Sheet-Like Lignin Particles as Multifunctional Fillers in Polypropylene

ACS Sustainable Chemistry and Engineering

Volumn 4, Issue 9, 2016, Pages 4997-5004

  Chen, Fenggui ^a   Liu, Wanshuang ^a,b   Seyed Shahabadi, Seyed Ismail ^a   Xu, Jianwei ^c   Lu, Xuehong ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^b DONGHUA UNIVERSITY   (China)

^c INSTITUTE OF MATERIALS RESEARCH AND ENGINEERING   (Singapore)

Author keywords

Antioxidant; Freeze drying; Lignin; Polypropylene; Sheet like; Toughness

Indexed keywords

ANTIOXIDANTS; ELASTIC MODULI; FREE RADICALS; POLYMERS; POLYPROPYLENES; TOUGHNESS;

ANTIOXIDANT EFFECT; ELONGATION AT BREAK; FREE RADICAL SCAVENGERS; FREEZE DRYING; SHEET-LIKE; TENSILE MECHANICAL PROPERTIES; THERMO-OXIDATIVE DEGRADATION; TOUGHENING EFFECTS;

LIGNIN;

ANTIOXIDANTS; FREEZE DRYING; LIGNINS; POLYPROPYLENE; TOUGHNESS;

EID: 84986189980     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/acssuschemeng.6b01369     Document Type: Article

References (44)

1. Calvo-Flores, F. G.; Dobado, J. A. Lignin as renewable raw material ChemSusChem 2010, 3, 1227-1235 10.1002/cssc.201000157
2. Gellerstedt, G. Softwood kraft lignin: Raw material for the future Ind. Crops Prod. 2015, 77, 845-854 10.1016/j.indcrop.2015.09.040
3. Norgren, M.; Edlund, H. Lignin: Recent advances and emerging applications Curr. Opin. Colloid Interface Sci. 2014, 19, 409-416 10.1016/j.cocis.2014.08.004
4. Thakur, V. K.; Thakur, M. K.; Raghavan, P.; Kessler, M. R. Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review ACS Sustainable Chem. Eng. 2014, 2, 1072-1092 10.1021/sc500087z
5. Imre, B.; Pukánszky, B. From natural resources to functional polymeric biomaterials Eur. Polym. J. 2015, 68, 481-487 10.1016/j.eurpolymj.2015.03.059
6. Kai, D.; Tan, M. J.; Chee, P. L.; Chua, Y. K.; Yap, Y. L.; Loh, X. J. Towards lignin-based functional materials in a sustainable world Green Chem. 2016, 18, 1175-1200 10.1039/C5GC02616D
7. Saito, T.; Brown, R. H.; Hunt, M. A.; Pickel, D. L.; Pickel, J. M.; Messman, J. M.; Baker, F. S.; Keller, M.; Naskar, A. K. Turning renewable resources into value-added polymer: development of lignin-based thermoplastic Green Chem. 2012, 14, 3295 10.1039/c2gc35933b
8. Grishechko, L. I.; Amaral-Labat, G.; Szczurek, A.; Fierro, V.; Kuznetsov, B. N.; Celzard, A. Lignin-phenol-formaldehyde aerogels and cryogels Microporous Mesoporous Mater. 2013, 168, 19-29 10.1016/j.micromeso.2012.09.024
9. Zhang, W.; Ma, Y.; Wang, C.; Li, S.; Zhang, M.; Chu, F. Preparation and properties of lignin-phenol-formaldehyde resins based on different biorefinery residues of agricultural biomass Ind. Crops Prod. 2013, 43, 326-333 10.1016/j.indcrop.2012.07.037
10. Sun, J.; Wang, C.; Yeo, J. C. C.; Yuan, D.; Li, H.; Stubbs, L. P.; He, C. Lignin Epoxy Composites: Preparation, Morphology, and Mechanical Properties Macromol. Mater. Eng. 2016, 301, 328-336 10.1002/mame.201500310
11. Xue, B.-L.; Wen, J.-L.; Sun, R.-C. Lignin-Based Rigid Polyurethane Foam Reinforced with Pulp Fiber: Synthesis and Characterization ACS Sustainable Chem. Eng. 2014, 2, 1474-1480 10.1021/sc5001226
12. Cinelli, P.; Anguillesi, I.; Lazzeri, A. Green synthesis of flexible polyurethane foams from liquefied lignin Eur. Polym. J. 2013, 49, 1174-1184 10.1016/j.eurpolymj.2013.04.005
13. Ding, R.; Wu, H.; Thunga, M.; Bowler, N.; Kessler, M. R. Processing and characterization of low-cost electrospun carbon fibers from organosolv lignin/polyacrylonitrile blends Carbon 2016, 100, 126-136 10.1016/j.carbon.2015.12.078
14. Sun, Y.; Yang, L.; Lu, X.; He, C. Biodegradable and renewable poly(lactide)-lignin composites: synthesis, interface and toughening mechanism J. Mater. Chem. A 2015, 3, 3699-3709 10.1039/C4TA05991C
15. Tran, C. D.; Chen, J.; Keum, J. K.; Naskar, A. K. A New Class of Renewable Thermoplastics with Extraordinary Performance from Nanostructured Lignin-Elastomers Adv. Funct. Mater. 2016, 26, 2677 10.1002/adfm.201504990
16. Chung, Y.-L.; Olsson, J. V.; Li, R. J.; Frank, C. W.; Waymouth, R. M.; Billington, S. L.; Sattely, E. S. A Renewable Lignin-Lactide Copolymer and Application in Biobased Composites ACS Sustainable Chem. Eng. 2013, 1, 1231-1238 10.1021/sc4000835
17. Gordobil, O.; Egüés, I.; Llano-Ponte, R.; Labidi, J. Physicochemical properties of PLA lignin blends Polym. Degrad. Stab. 2014, 108, 330-338 10.1016/j.polymdegradstab.2014.01.002
18. Hilburg, S. L.; Elder, A. N.; Chung, H.; Ferebee, R. L.; Bockstaller, M. R.; Washburn, N. R. A universal route towards thermoplastic lignin composites with improved mechanical properties Polymer 2014, 55, 995-1003 10.1016/j.polymer.2013.12.070
19. Klapiszewski, L.; Bula, K.; Sobczak, M.; Jesionowski, T. Influence of Processing Conditions on the Thermal Stability and Mechanical Properties of PP/Silica-Lignin Composites Int. J. Polym. Sci. 2016, 2016, 1 10.1155/2016/1627258
20. Sen, S.; Patil, S.; Argyropoulos, D. S. Thermal properties of lignin in copolymers, blends, and composites: a review Green Chem. 2015, 17, 4862-4887 10.1039/C5GC01066G
21. Liu, L.; Qian, M.; Song, P. a.; Huang, G.; Yu, Y.; Fu, S. Fabrication of Green Lignin-based Flame Retardants for Enhancing the Thermal and Fire Retardancy Properties of Polypropylene/Wood Composites ACS Sustainable Chem. Eng. 2016, 4, 2422-2431 10.1021/acssuschemeng.6b00112
22. Thakur, V. K.; Thakur, M. K.; Gupta, R. K. Review: Raw Natural Fiber-Based Polymer Composites Int. J. Polym. Anal. Charact. 2014, 19, 256-271 10.1080/1023666X.2014.880016
23. Ye, Q.; Zhou, F.; Liu, W. Bioinspired catecholic chemistry for surface modification Chem. Soc. Rev. 2011, 40, 4244-4258 10.1039/c1cs15026j
24. Yearla, S. R.; Padmasree, K. Preparation and characterisation of lignin nanoparticles: evaluation of their potential as antioxidants and UV protectants J. Exp. Nanosci. 2016, 11, 289-302 10.1080/17458080.2015.1055842
25. Phua, S. L.; Yang, L.; Toh, C. L.; Guoqiang, D.; Lau, S. K.; Dasari, A.; Lu, X. Simultaneous enhancements of UV resistance and mechanical properties of polypropylene by incorporation of dopamine-modified clay ACS Appl. Mater. Interfaces 2013, 5, 1302-1309 10.1021/am3024405
26. Pouteau, C.; Dole, P.; Cathala, B.; Averous, L.; Boquillon, N. Antioxidant properties of lignin in polypropylene Polym. Degrad. Stab. 2003, 81, 9-18 10.1016/S0141-3910(03)00057-0
27. Sadeghifar, H.; Argyropoulos, D. S. Correlations of the Antioxidant Properties of Softwood Kraft Lignin Fractions with the Thermal Stability of Its Blends with Polyethylene ACS Sustainable Chem. Eng. 2015, 3, 349-356 10.1021/sc500756n
28. Gadioli, R.; Morais, J. A.; Waldman, W. R.; De Paoli, M.-A. The role of lignin in polypropylene composites with semi-bleached cellulose fibers: Mechanical properties and its activity as antioxidant Polym. Degrad. Stab. 2014, 108, 23-34 10.1016/j.polymdegradstab.2014.06.005
29. Yeo, J.-S.; Seong, D.-W.; Hwang, S.-H. Chemical surface modification of lignin particle and its application as filler in the polypropylene composites J. Ind. Eng. Chem. 2015, 31, 80-85 10.1016/j.jiec.2015.06.010
30. Hu, L.; Stevanovic, T.; Rodrigue, D. Compatibilization of Kraft Lignin-Polyethylene Composites Using Unreactive Compatibilizers J. Appl. Polym. Sci. 2014, 131, n/a 10.1002/app.41040
31. Lee, H. J.; Lee, H. K.; Lim, E.; Song, Y. S. Synergistic effect of lignin/polypropylene as a compatibilizer in multiphase eco-composites Compos. Sci. Technol. 2015, 118, 193-197 10.1016/j.compscitech.2015.08.018
32. Laurichesse, S.; Avérous, L. Chemical modification of lignins: Towards biobased polymers Prog. Polym. Sci. 2014, 39, 1266-1290 10.1016/j.progpolymsci.2013.11.004
33. Sun, H.; Xu, Z.; Gao, C. Multifunctional, ultra-flyweight, synergistically assembled carbon aerogels Adv. Mater. 2013, 25, 2554-2560 10.1002/adma.201204576
34. He, F.; Sui, C.; He, X.; Li, M. Facile synthesis of strong alumina-cellulose aerogels by a freeze-drying method Mater. Lett. 2015, 152, 9-12 10.1016/j.matlet.2015.03.058
35. Hu, H.; Zhao, Z.; Wan, W.; Gogotsi, Y.; Qiu, J. Ultralight and Highly Compressible Graphene Aerogels Adv. Mater. 2013, 25, 2219-2223 10.1002/adma.201204530
36. Kitajima, S.; Tominaga, Y. Improvement in dispersion and ionic conductivity of polyether/freeze-dried clay composites using supercritical carbon dioxide as treatment medium Ionics 2012, 18, 845-851 10.1007/s11581-012-0731-y
37. Chung, N. O.; Lee, M. K.; Lee, J. Mechanism of freeze-drying drug nanosuspensions Int. J. Pharm. 2012, 437, 42-50 10.1016/j.ijpharm.2012.07.068
38. Ramanathan, T.; Abdala, A. A.; Stankovich, S.; Dikin, D. A.; Herrera-Alonso, M.; Piner, R. D.; Adamson, D. H.; Schniepp, H. C.; Chen, X.; Ruoff, R. S.; Nguyen, S. T.; Aksay, I. A.; Prud'Homme, R. K.; Brinson, L. C. Functionalized graphene sheets for polymer nanocomposites Nat. Nanotechnol. 2008, 3, 327-331 10.1038/nnano.2008.96
39. Bozsódi, B.; Romhányi, V.; Pataki, P.; Kun, D.; Renner, K.; Pukánszky, B. Modification of interactions in polypropylene/lignosulfonate blends Mater. Des. 2016, 103, 32-39 10.1016/j.matdes.2016.04.061
40. Bula, K.; Klapiszewski, Ł.; Jesionowski, T. A novel functional silica/lignin hybrid material as a potential bio-based polypropylene filler Polym. Compos. 2015, 36, 913-922 10.1002/pc.23011
41. Zuiderduin, W. C. J.; Westzaan, C.; Huétink, J.; Gaymans, R. J. Toughening of polypropylene with calcium carbonate particles Polymer 2003, 44, 261-275 10.1016/S0032-3861(02)00769-3
42. Liu, W.; Zhou, R.; Goh, H. L. S.; Huang, S.; Lu, X. From Waste to Functional Additive: Toughening Epoxy Resin with Lignin ACS Appl. Mater. Interfaces 2014, 6, 5810-5817 10.1021/am500642n
43. Bhattacharyya, A. R.; Sreekumar, T. V.; Liu, T.; Kumar, S.; Ericson, L. M.; Hauge, R. H.; Smalley, R. E. Crystallization and orientation studies in polypropylene/single wall carbon nanotube composite Polymer 2003, 44, 2373-2377 10.1016/S0032-3861(03)00073-9
44. Borysiak, S.; Klapiszewski, Ł.; Bula, K.; Jesionowski, T. Nucleation ability of advanced functional silica/lignin hybrid fillers in polypropylene composites J. Therm. Anal. Calorim. 2016, 1-12 10.1007/s10973-016-5390-1