Strong and electrically conductive nanopaper from cellulose nanofibers and polypyrrole

Carbohydrate Polymers

Volumn 152, Issue , 2016, Pages 361-369

  Lay, Makara ^a,b   Méndez, J Alberto ^a   Delgado Aguilar, Marc ^a   Bun, Kim Ngun ^b   Vilaseca, Fabiola ^a  

^a UNIVERSITY OF GIRONA   (Spain)

^b INSTITUTE OF TECHNOLOGY OF CAMBODIA   (Cambodia)

Author keywords

Cellulose nanofibers; Conductive nanopaper; Electrical conductivity; Mechanical properties; Polypyrrole

Indexed keywords

CELLULOSE; ELECTRIC CONDUCTIVITY; MECHANICAL PROPERTIES; NANOFIBERS; POLYPYRROLES; TENSILE STRENGTH; THIN FILM TRANSISTORS;

BLEACHED SOFTWOOD PULPS; CELLULOSE NANOFIBERS; ELECTRICAL CONDUCTIVITY; ELECTRICALLY CONDUCTIVE; MECHANICAL PERFORMANCE; NANOPAPER; SITU CHEMICAL POLYMERIZATIONS; STRUCTURE AND MORPHOLOGY;

CONDUCTIVE MATERIALS;

CELLULOSE; NANOCOMPOSITE; NANOFIBER; POLYMER; POLYPYRROLE; PYRROLE DERIVATIVE;

CHEMISTRY; ELECTRIC CONDUCTIVITY; HARDNESS; PAPER; PINE; POLYMERIZATION; SHEAR STRENGTH; TENSILE STRENGTH; YOUNG MODULUS;

CELLULOSE; ELASTIC MODULUS; ELECTRIC CONDUCTIVITY; HARDNESS; NANOCOMPOSITES; NANOFIBERS; PAPER; PINUS; POLYMERIZATION; POLYMERS; PYRROLES; SHEAR STRENGTH; TENSILE STRENGTH;

EID: 84978204008     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2016.06.102     Document Type: Article

References (53)

1. Ali, F., Reinert, L., Levêque, J.-M., Duclaux, L., Muller, F., Saeed, S., Shah, S.S., Effect of sonication conditions: Solvent, time, temperature and reactor type on the preparation of micron sized vermiculite particles. Ultrasonics Sonochemistry 21:3 (2014), 1002–1009.
2. Ansari, R., Polypyrrole conducting electroactive polymers: Synthesis and stability studies. E-Journal of Chemistry 3:4 (2006), 186–201.
3. Beneventi, D., Alila, S., Boufi, S., Chaussy, D., Nortier, P., Polymerization of pyrrole on cellulose fibres using a FeCl3 impregnation- pyrrole polymerization sequence. Cellulose 13:6 (2006), 725–734.
4. Boufi, S., Kaddami, H., Dufresne, A., Mechanical performance and transparency of nanocellulose reinforced polymer nanocomposites. Macromolecular Materials and Engineering 299:5 (2014), 560–568.
5. Buitrago-Sierra, R., García-Fernández, M.J., Pastor-Blas, M.M., Sepúlveda-Escribano, A., Environmentally friendly reduction of a platinum catalyst precursor supported on polypyrrole. Green Chemistry 15:7 (2013), 1981–1990.
6. Carlsson, D.O., Nyström, G., Zhou, Q., Berglund, L.A., Nyholm, L., Strømme, M., Electroactive nanofibrillated cellulose aerogel composites with tunable structural and electrochemical properties. Journal of Materials Chemistry 22:36 (2012), 19014–19024.
7. Carlsson, D.O., Mihranyan, A., Strømme, M., Nyholm, L., Tailoring porosities and electrochemical properties of composites composed of microfibrillated cellulose and polypyrrole. RSC Advances 4:17 (2014), 8489–8497.
8. Eisazadeh, H., Engineering, C., Box, P.O., Studying the characteristics of polypyrrole and its composites. World Journal of Chemistry 2:2 (2007), 67–74.
9. Firoz Babu, K., Dhandapani, P., Maruthamuthu, S., Anbu Kulandainathan, M., One pot synthesis of polypyrrole silver nanocomposite on cotton fabrics for multifunctional property. Carbohydrate Polymers 90:4 (2012), 1557–1563.
10. Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., Isogai, A., Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10:1 (2009), 162–165.
11. Fukuzumi, H., Studies on structures and properties of TEMPO-oxidized cellulose nanofibril films. 2012, Japan, University of Tokyo.
12. González, I., Alcalà, M., Chinga-Carrasco, G., Vilaseca, F., Boufi, S., Mutjé, P., From paper to nanopaper: Evolution of mechanical and physical properties. Cellulose 21:4 (2014), 2599–2609.
13. Hamedi, M.M., Hajian, A., Fall, A.B., Hkansson, K., Salajkova, M., Lundell, F.,.. Berglund, L.A., Highly conducting, strong nanocomposites based on nanocellulose-assisted aqueous dispersions of single-wall carbon nanotubes. ACS Nano 8:3 (2014), 2467–2476.
14. Henriksson, M., Fogelström, L., Berglund, L.A., Johansson, M., Hult, A., Novel nanocomposite concept based on cross-linking of hyperbranched polymers in reactive cellulose nanopaper templates. Composites Science and Technology 71:1 (2011), 13–17.
15. Hoenich, N., Cellulose for medical applications: Past, present, and future. BioResources 1:2 (2006), 270–280.
16. Huang, B., Kang, G.J., Ni, Y., Preparation of conductive paper by in-situ polymerization of pyrrole in a pulp fibre system. Conductive Papers 2 (2006), 38–42.
17. Huang, J., Zhu, H., Chen, Y., Preston, C., Rohrbach, K., Cumings, J., Hu, L., Highly transparent and flexible nanopaper transistors. ACS Nano 7:3 (2013), 2106–2113.
18. Int, H.P.M., Dynamic mechanical analysis: A practical introduction. textbook. 2008, New york, CRC Press.
19. Ioelovich, M., Cellulose as a nanostructured polymer: A short review. BioResources 3:4 (2008), 1403–1418.
20. Isogai, A., Saito, T., Fukuzumi, H., TEMPO-oxidized cellulose nanofibers. Nanoscale 3:1 (2011), 71–85.
21. Jeon, G., Yang, S.Y., Kim, J.K., Functional nanoporous membranes for drug delivery. Journal of Materials Chemistry 22 (2012), 14814–14834.
22. Jonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., Davoodi, R., Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: A review. Cellulose 22:2 (2015), 935–969.
23. Kalia, S., Dufresne, A., Cherian, B.M., Kaith, B.S., Avérous, L., Njuguna, J., Nassiopoulos, E., Cellulose-based bio- and nanocomposites: A review. International Journal of Polymer Science 2011 (2011), 1–35.
24. Koga, H., Nogi, M., Komoda, N., Nge, T.T., Sugahara, T., Suganuma, K., Uniformly connected conductive networks on cellulose nanofiber paper for transparent paper electronics. NPG Asia Materials 6 (2014), 1–8.
25. Lavoine, N., Desloges, I., Dufresne, A., Bras, J., Microfibrillated cellulose—Its barrier properties and applications in cellulosic materials: A review. Carbohydrate Polymers 90:2 (2012), 735–764.
26. Lee, K.Y., Tammelin, T., Schulfter, K., Kiiskinen, H., Samela, J., Bismarck, A., High performance cellulose nanocomposites: Comparing the reinforcing ability of bacterial cellulose and nanofibrillated cellulose. ACS Applied Materials and Interfaces 4:8 (2012), 4078–4086.
27. Lin, N., Dufresne, A., Nanocellulose in biomedicine: Current status and future prospect. European Polymer Journal 59 (2014), 302–325.
28. Lin, Y., Cho, J., Tompsett, G.A., Westmoreland, P.R., Huber, G.W., Kinetics and mechanism of cellulose pyrolysis. Physical Chemistry 113:January (2009), 20097–20107.
29. Luo, Y., Zhang, J., Li, X., Liao, C., Li, X., The cellulose nanofibers for optoelectronic conversion and energy storage. Journal of Nanomaterials 2014 (2014), 1–13.
30. Miao, C., Hamad, W.Y., Cellulose reinforced polymer composites and nanocomposites: A critical review. Cellulose 20 (2013), 2221–2262.
31. Nyholm, L., Nyström, G., Mihranyan, A., Strømme, M., Toward flexible polymer and paper-based energy storage devices. Advanced Materials 23 (2011), 3751–3769.
32. Nyström, G., Mihranyan, A., Razaq, A., Lindström, T., Nyholm, L., Strømme, M., A nanocellulose polypyrrole composite based on microfibrillated cellulose from wood. The Journal of Physical Chemistry B 114:12 (2010), 4178–4182.
33. Nyström, G., Strømme, M., Sjödin, M., Nyholm, L., Rapid potential step charging of paper-based polypyrrole energy storage devices. Electrochimica Acta 70 (2012), 91–97.
34. Rastogi, V., Stanssens, D., Samyn, P., Mechanism for tuning the hydrophobicity of microfibrillated cellulose films by controlled thermal release of encapsulated wax. Materials 7:11 (2014), 7196–7216.
35. Saba, N., Tahir, P., Jawaid, M., A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polymers 6 (2014), 2247–2273.
36. Salas, C., Nypelö, T., Rodriguez-Abreu, C., Carrillo, C., Rojas, O.J., Nanocellulose properties and applications in colloids and interfaces. Current Opinion in Colloid and Interface Science 19:5 (2014), 383–396.
37. Sasso, C., Zeno, E., Petit-Conil, M., Chaussy, D., Belgacem, M.N., Tapin-Lingua, S., Beneventi, D., Highly conducting polypyrrole/cellulose nanocomposite films with enhanced mechanical properties. Macromolecular Materials and Engineering 295:10 (2010), 934–941.
38. Saville, P., Polypyrrole formation and use, Vol. 004, 2005, DRDC Atlantic TM, Canada.
39. Sehaqui, H., Liu, A., Zhou, Q., Berglund, L.A., Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromolecules 11:9 (2010), 2195–2198.
40. Sehaqui, H., Allais, M., Zhou, Q., Berglund, L.A., Wood cellulose biocomposites with fibrous structures at micro- and nanoscale. Composites Science and Technology 71:3 (2011), 382–387.
41. Siró, I., Plackett, D., Microfibrillated cellulose and new nanocomposite materials: A review. Cellulose 17:3 (2010), 459–494.
42. Snook, G.A., Kao, P., Best, A.S., Conducting-polymer-based supercapacitor devices and electrodes. Journal of Power Sources 196:1 (2011), 1–12.
43. Tammela, P., Wang, Z., Frykstrand, S., Zhang, P., Sintorn, I.-M., Nyholm, L., Strømme, M., Asymmetric supercapacitors based on carbon nanofibre and polypyrrole/nanocellulose composite electrodes. RSC Advance 5:21 (2015), 16405–16413.
44. Thakur, V.K., Nanocellulose polymer nanocomposites: fundamentals and applications. 2015, Wiley, MA.
45. Trchova, M., Kova, J., Synthesis and structural study of polypyrroles prepared in the presence of surfactants. Synthetic Metals 138 (2003), 447–455.
46. Wang, L.-X., Li, X.-G., Yang, Y.-L., Preparation, properties and applications of polypyrroles. Reactive and Functional Polymers 47 (2001), 125–139.
47. Wang, B., Sain, M., Oksman, K., Study of structural morphology of hemp fiber from the micro to the nanoscale. Applied Composite Materials 14:2 (2007), 89–103.
48. Wang, Z., Tammela, P., Zhang, P., Strømme, M., Nyholm, L., Efficient high active mass paper-based energy-storage devices containing free-standing additive-less polypyrrole–nanocellulose electrodes. Journal of Materials Chemistry A, 2(21), 2014, 7711.
49. Wang, Z., Carlsson, D.O., Tammela, P., Hua, K., Zhang, P., Nyholm, L., Strømme, M., Surface modified nanocellulose fibers yield conducting polymer-based flexible supercapacitors with enhanced capacitances. ACS Nano 9:7 (2015), 7563–7571.
50. Yuan, L., Yao, B., Hu, B., Huo, K., Chen, W., Zhou, J., Polypyrrole-coated paper for flexible solid-state energy storage. Energy & Environmental Science 6:2 (2013), 470–476.
51. Zhang, Y., Nypelö, T., Salas, C., Arboleda, J., Hoeger, I.C., Rojas, O.J., Cellulose nanofibrils: From strong materials to bioactive surfaces. Journal of Renewable Materials 1:3 (2013), 195–211.
52. Zhang, D., Zhang, Q., Gao, X., Piao, G., A nanocellulose polypyrrole composite based on tunicate cellulose. International Journal of Polymer Science, 2013, 2013 6 pp.
53. Zheng, G., Cui, Y., Karabulut, E., Wågberg, L., Zhu, H., Hu, L., Nanostructured paper for flexible energy and electronic devices. MRS Bulletin 38:04 (2013), 320–325.