Uncertainty in gas turbine NOx emission measurements

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 1998, Pages

  Hung, Wilfred S Y ^a   Campbell, Alan ^a  

^a SOLAR TURBINES INCORPORATED   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; ALTERNATIVE FUELS; COAL COMBUSTION; COMBUSTION; FUEL SYSTEMS; GAS EMISSIONS; GASES; INSTRUMENT ERRORS; INSTRUMENT TESTING; NITROGEN OXIDES; OIL WELL FLOODING; UNCERTAINTY ANALYSIS; WATER INJECTION;

CONTINUOUS EMISSION MONITORING; CONVENTIONAL COMBUSTIONS; EMISSIONS TESTING; GAS TURBINE APPLICATIONS; LOW-EMISSIONS COMBUSTION SYSTEMS; MEASUREMENT UNCERTAINTY; REGULATORY AGENCIES; STATE OF THE ART;

GAS TURBINES;

EID: 84971635749     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/98-GT-075     Document Type: Conference Paper

References (50)

1. Abemethy, R. B. and Thompson, J. W., Jr., 1973, "Handbook, Uncertainty in Gas Turbine Measurements", Report No. AEDC-TR-73-5 (AD 755-356), National Technical Information Service, Springfield, VA.
2. Aigner, M., et al., 1990, "Second Generation Low-Emission Combustors for ABB Gas Turbines: Tests Under Full-Engine Conditions", ASME Paper No. 90-GT-308.
3. Ambrose, M. J. and Obidinski, E. S., 1972, "Recent Field Tests for Control of Exhaust Emissions from a 35-MW Gas Turbine", ASME Paper No. 72-JPG-GT-2.
4. Anon., 1994, "Measurement of Exhaust Emissions from Stationary Gas Turbine Engines", ASME Standard B133.9-1994.
5. Aoyama, K., and Mandai, S., 1984, "Development of a Dry Low NOx Combustor for a 120-MW Gas Turbine", Trans. ASME, Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 795-800.
6. Austin, G. F., 1976, "Sources of Variability and Inaccuracies in Aircraft Gas Turbine Measurements", Report No. AC-76-02, USEPA, Ann Arbor, Michigan.
7. Bahr, D. W., and Lyon, T. F., 1984, "NOx Abatement via Water Injection in Aircraft-Derivative Turbine Engines", ASME Paper No. 84-GT-103.
8. Bumham, JB., et al., 1987, "Development, Installation, and Operating Results of a Steam Injection System (STIG) in a General Electric LM5000 Gas Generator", Trans. ASME, Journal of Engineering for Gas Turbines and Power, Vol. 109, pp. 257-262.
9. Campbell, N. T., et al, 1980, "Gas Turbine Engine Emissions Measurement Technology - An Overview", ASME Paper No. 80-GT-86.
10. Carl D. E. et al., 1975, "Exhaust Emissions from a 25-MW Gas Turbine Firing Heavy and Light Distillate Fuel Oils and Natural Gas", ASME Paper No. 75-GT-68.
11. Davis, LB., and Washam, R. M., 1989, "Development of a Dry Low NOx Combustor", ASME Paper No. 89-GT-255.
12. Dieck, R. H., 1974, "Gas Turbine Emission Measurement Uncertainty", ISA Paper No. 639.
13. Dieck, R. H., 1979, "Recent Results in Gas Turbine Emission Accuracy Assessment", Paper No. 79-37.2, Air Pollution Control Association.
14. Doyle, R. W., 1973, "Sampling a Turbine Engine Exhaust for Average Emissions", ASME Paper No. 73-WA/GT-3.
15. Dunder, TA. and Stone, C. D., 1995, "Permeation and Adsorption of Carbon Monoxide in Polymeric Tubing Used for Extractive Emissions Monitoring Applications", A&WMA Paper No. 95-TA16B.02.
16. Elwood, J. H., and Dieck, RH, 1975, "Techniques and Procedures for the Measurement of Aircraft Gas Turbine Engine Emissions", Journal of the Air Pollution Control Association, Vol. 25, No. 8, pp. 839-844.
17. Etheridge, C. J., 1994, "Mars SoLoNOx - Lean Premix Combustion Technology in Production", ASME Paper No. 94-GT-255.
18. Farrell, RA., and Thomas, M. E., 1981, "Effects of Inlet Conditions and Water Injection on Emissions from a Dual-Fuel Industrial Gas Turbine", ASME Paper No. 81-GT-47.
19. Girdlestone, T., 1997, "SCONOx, Catalytic Absorption System", Presented to the Industrial Combustion Coordinated Rulemaking Combustion Turbine Work Group, Long Beach, CA.
20. Grisso, J. R., and Jantzen, T. M., 1990, "Operating Experience with SCR for NOx Emission Control", Presented at the ASME Industrial Power Conference, St Louis, Missouri.
21. Hanson, KA., and Felix, P. C., 1975, "Emissions Characteristics of a Gas Turbine Combustor for High Nitrogen Content Fuels", ASME Paper No. 75-Pwr-28.
22. Hilt, MB. and Johnson, R. H., 1972, "Nitric Oxide Abatement in Heavy-Duty Gas Turbine Combustors by Means of Aerodynamics and Water Injection", ASME Paper No. 72-GT-53.
23. Hung, W. S. Y., 1976, "A Diffusion Limited Model that Accurately Predicts the NOx Emissions from Gas Turbine Combustors Including the Use of Nitrogen Containing Fuels", Trans. ASME, Journal of Engineering for Power, pp. 320-326.
24. Hung, W. S. Y., 1993, "Carbon Monoxide Emissions From Gas Turbines as Influenced by Ambient Temperature and Turbine Load", Trans. ASME, Journal of Engineering for Gas Turbines and Power, pp. 588-593.
25. Hung, W. S. Y., 1995, "Predictive Emission Monitoring System (PEMS): The Established NOx Monitoring System for Industrial Gas Turbines", Paper No. 95-MP16A.01, Air & Waste Management Association.
26. Hung, W. S. Y. and Agan, D. D., 1985, "The Control of NOx and CO from 7-MW Gas Turbines with Water Injection as Influenced by Ambient Conditions", ASME Paper No. 85-GT-50.
27. Hung, W. S. Y. and Revelt, C., 1993, "Certification of a Predictive Emission Monitoring System (PEMS) at a Compression Station in Colorado", A&WMA Paper No. 93-WA-79.02.
28. Hung, W. S. Y., et al., 1994, "Development of a Custom ambient NOx Correction Equation for a Mars SoLoNOx Gas Turbine", ASME Paper No. 94-GT-402.
29. Kajita, S., et al., 1993, "Development of a Dry Low NOx combustor for 1.5 MW Gas Turbines", ASME Paper No. 93-GT-393.
30. Kline, S. J. and McClintock, FA., 1953, "Describing Uncertainties in Single-Sampie Experiments", Mechanical Engineering, January issue, pp. 3-8.
31. Leonard, G. and Stegmaier, J., 1993, "Development of An Aeroderivative Gas Turbine Dry Low Emissions Combustion System", ASME Paper No. 93-GT-288.
32. McAdams, H. T., 1971, "Analysis of Aircraft Exhaust Emission Measurements: Statistics", CAL Technical Report No. NA-5007-K-2, Cornell Aeronautical Laboratory, Inc., Cornell University, Buffalo, N. Y.
33. Moffat, R. J., 1982, "Contributions to the Theory of Single Sample Uncertainty Analysis", Trans. ASME, Journal of Fluids Engineering, Vol 104, pp. 250-260.
34. Mumford, S. E., et al., 1977, "A Potential Low NOx Emission Combustor for Gas Turbines Using the Concept of Hybrid Combustion", Trans. ASME, Journal of Engineering for Power, Vol. 99, pp. 631-637.
35. NYSDEC., 1996, "Gas Turbine NOx Policy", Air Guide 39, New York State Department of Environmental Conservation, Albany, New York.
36. Prade, B., et al, 1996, "Development of an Improved Hybrid Burner - Initial Operating Experience in a Gas Turbine", ASME Paper No. 96-GT-45.
37. Rawlins, D. C., 1995, "Dry Low Emissions: Improvements to the SoLoNOx Combustion System", Eleventh Symposium on Industrial Applications of Gas Turbines, Canadian Gas Association.
38. Rubins, P. M. and Marchionna, N. R., 1976, "Evaluation of NOx Piediction-CoiTelation Equations for Small Gas Turbines", AIAA Paper No. 76-612.
39. SCAQMD, 1993, "Reclaim Rule", South Coast Air Quality Management District, Diamond Bar, California.
40. Shareef, G. S., et al., 1992, "Selective Catalytic Reduction NOx Control for Small Natural Gas-Fired Prime Movers", A&WMA Paper No. 92-136.06.
41. Sjoberg, M., "Continuous Emission Monitoring for NOx Emission Fees - Experiences from Five Swedish Plants", A&WMA Paper No. 94-TA29A.01.
42. Smith, K. O., and Roberts, PB., 1991, "Development of a Low NOx Industrial Gas Turbine Combustor", presented at the Canadian Gas Association Symposium on Industrial Application of Gas Turbines, Banff, Alberta.
43. Strand, T., 1996, "Dry Low NOx Combustion Systems Development and Operating Experience", ASME Paper No. 96-GT-274.
44. Sullivan, DA., and Mas, PA., 1975, "A Critical Review of NOx Correlations for Gas Turbine Combustors", ASME Paper No. 75-WA/GT-7.
45. USEPA 1987, "Test Methods and Procedures", Title 40, Code of Federal Regulations, Part 60, Subpart GG, Paragraph 60.335.
46. USEPA 1993a, "Continuous Emission Monitoring", Title 40, Code of Federal Regulations, Part 75.
47. USEPA 1993b, "Specifications and Test Procedures", Title 40, Code of Federal Regulations, Part 75, Appendix A, Paragraph 3.3.2.
48. Vaught, J. M., 1975, "The Effect of Inlet Temperature and Pressure on an Industrial Turbine Engine Exhaust Emission", ASME Paper No. 75-WA/GT-11.
49. Wasser, J. H., 1975, "Emission Characteristics of Small Gas Turbine Engines", Stationary Source Combustion Symposium, Atlanta, Georgia.
50. Willis, JD., et al., 1993, "Industrial EB211 Dry Low Emission Combustion", ASME Paper No. 93-GT-391.