White Water Recirculation Method as a Means to Evaluate the Influence of Fines on the Properties of Handsheets

BioResources

Volumn 10, Issue 4, 2015, Pages 7242-7251

  Tovar, Rafael Giner ^a,b   Fischer, Wolfgang J ^a,b   Eckhart, Rene ^a,b   Bauer, Wolfgang ^a,b  

^a GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

^b Flippr Future Lignin and Pulp Processing Research   (Austria)

Author keywords

Fines content; Fines retention; Handsheet forming; Paper properties; Primary fines; Secondary fines; White water circulation

Indexed keywords

WIRE;

FIBER MORPHOLOGY; FINES CONTENT; FLOW CELLS; HANDSHEET PROPERTIES; HANDSHEETS; PAPERMAKING INDUSTRY; WHITE WATER;

PETROLEUM RESERVOIR EVALUATION;

EVALUATION; FIBER STRUCTURE; FINES; MESH; PRODUCE; WHITE WATER; WIRE;

EID: 84977096763     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.10.4.7242-7251     Document Type: Article

References (26)

1. Bäckström, M., Kolar, M. C., and Htun, M. (2008). “Characterisation of fines from unbleached kraft pulps and their impact on sheet properties,” Holzforschung 62(5), 546–552. DOI: 10.1515/HF.2008.
2. Brecht, W., and Klemm, K. (1953). “The mixture of structures in a mechanical pulp as a key to the knowledge of its technological properties,” Pulp and Paper-Canada 54(1), 72–80.
3. Chen, J., Zhang, M., Yuan, Z., and Wang, J. (2013). “Improved high-yield pulp network and paper sheet properties by the addition of fines,” BioResources 8(4), 6309–6322. DOI: 10.15376/biores.8.4.6309-6322
4. DIN EN ISO 534 (2011). “Paper and board – Determination of thickness, density and specific volume,” Deutsches Institut für Normung, Berlin, Germany.
5. DIN EN ISO 1924-2 (2009). “Paper and board – Determination of tensile properties – Part 2: Constant rate of elongation method (20 mm/min),” Deutsches Institut für Normung, Berlin, Germany.
6. Htun, M., and de Ruvo, A. (1978). “The implication of the fines fraction for the properties of bleached kraft sheet,” Svensk Papperstidning 16, 507–510.
7. ISO 3688 (1999). “Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness),” International Organization for Standardization, Geneva, Switzerland.
8. ISO 5267-1 (1999). “Paper and board – Determination of drainability Part 1: Schopper Riegler method,” International Organization for Standardization, Geneva, Switzerland.
9. ISO 5636-3 (2013). “Paper and board – Determination of air permeance (medium range) Part 3: Bendtsen method,” International Organization for Standardization, Geneva, Switzerland.
10. Krogerus, B. and Fagerholm, K. (2002). “Fines from different pulps compared by image analysis,” Nordic Pulp and Paper Research Journal 17(4), 440–444. DOI 10.3183/NPPRJ-2002-17-04-p440-444
11. Lindqvist, H., Salminen, K., Kataja-aho, J., Retulainen, E., Fardim, P., and Sundberg, A. (2012). “The effect of fibre properties, fines content and surfactant addition on dewatering, wet and dry web properties,” Nordic Pulp and Paper Research Journal 27(1), 104–111.
12. Paavilainen, L. (1992). “The possibility of fractionating softwood sulfate pulp according to cell wall thickness,” Appita Journal 45(5), 319–326.
13. Peterson, D., Zhang, S., Qi, D., and Cameron, J. (2001). “An effective method to produce high quality fiber fines,” Progress in Paper Recycling 10(3), 18–24
14. Retulainen, E., Moss, P., and Nieminen, K. (1993). “Effect of fines on the properties of fibre networks,” 10th Fundamental Research Symposium,, Oxford, pp. 727–769.
15. Retulainen, E., Luukko, K., Fagerholm, K., Pere, J., Laine, J., and Paulapuro, H. (2002). “Papermaking quality of fines from different pulps - The effect of size, shape and chemical composition,” Appita Journal 55(6), 457–467.
16. SCAN-CM 66:05 (2005). “Fines content,” Scandinavian Pulp, Paper and Board test committee, Stockholm, Sweden
17. SCAN-CM 64:00 (2000). “Preparation of laboratory sheets for physical testing,” Scandinavian Pulp, Paper and Board test committee, Stockholm, Sweden.
18. Sehaqui, H., Liu, A., Zhou, Q., and Berglund, L. A. (2010). “Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures,” Biomacromolecules 11(9), 2195–2198. DOI: 10.1021/bm100490s
19. Seth, R. S. (2003). “The measurement and significance of fines,” Pulp and Paper-Canada 104(2), 41–44.
20. Sirviö, J., and Nurminen, I. (2004). “Systematic changes in paper properties caused by fines,” Pulp and Paper-Canada 105(8), 39–42.
21. nd Ed., pp. 59–92.
22. Sirviö, J., Nurminen, I., and Niskanen, K. (2003). “A method for assessing the consolidating effect of fines on the structure of paper,” International Paper Physics Conference Proceedings, pp. 187–192.
23. Sundberg, A., Pranovich, A., and Holmbom, B. (2003). “Chemical characterization of various types of mechanical pulp fines,” Journal of Pulp and Paper Science 29(5), 173–178.
24. Tao, L., Xuefeng, Y., Retulainen, E., and Nazhad, M. M. (2007). “Effect of chemical pulp fines on filler retention and paper properties,” Appita Journal 60(6), 469–473.
25. TAPPI Test Method T 261 Cm-94 (1994). “Fines fraction of paper stock by wet screening,” TAPPI Press, Atlanta, GA.
26. Xu, Y., and Pelton, R. (2005). “A new look at how fines influence the strength of filled papers,” Journal of Pulp and Paper Science 31(3), 147–152.