The mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites

International Journal of Precision Engineering and Manufacturing

Volumn 17, Issue 8, 2016, Pages 1001-1008

  Rashid, Bushra ^a,b   Leman, Zulkiflle ^a   Jawaid, Mohammad ^a   Ghazali, Mariyam Jameelah ^c   Ishak, Mohamad Ridzwan ^a  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

^b MIDDLE TECHNICAL UNIVERSITY   (Iraq)

^c UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

Author keywords

Composites; Compressive; Flexural; Impact; Phenolic resin; Sugar palm fibres

Indexed keywords

COMPOSITE MATERIALS; FIBER BONDING; FIBERS; IMPACT STRENGTH; PARTICLE SIZE; PHENOLIC RESINS; SCANNING ELECTRON MICROSCOPY; SEAWATER; WATER TREATMENT;

COMPRESSIVE; FLEXURAL; HOT-PRESS TECHNIQUES; IMPACT; INTERFACIAL BONDING; MECHANICAL PERFORMANCE; PHENOLIC COMPOSITES; POTENTIAL RESOURCES;

REINFORCEMENT;

EID: 84980390252     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-016-0122-9     Document Type: Article

References (31)

1. Sapuan, S. M., “Concurrent Engineering in Natural Fibre Composite Product Development,” Applied Mechanics and Materials, Vol. 761, pp. 59–62, 2015.
2. Ahn, S.-H., “An Evaluation of Green Manufacturing Technologies based on Research Databases,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 1, pp. 5–9, 2014.
3. Shalwan, A. and Yousif, B. F., “Influence of Date Palm Fibre and Graphite Filler on Mechanical and Wear Characteristics of Epoxy Composites,” Materials & Design, Vol. 59, pp. 264–273, 2014.
4. Reddy, N. and Yang, Y., “Biocomposites using Lignocellulosic Agricultural Residues as Reinforcement,” in: Innovative Biofibers from Renewable Resources, Reddy, N., Yang, Y., (Eds.), Springer, pp. 391–417, 2015.
5. Dornfeld, D. A., “Moving Towards Green and Sustainable Manufacturing,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 1, pp. 63–66, 2014.
6. Gohil, P. P., Chaudhary, V., and Shaikh, A. A., “Natural Fiber-Reinforced Composites: Potential, Applications, And Properties,” in: Agricultural Biomass based Potential Materials, Hakeem, K. R., Jawaid, M., Alothman, O. Y., (Eds.), Springer, pp. 51–72, 2015.
7. Al-Oqla, F. M., Salit, M. S., Ishak, M. R., and Aziz, N. A., “Selecting Natural Fibers for Bio-based Materials with Conflicting Criteria,” American Journal of Applied Sciences, Vol. 12, No. 1, pp. 64–71, 2015.
8. Ishak, M. R., Sapuan, S. M., Leman, Z., Rahman, M., and Anwar, U., “Characterization of Sugar Palm (Arenga Pinnata) Fibres,” Journal of Thermal Analysis and Calorimetry, Vol. 109, No. 2, pp. 981–989, 2012.
9. Leman, Z., Sapuan, S. M., Azwan, M., Ahmad, M. M. H. M., and Maleque, M., “The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber-Reinforced Epoxy Composites,” Polymer-Plastics Technology and Engineering, Vol. 47, No. 6, pp. 606–612, 2008.
10. Sapuan, S. M., Bachtiar, D., and Hamdan, M. M., “Flexural Properties of Alkaline Treated Sugar Palm Fibre Reinforced Epoxy Composites,” International Journal of Automotive and Mechanical Engineering, Vol. 1, pp. 79–90, 2010.
11. Leman, Z., Sapuan, S. M., and Suppiah, S., “Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterization by Pull-Out Test,” Key Engineering Materials, Vols. 471-472, pp. 1034-10392011.
12. Ishak, M. R., Leman, Z., Salit, M. S., Rahman, M. Z. A., Uyup, M. K. A., and Akhtar, R., “IFSS, TG, FT-IR Spectra of Impregnated Sugar Palm (Arenga Pinnata) Fibres and Mechanical Properties of their Composites,” Journal of Thermal Analysis and Calorimetry, Vol. 111, No. 2, pp. 1375–1383, 2013.
13. Sapuan, S. M., Lok, H. Y., Ishak, M. R., and Misri, S., “Mechanical Properties of Hybrid Glass/Sugar Palm Fibre Reinforced Unsaturated Polyester Composites,” Chinese Journal of Polymer Science, Vol. 31, No. 10, pp. 1394–1403, 2013.
14. Leman, Z., Sastra, H., Sapuan, S., Hamdan, M., and Maleque, M., “Study on Impact Properties of Arenga Pinnata Fibre Reinforced Epoxy Composites,” Jurnal Teknologi Terpakai, Vol. 3, No. 1, pp. 14–19, 2005.
15. Bachtiar, D., Sapuan, S. M., and Hamdan, M., “The Influence of Alkaline Surface Fibre Treatment on the Impact Properties of Sugar Palm Fibre-Reinforced Epoxy Composites,” Polymer-Plastics Technology and Engineering, Vol. 48, No. 4, pp. 379–383, 2009.
16. Sahari, J., Sapuan, S., Ismarrubie, Z., and Rahman, M., “Investigation on Bending Strength and Stiffness of Sugar Palm Fibre from Different Parts Reinforced Unsaturated Polyester Composites,” Key Engineering Materials, Vols. 471-472, pp. 502–506, 2011.
17. Sahari, J., Sapuan, S. M., Ismarrubie, Z., and Rahman, M., “Tensile and Impact Properties of Different Morphological Parts of Sugar Palm Fibre-Reinforced Unsaturated Polyester Composites,” Polymers & Polymer Composites, Vol. 20, No. 9, pp. 861–866, 2012.
18. Sahari, J., Sapuan, S. M., Zainudin, E. S., and Maleque, M. A., “Mechanical and Thermal Properties of Environmentally Friendly Composites Derived from Sugar Palm Tree,” Materials & Design, Vol. 49, pp. 285–289, 2013.
19. Idris, U. D., Aigbodion, V. S., Abubakar, I. J., and Nwoye, C. I., “Eco-Friendly Asbestos Free Brake-Pad: Using Banana Peels,” Journal of King Saud University-Engineering Sciences, Vol. 27, No. 2, pp 185–192, 2013.
20. Ishak, M. R., Leman, Z., Sapuan, S. M., Salleh, M. Y., and Misri, S., “The Effect of Sea Water Treatment on the Impact and Flexural Strength of Sugar Palm Fibre Reinforced Epoxy Composites,” International Journal of Mechanical and Materials Engineering, Vol. 4, No. 3, pp. 316–320, 2009.
21. Ishak, M. R., Sapuan, S. M., Leman, Z., Rahman, M. Z. A., Anwar, U., and Siregar, J., “Sugar Palm (Arenga Pinnata): Its Fibres, Polymers and Composites,” Carbohydrate Polymers, Vol. 91, No. 2, pp. 699–710, 2013.
22. Jawaid, M. and Khalil, H. A., “Cellulosic/Synthetic Fibre Reinforced Polymer Hybrid Composites: A Review,” Carbohydrate Polymers, Vol. 86, No. 1, pp. 1–18, 2011.
23. Nguong, C., Lee, S., and Sujan, D., “A Review on Natural Fibre Reinforced Polymer Composites,” Proceedings of World Academy of Science, Engineering and Technology, Vol. 73, pp. 1123–1190, 2013.
24. Ishak, M., Leman, Z., Sapuan, S. M., Rahman, M., and Anwar, U., “Impregnation Modification of Sugar Palm Fibres with Phenol Formaldehyde and Unsaturated Polyester,” Fibers and Polymers, Vol. 14, No. 2, pp. 250–257, 2013.
25. Aigbodion, V., Akadike, U., Hassan, S., Asuke, F., and Agunsoye, J., “Development of Asbestos-Free Brake Pad using Bagasse,” Tribology in Industry, Vol. 32, No. 1, pp. 12–17, 2010.
26. Abdul-Hussein, A. B., AL-Hassani, E. S., and Mohammed, R. A., “Effect of Nature Materials Powders on Mechanical and Physical Properties of Glass Fiber/Epoxy Composite,” Journal of Engineering and Technology, Vol. 33, No. 1, pp. 175–197, 2015.
27. Ruzaidi, C. M., Kamarudin, H., Shamsul, J. B., Al Bakri, A. M., and Alida, A., “Morphology and Wear Properties of Palm ASH and PCB Waste Brake Pad,” Proc. of International Conference on Asia Agriculture and Animal (ICAAA 2011), Vol. 13, pp. 145–149, 2011.
28. Bachtiar, D., Sapuan, S. M., Khalina, A., Zainudin, E., and Dahlan, K., “Flexural and Impact Properties of Chemically Treated Sugar Palm Fiber Reinforced High Impact Polystyrene Composites,” Fibers and Polymers, Vol. 13, No. 7, pp. 894–898, 2012.
29. Sahari, J., Sapuan, S. M., Zainudin, E. S., and Maleque, M. A., “Flexural and Impact Properties of Biopolymer Derived from Sugar Palm Tree,” Advanced Materials Research, Vol. 701, pp. 225–228, 2013.
30. Yahaya, R., Sapuan, S. M., Jawaid, M., Leman, Z., and Zainudin, E. S., “Mechanical Performance of Woven Kenaf-Kevlar Hybrid Composites,” Journal of Reinforced Plastics and Composites, Vol. 33, No. 24, pp. 2242–2254, 2014.
31. Ademoh, N. A. and Olabisi, A. I., “Development and Evaluation of Maize Husks (Asbestos-Free) Based Brake Pad,” Industrial Engineering Letters, Vol. 5, No. 2, pp. 67–80, 2015.