Self-healing metals

Advances in Polymer Science

Volumn 273, Issue , 2016, Pages 387-408

  Grabowski, Blazej ^a   Tasan, C Cem ^a  

^a MAX PLANCK INSTITUT FÜR EISENFORSCHUNG GMBH   (Germany)

Author keywords

Crack closure; Nanoparticles; Phase transformation; Precipitation; Self healing metals; Shape memory alloys; Solder

Indexed keywords

EID: 84979057663     PISSN: 00653195     EISSN: None     Source Type: Book Series    
DOI: 10.1007/12_2015_337     Document Type: Chapter

References (59)

1. van der Zwaag S, van Dijk NH, Jonkers HM, Mookhoek SD, Sloof WG (2009) Self-healing behaviour in man-made engineering materials: bioinspired but taking into account their intrinsic character. Philos Trans A Math Phys Eng Sci 367:1689
2. Hager MD, Greil P, Leyens C, van der Zwaag S, Schubert US (2010) Self-healing materials. Adv Mater 22:5424
3. van der Zwaag S (2010) Routes and mechanisms towards self healing behaviour in engineering materials. Bull Pol Acad Sci Tech Sci 58:227
4. Kötteritzsch J, Schubert US, Hager MD (2013) Triggered and self-healing systems using nanostructured materials. Nanotechnol Rev 2:699
5. Drenchev L, Sobczak JJ (2014) Self-healing materials as biomimetic smart structures. Instytut Odlewnictwa, Kraków
6. Ferguson JB, Schultz BF, Rohatgi PK (2014) Self-healing metals and metal matrix composites. JOM 66:866
7. World Trade Organization (2014) International trade statistics. https://www.wto.org/english/ res_e/statis_e/its2014_e/its2014_e.pdf
8. Allwood JM, Cullen JM, Carruth MA, Cooper DR, McBrien M, Milford RL, Moynihan M, Patel ACH (2012) Sustainable materials: with both eyes open. UIT, Cambridge
9. Intergovernmental Panel on Climate Change (2007) Fourth assessment report. https://www.ipcc.ch/report/ar4/
10. van der Zwaag S (2007) Self-healing materials: an alternative approach to 20 centuries of materials science. Springer, Dordrecht
11. Manuel MV (2009) Principles of self-healing in metals and alloys: an introduction. In: Ghosh G (ed) Self-healing materials: fundamentals, design strategies, and applications. Wiley-VCH, Chichester
12. Shinya N, Kyono J, Laha K (2003) Improvement of creep rupture properties of heat resisting steels by the self-healing of creep cavities. Mater Sci Forum 426–432:1107
13. Laha K, Kyono J, Kishimoto S, Shinya N (2005) Beneficial effect of B segregation on creep cavitation in a type 347 austenitic stainless steel. Scr Mater 52:675
14. Shinya N, Kyono J, Laha K (2006) Self-healing effect of boron nitride precipitation on creep cavitation in austenitic stainless steel. J Intell Mater Syst Struct 17:1127
15. Laha K, Kyono J, Shinya N (2007) An advanced creep cavitation resistance Cu-containing 18Cr–12Ni–Nb austenitic stainless steel. Scr Mater 56:915
16. Laha K, Kyono J, Shinya N (2012) Copper, boron, and ceriumadditions in type 347 austenitic steel to improve creep rupture strength. Metall Mater Trans A 43:1187
17. He SM, van Dijk NH, Schut H, Peekstok ER, van der Zwaag S (2010) Thermally activated precipitation at deformation-induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy. Phys Rev B 81:094103
18. He SM, van Dijk NH, Paladugu M, Schut H, Kohlbrecher J, Tichelaar FD, van der Zwaag S (2010) In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering. Phys Rev B 82:174111
19. He SM, Brandhoff PN, Schut H, van der Zwaag S, van Dijk NH (2013) Positron annihilation study on repeated deformation/precipitation aging in Fe–Cu–B–N alloys. J Mater Sci 48:6150
20. Zhang S, Kohlbrecher J, Tichelaar FD, Langelaan G, Brück E, van der Zwaag S, van Dijk NH (2013) Defect-induced Au precipitation in Fe–Au and Fe–Au–B–N alloys studied by in situ small-angle neutron scattering. Acta Mater 61:7009
21. S. Zhang (2015) Self healing of damage in Fe-based alloys. Ph.D. thesis, TU Delft
22. Karpov EG, Grankin MV, Liu M, Ariyan M (2012) Characterization of precipitative selfhealing materials by mechanokinetic modeling approach. J Mech Phys Solids 60:250
23. Shinya N (2009) Self-healing of metallic materials: self-healing of creep cavity and fatigue cavity/crack. In: Ghosh G (ed) Self-healing materials: fundamentals, design strategies, and applications. Wiley-VCH, Chichester
24. Lumley RN, Morton AJ, Polmear IJ (2002) Enhanced creep performance in an Al–Cu–Mg–Ag alloy through underageing. Acta Mater 50:3597
25. Lumley RN, Polmear IJ, Morton AJ (2003) Interrupted aging and secondary precipitation in aluminium alloys. Mater Sci Technol 19:1483
26. Lumley RN, O’Donnell RG, Polmear IJ, Griffiths JR (2005) Enhanced fatigue resistance by underageing an Al-Cu-Mg-Ag alloy. Mater Forum 29:256
27. Lumley RN, Polmear IJ (2007) Advances in self-healing of metals. In: Proceedings of the first international conference on self-healing materials, Noordwijk aan Zee, The Netherlands
28. Hautakangas S, Schut H, van der Zwaag S, Rivera Diazdel Castillo PEJ, van Dijk NH (2007) Self healing kinetics in an underaged AA2024 aluminium alloy. In: Proceedings of the first international conference on self-healing materials, Noordwijk aan Zee, The Netherlands
29. Hautakangas S, Schut H, van der Zwaag S, del Rivera Diaz Castillo PEJ, van Dijk NH (2007) Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys. physica status solidi C 4:3469
30. Hautakangas S, Schut H, van Dijk NH, del Rivera Díaz Castillo PEJ, van der Zwaag S (2008) Self-healing of deformation damage in underaged Al–Cu–Mg alloys. Scr Mater 58:719
31. Mahdavi Shahri M, Alderliesten RC, van der Zwaag S, Schut H(2014) Postponing crack nucleation in 2024 aluminium alloy by dynamic precipitation from the supersaturated state. Adv Mater Res 891–892:1577
32. Lumley RN (2007) Self healing in aluminium alloys. In: van der Zwaag S (ed) Self healing materials: an alternative approach to 20 centuries of materials science. Springer, Dordrecht
33. Wanhill R (2007) Fatigue crack initiation in aerospace aluminium alloys, components and structures. In: Proceedings of the first international conference on self-healing materials, Noordwijk aan Zee, The Netherlands
34. Ritchie RO (1999) Mechanisms of fatigue-crack propagation in ductile and brittle solids. Int J Fract 100:55
35. Vasudeven AK, Sadananda K, Louat N (1994) A review of crack closure, fatigue crack threshold and related phenomena. Mat Sci Eng A Struct 188:1
36. Mayer HR, Stanzl-Tschegg SE, Sawaki Y, Hühner M, Hornbogen E (2007) Influence of transformation-induced crack closure on slow fatigue crack growth under variable amplitude loading. Fatigue Fract Eng Mater Struct 18:935
37. James MN, Knott JF (1985) Critical aspects of the characterization of crack tip closure by compliance techniques. Mater Sci Eng 72:L1
38. Baxevanis T, Parrinello AF, Lagoudas DC (2013) On the fracture toughness enhancement due to stress-induced phase transformation in shape memory alloys. Int J Plasticity 50:158
39. Grabowski B, Tasan C (2014) Towards self-healing metals by employing optimally-dispersed Ti-Ni shape-memory nano-particles. Project within DFG SPP 1568: Design and generic principles of self-healing materials. DFG, Bonn
40. Xu GQ, Demkowicz MJ (2013) Healing of nanocracks by disclinations. Phys Rev Lett 111: 145501
41. Glensk A, Grabowski B, Hickel T, Neugebauer J (2015) Understanding anharmonicity in fcc materials: from its origin toab initioStrategies beyond the quasiharmonic approximation. Phys Rev Lett 114:195901
42. Grabowski B, Wippermann S, Glensk A, Hickel T, Neugebauer J (2015) Random phase approximation up to the melting point: impact of anharmonicity and nonlocal many-body effects on the thermodynamics of Au. Phys Rev B 91:201103
43. Duff AI, Davey T, Korbmacher D, Glensk A, Grabowski B, Neugebauer J, Finnis MW (2015) Improved method of calculating ab initio high-temperature thermodynamic properties with application to ZrC. Phys Rev B 91:214311
44. Files BS (1997) Design of a biomimetic self-healing superalloy composite. Ph.D. thesis, Northwestern University, Chicago
45. Manuel MV (2007) Design of a biomimetic self -healing alloy composite. Ph.D. thesis, Northwestern University, Chicago
46. Manuel MV, Olson GB (2007) Biomimetic self-healing metals. In: Proceedings of the first international conference on self-healing materials, Noordwijk aan Zee, The Netherlands
47. Fisher CR, Manuel MV (2011) Design considerations for matrix compostions of self-healing metal-matrix composites. In: Proceedings of the third international conference on self-healing materials, Bath, UK
48. Wright MC, Manuel MV, Wallace T (2013) Fatigue resistance of liquid-assisted self- repairing aluminum alloys reinforced with shape memory alloys. NASA/TM-2013-216629. National Aeronautics and Space Administration, Hampton
49. Rohatgi PK (2014) Al-shape memory alloy self-healing metal matrix composite. Mat Sci Eng A Struct 619:73
50. Ferguson JB, Schultz BF, Rohatgi PK (2015) Zinc alloy ZA-8/shape memory alloy selfhealing metal matrix composite. Mat Sci Eng A Struct 620:85
51. Kaufman L, Bernstein H (1970) Computer calculation of phase diagrams. Academic, New York
52. White SR, Sottos NR, Geubelle PH, Moore JS, Kessler MR, Sriram SR, Brown EN, Viswanathan S (2001) Autonomic healing of polymer composites. Nature 409:794
53. Lucci JM, Rohatgi PK, Schultz B (2008) Experiment and computational analysis of selfhealing in an aluminum alloy. In: Proceedings of the ASME international mechanical engineering congress and exposition, Boston, USA
54. Nosonovsky M, Amano R, Lucci JM, Rohatgi PK (2009) Physical chemistry of selforganization and self-healing in metals. Phys Chem Chem Phys 11:9530
55. Nosonovsky M, Rohatgi PK (2012) Biomimetics in materials science: self-healing, selflubricating, and self-cleaning materials. Springer, New York
56. Leser PE, Newman JA, Smith SW et al. (2014) Mitigation of crack damage in metallic materials. NASA/TM-2014-218272. National Aeronautics and Space Administration, Hampton
57. Abdolah Zadeh M, van der Zwaag Z, Garcia SJ (2015) Self-healing coatings. Adv Polym Sci. doi:10.1007/12_2015_339
58. Zheng XG, Shi YN, Lu K (2013) Electro-healing cracks in nickel. Mat Sci Eng A Struct 561:52
59. Zhou Y, Guo J, Gao M, He G (2004) Crack healing in a steel by using electropulsing technique. Mater Lett 58:1732