A bulk-flow analysis of multiple-pocket gas damper seals

Proceedings of the ASME Turbo Expo

Volumn 5, Issue , 1998, Pages

  Li, Jiming ^a   Andrés, Luis San ^a   Vance, John ^a  

^a Department of Electrical and Computer Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; DAMPING; FLOW RATE; GAS TURBINES; GASES; ROTORS; SHEAR FLOW; SHEAR STRESS;

BULK-FLOW ANALYSIS; CROSS-COUPLED STIFFNESS; DAMPING COEFFICIENTS; FIRST ORDER EQUATIONS; FORCE COEFFICIENTS; ROTOR DYNAMIC COEFFICIENTS; TURBULENT SHEAR STRESS; TWO-CONTROL-VOLUME;

SEALS;

EID: 84973141673     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/98-GT-013     Document Type: Conference Paper

References (20)

1. Alford J. S., 1965, "Protecting Turbomachinery From Self-Excited Rotor Whirl," ASME Journal of Engineering for Power, pp. 333-344.
2. Benckert, H., and J. Wachter, 1980, "Flow Induced Spring Coefficients of Labyrinth Seals For Application in Rotordynamics," NASA CP 2133, pp. 189-212.
3. Childs, D. W., 1993, "Turbomachinery Rotordynamics: Phenomena, Modeling, & Analysis," John Wiley & Sons, Inc., New York, pp. 300.
4. Childs, D. W., and Kleynhans, G., 1993, "Theory versus Experiment for Short (L/D=l/6) Honeycomb and Smooth Annular Pressure Seals," Proceedings of the 14th ASME Vibration and Noise Conference, September 19-22, Albuquerque, New Mexico, pp. 173-179.
5. Childs, D. W., and Vance, J. M., 1997, "Annular Seals And the Rotordynamics of Compressors and Turbines," Proceedings of the 26th Turbomachinery Symposium, September 14-18, Houston, Texas, pp. 201-220.
6. Childs, D. W., Elrod, D., and Hals, K., 1989, "Annular Honeycomb Seals: Test Results for Leakage and Rotordynamic Coefficients; Comparisons to Labyrinth and Smooth Configurations," ASME Journal ofTribology, Vol. 111, pp. 293-301.
7. Childs, D. W., Elrod, D., and Ramsey, C, 1990, "Annular Honeycomb Seals: Additional Test Results for Leakage and Rotordynamic Coefficients," Proceedings of the Third International Conference on Rotordynamics in IFToMM, Lyon, France, pp. 303-312.
8. Guo, Z., and D. Rhode, 1996."Assessment of Two- and Three-Dimensional k-s Models for Rotating Cavity Flows," ASME Journal of Turbomachinery, Vol. 118, pp. 826-834.
9. Kwanka, K. T., and Nagel, M., 1996, "Experimental Rotordynamic Coefficients of Short Labyrinth Gas Seals," NASA CP 3344, pp. 135-144.
10. Laundar, B. E., and Leschziner, M., 1978, "Flow in Finite-Width, Thrust Bearings Including Ihertial Effects, I - laminar Flow, II - Turbulent flaw" ASME Journal of Lubrication Technology, Vol. 100, pp. 330-345.
11. Li, J., 1995, "The Effect of A New Damper Seal on Rotordynamics," Master's Thesis, Texas A&M University, August.
12. Li, J., and Vance, J. M., 1995, "Effects of Clearance and Clearance Ratio on Two and Three Bladed TAMSEALs," TRC-Seal-4-95, Turbomachinery Laboratory Research Progress Report, Texas A&M University, College Station, April.
13. Li, J., San Andres, L., and Vance, J. M., 1997, "A Bulk-Flow Analysis of A Novel Gas Damper Seal," TL-Seal-2-97, Turbomachinery Laboratory Research Progress Report, Texas A&M University, College Station, May.
14. Millsaps, K.T., and M. Martinez, 1994, "Dynamic Forces From Single Gland Labyrinth Seals, Part I: Ideal and Viscous Decomposition," ASME Journal of Turbomachinery, Vol. 119, pp. 686-694.
15. Murphy, B. T., and Vance, J. M., 1980, "Labyrinth Seal Effects on Rotor Whirl Instability," Proceedings of the 2nd International Conference on Vibrations in Rotating Machinery (ImechE), #C306/80, pp. 369-373.
16. Patankar, S. V., 1980, Numerical Heat Transfer And Fluid Flow, Hemisphere Publishing Corporation, McGraw-Hill.
17. Ransom, D. L., 1997, "Identification of Dynamic Force Coefficients of a labyrinth and Gas Damper Seal Using Impact Load Excitations," Master's Thesis, Texas A&M University, December.
18. Richards, R. L., Vance, J. M., and Zeidan, F. Y., 1995, "Using A Damper Seal to Eliminate Subsynchronous Vibrations in Three Back-to-Back Compressors," Proceedings of 24fh Turbomachinery Symposium, Houston, September, pp. 59-71.
19. Scharrer, J. K., 1988, "Theory Versus Experiment for the Rotordynamic Coefficient of Labyrinth Gas Seals: Part I - A Two Control Volume Model", ASME Journal of Vibration, Acoustic, Stress, and Reliability in Design, Vol.110, pp. 270-280.
20. Van Doormaal, J. P., and Raithby, G. D., 1984, "Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows,"