Landing gear integration in aircraft conceptual design

6th Symposium on Multidisciplinary Analysis and Optimization

Volumn , Issue , 1996, Pages 525-540

  Chai, Sonny ^a   Mason, William H ^b  

^a State University   (United States)

^b VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONCEPTUAL DESIGN; FLOTATION; INTEGRATION; TRANSPORT AIRCRAFT;

AIRCRAFT CONCEPTUAL DESIGNS; AIRCRAFT DESIGN; CAPABLE DESIGN; DESIGN AND INTEGRATIONS; DESIGN ISSUES; DESIGN PROCESS; DISCIPLINARY ANALYSIS;

LANDING GEAR (AIRCRAFT);

EID: 84982318552     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.1996-4038     Document Type: Conference Paper

References (41)

1. Conway, H. G., Landing Gear Design, Chapman & Hall, London, 1958.
2. Currey, N. S., Aircraft Landing Gear Design: Principles and Practices, AIAA Education Series, Washington, 1988.
3. Jayaram, S., Myklebust, A., and Gelhausen, P., “ACSYNT-A Standards-Based System for Parametric Computer Aided Conceptual De sign of Aircraft,” AIAA Paper 92-1268, February 1992.
4. Chai, S., and Mason, W.H., “Landing Gear Integration and Design Studies for Aircraft Conceptual Design,” MAD Center Report 96-08-01, Virginia Tech, Blacksburg, VA, August, 1996, also: http://w w w. aoe. vt.edu/mad/reports
5. Torenbeek, E., Synthesis of Subsonic Airplane Design, Delft University Press, The Netherlands, 1982, pp. 341-363.
6. Fiornio, F., Comp., “Too Big For Your Britches,” Aviation Week and Space Technology, Vol. 144, No. 21, May 20, 1996, p. 19.
7. Horonjeff, R. and McKelvey, F. X., Planning and Design of Airports, McGraw-Hill, New York, 1994, pp. 288-324.
8. Shifrin, C. A., “New Jumbos, SSTs Face Tough Hurdles,” Aviation Week and Space Technology, Vol. 141, No. 21, November 21, 1994, pp. 42-43.
9. Niu, M. C. Y., Airframe Structural Design, Conmilit Press, Hong Kong, 1988, pp. 430-470.
10. Liebeck, R. H., Page, M. A., Rawdon, B. K., Scott, P. W., and Wright, R. A., “Concepts for Advanced Subsonic Transports,” NASA CR- 4624, September 1994.
11. Veaux, J., “New Design Procedures Applied to Landing Gear Development,” Journal of Aircraft, Vol. 25, No. 10, October 1988, pp. 904-910.
12. MacMillin, P. E., Golividov, O., Mason, W.H., Grossman, B., and Haftka, R.T., “Trim, Control, and Performance Effects in Variable- Complexity High-Speed Civil Transport Design,” MAD Center Report 96-07-01, July 1996. Virginia Tech, Blacksburg, VA: http://www.aoe.vt.edu/mad/reports
13. Anderson, M.R., and Mason, W.H., “An MDO Approach to Control-Configured-Vehicle Design,” AIAA Paper 96-4058, Sept. 1996.
14. Holloway, R. B., Burris, P. M. and Johannes, R. P., “Aircraft Performance Benefits from Modern Control Systems Technology,” Journal of Aircraft, Vol. 7, No. 6, November 1970, pp. 550-553.
15. Sliwa, S. M., “Economic Evaluation of Flying- Qualities Design Criteria for a Transport Configured With Relaxed Static Stability,” NASA Technical Paper 1760, December 1980.
16. Chai, S., Crisafuli, P., and Mason, W. H., “Aircraft Center of Gravity Estimation in Conceptual Design,” AIAA Paper 95-3882, September 1995.
17. Lambert, M., Ed., Jane’s All the World’s Aircraft, Sentinel House, United Kingdom, 1994.
18. Green, W., Swanborough, G., and Mowinski, J., Modern Commercial Aircraft, Portland House, New York, 1978.
19. Anon., Aircraft Type Certification Data Sheets and Specification, Vol. 3: Large Multiengine Aircraft, Department of Transportation, Federal Aviation Administration, Washington, DC, 1985.
20. Davis, E., “Center of Gravity Envelope Development, 747-400F”, SAWE Paper 2220, May 1994.
21. Eilon, S., and Christofides, N., “The Loading Problem,” Management Science, Vol. 17, No, 5, Jan. 1971, pp. 259-268
22. Amiouny, S.V., Bartholdi, J.J. III, Vande Vate, J.H., and Zhang, J. “Balanced Loading," Operations Research, Vol. 40, No. 2, March-April 1992, pp.238-246.
23. Martin-Vega, L.A., “Aircraft Load Planning and the Computer: Description and Review,” Computers and Industrial Engineering, Vol. 9, No. 4, pp.357-369, 1985.
24. Greenbank, S. J., “Landing Gear: The Aircraft Requirement,” Institution of Mechanical Engineers, Proceedings, Part G, Journal of Aerospace Engineering, Vol. 205, 1991, pp. 27-34.
25. Roskam, J., Airplane Design, Roskam Aviation and Engineering, Ottawa, Kansas, 1986
26. Anon., Airplane Characteristics for Airport Planning, 737-300, 737-400, 737-500, Boeing Document D6-58325-2, Boeing Commercial Airplanes, Seattle, Washington, September 1988.
27. Anon., Tire Data Sheets, Goodyear, December, 1978.
28. Anon., 1994 Aircraft Yearbook, The Tire and Rim Association, Inc., 1994.
29. Kraus, P. R., “An Analytical Approach to Landing Gear Weight Estimation,” SAWE Paper 829, May 1970.
30. Wille, R. H., “Analytical Weight Estimation of Unconventional Landing Gear Design,” SAWE Paper 1905, May 1989.
31. Anon., “Aerospace Landing Gear Systems Terminology,” Society of Automotive Engineers, AIR 1489, April 1977.
32. Westergaard, H. M., “New formulas for Stresses in Concrete Pavements of Airfields,” Transactions of American Society of Civil Engineers, Vol. 73, May 1947.
33. McCullers, L. A., “Aircraft Configuration Optimization Including Optimized Flight Profiles”, Proceedings of Symposium on Recent Experiences in Multidisciplinary Analysis and Optimization, 1984, pp. 395-412 (NASA CP- 2327).
34. Proctor, P., “Boeing Homes In on Future 747 Design,” Aviation Week and Space Technology, Vol. 144, No. 6, February 5, 1996, pp. 32-33.
35. Sparaco, P., “No Money As Yet In Airbus Jumbo Plan,” Aviation Week and Space Technology, Vol. 144, No. 25, June 17, 1996, pp. 27-28.
36. Arcara, Jr., P. C., Bartlett, D. W., McGraw, Jr., M. E., and Geiselhart, K. A., “Technology Benefits for Very Large Subsonic Transports,” AIAA Paper 93-1178, February 1993.
37. Proctor, P., “Boeing Refines Designs for 600- seat NLA,” Aviation Week and Space Technology, Vol. 141, No. 21, November 21, 1994, pp. 48-49.
38. Sparaco, P., “Airbus Weighs Four A3XX Versions,” Aviation Week and Space Technology, Vol. 141, No. 21, November 21, 1994, p. 54.
39. Smith, B. A., “Douglas Awaits Chance to Revive Jumbo Plans,” Aviation Week and Space Technology, Vol. 141, No. 21, November 21, 1994, p. 57.
40. Lambert, M., Ed., Jane's All The World's Aircraft, Sentinel House, United Kingdom, 1996.
41. Fiornio, F., Comp., “Too Big For Your Britches,” Aviation Week and Space Technology., Vol. 144, No. 21, May 20, 1996, p. 19