Safe Design and Operation of Process Vents and Emission Control Systems

Safe Design and Operation of Process Vents and Emission Control Systems

Volumn , Issue , 2006, Pages 1-327

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84970993209     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/0470038071     Document Type: Book

References (130)

1. American Society of Mechanical Engineers. 2002. B32.3-Process Piping. New York, New York.
2. Center for. Chemical Process Safety (CCPS). 1998. Guidelines for Pressure Relief and Efluent Handling Systems. New York, New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers.
3. The Design Institute for Emergency Relief Systems PIERS). 1992. Emergency Relief System Design Using DIERS Technology. New York, New York. American Institute of Chemical Engineers.
4. Center for Chemical Process Safety (CCPS). 1988. Guidelines for Vapor Release Mitigation. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
5. Center for Chemical Process Safety (CCPS). 1997. Guidelines for Post-Release Mitigation Technology in the Chemical Process Industry. New York, New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers.
6. Grossel, Stanley S. 2002. Deflagration and Detonation Flame Arresters. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
7. Crowl, D. A. 2003. Understanding Explosions. New York, New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers.
8. Center for Chemical Process Safety (CCPS). 1993. Guidelines for Engineering Design for Process Safety. New York, New Y ork: Center for Chemical Process Safety of the American Institute of Chemical Engineers.
9. American Society of Mechanical Engineers. 2004. Boiler and Pressure Vessel Code. New York, New York ASME.
10. American Petroleum Institute. 2002. API 620, Design and Construction of Large, Welded, and Law-Pressure Storage Tanks. Washington D.C.: API.
11. American Petroleum Institute. 1998. APl Std. 650, Welded Steel Tanks for Oil Storage. Washington D.C.: API.
12. Center for Chemical Process Safety. 1998. Pressure Relief and Efluent Handling Systems. New York, New York American Institute of Chemical Engineers.
13. The Design Institute for Emergency Relief Systems of the American Institute of Chemical Engineers. 1992. Emergency Relief System Design Using DIERS Technology. New York, New York American Institute of Chemical Engineers.
14. JSletz, T. 1998. Process Plants: A Handbook of l n h e n t l y Safer Design. London, UK: Taylor and Francis, Inc.
15. Center for Chemical Process Safety. 1996. Inherently Safer Chemical Processes, a Life Cycle Approach. New York, New York: American Institute of Chemical Engineers.
16. Environmental Protection Agency. 1990. The Clean Air Act Amendments. Waslungton D.C.
17. Environmental Protection Agency. 2004. Accidental Release Prevention Requirements: Risk Management Program Requirements Under Clean Air Act Section 222(rX7). 40 CRF Part 68. Washington D.C. Code of Federal Regulations
18. Occupational Safety and Health Administration. 1992. Process Safety Management of Highly Hazardous Chemicals. 29 CFR 1910.119. Washington D.C. Code of Federal Regulations
19. Occupational Safety and Health Administration. 1920.206, Flammable and Combustible Liquids. Washington: OSHA.
20. Department of Transportation. 173.120 Class 3-Definitions. Washington: DOT.
21. American Soaety of Mechanical Engineers. 2002. B31.3-Process Piping. New York, New York.
22. Crowl, D. A and Louvar, J, F, 2002. Chemical Process Safety: Fundamentals with Applications, 2' Edition. New Jersey: Prentice Hall.
23. Day, Humphrey. 1816. On the Fire Damp of Coal Mines and on Methods of Lighting so as to Prevent its Explosion. London, UK: Trans. Royal Society.
24. National Fire Protection Association (NFPA). 2002. Fire Protection Guide to Hazardous Materials. (Previously NFPA 325M and 49). Quincy, Massachusetts.
25. Department of Health and Human Services, Centers for Disease Control and Prevention. 2003. NlOSH Pocket Guide to Chemical Hazards. Washington, DC: National Institute for Occupational Safety and Health.
26. Center for Chemical Process Safety (CCPS). 1998. Estimating the Flammable Mass of a Vapor Cloud. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
27. Bureau of Mines. 1965. Bulletin 627, Flammability Characteristics of Combustible Gases and Vapors. Washington, D.C. United States Department of the Interior.
28. Crowl, D. A. 2003. Understanding Explosions. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
29. Lees, F. P. 1980. Loss Prevention in the Process Industries, Hazard Identification, Assessment and Control. London, UK: Butterworth & Co. Ltd.
30. Hansel, J. 1992. Predicting and Controlling Flammability of Multiple Fuel and Multiple Inert Mixtures. Plant/Operations Progress, Vol. 11. New York, New York. American Institute of Chemical Engineers.
31. American Society for Testing and Materials. 2005. ASTM E681-04, Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) ASTM International.
32. Coward, H.F. and Jones, G.W. 1952. Bulletin 503, Limits of Flammability of Gases and Vapors. Washngton, D.C. Bureau of Mines. United States Department of the Interior.
33. Le Chatelier, H. 1891. Estimation of Firedamp by Flammability Limits. Ann. Mines.
34. Crowl, D. and J. Louvar. 1990. Chemical Process Safety Fundamentals with Applications. Englewood Cliffs, New Jersey: Prentice-Hall.
35. W.A. Affens and R.S. Sheinson. Autoignition: The importance of the Cool Flame in the Two-Stage Process. Paper presented to 1999 Loss Prevention Symposium, (Houston Texas), American Institute of Chemical Engineer, New York.
36. Eckhoff, Rolf K. 1997. Dust Explosions in the Process Industries. Wobum, MA: Butterworth Heinemann.
37. National Fire Protection Assodation (NFPA). 2002. NFPA 69, Standard on Explosion Prmention Systems. Quincy, Massachusetts.
38. Bartknecht, W. 1981. Explosions Course Protection and Prevention. Berlin, Heidelberg. New York Springer-Verlag.
39. Fitt, J. S. May 1981. Pressure Piling: A P r o b h for the Process Engineer, The Chemical Engineer, Institution of Chemical Engineers.
40. Grossel, Stanley S. 2002. Deflagration and Detonation Flame Arresters. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
41. Center for Chemical Process Safety (CCPS). 1993 Guidelines for Engineering Design for Process Safety. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers
42. Chatrathi, K., Going, J.E., Grandestaff, B. December 2001. Flame Propagation in Industrial Scale Piping. Process Safety Progress, Volume 20, No. 4. New York, New York: American Institute of Chemical Engineers.
43. Steen, H. and Schampel, K. 1983. Experimental Investigations on the Run-Up Distance of Gaseous Detonations in Large Pipes. 4h International Symposium on Loss Prevention and Safety Promotion in the Process Industries, Volume 3-Chemical Process Hazards. The Institution of Chemical Engineers. Elmsford, New York Pergamon Press Inc.
44. Roussakis, N. and Lapp, K. April 1991. A Comprehensive Test Method for Inline Flame Arresters. Plant/Operations Progress, Volume 10, No. 2. New York, New York: American Institute of Chemical Engineers.
45. Center for Chemical Process Safety (CCPS). 2003. Fire Protection in the Chemical, Petrochemical, and Hydrocarbon Industries. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
46. The Design Institute for Emergency Relief Systems (DIERS). 1992. Emergency Relief System Design Using DIERS Technology. New York, New York. American Institute of Chemical Engmeers.
47. Center for Chemical Process Safety (CCPS). 1993. Guidelines for Engineering Designfor Process Safety. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engneers.
48. American Industrial Hygiene Association. Emergency Response Planning Guidelines. 2004. http://www.aiha,org-/Committees/docnts/erpelevels.pdf
49. Center for Chemical Process Safety (CCPS). 1995. Chemical Reactivity Evaluation and Applications to Process Design. New York, New York: Center for Chemical Process Safety of the American Institute of Chemical Enpeers.
50. Center for Chemical Process Safety (CCPS). 1992. Guidelines for Hazard Evaluation Procedures, 2"* Edition. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
51. Center for Chemical Process Safety (CCPS). 2003. Essential Practices for Managing Chemical Reactivity New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
52. Urben, P. G. and Pitt, M. J. 2000. Bretherick's Handbook of Reactive Chemical Hazards. Amsterdam. Elsevier Science & Technology Books.
53. Sax, N. I. and Lewis, R.J. 1975. Dangerous Properties of Industrial Materials, 4th Edition. New York, New York. Van Nostrand Reinhold.
54. National Fire Protection Association (NFPA). 2004. NFPA 497, Recommended Practice fur the Classification of Flammable Liquids, Gases or Vapors and of Hazardous (Classified) Locations for Electrical lnstullations in Chemical Process Areas. Quincy, Massachusetts.
55. Pohanish, R. P. and Greene, S. A. 1997. Rapid Guide to Chemical Incompatibilities. New York, New York. Van Nostrand Reinhold. Office of Response and Restoration, National Ocean Service, NOAA.
56. Chemical Reactivity Worksheet. 2004. httv:l/response.restoration.noaa.gov/chemaids/react.html
57. U. S. EPA Office of Air Quality, Planning and Standards. August 2003. Latest Findings on National Air Quality-2002 Status and Trends. EPA DOC4. 54/K-03-01.
58. Center for Chemical Process Safety (CCPS). 1998. Guidelines for Pressure Relief and Effluent Handling Systems. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
59. The Design Institute for Emergency Venting PIERS). 1992. Emergency Relief System Design Using DIERS Technology. New York, New York. American Institute of Chemical Engineers.
60. American Society of Mechanical Engineers. 2002. B31.3-Process Piping. New York, New York.
61. National Fire Protection Association (NFPA). 2002. NFPA 69: Standard on Explosion Prevention Systems. Quincy, Massachusetts.
62. National Fire Protection Association (NFPA). 2002. NFPA 68: Guide for Venting of Dejlagrations. Quincy, Massachusetts.
63. Le Chatelier, H. 1891. Estimation of Firedamp by Flammability Limits, Ann. Mines.
64. Woodward, J. and Lygate. 2002. Establishing Ignition Conditions for the Tank Manifold Fire at the Powell Duffryn Tank Terminal. Plant/Operations Progress, Volume 21, No. 3. New York, New York. American Institute of Chemical Engineers.
65. Kletz, T. 2003. Still Going Wrong!: Case Histories of Process Plant Disasters and Hau They Could Have Been Avoided. Amsterdam. Elsevier.
66. Clark, D.G. and Sylvester, R.W. 1996. Ensure Process Vent Collection System Safety. Chemical Engineering Progress, Volume 92, No. 1. New York, New York. American Institute of Chemical Engineers.
67. Coward, H.F. and Jones, G.W. 1952. Bulletin 503, Limits of Flammability of Gases and Vapors, Washington, D.C. Bureau of Mines. United States Department of the Interior.
68. United States Coast Guard. 1990. 33 CFR Part 154, Marine Vapor Control Systems. Washington, D. C. Code of Federal Regulations.
69. American Petroleum Institute. 1997. API RP 521, Guidefor Pressure Relieving and Depressuring Systems. New York, New York.
70. Britton, L. 1996. Operating Atmosph~ric Vent Collection Headers Using Methane Gas Enrichment. Process Safety Progress, Volume 15, No. 4. New York, New York American Institute of Chemical Engineers.
71. Environmental Protection Agency. 1993. 40 CFR Part 60.18, General Control Device Requiremmnts. Washington D.C., Code of Federal Regulations.
72. Fike Corporation. 2002. Total Concept Explosion Protection CD, D:\2001 Fike EP Solutions, Slide 50.
73. Grossel, Stanley S. 2002. Defagration and Detonation Flame Arresters. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
74. Protectoseal. 2004. End-of-Line Crimped Metal Flame Arresters. http://www.protectoseal.com/27000.htm
75. Protectoseal. 2004. In-Line Crimped Metal Deflagration Flame Arrester. http://www.protectoseal.com/30O~.html
76. Protectoseal. 2004. In-Line Detonation Arrester. http://www.protectoseal.com/2526.html
77. Fike Corporation. 2002. Total Concept Explosion Protection CD, D:\2001 Fike EP Solutions, Slide 78v.
78. American Society of Mechanical Engineers. 2004. Boiler and Pressure Vessel Code. New York, New York ASME.
79. American Petroleum Institute. 1994. API RP 520, Design and Construction of Pressure-Relieving Systems in Refineries, 4th Edition. New York, New York.
80. Beveridge, H.J.R., and Jones, C.G. 1984. Shock Effects on a Bursting Disk in a Reliq Manifold. I. Chem. E. Symposium Series No. 85. Rugby, UK: Institution of Chemical Engineers.
81. Center for Chemical Process Safety. July, 2004. Process Safety Beacon. http://www. aiche.ortr/ccvs/safetvbeacohn.tr n
82. National Fire Protection Association (NFPA). 2002. NFPA 70: National Electrical Code, Article 500, Quincy, Massachusetts.
83. Kneal, M. 1984. The Engineering of Relief Disposal-A Review Paper. Institute of Chemical Engineers Symposium Series, 85,183. London, England.
84. Center for Chemical Process Safety (CCPS). 1995. Guidelines for Chemical Reactivity Evaluation and Application to Process Design. Center for Chemical Process Safety of the American Institute of Chemical Engineers. New York.
85. Center for Chemical Process Safety (CCPS). 1998. Guidelines for Pressure Relief and Effluent Handling Systems. Center for Chemical Process Safety of the American Institute of Chemical Engineers. New York.
86. Welding, T. V. 1984. Operational Experience with Total Containment Systems. Institution of Chemical Engineers Symposium Series, No. 85. Pages 251-263. London, England.
87. National Fire Protection Association (NFPA). 2002. NFPA 69: Standard on Explosion Prevention Systems. Quincy, Massachusetts.
88. Noronha, J. A., Merry, J. T., and Reid, W. C. 1982. Deflagration containment (DPC) for Vessel Safety Design. Plant/Operations Progress, l(1). New York
89. American Society of Mechanical Engineers. 2004. Boiler and Pressure Vessel Code. ASME. New York.
90. American Petroleum Institute. 1997. APl RP 521, Guide for Pressure Relieving and Depressuring Systems. New York.
91. Grossel, S. S. 1990. An Ovewim of Equipment foy Containment and Disposal of Emergency Relief Efluents. Journal of Loss Prevention. Process Industries, 3. New York
92. Center for Chemical Process Safety (CCPS). 1993. Guidelines for Engineering Design for Process Safety. Center for Chemical Process Safety of the American Institute of Chemical Engineers. New York.
93. National Fire Protection Association (NFPA). 2002. NFPA 68: Guide for Venting of Deflagrations. Quincy, Massachusetts.
94. Kanvat H., Lewis, M.J., Mizzen, M, Sandarac, 0. 1986. Pressure Suppression System Containments. A State-of-the-Art Report by a Group of Exerts of the NEA Committee on the Safety of Nuclear Installations, CSNI Report No. 126, OECD Nuclear Energy Agency, Paris.
95. Keiter, A. G. 1992. Emergency Pressure Relief Discharge Control by Passive Quenching-Update. Plant/Operations Progress. ll(3). New York.
96. Perry. 1997. Perry's Chemical Engineer's Handbook. 6th edition. (D. W. Green, ed.) McGraw-Hill. New York.
97. Watkins, R. N. 1967. Sizing Separators and Accumulators. Hydrocarbon Processing. 46(11). Gulf Publishing. Houston.
98. Evans, F. L. 1980. Equipment Design Handbook for R8nwies and Chemical Plants, 2nd ed., Vol. 2 Chapter 5, Separators and Accumulators and Chapter 6, Flare Stacks. Gulf Publishing. Houston.
99. Niemeyer, E. R. 1964. Check These Points When Designing Knock-Out Drums. Hydrocarbon Processing and Petroleum Refiner (now Hydrocarbon Processing). June. Gulf Publishing. Houston.
100. Svrcek, W. Y. and Monnery, W. D. 1993 Design Two-Phase Separators within the Right Limits. Chemical Engineering Progress. October. New York Mchtosh
101. Mchtosh R.D., Nolan, P. F., Rogers, R. L. and Lindsay, D. 1995. Small Scale Evaluation of Dump Tank Sizing Methods. Journal of Loss Prevention in the Process Industries. 8(3). Amsterdam, Netherlands.
102. Fewel, FK. J. and Kean, A. J. 1992. Computer Modeling Aids Separator Retrofit. Oil and Gas Journal, 90(27). Pennwell. Tulsa
103. Oklahoma Lydersen, A.L. 1983. Mass Transfer in Engineering Practice. John Wiley & Sons. New York.
104. Rousseau, R. W. 1987. Handbook of Separation Process Technology. Chapter 6, Absorption and Stripping. John Wiley & Sons. New York.
105. Code of Federal Regulations. 40 CFR Part 60.18. General Control Device Requirements (Flares). Washngton, D.C.
106. American Petroleum Institute, 2003. API Std. 537, Flare Details for General Refinery and Petrochemical Service. First Edition. New York.
107. Center for Chemical Process Safety (CCPS). 1995. Understanding Atmospheric Dispersion of Accidental Releases. Center for Chemical Process Safety of the American Institute of Chemical Engineers. New York.
108. Center for Chemical Process Safety (CCPS). 1996. Guidelinesfor Use of Vapor Cloud Dispersion and Source Emission for Accidental Releases. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
109. Crowl, D. and J. Louvar. 2002. Chemical Process Safety Fundamentals with Applications. 2nd Edition. Englewood Cliffs, New Jersey: Prentice-Hall.
110. Environmental Protection Agency. 2004. Accidental Release Prevention Requirements: Risk Management Program Requirements Under Clean Air Act Section ZIZ(rN7). 40 CRF Part 68. Washington D.C. Code of Federal Regulations
111. Occupational Safety and Health Administration. 1992. Process Safety Management of Highly Hazardous Chemicals. 29 CFR 1910.119. Washngton D.C. Code of Federal Regulations
112. Center for Chemical Process Safety (CCPS). 1992. Guidelines for Hazard Evaluation Procedures, 2 n d Edition. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
113. Center for Chemical Process Safety (CCPS). 2000. Guidelines for Chemical Process Quantitative Risk Assessment. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
114. Center for Chemical Process Safety (CCPS). 2001. Layer of Protection Analysis-Simplified Process Risk Assessment. Znd Edition. A CCPS Concept Book. New York, New York
115. Center for Chemical Process Safety of the American Institute of Chemical Engineers. Center for Chemical Process Safety (CCPS). 1999. Guidelines for Consequence Analysis of Chemical Releases. American Institute of Chemical Engineers, New York.
116. American Petroleum Institute. 1997. API RP 521, Guidefor Pressure Relieving and Depressuring Systems. New York, New York.
117. Center for Chemical Process Safety (CCPS). 1998. Guidelines for Design Solutions for Process Equipment Failures. American Institute of Chemical Engineers, New York.
118. Grossel. S.S. Center for Chemical Process Safety (CCPS). 2002. Def7agration and Detonation Flame Arresters. New York, New York Center for Chemical Process Safety of the American Institute of Chemical Engineers.
119. National Fire Protection Association (NFPA). 2002. NFPA 69, Standard on Explosion Prevention Systems. Quincy, Massachusetts.
120. American Petroleum Institute. 1997. API RP 521, Guide for Pressure Relieving and Depressuring Systems. New York, New York.
121. Bretherick L. 1990. Reactive Chemical Hazards. 4*h edition. Butterworths, London
122. Pohanish R.P. & Green S.A. 1997. Rapid Guide to Chemical Instabilities. Van Nostrand Reinhold, New York
123. National Fire Protection Association. NFPA 49, Hazardous Chemical Data. Quincy, Massachusetts
124. Chung, D. Explosion and Fire at Powell Duffryn Terminals, Savannah, Georgia. LPS 2000, AIChE Proceedings of 34thAnnual Loss Prevention Symposium. American Institute of Chemical Engineers, New York, New York.
125. Woodward, J. and Lygate, J. 2002. Establishing Ignition Conditions for the Tank Manifold Fire at the Powell Duffryn Tank Terminal. Progress Safety Progress, Volume 21, No. 3. New York, New York. American Institute of Chemical Engineers.
126. A. A. Naujokas Spontaneous Combustion of Carbon Beds. Page 126, Plant/Operations Progress, Volume 4, No. 2. New York, New York. American Institute of Chemical Engineers.
127. T. J. Meyers, et. al. Fires and Explosions in Vapor Control Systems: A Lessons Learned Anthology. LPS 2002. AIChE Proceedings of 34thAnnual Loss Prevention Symposium. American Institute of Chemical Engineers, New York, New York.
128. Urbinato, D. Summer 1994. Taking Tomics Out of the Air. Washngton D.C. EPA Journal.
129. Fleming, J. R., Knorr, B. R. 2003. History of the Clean Air Act. American Meteorological Society website (wwn;.aiiictsoc.org) ; EPA Office of Ecosystems and Communities website (www.eDa.gov/ecocommunity)
130. U. S. EPA Office of Air Quality, Planning and Standards. August 2003. Latest Findings on National Air Quality-2002 Status and Trends. EPA DOC4. 54/K-03-01.