On the relationship between fibre composition and material properties following periodate oxidation and borohydride reduction of lignocellulosic fibres

Cellulose

Volumn 23, Issue 6, 2016, Pages 3495-3510

  López Durán, Verónica ^a   Larsson, Per A ^a   Wågberg, Lars ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Borohydride reduction; Dialcohol cellulose; Dialdehyde cellulose; Lignocellulose fibres; Periodate oxidation; Strain at break; Tensile strength

Indexed keywords

ALCOHOLS; CELLULOSE; CROSSLINKING; DUCTILITY; FIBERS; LIGNIN; OXIDATION; POLYOLS;

BOROHYDRIDE REDUCTIONS; DIALDEHYDE CELLULOSE; LIGNOCELLULOSIC FIBRES; PERIODATE OXIDATION; STRAIN AT BREAK; STRENGTH AND DUCTILITIES; STRUCTURAL AND MECHANICAL PROPERTIES; SUPRAMOLECULAR ORDERING;

TENSILE STRENGTH;

EID: 84984923972     PISSN: 09690239     EISSN: 1572882X     Source Type: Journal    
DOI: 10.1007/s10570-016-1061-4     Document Type: Article

References (59)

1. Adler E, Hernestam S (1955) Estimation of phenolic hydroxyl groups in Lignin. I. Periodate oxidation of guaiacol compounds. Acta Chem Scand 9:319–334. doi:10.3891/acta.chem.scand.09-0319
2. Aimin T, Hongwei Z, Gang C et al (2005) Influence of ultrasound treatment on accessibility and regioselective oxidation reactivity of cellulose. Ultrason Sonochem 12:467–472. doi:10.1016/j.ultsonch.2004.07.003
3. Åkerholm M, Salmén L (2001) Interactions between wood polymers studied by dynamic FT-IR spectroscopy. Polymer (Guildford) 42:963–969. doi:10.1016/S0032-3861(00)00434-1
4. Alam MN, Antal M, Tejado A, van de Ven TGM (2012) Salt-induced acceleration of chemical reactions in cellulose nanopores. Cellulose 19:517–522. doi:10.1007/s10570-011-9649-1
5. Argyropoulos DS, Heitner C, Schmidt JA (1995) Observation of quinonoid groups during the light-induced yellowing of softwood mechanical pulp. Res Chem Intermed 21:263–274. doi:10.1007/BF03052257
6. Batchelor WJ, Westerlind BS (2003) Measurement of short span stress–strain curves of paper. Nord Pulp Pap Res J 18:44–50. doi:10.3183/NPPRJ-2003-18-01-p044-050
7. Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fibres. Prog Polym Sci 24:221–274. doi:10.1016/S0079-6700(98)00018-5
8. Chaikin SW, Brown WG (1949) Reduction of aldehydes, ketones and acid chlorides by sodium borohydride. J Am Chem Soc 71:122–125. doi:10.1021/ja01169a033
9. Chavan VB, Sarwade BD, Varma AJ (2002) Morphology of cellulose and oxidised cellulose in powder form. Carbohydr Polym 50:41–45. doi:10.1016/S0144-8617(01)00367-8
10. Christov LP, Prior BA (1993) Xylan removal from dissolving pulp using enzymes of Aureobasidium pullulans. Biotechnol Lett 15:1269–1274
11. Crescenzi V, Dentini M, Meoli C et al (1984) Dicarboxyamylose and dicarboxycellulose, stereoregular polyelectrolytes: binding of calcium and magnesium ions. Int J Biol Macromol 6:142–144. doi:10.1016/0141-8130(84)90055-2
12. 13C-NMR. Cellulose 8:103–111. doi:10.1023/A:1016645809958
13. French AD, Santiago Cintrón M (2013) Cellulose polymorphy, crystallite size, and the Segal crystallinity index. Cellulose 20:583–588. doi:10.1007/s10570-012-9833-y
14. Gärdlund L, Forsström J, Andreasson B, Wågberg L (2005) Influence of polyelectrolyte complexes on the strength properties of papers from unbleached kraft pulps with different yields. Nord Pulp Pap Res J 20:36–42
15. Gimåker M, Olsson A-M, Salmén L, Wågberg L (2009) On the mechanisms of mechano-sorptive creep reduction by chemical cross-linking. In: Advances in pulp and paper research, 14th fundamental research symposium, Oxford, UK, pp 1001–1017
16. Gosselink RJA, van Dam JEG, de Jong E et al (2011) Effect of periodate on lignin for wood adhesive application. Holzforschung 65:155–162. doi:10.1515/HF.2011.025
17. Guigo N, Mazeau K, Putaux J-L, Heux L (2014) Surface modification of cellulose microfibrils by periodate oxidation and subsequent reductive amination with benzylamine: a topochemical study. Cellulose 21:4119–4133. doi:10.1007/s10570-014-0459-0
18. Hosseinpourpia R, Adamopoulos S, Mai C (2015) Tensile strength of handsheets from recovered fibers treated with N-methylol melamine and 1,3-dimethylol-4,5-dihydroxyethyleneurea. J Appl Polym Sci 132:41280. doi:10.1002/app.41290
19. Jackson EL, Hudson CS (1937) Application of the cleavage type of oxidation by periodic acid to starch and cellulose. J Am Chem Soc 59:2049–2050
20. Kalia S, Dufresne A, Cherian BM et al (2011) Cellulose-based bio- and nanocomposites: a review. Int J Polym Sci. doi:10.1155/2011/837875
21. Kim UJ, Kuga S, Wada M et al (2000) Periodate oxidation of crystalline cellulose. Biomacromolecules 1:488–492. doi:10.1021/bm0000337
22. Klemm D, Kramer F, Moritz S et al (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50:5438–5466. doi:10.1002/anie.201001273
23. Koprivica S, Siller M, Hosoya T et al (2016) Regeneration of aqueous periodate solutions by ozone treatment: a sustainable approach for dialdehyde cellulose production. ChemSusChem 9:825–833. doi:10.1002/cssc.201501639
24. Lai Y-Z, Guo X-P, Situ W (1990) Estimation of phenolic hydroxyl groups in wood by a periodate oxidation method. J Wood Chem Technol 10:365–377. doi:10.1080/02773819008050245
25. Langkilde FW, Svantesson A (1995) Identification of celluloses with Fourier-transform (FT) mid-infrared, FT-Raman and near-infrared spectrometry. J Pharm Biomed Anal 13:409–414. doi:10.1016/0731-7085(95)01298-Y
26. Larsson PA, Wågberg L (2016) Towards natural-fibre-based thermoplastic films produced by conventional papermaking. Green Chem 18:3324–3333. doi:10.1039/C5GC03068D
27. Larsson PA, Gimåker M, Wågberg L (2008) The influence of periodate oxidation on the moisture sorptivity and dimensional stability of paper. Cellulose 15:837–847. doi:10.1007/s10570-008-9243-3
28. Larsson PA, Kochumalayil JJ, Wågberg L (2013) Oxygen and water vapour barrier films with low moisture sensitivity fabricated from self-cross-linking fibrillated cellulose. In: the pulp and paper research fundamental research society, 15th fundamental research symposium, Lancashire, UK, pp 851–866
29. Larsson PA, Berglund LA, Wågberg L (2014a) Ductile all-cellulose nanocomposite films fabricated from core–shell structured cellulose nanofibrils. Biomacromolecules 15:2218–2223. doi:10.1021/bm500360c
30. Larsson PA, Berglund LA, Wågberg L (2014b) Highly ductile fibres and sheets by core–shell structuring of the cellulose nanofibrils. Cellulose 21:323–333. doi:10.1007/s10570-013-0099-9
31. Liimatainen H, Sirviö J, Sundman O et al (2012) Use of nanoparticular and soluble anionic celluloses in coagulation-flocculation treatment of kaolin suspension. Water Res 46:2159–2166. doi:10.1016/j.watres.2012.01.035
32. Liimatainen H, Sirviö J, Pajari H et al (2013) Regeneration and recycling of aqueous periodate solution in dialdehyde cellulose production. J Wood Chem Technol 33:258–266. doi:10.1080/02773813.2013.783076
33. Lister MW, Rosenblum P (1961) The oxidation of nitrite and iodate ions by hypochlorite ons. Can J Chem 39:1645–1651. doi:10.1139/v61-211
34. Maekawa E, Koshijima T (1984) Properties of 2,3-dicarboxy cellulose combined with various metallic ions. J Appl Polym Sci 29:2289–2297. doi:10.1002/app.1984.070290705
35. Maekawa E, Koshijima T (1990) Preparation and characterization of hydroxamic acid derivative and its metal complexes derived from cellulose. J Appl Polym Sci 40:1601–1613. doi:10.1002/app.1990.070400916
36. Maekawa E, Koshijima T (1991) Preparation and structural consideration of nitrogen-containing derivatives obtained from dialdehyde celluloses. J Appl Polym Sci 42:169–178. doi:10.1002/app.1991.070420120
37. Marton J, Adler E (1961) Carbonyl groups in lignin III. Mild catalytic hydrogenation of Björkman Lignin. Acta Chem Scand 15:370–383
38. Mehltretter CL (1955) Electrochemical production of periodate oxypolysaccharides US 2713553A
39. Okita Y, Saito T, Isogai A (2009) TEMPO-mediated oxidation of softwood thermomechanical pulp. Holzforschung 63:529–535. doi:10.1515/HF.2009.096
40. Palme A, Theliander H, Brelid H (2016) Acid hydrolysis of cellulosic fibres: comparison of bleached kraft pulp, dissolving pulps and cotton textile cellulose. Carbohydr Polym 136:1281–1287. doi:10.1016/j.carbpol.2015.10.015
41. Patterson AL (1939) The scherrer formula for X-ray particle size determination. Phys Rev 56:978–982. doi:10.1103/PhysRev.56.978
42. Qiu X, Hu S (2013) ‘Smart’ materials based on cellulose: a review of the preparations, properties, and applications. Materials (Basel) 6:738–781. doi:10.3390/ma6030738
43. Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. doi:10.1177/004051755902901003
44. Sehaqui H, Allais M, Zhou Q, Berglund LA (2011) Wood cellulose biocomposites with fibrous structures at micro- and nanoscale. Compos Sci Technol 71:382–387. doi:10.1016/j.compscitech.2010.12.007
45. Seth RS (1990) Fibre quality factors in papermaking-I. The importance of fibre length and strength. Mater Res Soc Symp Proc Mater Res Soc 197:125–141
46. Sirviö J, Honka A, Liimatainen H et al (2011a) Synthesis of highly cationic water-soluble cellulose derivative and its potential as novel biopolymeric flocculation agent. Carbohydr Polym 86:266–270. doi:10.1016/j.carbpol.2011.04.046
47. Sirviö J, Hyvakko U, Liimatainen H et al (2011b) Periodate oxidation of cellulose at elevated temperatures using metal salts as cellulose activators. Carbohydr Polym 83:1293–1297. doi:10.1016/j.carbpol.2010.09.036
48. Sirviö J, Liimatainen H, Niinimäki J, Hormi O (2011c) Dialdehyde cellulose microfibers generated from wood pulp by milling-induced periodate oxidation. Carbohydr Polym 86:260–265. doi:10.1016/j.carbpol.2011.04.054
49. Veelaert S, de Wit D, Tournois H (1994) An improved kinetic model for the periodate oxidation of starch. Polymer (Guildford) 35:5091–5097. doi:10.1016/0032-3861(94)90670-X
50. Vishtal A, Retulainen E (2014) Boosting the extensibility potential of fibre networks: a review. BioResources 9:7933–7983
51. Vuoti S, Laatikainen E, Heikkinen H et al (2013) Chemical modification of cellulosic fibers for better convertibility in packaging applications. Carbohydr Polym 96:549–559. doi:10.1016/j.carbpol.2012.07.053
52. Wågberg L, Annergren G (1997) Physicochemical characterization of papermaking fibres. In: The fundamentals of papermaking materials—11th fundamental research symposium, vol 1, Fundamental Research Committee and Pira International, Leatherhead, pp 1–82
53. Wågberg L, Hägglund R (2001) Kinetics of polyelectrolyte adsorption on cellulosic fibers. Langmuir 17:1096–1103. doi:10.1021/la000629f
54. Weatherwax RC, Caulfield DF (1978) The pore structure of papers wet stiffened by formaldehyde crosslinking. II. Results from nitrogen sorption. J Colloid Interface Sci 67:506–515. doi:10.1016/0021-9797(78)90241-2
55. Zeronian SH, Hudson FL, Peters RH (1964) The mechanical properties of paper made from periodate oxycellulose pulp and from the same pulp after reduction with borohydride. Tappi 47:557–564
56. Zeronian SH, Bertoniere NR, Alger KW et al (1989) Effect of dimethyloldihydroxyethyleneurea on the properties of cellulosic fibers. Text Res J 59:484–492
57. Zhang J, Jiang N, Dang Z et al (2008) Oxidation and sulfonation of cellulosics. Cellulose 15:489–496. doi:10.1007/s10570-007-9193-1
58. Zhang S, Fei B, Yu Y et al (2013) Effect of the amount of lignin on tensile properties of single wood fibers. For Sci Pract 15:56–60. doi:10.1007/s11632-013-0106-0
59. Zhao H, Heindel ND (1991) Determination of degree of substitution of formyl groups in polyaldehyde dextran by the hydroxylamine hydrochloride method. Pharm Res 8:400–402