Computer-aided manufacturing of laminated engineering materials (CAM-LEM) and its application to the fabrication of ceramic components without tooling

Proceedings of the ASME Turbo Expo

Volumn 4, Issue , 1997, Pages

  Cawley, James D ^a  

^a Case Western Reserve University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; ALUMINA; CAMS; CERAMIC MATERIALS; COMPUTER AIDED MANUFACTURING; GASES; MANUFACTURE; PHILOSOPHICAL ASPECTS; SILICON CARBIDE; SILICON NITRIDE;

ADVANCED CERAMICS; CERAMIC COMPONENT; DESIGN PHILOSOPHY; ENABLING TECHNOLOGIES; ENGINEERING CERAMIC; ENGINEERING MATERIALS; GAS TURBINE APPLICATIONS; ITS APPLICATIONS;

GAS TURBINES;

EID: 84973626728     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/97-GT-534     Document Type: Conference Paper

References (31)

1. Agarwala, M. K., Bourell, D. L., and Beaman, J. J., "Densification of Selective Laser Sintered Metal Paris by Hot Isostatic Pressing", Proc. Solid Freeform Fabrication Symp., University of Texas at Austin, 1994, pp. 65-71.
2. Agarwala, M. K., van Weeren, R., Vaidyanathan, R., Bandyopadhyay, A., Carrasquillo. G., Jamalabad, V., Langrana, N., Safari, A., Garofalini, S. H., and Danforth, S. C., "Structural Ceramics by Fused Deposition of Ceramics", Proc. Solid Freeform Fabrication Symp., University of Texas at Austin, 1995, pp. 1-8
3. Anon., "Can We Get Serious About Ceramics? Before we can take advantage of these versatile materials, machining costs must be reduced", Man. Eng., 111 [2] 54 (1993).
4. Butler, N. D., Dawson, D. J., and Wordsworth, R. A., "Shaping Complex Components by Green Machining", Brit. Ceram. Proc., 4 5 53 (1990).
5. Cawley, J, D., Liu, Z., Newman, W. S., Mathewson, B. B., and Heuer, A. H., "Alumina Ceramics Made by CAM-LEM (Computer-Aided Manufacturing of Laminated Engineering Materials) Technology", Proc. Solid Freeform Fabrication Symp., University of Texas at Austin, 1995. pp. 9-16.
6. Cawley, J. D., Heuer. A. H., Newman, W. S., and Mathewson, B. B., "Computer-Aided Manufacturing of Laminated Engineering Materials." Bull. Am. Ceram. Soc., 75, [5] 75 (1996).
7. Cima, M. J., Yoo, J., Khanuja. S., Rynerson, M., Nammour, D., Giritlioglu, B., Grau, J., Sachs, E. M., "Structural Ceramic Components by 3D Printing", Proc. Solid Freeform Fabrication Symp., University of Texas at Austin. 1995, pp. 479-488.
8. Chiang, Y.-C., Wang, A. S. D., and Chou, T.-W., "On Matrix Cracking in Fiber Reinforced Ceramics", J. Mech. Phys. Solids, 41 [7] 1137 (1993)
9. Devendra, K., and Syers, G., "Application of Engineering Ceramics in Gas Turbines", p. 93 in Brit. Ceram. Proc. No. 46: Advanced Engineering with Ceramics. The Institute of Ceramics (1990).
10. Evans, A. G., "Perspective on the Development of High-Toughness Ceramics", J. Am. Ceram. Soc., 73 [2] 187 (1990).
11. Fedchenko, R. P., Jacobs, P. F., Chapter 1: Introduction. p. 1-26 in Stereolithography and Other RP&M Technologies: from Rapid Prototyping to Rapid Tooling, edited by Jacobs, P. F., ASME Press. Am. Soc. Mech. Eng, New York, 1996.
12. Griffith, M. L., and Halloran, J. W., "Ultraviolet Curing of Highly Loaded Ceramic Suspensions for Stereolithography of Ceramics." Proc. Solid Freeform Fabrication Symp., University of Texas at Austin. 1994. pp. 396-403.
13. Jacobs, P. F., "Stereolithography 1993: Epoxy Resins, Improved Accuracy and Investment Casting", Proc. 4th International Conference on Rapid Prototyping, University of Dayton. June 1993. pp. 249-262.
14. Keicher, D. M., Romero, J. A., Atwood, C. L., Smugeresky, J. G., Griffith, M. L., Jeantette, F. P., Harwell, L. and Greene, D, "Laser Engineered Net Shaping (LENS) for Additive Component Processing", Proc. Rapid Prototyping and Manufacturing'96, Soc. Manuf. Eng., Dearborn. MI. April. 1996.
15. Khandelwal. P., Majumdar. B. S., and Rosenfield, A. R., "Mixed-mode high temperature toughness of silicon nitride", J. Mat. Sci., 30 [2] 395 (1995).
16. Li, C.-W., and Yamanis, J., "Super-Tough Silicon Nitride with R-Curve Behavior." Ceram. Eng. Sci. Proc., 10 [7/8] 632 (1989).
17. Liu, Z. Z., Wei, P., Keman, B., Heuer, A. H., and Cawley, J. D. "Metal and Ceramic Components Made via CAM-LEM Technology", Proc. Solid Freeform Fabrication Symp., University of Texas at Austin. 1996. pp. 377-384.
18. Liu, Z. Z., and Noernberg, D., Unpublished Work, Case Western Reserve University.
19. Klosterman, D. A., Osborne, N. R. Martin, M., Mroz, T., and Pak, S., "Comprehensive Program for the Fabrication of Ceramic-Matrix Composites via Laminated Object Manufacturing", presented at 98th Annual Meeting American Ceramic Society, Indianapolis, IN, April 1996.
20. Mathewson, B. B., Newman, W. S., Heuer, A. H., and Cawley. J. D., "Automated Fabrication of Ceramic Components from Tape-Cast Ceramic", Proc. Solid Freeform Fabrication Symp., University of Texas at Austin, 1995. pp. 253-260.
21. Men, R., Prinz, F. B., Ramaswami, K., Terk, M., and Weiss. LE. "Shape Deposition Manufacturing." Proc. Solid Freeform Fabrication Symp., University of Texas at Austin, 1994. pp. 1-8.
22. Newman, W., Zheng, Y., and Fong, C.-C, "Trajectory Generation from CAD Models for Computer-Aided Manufacturing of Laminated Engineering Materials", Proc. 26th Int. Symp. on Industrial Robots, Inter. Fed. of Robotics, Singapore. 1995.
23. Newman. W. S., Mathewson. B. B., Zheng, Y., and Choi, S., "A Novel Selective-Area Gripper for Layed Assembly of Lminated Objects", Robotics & Computer-Integrated Manf., 12, [4]. 293 (1996).
24. Orme, M. E., Williams. K., and Courter, J., "The Development of Rapid Prototyping of Metallic Components via Ultra-Uniform Droplet Deposition", Proc. of the 5th International Conference on Rapid Prototyping, University of Dayton, June 1994, pp. 27-36.
25. Sachs, E., Cima, M. J., Comie, J., "Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model." CIRP Annals, 39. [1], 1990, pp. 210-214.
26. Sajgalik, P., Dusza, J., and Hoffman, M. J., "Relationship Between Microstructure, Toughening Mechanisms, and Fracture Toughenss of Reinforced Silicon Nitride Ceramics", J. Am. Ceram. Soc., 78 [10] 2619 (1995).
27. Sims, C. T., "A History of Superalloy Metallurgy for Superalloy Metallurgists", p. 399 in Superallovs 1984. edited by Gell. M., Kortovich, C. S., Bricknell, R. H., Kent, W. B., and Radavich, J. F., AIME, 1984.
28. Teeter, A. R., "Binders for Machinable Ceramics", Ceram. Age. 82 [8] 30 (1966).
29. Tosuchiga, T., Furuse, Y., Yoshino, S., Chikami, R., Tsukagoshi. K., and Mori, M. "Development of Air-Cooled Ceramic Nozzles for a Power Generating Gas Turbine", Am. Soc. Mech. Eng. Paper 5-GT-105. (1995).
30. Wei, P., M. S. Thesis, Case Western Reserve University, 1996.
31. Zheng, Y., Choi, S., Mathewson. B., and Newman, W., "Progress in Computer-Aided Manufacturing of Laminated Engineering Materials Utilizing Thick, Tangent-Cut Layers." Proc. Solid Freeform Fabrication Symp., University of Texas at Austin. 1996. pp. 355-362.