On the nature of joint strength of paper - Effect of dry strength agents - Revisiting the Page equation

Nordic Pulp and Paper Research Journal

Volumn 31, Issue 3, 2016, Pages 459-468

  Lindström, Tom ^a   Fellers, Christer ^b   Ankerfors, Mikael ^c   Glad Nordmark, Gunborg ^a  

^a INNVENTIA AB   (Sweden)

^b BillerudKorsnäs AB ^*  (Sweden)

^c Verso Corporation   (Sweden)

Author keywords

BET surface area; Carboxymethyl cellulose; Cationic starch; Fibre fibre bonding; Interlaminar shear strength; Ionic groups; Joint strength; Microfibrillar cellulose; Nanofibrillar cellulose; Nanofibrils; Page equation; Z strength

Indexed keywords

ADDITIVES; ADHESIVES; CELLULOSE; CHEMICAL BONDS; FIBERS; IONIC STRENGTH; KRAFT PULP; PULP REFINING; REINFORCEMENT; SHEAR STRENGTH; STARCH; WOOD; BONDING;

BET SURFACE AREA; CARBOXY-METHYL CELLULOSE; CATIONIC STARCHES; INTER-LAMINAR SHEAR STRENGTHS; IONIC GROUP; JOINT STRENGTH; MICROFIBRILLAR CELLULOSE; NANO-FIBRILS; NANOFIBRILLAR CELLULOSE; PAGE EQUATION; Z-STRENGTH; Z-STRENETH;

TENSILE STRENGTH;

CARBOXYMETHYL CELLULOSE; CHEMICAL TREATMENT; PAPER PROPERTIES; REFINING; SHEAR STRENGTH; TENSILE STRENGTH; ADDITIVES; ADHESIVES; BONDING; CELLULOSE; CHEMICAL BONDS; FIBERS; IONIC STRENGTH;

EID: 84982145803     PISSN: 02832631     EISSN: 20000669     Source Type: Journal    
DOI: 10.3183/npprj-2016-31-03-p459-468     Document Type: Article

References (51)

1. Batchelor, W. J., Oullet, D. and Kure, K. A. (1996): Refining and development of fiber properties, TAPPI Papermakers Conference: 207-214.
2. Carlsson, L. and Lindström, T. (2005): A shear-lag approach to tensile strength of paper. Compos. Sci. Technol. 65(2), 183-189.
3. Clark, J. d. A. (1973): Components of the strength qualities of pulps. Tappi 56(7), 122-125.
4. Dasgupta, S. (1994): Mechanism of paper tensile strength of paper. Tappi J. 77(6), 158-166.
5. Dubois, M., Gilles, K. A., Hamilton, J. K., Rebers, P. A. and Smith, F. (1956): Colorimetric method fpor determination of sugars and related substances. Anal. Chem. 28(3), 350-356.
6. Duker, E. and Lindström, T. (2008): On the mechanisms behind the ability of CMC to enhance paper strength. Nord. Pulp Paper Res. J. 23(1), 57-64.
7. Eklund, D. and Lindström, T. (1991): Dry Strength, Chapter III. In: Paper Chemistry-An Introduction(ed.), DT Paper Science, Grankulla, Finland.
8. El-Hosseiny, F. and Abson, D. (1983): A critical examination of theories of paper strength. Paper Technology and Industry 24(6), 209-213.
9. Fellers, C. (1977): Procedure for measuring the interlaminar shear properties of paper. Svensk Papperstidning 80(3), 89-93.
10. Gaspar, L. A. (1982): Intrinsic bonding of cationic starch and applications of cationic starch with recycled fiber, TAPPI 1982 Annual Meetings Proceedings: 89-93.
11. Gimåker, M., Östlund, M., Östlund, S. and Wågberg, L. (2011): Influence of beating and chemical additives on residual stresses in paper. Nord. Pulp Paper Res. J. 26(4), 445-451.
12. Girlanda, O. and Fellers, C. (2007): Evaluation of the tensile stress-strain properties in the thickness direction of paper materials. Nord. Pulp Paper Res. J. 22(1), 49-56.
13. Görres, J., Amiri, R., Wood, J. R. and Karnis, A. (1995): The shear bond strength of mechanical pulps. J. Appl. Sci. 25(12), 2829-2843.
14. Görres, J. and Luner, P. (1992): An apparent density model of paper. J. Pulp Paper Sci. 18(4), J127-J130.
15. Görres, J., Sinclair, C. S. and Tallentire, A. (1989): An interactive multi-planar model of paper structure. Paperi Puu 71(1), 54-59.
16. Haselton, W. R. (1955): Gas adsorption by wood, pulp and paper. II. The application of gas adsorption techniques to the study of the bonded area and structure of pulps and the unbonded and bonded area of paper. Tappi 38(12), 716-723.
17. He, J., Batchelor, W. J. and Johnstone, R. E. (2007): An analytical model for number of fibre-fibre contacts in paper and expressions for relative bonded area (RBA). J. Mater. Sci. 42: 522-528.
18. Hirn, U., Schennnach, R., Ganser, C., Magnusson, M., Teichert, C. and Östlund, S. (2013): The area in molecular contact in fiber-fiber bonds. In: Advances in Pulp and Paper Reserach. Transactions of the 15th Fundamental Research Symposium held in Cambridge 2013, I'Anson, S. J.(ed.), 201-226.
19. Horvath, A. E., Lindström, T. and Laine, J. (2006): On the indirect polyelectrolyte titration of cellulosic fibres. Conditions for charge stoichiometry and comparison with ESCA. Langmuir 22(2), 824-830.
20. Howard, R. C. and Jowsey, C. J. (1989): The effect of cationic starch on the tensile strength of paper. J. Pulp Paper Sci. 15(6), J225-J229.
21. Ingmansson, W. I. and Thode, E. F. (1959): Factors contributing to the strength of a sheet of paper. II. Relative bonded area. Tappi 42(1), 83-93.
22. Jones, A. R. (1972): Strength evaluation of unbleached kraft pulps. Tappi 55(10), 1522-1527.
23. Kallmes, O., Corte, H. and Bernier, G. (1961): The structure of paper II.The statistical geometri of a multiplanar fibre network. Tappi 44(7), 519-528.
24. Katz, S., Beatson, R. P. and Scallan, A.-M. (1984): The determination of strong and weak acidic groups in sulfite pulps. Svensk Papperstidn. 87(6), R48.
25. Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. and Dorris, A. (2011): Nanocelluloses: A new family of nature-based materials. Angewandte Chemie, International Edition 50(24), 5438-5466.
26. Laine, J., Lindström, T., Glad Nordmark, G. and Risinger, G. (2000): Studies on topochemical modification of cellulosic fibres. Part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibres. Nord. Pulp Paper Res. J. 15(5), 520-526.
27. Leech, H. J. (1954): An investigation of the reasons for increase in paper strength when locust bean gum is used as a beater adhesive. Tappi 37(8), 343-349.
28. Lindström , T., Kolseth, P. and Näslund, P. (1985): The dry strengthening effect of cationic starch wet end addition on filled papers. Symposium on "Papermaking Raw Materials". Trans. of the 8th Fund. Res. Symp., Oxford, UK, Punton, V.(ed.), Mechanical Engineering Publications Ltd: 589-611.
29. Lindström, T., Wågberg, L. and Larsson, T. (2005): On the joint strength in paper-A review of dry and wet strength resins in papermaking. "Advances in Paper Science and Technology" Trans. of the 13th Fundamental Res. Symp. held in Cambridge. Sept 2005, Cambridge pp. 457-562.
30. Lyne, L. M. and Gallay, W. (1954): Studies in the fundamentals of wet-web strength. Pulp Paper Mag. Can. (October), 128-138.
31. Mäkelä, P. (2009): Effect of drying conditions on the tensile properties of paper. In Advances in Pulp and Paper Science Research, Transactions of the 14th Fundamental Research Symposium held in Oxford UK I'Anson, S. J.(ed.), FRC Manchester: 1079-1094.
32. Marton, J. (1991): Dry strength additives. In: Paper Chemistry, Roberts, J. C. (ed.), Chapman and Hall, NY, USA.
33. Nanko, H. and Ohsawa, J. (1989): Mechanism of fibre bond formation. Transactions of the 9th Fundamental Research Symposium held in Cambridge, Baker, C. F. P. a. W. E.(ed.), Mechanical Engineering Publications Ltd. London, UK: 783-830.
34. Nygårds, M., Fellers, C. and Östlund, S. (2009): Development of the notched shear test. Symposium on "Advances in Pulp and Paper Research" Transaction of the 14th Fundamental Research Symposium. Vol. 2. l'Anson, S.J. (Ed.), Oxford, UK: 877-897, The Pulp & Paper Fundamental Research Society.
35. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O. and Lindström, T. (2007): Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8(6), 1934-1941.
36. Page, D. H. (1969): A theory for the tensile strength of paper. Tappi 52(4), 674-681.
37. Page, D. H., Seth, R. S., Jordan, D. D. and Barbe, M. C. (1985): Curl, crimps, kinks and microcompressions in pulp fibres-their origin, measurements and significance. Papermaking Raw Materials. Trans. VIIIth Fund. Res. Symp., Oxford, Punton, V.(ed.): 183-227.
38. Pavilainen, L. (1990): Importance of particle size-fibre length and fines for the charcterization of softwood kraft pulp. Paperi Puu 72(5), 516-526.
39. Pavilainen, L. (1994): Bonding potential of softwood sulphate fibres. Paperi Puu 76(3), 162-172.
40. Reynolds, W. F. (1980): Dry strength Additives. Tappi Press, Atlanta, GA, USA.
41. Robinson, J. V. (1980): Fiber Bonding, Chapter 7. In: Pulp & Paper Chemistry and Chemical Technology, 3rd Ed., Casey, J. P. (ed.), Wiley-Interscience, New York, USA, New York: 915-963.
42. Seth, R. S. (1990): Fibre quality factors in papermaking-The importance of fibre length and strength, MRS Symposium Proceedings, pp. 125-140.
43. Seth, R. S. and Page, D. H. (1996): The problem of using Page's eqution to determine loss in shear strength of fiber-fiber bonds upon pulp drying. Tappi J. 79(9), 206-210.
44. Stratton, R. A. (1991a): Characterization of fiber-fiber bond strength from paper mechanical properties, International Paper Physics Conference: 561-577.
45. Stratton, R. A. (1991b): Characterization of fiber-fiber bond strength from paper mechanical properties. International Paper Physics Conference Proceedings, Tappi Press, Atlanta, GA, USA: 561-577.
46. Swanson, J. W. (1956): Beater adhesives and fiber bonding-The need for further research. Tappi 39(5), 257-270.
47. Swanson, J. W. (1961): The science of chemical additives in papermaking. Tappi 44(1), 142A-173A.
48. Thode, E. F. and Ingmansson, W. L. (1959): External specific surface and swollen specific volume. Tappi 42(1), 74-83.
49. Uesaka, T. (1984): Handbook of Physical and Mechanical Testing of Paper and Paperboard. In, (ed), R. E. M. (ed.), Marcel Dekker, New York: 379-402.
50. von Byrd, L. (1989): Interlaminar shear: its relation with edgewise compression and other paper properties. Tappi J. 73(3), 153-156.
51. Wågberg, L., Winter, L. and Lindström, T. (1985): Determination of ion-exchanged capacity of carboxymethylated cellulose fibers using colloidal and conductrometric titrations. Symposium on "Papermaking Raw Materials", Transactions of the 8th Fundamental Research Symposium. Vol. 2., Oxford, UK, Punton, V.(ed.), Mechanical Engineering Publications Ltd.: 917-923.