An experimental investigation on the mechanical behavior between cemented granules

Geotechnical Testing Journal

Volumn 35, Issue 5, 2012, Pages

  Jiang, M J ^a   Sun, Y G ^a   Xiao, Y ^a  

^a Tongji University   (China)

Author keywords

Aluminum rods; Cemented granules; Cemented sands; Distinct element method; Mechanical behavior

Indexed keywords

ALUMINUM; CEMENTS; DROPS;

ALUMINUM RODS; CEMENTED GRANULES; CEMENTED SANDS; DISTINCT ELEMENT METHODS; MECHANICAL BEHAVIOR;

GRANULATION;

EID: 84989227567     PISSN: 01496115     EISSN: None     Source Type: Journal    
DOI: 10.1520/GTJ104408     Document Type: Article

References (31)

1. ASTM C845-04, 2004, "Standard Specification for Expansive Hydraulic Cement," Annual Book of ASTM Standards,Vol.4.01, ASTM International, West Conshohocken, PA.
2. Clough, G. W., Rad, N. S., Bachus, R. C., and Sitar, N., 1981, "Cemented Sands Under Static Loading," J. Geotech. Engrg. Div., Vol. 107, pp. 799-818.
3. Consoli, N. C., Fonseca, A. V., Cruz, R. C., and Heineck, K. S., 2009, "Fundamental Parameters for the Stiffness and Strength Control of Artificially Cemented Sand," J. Geotech. Geoenviron. Eng., Vol. 135, pp. 1347-1353.
4. Consoli, N. C., Rotta, G. V., and Prietto, P. D. M., 2006, "Yielding Compressibility-Strength Relationship for an Artificially Cemented Soil Cured Under Stress," Geotechnique, Vol. 56, pp. 69-72.
5. Coop, M. R. and Atkinson, J. H., 1993, "The Mechanics of Cemented Carbonate Sands," Geotechnique, Vol. 43, pp. 53-67.
6. Cuccovillo, T. and Coop, M. R., 1997, "Yielding and Prefailure Deformation of Structured Sands," Geotechnique, Vol. 47, pp. 491-508.
7. Cundall, P. A. and Strack, O. D. L., 1979, "Discrete Numerical Model for Granular Assemblies," Geotechnique, Vol. 29, pp. 47-65.
8. Delenne, J. Y., Youssoufi, M. S. E., Cherblanc, F., and Benet, J. C., 2004, "Mechanical Behaviours and Failure of Cohesive Granular Materials," Int. J. Numer. Analyt. Meth. Geomech., Vol. 28, pp. 1577-1594.
9. GB 201-2000, 2000, "Aluminate Cements," China National Standards Association, China.
10. GB/T 3190-2008, 2008, "Wrought Aluminium and Aluminium Alloys - Chemical Composition," China National Standards Association, China.
11. Huang, J. T. and Airey, D. W., 1998, "Properties of Artificially Cemented Carbonate Sand," J. Geotech. Geoenviron. Eng., Vol. 124, pp. 492-499.
12. Ismail, M. A., Joer, H. A., Sim, W. H., and Randolph, M. F., 2002, "Effect of Cement Type on Shear Behavior of Cemented Calcareous Soil," J. Geotech. Geoenviron. Eng., Vol. 128, pp. 520-529.
13. Jiang, M. J., Harris, D., and Yu, H.-S., 2005a, "Kinematic Models for Non-Coaxial Granular Materials: Part II: Evaluation," Int. J. Numer. Analyt. Meth. Geomech., Vol. 29, pp. 663-689.
14. Jiang, M. J., Harris, D., and Zhu, H. H., 2007a, "Future Continuum Models for Granular Materials in Penetration Analyses," Granular Matter, Vol. 9, pp. 97-108.
15. Jiang, M. J., Leroueil, S., and Konrad, J. M., 2005b, "Yielding of Microstructured Geomaterial by Distinct Element Method Analysis," J. Geotech. Engrg., Vol. 131, pp. 1209-1213.
16. Jiang, M. J., Leroueil, S., Zhu, H. H., Yu, H.-S., and Konrad, J. M., 2009, "Two-dimensional Discrete Element Theory for Rough Particles," Int. J. Geomech., Vol. 9, pp. 20-33.
17. Jiang, M. J., Yan, H. B., Zhu, H. H., and Utili, S., 2011, "Modeling Shear Behaviour and Strain Localization in Cemented Sands by Two-dimensional Distinct Element Method Analyses," Comput. Geotech., Vol. 38, pp. 14-29.
18. Jiang, M. J., Yu, H.-S., and Harris, D., 2005c, "A Novel Discrete Model for Granular Material Incorporating Rolling Resistance," Comput. Geotech., Vol. 32, pp. 340-357.
19. Jiang, M. J., Yu, H.-S., and Harris, D., 2006a, "Bonds Rolling Resistance and Its Effect on Yielding of Bonded Granulates by DEM Analyses," Int. J. Numer. Analyt. Meth. Geomech., Vol. 30, pp. 723-761.
20. Jiang, M. J., Yu, H.-S., and Harris, D., 2006b, "Discrete Element Modelling of Deep Penetration in Granular Soils," Int. J. Numer. Analyt. Meth. Geomech., Vol. 30, pp. 335-361.
21. Jiang, M. J., Yu, H. S., and Leroueil, S., 2007b, "A Simple and Efficient Approach to Capturing Bonding Effect in Naturally Microstructured Sands by Discrete Element Method," Int. J. Numer. Methods Eng., Vol. 69, pp. 1158-1193.
22. Jiang, M. J. and Zhu, H. H., 2007, "An Interpretation of the Internal Length in Chang's Couple-Stress Continuum for Bonded Granulates," Granular Matter, Vol. 9, pp. 431-437.
23. Jiang, M. J., Zhu, H. H., and Harris, D., 2008, "Classical and Non-Classical Kinematic Fields of Two-dimensional Penetration Tests on Granular Ground by Discrete Element Method Analyses," Granular Matter, Vol. 10, pp. 439-455.
24. Jiang, M. J., Zhu, H. H., and Li, X. M., 2010, "Strain Localization Analyses of Idealized Sands in Biaxial Tests by Distinct Element Method," Frontiers of Architecture and Civil Engineering in China (FAC), Vol. 4, pp. 208-222.
25. Lade, P. V. and Overton, D. D., 1989, "Cementation Effects in Frictional Materials," J. Geotech. Engrg., Vol. 115, pp. 1373-1387.
26. Rotta, G. V., Consoli, N. C., Prietto, P. D. M., Coop, M. R., and Graham, J., 2003, "Isotropic Yielding in an Artificially Cemented Soil Cured Under Stress," Geotechnique, Vol. 53, pp. 493-501.
27. Schnaid, F., Prietto, P. D. M., and Consoli, N. C., 2001, "Characterization of Cemented Sand in Triaxial Compression," J. Geotech. Geoenviron. Eng., Vol. 127, pp. 857-868.
28. Utili, S. and Nova, R., 2008, "DEM Analysis of Bonded Granular Geomaterials," Int. J. Numer. Analyt. Meth. Geomech., Vol. 32, pp. 1997-2031.
29. Wang, Y. H. and Leung, S. C., 2008a, "A Particulate-Scale Investigation of Cemented Sand Behavior," Can. Geotech. J., Vol. 45, pp. 29-44.
30. Wang, Y. H. and Leung, S. C., 2008b, "Characterization of Cemented Sand by Experimental and Numerical Investigations," J. Geotech. Geoenviron. Eng., Vol. 134, pp. 992-1004.
31. Wang, Y. H., Ma, C. H., and Yan, W. M., 2009, "Characterizing Bond Breakages in Cemented Sands Using a MEMS Accelerometer," Geotech. Test. J., Vol. 32, pp. 1-10.