A Study on the Morphology, Mechanical, and Electrical Performance of Polyaniline-modified Wood - A Semiconducting Composite Material

BioResources

Volumn 9, Issue 3, 2014, Pages 5007-5023

  Hassel, Beatriz I ^a   Trey, Stacy ^b,c   Leijonmarck, Simon ^b   Johansson, Mats ^b  

^a UPPSALA UNIVERSITY   (Sweden)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^c SP TECHNICAL RESEARCH INSTITUTE OF SWEDEN   (Sweden)

Author keywords

Electrical properties; Electron microscopy; Mechanical properties; Smart materials

Indexed keywords

COMPOSITE MATERIALS; CORROSION; GLASS TRANSITION; HEAVY METALS; LIGNIN; MORPHOLOGY; POLYANILINE; POLYMERIZATION; SOLVENTS;

COMPOSITE SPECIMENS; ELECTRICAL PERFORMANCE; ELECTROCHEMICAL MODIFICATION; IN-SITU POLYMERIZATION; LIGNIN COMPONENTS; MAXIMUM STRENGTH; MECHANICAL PROPERTIES OF WOOD; POLYANILINES (PANI);

WOOD;

ANATOMY; COMPOSITES; CORROSION; HEAVY METALS; POLYMERIZATION;

EID: 84984913428     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.3.5007-5023     Document Type: Article

References (24)

1. Ansari, R. (2006). “Application of polyaniline and its composites for adsorption/recovery of chromium (VI) from aqueous solutions,” Acta Chim. Slov. 53(1), 88-94.
2. Bertaud, F., and Holmbom, B. (2004). “Chemical composition of earlywood and latewood in Norway spruce heartwood, sapwood and transition zone wood,” Wood Sci. Technol. 38(4), 245-256.
3. Bouajila, J., Dole, P., Joly, C., and Limare, A. (2006). “Some laws of a lignin plasticization,” J. Appl. Polym. Sci 102(2), 1445-1451.
4. Cronier, D., Monties, B., and Chabbert, B. (2005). “Structure and chemical composition of bast fibers isolated from developing hemp stem,” J. Agric. Food Chem. 53(21), 8279-8289.
5. Gerhards, C. C. (1980). “Effect of moisture content and temperature on the mechanical properties of wood: An analysis of immediate effects,” Forest Products Laboratory, Forest Service, U.S. Department of Agriculture, Madison, WI.
6. Green, D. W., and Kretschmann, D. E. (1994). “Moisture content and properties of clear southern pine,” US Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI.
7. Heeger, A. J. (2001). “Semiconducting and metallic polymers: The fourth generation of polymeric materials,” J. Phys. Chem. B 105(36), 8475-8491.
8. Huang, W. S., Humphrey, B. D., and MacDiarmid, A. G. (1986). “Polyaniline, a novel conducting polymer - Morphology and chemistry of its oxidation and reduction in aqueous-electrolytes,” J. Chem. Soc. Farad. T. 1 82(1), 2385-2400.
9. Jafarzadeh, S., Johansson, M, Sundell, P-E., Claudino, M., Pan, J., and Claesson, P. M. (2013). “UV-curable acrylate-based nanocomposites: Effect of polyaniline additives on the curing performance,” Polym. Adv. Tech. 24(7), 668-678.
10. Kretschmann, D. E., and Green, D. W. (1995). “Modeling moisture content - Mechanical property relationships for clear Southern Pine,” USDA, Forest Service, Forest Products Laboratory, Madison, WI.
11. Madani, M., Aly, S. S., and El-Sayed, S. M. (2010). “Dielectric relaxation of new aniline methyl methacrylate copolymer synthesized by gamma irradiation initiated polymerization,” High Perform. Polym. 22(5), 515-533.
12. Park, S. K., Lee, S. Y., Lee, C. S., Kim, H. M., Joo, J., Beag, Y. W., and Koh, S. K. (2004). “High energy (MeV) ion-irradiated π-conjugated polyaniline: Transition from insulating state to carbonized conducting state,” J. Appl. Phys. 96(4), 1914-1918.
13. Qaiser, A. A., Hyland, M. M., and Patterson, D. A. (2009). “Control of polyaniline deposition on microporous cellulose ester membranes by in situ chemical polymerization,” J. Phys. Chem. B 113(45), 14986-14993.
14. Razak, S. I. A., Rahman, W. A. W. A., Sharif, N. F. A., Nayan, N. H. M., Saidi, M. A. A., and Yahya, M. Y. (2013). “Polyaniline coated kenaf core and its effect on the mechanical and electrical properties of epoxy resin,” Composite Interfaces 20(8), 611-622.
15. Rimbu, G. A., Stamatin, I., Jackson, C. L., and Scott, K. (2006). “The morphology control of polyaniline as conducting polymer in fuel cell technology,” J. Optoelectron. Adv. Mater. 8(2), 670-674.
16. Saini, P., and Arora, M. (2013). “Formation mechanism, electronic properties & microwave shielding by nano-structured polyanilines prepared by template free route using surfactant dopants” J. Mater. Chem. A 1, 8926-8934.
17. Salmén, L. (1994). “Viscoelastic properties of in situ lignin under water-saturated conditions,” J. Mater. Sci. 19(9), 3090-3096.
18. Salmén, L., Olsson, A. M., and Wennerblom, M. (1996). “The effect of lignin composition on the viscoelasticity properties of wood,” Nord. Pulp Pap. Res. J. 4(1), 279-280.
19. Sirvio, J., and Karenlampi, P. (1998). “Pits as natural irregularities in softwood fibers,” Wood Fiber Sci. 30(1), 27-39.
20. Treu, A., Bardage, S. Johansson, M., and Trey, S. (2014). “Fungal durability of polyaniline modified wood and the impact of a low pulsed electric field,” Int. Biodeter. Biodegr. 87, 26-33.
21. Trey, S., Jafarzadeh, S., and Johansson, M. (2012). “In situ polymerization of polyaniline in wood veneers,” ACS Appl. Mater. Interfaces 4(3), 1760-1769.
22. nd Ed., Vol. 1, Academic Press, Brooklyn, NY.
23. Wang, J., Zhang, and K. Zhao, L. (2014). “Sono-assisted synthesis of nanostructured polyaniline for adsorption of aqueous Cr(Vi): Effect of protonic acids,” Chem. Eng. J. 239, 123-131.
24. Wolszczak, M., Kroh, J., and Abdel-Hamid, M. M. (1995). “Some aspects of the radiation processing of conducting polymers,” Radiat. Phys. Chem. 45(1), 71-78.