Assessment of the NIOSH head-and-face anthropometric survey of U.S. respirator users

Assessment of the NIOSH Head-and-Face Anthropometric Survey of U.S. Respirator Users

Volumn , Issue , 2007, Pages 1-108

  Bailar, John C ^a   Meyer, Emily Ann ^b   Pool, Robert ^b  

^a UNIVERSITY OF CHICAGO   (United States)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84988949448     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.17226/11815     Document Type: Book

References (63)

1. Anthrotech. 2004. A head-and-face anthropometric survey of U.S. respirator users: Final report. Prepared by B. Bradtmiller and M. Friess for NIOSH/NPPTL.
2. Bureau of Mines. August 20, 1934. Procedure for testing filter-type dust, fume, and mist respirators for permissibility: Schedule 21b. Washington, DC: Bu- reau of Mines.
3. Bureau of Mines. March 23, 1965. Filter-type dust, fume, and mist respirators, require- ments investigation, testing, and certification: Schedule 21b. Washington, DC: Bureau of Mines.
4. Campbell, D. L., C. C. Coffey, and S. W. Lenhart. 2001. Respiratory protection as a function of respirator fitting characteristics and fit-test accuracy. Ameri- can Industrial Hygiene Association Journal 62:36-44.
5. Code of Federal Regulations. 1972. Respiratory protective devices: 30 CFR 11
6. Campbell, D. L.. 1995. Respiratory protective devices: 42 CFR § 84.
7. Campbell, D. L.. 1998. Respiratory protective devices: 29 CFR § 1910, 1915, 1917, 1918, 1926.
8. Campbell, D. L.. 2004. Respiratory protective devices: 42 C.F.R. § 84.135.
9. Drinker, P., and T. Hatch. 1954. Dust respirators and air masks. In Industrial dust: Hygienic significance, measurement, and control. 2nd ed, edited by P. Drinker, and T. Hatch. New York: McGraw-Hill. Pp. 333-346.
10. Hack, A. L., and J. T. McConville. 1978. Respirator protection factors: Part I - development of an anthropometric test panel. Am Ind Hyg Assoc J 39(12):970- 975.
11. Hack, A. L., E. C. Hyatt, B. J. Held, T. D. Moore, C. P. Richards, and J. T. McConville. 1974. Selection of respirator test panels representative of U.S. adult facial sizes. Los Alamos, NM: Los Alamos Scientific Laboratory.
12. Leigh, J. 1975. Dow chemical corporation: Quantitative respirator man-testing and anthropometric survey. Dow chemical corporation report to U.S. energy research and development administration. Golden, CO.
13. Stein, R. L. 1978. Selected head and facial dimensions of mine rescue team per- sonnel. American Industrial Hygiene Association Journal 39(7):576-578.
14. Zhuang, Z. 2001. Anthropometric survey of respirator users: Study protocol. National Institute for Occupational Safety and Health.
15. Zhuang, Z., and B. Bradtmiller. 2005. Head-and-face anthropometric survey of U.S. respirator users. J Occup Environ Hyg 2(11):567-576.
16. Zhuang, Z., J. Guan, H. Hsiao, and B. Bradtmiller. 2004. Evaluating the repre- sentativeness of the LANL respirator fit test panels for the current U.S. civil- ian workers. Journal of the International Society for Respiratory Protection 21:83-93.
17. Zhuang, Z., Coffey, C.C., and R.B. Ann. 2005. The effect of subject characteris- tics and respirator features on respirator fit. J Occup Environ Hyg 2(12):641- 649.
18. Aldridge, K., S. A. Boyadjiev, G. T. Capone, V. B. DeLeon, and J. T. Richtsmeier. 2005. Precision and error of three-dimensional phenotypic meas- ures acquired from 3dMD photogrammetric images. Am J Med Genet A 138(3):247-253.
19. Anthrotech. 2004. A head-and-face anthropometric survey of U.S. respirator users: Final report. Prepared by B. Bradtmiller and M. Friess for NIOSH/NPPTL.
20. Corner, B. D., and J. T. Richtsmeier. 1992. Cranial growth in the squirrel mon- key (saimiri sciureus): A quantitative analysis using three-dimensional coor- dinate data. Am J Phys Anthropol 87(1):67-81.
21. Gordon, C. C., T. Churchill, C. E. Clauser, B. Bradtmiller, J. T. McConville, I. Tebbetts, and R. A. Walker. 1989. 1988 anthropometric survey of U.S. Army personnel: Methods and summary statistics. United States Army Natick re- search, development, and engineering center.
22. Kohn, L., and Cheverud, J. 1992. Calibration, validation, and evaluation of scanning systems: Anthropometric imaging system repeatability, electronic imaging of the human body. Paper presented at Proceedings of a working group: CSERIAC, Dayton, OH. Pp. 114-123.
23. Richtsmeier, J. T., C. H. Paik, P. C. Elfert, T. M. Cole, 3rd, and H. R. Dahlman. 1995. Precision, repeatability, and validation of the localization of cranial landmarks using computed tomography scans. Cleft Palate Craniofac J 32(3):217-227
24. Valeri, C. J., T. M. Cole, 3rd, S. Lele, and J. T. Richtsmeier. 1998. Capturing data from three-dimensional surfaces using fuzzy landmarks. Am J Phys An- thropol 107(1):113-124.
25. Weinberg, S. M., and J. C. Kolar. 2005. Three-dimensional surface imaging: Limitations and considerations from the anthropometric perspective. J Craniofac Surg 16(5):847-851.
26. Weinberg, S. M., N. M. Scott, K. Neiswanger, and M. L. Marazita. 2005. In- traobserver error associated with measurements of the hand. Am J Hum Biol 17(3):368-371.
27. Zhuang, Z., and B. Bradtmiller. 2005. Head-and-face anthropometric survey of U.S. respirator users. J Occup Environ Hyg 2(11):567-576.
28. Anthrotech. 2004. A head-and-face anthropometric survey of U.S. respirator users: Final report. Prepared by B. Bradtmiller and M. Friess for NIOSH/NPPTL.
29. Camarota, S., and N. McArdle. 2003. Where immigrants live: An examination of state residency of the foreign born by country of origin in 1990 and 2000. Washington, DC: Center for Immigration Studies.
30. Ronningen, B. J. 2004. Estimates of selected immigrant populations: 2004. St. Paul, MN: Minnesota State Demographic Center.
31. U.S. Census Bureau. 2006. Ancestry: 2000. http://www.census.gov/prod/ 2004pubs/c2kbr-35.pdf (accessed December 15, 2006).
32. Zhuang, Z. 2001. Anthropometric survey of respirator users: Study protocol. Pittsburgh, PA: National Institute for Occupational Safety and Health.
33. Zhuang, Z., and B. Bradtmiller. 2005. Head-and-face anthropometric survey of U.S. respirator users. J Occup Environ Hyg 2(11):567-576.
34. Anthrotech. 2004. A head-and-face anthropometric survey of U.S. respirator users: Final report Prepared by B. Bradtmiller and M. Friess for NIOSH/NPPTL.
35. Brazile, W. J., R. M. Buchan, D. R. Sandfort, W. Melvin, J. A. Johnson, and M. Charney. 1998. Respirator fit and facial dimensions of two minority groups. Applied Occupational and Environmental Hygiene 13(4):233-237.
36. Civilian American and European Surface Anthropometry Resource. 2002. Final report from CAESAR. Falls Church, VA: General Dynamics International
37. Coffey, C. C., R. B. Lawrence, Z. Zhuang, D. L. Campbell, P. A. Jensen, and W. R. Myers. 2002. Comparison of five methods for fit-testing n95 filtering- facepiece respirators. Appl Occup Environ Hyg 17(10):723-730.
38. Colten, C. E. July 10, 2006. Presentation to Committee for the Assessment of the NIOSH Head-and-Face Anthropometric Survey of U.S. Respirator Users: Respirators: Design and anthropometry-3M OH&ESD. Pittsburgh, PA: Na- tional Personal Protective Technology Laboratory.
39. Frund, Z. N. July 10, 2006. Presentation to Committee for the Assessment of the NIOSH Head-and-Face Anthropometric Survey of U.S. Respirator Users: Manufacturer's perspective on anthropometric measurements study & design- ing masks to meet new panel. Pittsburgh, PA: National Personal Protective Technology Laboratory.
40. Gross, S. F., and S. W. Horstman. 1990. Half-mask respirator selection for a mixed worker group. Applied Occupational and Environmental Hygiene 5:229-235.
41. Hack, A. L., and J. T. McConville. 1978. Respirator protection factors: Part I- development of an anthropometric test panel. Am Ind Hyg Assoc J 39(12):970-975.
42. Hack, A. L., E. C. Hyatt, B. J. Held, T. D. Moore, C. P. Richards, and J. T. McConville. 1974. Selection of respirator test panels representative of U.S. adult facial sizes. Los Alamos, NM: Los Alamos Scientific Laboratory.
43. Han, D. H., and K. L. Choi. 2003. Facial dimensions and predictors of fit for half-mask respirators in Koreans. AIHA J (Fairfax, Va) 64(6):815-822.
44. Kim, H., D. H. Han, Y. M. Roh, K. Kim, and Y. G. Park. 2003. Facial anthro- pometric dimensions of Koreans and their associations with fit of quarter- mask respirators. Ind Health 41(1):8-18.
45. Liau, Y. H., A. Bhattacharya, H. E. Ayer, and C. Miller. 1982. Determination of critical anthropometric parameters for design of respirators. Paper read at American Industrial Hygiene Association, Cincinnati, OH.
46. McKay, R. T. July 10, 2006. Presentation to Committee for the Assessment of the NIOSH Head-and-Face Anthropometric Survey of U.S. Respirator Users: Respirator fitting issues. Pittsburgh, PA: National Personal Protective Tech- nology Laboratory.
47. Neyman, J. 1934. On the two different aspects of the representative method: The method of stratified sampling and the method of purposive selection. Journal of the Royal Society 97(4):558-625.
48. Oestenstad, R. K., and L. L. Perkins. 1992. An assessment of critical anthro- pometric dimensions for predicting the fit of a half-mask respirator. Am Ind Hyg Assoc J 53(10):639-644.
49. Oestenstad, R. K., H. K. Dillion, and L. L. Perkins. 1990. Distribution of face- seal leak sites on a half-mask respirator and their association with facial di- mensions. Am Ind Hyg Assoc J 51(5):285-290.
50. Zhuang, Z. 2001. Anthropometric survey of respirator users: Study protocol. Pittsburgh, PA: National Institute for Occupational Safety and Health.
51. Zhuang, Z. November 3, 2005. Presentation to Committee for the Assessment of the NIOSH Head-and-Face Anthropometric Survey of U.S. Respirator Users: Respirator fit test panels representing the current U.S. civilian workforce. Washington, DC: National Academy of Sciences Keck Center.
52. Zhuang, Z., and B. Bradtmiller. 2005. Head-and-face anthropometric survey of U.S. respirator users. J Occup Environ Hyg 2(11):567-576.
53. Zhuang, Z., J. Guan, H. Hsiao, and B. Bradtmiller. 2004. Evaluating the repre- sentativeness of the LANL respirator fit test panels for the current U.S. civil- ian workers. Journal of the International Society for Respiratory Protection 21:83-93.
54. Zhuang, Z., Coffey, C.C., and R.B. Ann. 2005. The effect of subject characteris- tics and respirator features on respirator fit. J Occup Environ Hyg 2(12):641- 649.
55. Code of Federal Regulations. 1998. Respiratory protective devices: 29 C.F.R. § 1910, 1915, 1917, 1918, 1926.
56. Coffey, C. C., D. L. Campbell, and Z. Zhuang. 1999. Simulated workplace per- formance of n95 respirators. Am Ind Hyg Assoc J 60(5):618-624.
57. Hack, A. L., E. C. Hyatt, B. J. Held, T. D. Moore, C. P. Richards, and J. T. McConville. 1974. Selection of respirator test panels representative of U.S. adult facial sizes. Los Alamos, NM: Los Alamos Scientific Laboratory.
58. Liu, Y., M. H. Stowe, D. Bello, S. R. Woskie, J. Sparer, R. Gore, F. Youngs, M. R. Cullen, and C. A. Redlich. 2006. Respiratory protection from isocyanate exposure in the autobody repair and refinishing industry. J Occup Environ Hyg 3(5):234-249.
59. McKay, R. T. July 10, 2006. Presentation to Committee for the Assessment of the NIOSH Head-and-Face Anthropometric Survey of U.S. Respirator Users: Respirator fitting issues. Pittsburgh, PA: National Personal Protective Tech- nology Laboratory.
60. U.S. Census Bureau. 2006. Occupations: 2000. http://www.census.gov/prod/ 2003pubs/c2kbr-25.pdf (accessed December 15, 2006).
61. U.S. Department of Labor. 2006. Career guide to industries: Construction. http://www.bls.gov/oco/cg/cgs003.htm (accessed December 15, 2006).
62. U.S. Department of Labor. 2006. Employed persons by detailed occupation, sex, race, and His- panic or Latino ethnicity. http://www.bls.gov/cps/cpsaat11.pdf (accessed De- cember 15, 2006).
63. Zhuang, Z. 2001. Anthropometric survey of respirator users: Study protocol. National Institute for Occupational Safety and Health.