Wind power integration in hybrid power system with active energy management

COMPEL - The international journal for computation and mathematics in electrical and electronic engineering

Volumn 30, Issue 1, 2011, Pages 246-264

  Masmoudi, Ahmed ^a   Tankari Mahamadou, Abdou ^a   Camara Mamadou, Bailo ^a   Brayima, Dakyo ^a   Cristian, Nichita ^a  

^a UNIVERSITY OF LE HAVRE   (France)

Author keywords

Diesel generator; Energy; Storage devices; Turbulence; Wind power

Indexed keywords

EID: 84986052326     PISSN: 03321649     EISSN: None     Source Type: Journal    
DOI: 10.1108/03321641111091548     Document Type: Article

References (34)

1. Abbey, C. and Joos, G. (2007), “Supercapacitor energy storage for wind energy applications”, IEEE Trans. Ind. Applications, Vol. 43 No. 3, pp. 769–76.
2. Abbey, C. and Joos, G. (2009), “A stochastic optimization approach to rating of energy storage systems in wind-diesel isolated grids”, IEEE Trans. on Power Systems, Vol. 24 No. 1, pp. 418–26.
3. Apt, J. (2007), “The spectrum of power from wind turbines”, Journal of Power Sources, Vol. 169, pp. 369–74.
4. Baek, S.H., Cho, S.S. and Joo, W.S. (2008), “Fatigue life prediction based on the rainflow cycle counting method for the end beam of a freight car bogie”, International Journal of Automotive Technology, Vol. 9 No. 1, pp. 95–101.
5. Bindner, H., Cronin, T., Lundsager, P., Manwell, J., Abdulwahid, U. and Baring-Gould, I. (2005), Lifetime Modelling of Lead Acid Batteries, Riso National Laboratory, Roskilde.
6. Burton, T., Sharpe, D. and Bossanyi, E. (2001), Wind Energy Handbook, Wiley, New York, NY.
7. Camara, M.B., Gualous, H., Gustin, F. and Berthon, A. (2008), “Design and new control of DC/DC converters to share energy between supercapacitors and batteries in hybrid vehicles”, IEEE Trans. Vehicular Technology, Vol. 57 No. 5, pp. 2721–35.
8. Camara, M.B., Gualous, H., Gustin, F., Berthon, A. and Dakyo, B. (2010), “DC/DC converters design for supercapacitors and battery power management in hybrid vehicle applications-polynomial control strategy”, IEEE Trans. Ind. Electronics, Vol. 57 No. 2, pp. 587–97.
9. Deliyannis, T., Sun, Y. and Fidker, J.K. (1999), Continuous Time Active Filter Design, CRC Press LLC, Baco Raton, FL.
10. Dong-Jing, L. and Li, W. (2008), “Small-signal stability analysis of an autonomous hybrid renewable energy power generation/energy storage system Part I: time-domain simulations”, IEEE Trans. on Energy Conv., Vol. 23 No. 1, pp. 311–20.
11. Faruk, A.B. and Amirnaser, Y. (2009), “Multimode control of a DFIG-based wind-power unit for remote applications”, IEEE Trans. on Power Delivery, Vol. 24 No. 4, pp. 2079–89.
12. Gabriel, C., Stefan, B., Mircea, M.R., Christophe, S. and Benoit, R. (2010), “Design and control strategies of an induction-machine-based flywheel energy storage system associated to a variable-speed wind generator”, IEEE Trans. on Energy Conv., Vol. 25 No. 2, pp. 526–34.
13. Grzegorz, I. and Wlodzimierz, K. (2008), “DFIG-based power generation system with UPS function for variable-speed applications”, IEEE Trans. Ind. Electronics, Vol. 55 No. 8, pp. 3047–54.
14. Guoju, Z., Xisheng, T. and Zhiping, Q. (2010), “Research on battery supercapacitor hybrid storage and its application in microgrid”, Proc. IEEE Asia-Pacific Power and Energy Engineering Conf. (APPEEC), pp. 1–4.
15. Hansen, A.D., Sørensen, P., Hansen, L.H. and Bindner, H. (2000), Models for a Stand-Alone PV System, Riso National Laboratory, Roskilde.
16. Koczara, W., Chłodnicki, Z., Al-Khayat, N. and Brown, N.L. (2008a), “Energy management and power flow of decoupled generation system for power conditioning of renewable energy sources”, Proc. IEEE Int. Conf. on Power Electronics and Motion Control (EPE-PEMC), Poznan, Poland, pp. 2150–5.
17. Koczara, W., Iwanski, G., Kaminski, B., Cirstea, M. and Brown, N. (2008b), “Power distribution in RES-diesel autonomous power system with doubly fed induction generator for reduction of fuel consumption”, IEEE Conf. on Optimization of Electrical and Electronic Equipment (OPTIM), pp. 339–44.
18. Laxman, M., Shigenori, I., Hirofumi, A. and Jun, A. (2009), “State-of-charge (SOC)-balancing control of a battery energy storage system based on a cascade PWM converter”, IEEE Trans. on Power Electronics, Vol. 24 No. 6, pp. 1628–36.
19. Li, W. and Joos, G. (2008), “A power electronic interface for a battery supercapacitors hybrid energy storage system for wind applications”, Proc. IEEE Annual Power Electronics Specialists Conf. (PESC), pp. 1762–8.
20. Li, W., Joos, G. and Abbey, C. (2006), “Attenuation of wind power fluctuations in wind turbine generators using a DC bus capacitor based filtering control scheme”, Proc. of IEEE Industry Applications Society Conf., Tampa, FL, USA, pp. 216–21.
21. Li, W., Joos, G. and Belanger, J. (2010), “Real-time simulation of a wind turbine generator coupled with a battery supercapacitor energy storage system”, IEEE Trans. Ind. Electronics, Vol. 57 No. 4, pp. 1137–45.
22. Li, X., Hu, C., Liu, C. and Xu, D. (2008), “Modelling and control of aggregated super-capacitor energy storage system for wind power generation”, Proc. of IEEE Ind. Electronics Society Conf. (IECON), pp. 3370–5.
23. Luo, C., Far, H.G., Banakar, H., Keung, P. and Ooi, B. (2007), “Estimation of wind penetration as limited by frequency deviation”, IEEE Trans. on Energy Conv., Vol. 22 No. 3, pp. 783–91.
24. Nichita, C., Luca, D., Dakyo, B. and Ceanga, E. (2002), “Large band simulation of the wind speed for real time wind turbine simulators”, IEEE Trans. on Energy Conv., Vol. 17 No. 4, pp. 523–9.
25. Qu, L. and Qiao, W. (2009), “Constant power control and fault-ride-through enhancement of DFIG wind turbines with energy storage”, Proc. IEEE Industry Applications Society Meeting, Houston, TX, USA, pp. 1–8.
26. Rawn, B.G., Lehn, P.W. and Maggiore, M. (2007), “Control methodology to mitigate the grid impact of wind turbines”, IEEE Trans. on Energy Conv., Vol. 22 No. 2, pp. 431–8.
27. Sercan, T., Mesut, E.B., Alex, Q.H., Subhashish, B. and Anderson, L. (2009), “Control strategies for battery energy storage for wind farm dispatching”, IEEE Trans. on Energy Conv., Vol. 24 No. 3, pp. 725–32.
28. Suvire, G.O. and Mercado, P.E. (2009), “Improvement of power quality in wind energy applications using a DSTATCOM coupled with a flywheel energy storage system”, Proc. IEEE Int. Power Electronics Conf. (COBEP), Brazilian, Bonito-Mato Grosso do Sul, pp. 58–64.
29. Takahashi, R. and Tamura, J. (2008), “Frequency control of isolated power system with wind farm by using flywheel energy storage system”, Proc. on IEEE Int. Conf. on Electrical Machines (ICEM), pp. 1–6.
30. Tankari, M.A., Dakyo, B. and Nichita, C. (2008), “Improved sizing method of storage units for hybrid wind-diesel powered system”, Proc. of EPE Conf. on Power Electronics and Motion Control, pp. 1911–7.
31. Tankari, M.A., Camara, M.B., Dakyo, B. and Nichita, C. (2010), “Ultracapacitors and batteries integration in wind energy hybrid system – using the frequencies distribution method”, Int. Review of Electrical Engineering (IREE), Vol. 5 No. 2, pp. 521–9.
32. Xiang-Dong, S., Kang-Hoon, K., Byung-Gyu, Y. and Mikihiko, M. (2009), “Fuzzy-logic-based V/f control of an induction motor for a DC grid power-leveling system using flywheel energy storage equipment”, IEEE Trans. Ind. Electronics, Vol. 56 No. 8, pp. 3161–8.
33. Yao, D.L., Choi, S.S., Tseng, K.J. and Lie, T.T. (2009), “A statistical approach to the design of a dispatchable wind power-battery energy storage system”, IEEE Trans. on Energy Conv., Vol. 24 No. 4, pp. 916–25.
34. Younseok, C. and Kyu, G.C. (2009), “On pascal matrix for transforming lowpass analog filter to bandpass digital filter”, IEEE Signal Processing Letters, Vol. 16 No. 2, pp. 77–80.