): 653 (1991), Engl. Trans.
52. W. W. Brandt, J. Phys. Chem. 63: 1080 (1959).
53. W. W. Brandt and G. A. Anysas, J. Appl. Polym. Sci. 7: 1919 (1963).
54. R. J. Pace and A. Datyner, J. Polym. Sci. Polym. Phys. Ed. 17: 437, (1979).
55. H. Fujita, Fortschr. Hochpolym. Forsch., 3, 1 (1961).
56. J. S. Vrentas and J. L. Duda, J. Polym. Sci. Polym. Phys. Ed. 15: 403, 407 (1977).
57. J. S. Vrentas and J. L. Duda, J. Appl. Polym. Sci. 21, 1715 (1977).
58. N. Muruganandam, W. J. Koros, and D. R. Paul, J. Polym. Sci. Polym. Phys. Ed. 25: 1999 (1987).
59. J. H. Petropoulos, J. Memb. Sci. 53: 229 (1990).
60. R. H. Boyd and K. Pant, in Computer Simulation of Polymers (R. J. Roe, ed.), Prentice Hall, Engelwood Cliffs, NJ, 1991, p. 94.
61. S. Trohalaki, A. Kloczowski, J. E. Mark, D. Rigby, and R. J. Roe, in Computer Simulation of Polymers (R. J. Roe, ed.), Prentice Hall, Engelwood Cliffs, NJ, 1991, p. 220.
62. E. Smit, M. H. V. Mulder, C. A. Smolders, J. van Eerden, and D. Feil, J. Memb. Sci. 73: 247 (1992).
63. S. A. Stem, in Industrial Processing with Membranes, (R. E. Lacey and S. Loeb, eds.), John Wiley and Sons, New York, 1972, p. 279.
64. R. E. Kesting, in Synthetic Polymeric Membranes-A Structural Prospective, Second Edition, John Wiley and Sons, New York, 1985, p. 10.
65. R. E. Kesting, in Material Science of Synthetic Membranes D. R. Lloyd, ed., ACS Symposium Series, No. 269, 1985, pp. 131-164.
66. H. Strathemanel, in Material Science of Synthetic Membranes (D. R. Lloyd, ed.), ACS Symposium Series, No. 269, 1985, pp. 165-196.
67. H. Finker, in Material Science of Synthetic Membranes (D. R. Lloyd, ed.) ACS Symposium Series, No. 269, 1985, pp. 245-272.
68. K. Kamide, H. Iijima, and S. Matsuda, Polym. J. 25: 1113 (1993).
69. J. Cadotte, U.S. Pat. 4,277,344 to Northstar Research (1984).
70. S. Loeb and S. Sourirajan, ACS Adv. Chem. Ser., 38: 117 (1962).
71. S. Loeb, in Synthetic Membranes, Volume 1 (A. F. Turbak, ed.), ACS Symposium Series, No. 153 (1980), p. 5.
72. J. M. S. Henis and M. K. Tripodi, U.S. Pat. 4,230,433 to Monsanto (1980).
73. J. M. S. Henis and M. K. Tripodi, J. Memb. Sci. 8: 233 (1981).
74. B. Kelvin, Office of Salinic Water Research and Development Report #17. U.S. Gov. Printing Office, Washington, D.C, August, 1964.
75. H. Strathmann, P. Scheible, and R. W. Baker, J. Appl. Polym. Sci. 15: 811 (1971).
76. H. Strathmann, K. Kock, P. Amar, and R. W. Baker, Desalination 16: 179 (1975).
77. H. Strathmann and K. Kock, Desalination 21: 241 (1977).
78. R. Zsigismondy and W. Bachman, Z. Anorg Allg. Chem. 103: 119 (1918).
79. C. Friedrich, A. Draincourt, C. Noel, and L. Monnerie, Desalination 36: 39 (1981).
80. E. S. Sanders, Jr., J. A. Jensvold, D. O. Clark, F. L. Coan, H. N. Beck, W. E. Mickols, P. K. Kim, and W. Admassu, U.S. Patent 4,955,993 to Dow Chemical (1990).
81. S. Doi and K. Hamanaka, Desalination 80: 167 (1991).
82. R. E. Kesting, A. K. Fritzsche, M. K. Murphy, A. C. Handermann, C. A. Cruse, and R. F. Malon, U.S. Patent 4,871,494 to Permea (1989).
83. R. E. Kesting, A. K. Fritzsche, M. K. Murphy, A. C. Handerman, C. A. Cruse, and R. F. Malon, U.S. Patent 4,880,441 to Permea (1989).
84. R. F. Kesting, A. K. Fritzsche, M. K. Murphy, C. A. Cruse, A. C. Handermann, R. F. Malon, and M. D. Moore, J. Appl. Polym. Sci. 40: 1557 (1990).
85. R. E. Kesting, A. K. Fritzsche, C. A. Cruse, and M. D. Moore, J. Appl. Polym. Sci. 40: 1575 (1990).
86. R. E. Kesting, J. Appl. Polym. Sci. 41: 2739 (1990).
87. T.-S. Chung, E. R. Kafchinski, and P. Foley, J. Memb. Sci. 75: 181 (1992).
88. I. Pinnau and W. J. Koros, J. Appl. Polym. Sci. 46: 1195 (1992).
89. S. Perez, E. Merlen, E. Robert, J. P. Cohen Addad, and A. Viallat, J. Appl. Polym. Sci. 47: 1631 (1993).
90. K. Haraya, K. Obata, N. Itoh, Y. Shindo, T. Hakuta, and H. Yoshitome, J. Memb. Sci. 41: 23 (1989).
91. C. R. Gochanour, U. S. Patent 5,160,353A to DuPont (1992).
92. I. Cabasso and K. A. Lundy, U.S. Patent 4,602,922 assigned to Research Foundation of State University of New York (1986).
93. D. A. Lewis, J. D. Summers, T. C. Ward, and J. E. McGrath, J. Polym. Sci. Polym. Chem. Ed. 30: 1647 (1992).
94. H. H. Hoehn, U.S. Patent 3,822,202 assigned to DuPont (1974).
95. J. J. Chiou, U.S. Patent 5,286,280 assigned to Hoechst Celanese (1994).
96. S. Yamada and K. Taguchi, Kobunshi Ronbunshu 40: 35 (1983).
97. R. A. Hayes, U.S. Patent 4,717,393 to DuPont (1988).
98. C. L. Bennett and R. E. Richards, British Patent 2,244,997A to British Petroleum Co. (1991).
99. I. K. Meier and M. Langsam, J. Polym. Sci. Polym. Chem. Ed. 31: 83 (1993).
100. I. K. Meier, M. Langsam, and H. C. Klotz, J. Memb. Sci., 94: 195 (1994).
101. T.-C. J. Hsu and Z.-L. Liu, J. Appl. Polym. Sci. 46: 1821 (1992).
102. C. A. Pryde, J. Polym. Sci. Polym. Chem. Ed. 31: 1045 (1993).
103. Y. J. Kim, T. E. Glass, G. D. Lyle, and J. E. McGrath, Macromolecules 26: 1344 (1993).
104. M. Moe, W. J. Koros, H. H. Hoehn, and G. R. Husk, J. Appl. Polym. Sci. 36: 1833 (1988).
105. D. W. van Krevelen, Properties of Polymers, Third Edition, Elsevier, Amsterdam, 1990 p. 553.
106. R. M. Felder and G. S. Huvard, in Methods of Experimental Physics, Volume 16, Polymers, Part C, Physical Properties (R. A. Fava, ed.), Academic Press, 1980.
107. J. D. Bornes, SPE Antec Preprints, 1982, p. 19.
108. K. Toi, T. Ito, T. Shirakawa, H. Ichimura, and I. Ikemoto, J. Appl. Polym. Sci. 29: 2413 (1984).
109. K-M. Chen, T-H. Wang, J-S. King, and A. Hung, J. Appl. Polym. Sci. 48: 291 (1993).
110. K. Matsumoto and P. Xu, J. Appl. Polym. Sci. 47: 1961 (1993).
111. H. A. Vaughn, J. Polym. Sci. B7: 569 (1969).
112. T. Takekoshi, Adv. Polym. Sci. 94: 2 (1990).
113. T. Takekoshi and J. E. Kochanowski, U.S. Patents 3,803,085 (1974); 3,850,885 (1974); 3,991,004 (1976); assigned to General Electric Company.
114. Y. Oishi, M. A. Kakimoto, and Y. Imai, J. Polym. Sci. Polym. Chem. Ed. 29: 1925 (1991).
115. H. Ulrich, Introduction to Industrial Polymers, Hanser Publishers, 1981, p. 116.
116. H.-G. Elias and F. Vohwinkel, New Commercial Polymers 2, Gordon and Breach Science Publishers, New York, 1986, p. 329.
117. H. C. W. M. Buys, A. van Elven, A. E. Jansen, and A. H. A. Tinnemans, J. Appl. Polym. Sci. 41: 1261 (1990).
118. S. Yamada and K. Taguchi, Kobunshi Ronbunshu 40: 35 (1983).
119. R. A. Hayes, U.S. Patent 4,717,394, to DuPont (1988).
120. W. F. Burgoyne, M. Langsam, M. E. Ford, and J. P. Casey, U.S. Patent 4,931,182, to Air Products and Chemicals (1990).
121. C. L. Bennett and R. E. Richards, GB Pat. 2,244,997A, to British Petroleum (1991).
122. K. Tanaka, H. Kita, M. Okano, and K. Okamoto Polymer 33: 587 (1992).
123. K. C. O’Brien and W. J. Koros, J. Memb. Sci. 35: 217 (1988).
124. S. A. Stern, Y. Mi, H. Yamamoto, and A. K. St. Clair, J. Polym. Sci. Polym. Phys. Ed. 27: 1887 (1989).
125. G. F. Sykes and A. K. St. Clair, J. Appl. Polym. Sci. 32: 3725 (1986).
126. Y. Nagase, S. Mori, M. Egawa, and K. Matsui, Markomol. Chem. 191: 2413 (1990).
127. K. Tanaka, H. Kita, K. Okamoto, A. Nakamura, and Y. Kusuki, J. Memb. Sci. 47: 203 (1989).
128. K. Okamoto, K. Tanaka, H. Kita, M. Isida, M. Kakimoto, and Y. Imai, Polym. J. 24: 451 (1992).
129. K. Tanaka, H. Kita, K. Okamoto, A. Nakamura, and Y. Kusuki, Polym. J. 22: 381 (1990).
130. K. Tanaka, M. Okano, H. Toshino, H. Kita, and K. Okamoto, J. Polym. Sci. Polym. Phys. Ed. 30: 907 (1992).
131. O. M. Ekiner and R. A. Hayes, U.S. Pat. 5,015,270, to DuPont (1991).
132. D. R. B. Walker and W. J. Koros, J. Memb. Sci. 55: 99 (1991).
133. T.-H. Kim, W. J. Koros, and G. R. Husk, J. Memb. Sci. 46: 43 (1989).
134. W. J. Koros and D. R. B. Walker, Polym. Jour. 23: 481 (1991).
135. R. A. Hayes, European Pat. Appl. 0 488 341 A3, to DuPont and Air Liquide (1992).
136. R. E. Richards and N. J. Steward, GB Pat 2,229,180A, to British Petroleum (1990).
137. S. A. Stern, R. Vaidyanathan, and J. R. Pratt, J. Memb. Sci. 49: 1 (1990).
138. G. C. Eastman, J. Paprontny, P. C. B. Page, and R. E. Richards, Eur. Pat. Appl. 413,415 Al, to British Petroleum (1990).
139. T. A. Barbari, W. J. Koros, and D. R. Paul, J. Memb. Sci. 42: 69 (1989).
140. Y. Oishi, M.-A. Kakimoto, and Y. Imai, J. Polym Sci. Poly. Chem. Ed. 29: 1925 (1991).
141. R. A. Hayes, U.S. Patent 4,705,540, to DuPont (1987).
142. R. A. Hayes, U.S. Patent 4,838,900, to DuPont (1989).
143. R. A. Hayes, U.S. Patent 4,717,393, to DuPont (1988).