Wind turbine systems: History, structure, and dynamic model

Handbook of Renewable Energy Technology

Volumn , Issue , 2011, Pages 21-51

  Masoud Barakati, S ^a  

^a UNIVERSITY OF SISTAN AND BALUCHESTAN   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

DYNAMIC MODELS; POWER CONVERTERS;

HISTORICAL BACKGROUND; POWER ELECTRONIC CONVERTERS; WIND TURBINE STRUCTURES; WIND TURBINE SYSTEMS;

WIND TURBINES;

EID: 84970974469     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1142/9789814289078_0002     Document Type: Chapter

References (83)

1. S. Masoud Barakati, Applications of Matrix Converters forWind Turbine Systems (VDMVerlag Dr. Muller, Germany, 2008).
2. S. Krohn, “The wind energy pioneer—Poul la Cour,” The DanishWind Turbine Manufacturers Association, http://webasp.ac-aix-marseille.fr/rsi/bilan/action0405/13LduRempart/Doc/Doc page/windpower.pdf (2008).
3. R. Hoffmann and P. Mutschler, “The influence of control strategies on the energy capture of wind turbines,” Application of Electrical Energy (2000), pp. 886–893.
4. P. Migliore, J. van Dam and A. Huskey, “Acoustic Tests of SmallWind Turbinesat,” http://www.wind.appstate.edu/reports/NRELAcousticTestsofSmallWindTurbines.pdf (2007).
5. L.H. Hansen, L. Helle, F. Blaabjerg, E. Ritchie, S. Munk-Nielsen, H. Bindner, P. Sørensen and B. Bak-Jensen, “Conceptual survey of generators and power electronics for wind turbines,” Risø National Laboratory, Roskilde, Denmark, December 2001.
6. O. Carlson, J. Hylander and K. Thorborg, “Survey of variable speed operation of wind turbines,” European Union Wind Energy Conf., Goeteborg, Sweden, May 1996, pp. 406–409.
7. M. Idan, D. Lior and G. Shaviv, “A robust controller for a novel variable speed wind turbine transmission,” J. Solar Energy Engineering 120 (1998) 247–252.
8. S. Bhowmik and R. Spee, “Wind speed estimation based variable speed wind power generation,” Proc. 24th Annual Conf. of the IEEE, vol. 2, 31 August–4 September 1998, pp. 596–601.
9. M.G. Simoes, B.K. Bose and R.J. Spiegel, “Fuzzy logic based intelligent control of a variable speed cage machine wind generation system,” IEEE Tran. Power Electronics 12 (1997) 87–95.
10. Q. Wang and L. Chang, “An intelligent maximum power extraction algorithm for inverter-based variable speed wind turbine systems,” IEEE Trans. Power Electronics 19 (2004) 1242–1249.
11. A. Miller, E. Muljadi and D.S. Zinger, “A variable speed wind turbine power control,” IEEE Trans. Energy Conversion 12 (1997) 181–186.
12. L. Xu and C. Wei, “Torque and reactive power control of a doubly fed induction machine by position sensorless scheme,” IEEE Trans. Industry Applications 31 (1995) 636–642.
13. W. Lu and B.T. Ooi, “Multiterminal LVDC system for optimal acquisition of power in wind-farm using induction generators,” IEEE Trans. Power Electronics 17 (2002) 558–563.
14. J.L. Rodriguez-Amenedo, S. Arnalte and J.C. Burgos, “Automatic generation control of a wind farm with variable speed wind turbines,” IEEE Trans. Energy Conversion 17 (2002) 279–284.
15. D. Seyoum and M.F. Rahman, “The dynamic characteristics of an isolated self-excited induction generator driven by a wind turbine,” Rec. in Proc. IAS Conf., Industry Applications Conf., Annual Meeting, vol. 2, October 2002, pp. 731–738.
16. F. Blaabjerg, Z. Chen and S.B. Kjaer, “Power electronics as efficient interface in dispersed power generation systems,” IEEE Trans. Power Electronics 19 (2004) 1184–1194.
17. L.L. Freries, Wind Energy Conversion Systems (Prentice Hall, 1990).
18. S. Heier, Grid Integration ofWind Energy Conversion Systems, Chap. 1 (JohnWiley & Sons Ltd, 1998).
19. Live Journal, www.windturbine.livejournal.com.
20. J.F. Manwell, J.G. McGowan and A.L. Rogers, Wind Energy Explained, Theory, Design and Application (Wiley, 2002).
21. S. Mathew, Wind Energy Fundamentals, Resource Analysis, and Economics (Springer, 2006).
22. P.G. Casielles, J. Sanz and J. Pascual, “Control system for a wind turbine driven self excited asynchronous generator,” Proc. Mediterranean Electrotechnical Integrating Research, Industry and Education in Energy and Communication Engineering, MELECON’89 Conf., April 1989, pp. 95–98.
23. D.A. Torrey, “Variable-reluctance generators in wind-energy systems,” Rec. in IEEE PESC ’93, Power Electronics Specialists Conf., June 1993, pp. 561–567.
24. J. Matevosyan, “Wind power in areas with limited export capability,” Licentiate Thesis Royal Institute of Technology Department of Electrical Engineering Stockholm (2004).
25. A.J.G. Westlake, J.R. Bumby and E. Spooner, “Damping the power-angle oscillations of a permanent-magnet synchronous generator with particular reference to wind turbine applications,” IEE Proc. Electric Power Applications, vol. 143, May 1996, pp. 269–280.
26. S. Grabic, N. Celanovic and V. Katie, “Series converter stabilized wind turbine with permanent magnet synchronous generator,” IEEE Conf. PESC’04, Power Electronics Specialists Conf., vol. 1, June 2004, pp. 464–468.
27. L. Dambrosio and B. Fortunato, “One step ahead adaptive control technique for a wind turbinesynchronous generator system,” Proc. IECEC-97, Intersociety Energy Conversion Engineering Conf., vol. 3, July 1997, pp. 1970–1975.
28. D.S. Zinger and E. Muljadi, “Annualized wind energy improvement using variable speeds,” IEEE Trans. Industry Applications 33 (1997) 1444–1447.
29. P. Bauer, S.W.H. De Haan, and M. R. Dubois, “Wind energy and offshore windparks: State of the art and trends”, EPE-PEMC Dubrovnik & Cavat (2002), pp 1–15.
30. P. Bauer, S.W.H. De Haan, C.R. Meyl and J.T.G. Pierik, “Evaluation of electrical systems for offshore wind farms,” Rec. in IEEE Industry Applications Conf., vol. 3, October 2000, pp. 1416–1423.
31. R. Teodorescu and F. Blaabjerg, “Flexible control of small wind turbines with grid failure detection operating in stand-alone and grid-connected mode,” IEEE Trans. Power Electronics 19 (2004) 1323–1332.
32. E. Bogalecka and Z. Krzeminski, “Control systems of doubly-fed induction machine supplied by current controlled voltage source inverter,” 6th Int. Conf. on Electrical Machines and Drives, Conf. Publ. No. 376, September 1993, pp. 168–172.
33. C. Knowles-Spittle, B.A.T.Al Zahawi and N.D. MacIsaac, “Simulation and analysis of 1.4MW static Scherbius drive with sinusoidal current converters in the rotor circuit,” Proc. IEE 7th Int. Conf. on Power Electronics and Variable Speed Drives, Conf. Publ. No. 456, September 1998, pp. 617–621.
34. R. Pena, J.C. Clare and G.M. Asher, “A doubly fed induction generator using back-to-back PWM converters supplying an isolated load from a variable speed wind turbine,” Electric Power Applications, IEE Proc., vol. 143, September 1996, pp. 380–387.
35. T. Yifan and L. Xu, “A flexible active and reactive power control strategy for a variable speed constant frequency generating system,” IEEE Trans. Power Electronics 10 (1995) 472–478.
36. W.-S. Chienand and Y.-Y. Tzou, “Analysis and design on the reduction of DC-link electrolytic capacitor for AC/DC/AC converter applied to AC motor drives,” Proc. IEEE PESC 98, Power Electronics Specialists Conf., vol. 1, May 1998, pp. 275–279.
37. J.S. Kim and S.K. Sul, “New control scheme for AC-DC-AC converter without DC link electrolytic capacitor,” IEEE Proc. PESC’93, Power Electronics Specialists Conf., 1993, June 1993, pp. 300–306.
38. K. Siyoung, S. Seung-Ki and T.A. Lipo, “AC toAC power conversion based on matrix converter topology with unidirectional switches,” Proc. APEC’98, Applied Power Electronics Conf. and Exposition, 1998, vol. 1, February 1998, pp. 301–307.
39. M. Salo and H. Tuusa, “A high performance PWM current source inverter fed induction motor drive with a novel motor current control method,” Proc. IEEE PESC’99, Power Electronics Specialists Conf., 1999, vol. 1, 27 June–1 July 1999, pp. 506–511.
40. M. Venturini, “A new sine wave in sine wave out, conversion technique which eliminates reactive elements,” Proc. POWERCON 7 (1980), pp. E3 1–E3 15.
41. M. Venturini and A. Alesina, “The generalized transformer: A new bidirectional sinusoidal waveform frequency converter with continuously adjustable input power factor,” Proc. IEEE PESC’ 80 (1980), pp. 242–252.
42. J. Rodriguez, “A new control technique for AC–AC converters,” Proc. IFAC Control in Power Electronics and Electrical Drives Conf., Lausanne, Switzerland (1983), pp. 203–208.
43. L. Helle, K.B. Larsen, A.H. Jorgensen, S. Munk-Nielsen and F. Blaabjerg, “Evaluation of modulation schemes for three-phase to three-phase matrix converters,” IEEE Trans. Industrial Electronics 51 (2004) 158–171.
44. M. Aten, C. Whitley, G. Towers, P. Wheeler, J. Clare and K. Bradley, “Dynamic performance of a matrix converter driven electro-mechanical actuator for an aircraft rudder,” Proc. 2nd Int. Conf. Power Electronics, Machines and Drives, PEMD 2004, vol. 1, April 2004, pp. 326–331.
45. B. Ooi and M. Kazerani, “Elimination of thewaveform distortions in the voltage-source-converter type matrix converter,” Conf. Rec. IEEE-IAS Annu. Meeting, vol. 3 (1995), pp. 2500–2504.
46. J. Wu, P. Dong, J. M. Yang and Y.R. Chen, “A novel model of wind energy conversion system,” Proc. DRPT2004, IEEE Int. Conf. on Electric Utility Deregulation and Power Technologies, April 2004, Hong Kong, pp. 804–809.
47. S.M. Barakati, M. Kazerani and J.D. Aplevich, “A dynamic model for a wind turbine system including a matrix converter,” Proc. IASTED, PES2007, January 2006, pp. 1–8.
48. T. Satish, K.K. Mohapatra and N. Mohan, “Speed sensorless direct power control of a matrix converter fed induction generator for variable speed wind turbines,” Proc. Power Electronics, Drives and Energy Systems, PEDES’06, December 2006, pp. 1–6.
49. S.F. Pinto, L. Aparicio and P. Esteves, “Direct controlled matrix converters in variable speed wind energy generation systems power engineering,” Proc. Energy and Electrical Drives, POWERENG 2007, April 2007, pp. 654–659.
50. K. Huang andY. He, “Investigation of a matrix converter-excited brushless doubly-fed machine wind-power generation system,” Proc. Power Electronics and Drive Systems, PEDS 2003, November 2003, vol. 1, pp. 743–748.
51. Q. Wang, X. Chen andY. Ji, “Control for maximal wind energy tracing in matrix converter AC excited brushless doubly-fed wind power generation system,” Proc. IEEE Industrial Electronics, IECON 2006, November 2006, pp. 718–723.
52. L. Zhang and C. Watthanasarn, “A matrix converter excited doubly-fed induction machine as a wind power generator,” Proc. Power Electronics and Variable Speed Drives, September 1998, pp. 532–537.
53. D. Aouzellag, K. Ghedamsi and E.M. Berkouk, “Network power flow control of variable speed wind turbine,” Proc. Power Engineering, Energy and Electrical Drives, POWERENG 2007, April 2007, pp. 435–439.
54. L. Zhang, C. Watthanasarn and W. Shepherd, “Application of a matrix converter for the power control of a variable-speed wind-turbine driving a doubly-fed induction generator,” Proc. Industrial Electronics, Control and Instrumentation, IECON’97, vol. 2, November 1997, pp. 906–911.
55. M. Kazerani, “Dynamic matrix converter theory development and application,” Ph.D. thesis, Department of Electrical Eng., McGill University, Canada (1995).
56. B.T. Ooi and M. Kazerani, “Application of dyadic matrix converter theory in conceptual design of dual field vector and displacement factor controls,” Proc. IEEE Industry Applications Society Annual Meeting, vol. 2, October 1994, pp. 903–910.
57. H. Nikkhajoei, A. Tabesh and R. Iravani, “Dynamic model of a matrix converter for controller design and system studies,” IEEE Trans. Power Delivery 21 (2006) 744–754.
58. A. Alesina and M. Venturini, “Solid-state power conversion: A Fourier analysis approach to generalized transformer synthesis,” IEEE Trans. Circuits and Systems 28 (1981) 319–330.
59. S.M. Barakati, M. Kazerani and J.D. Aplevich, “An overall model for a matrix converter,” IEEE Int. Symp. Industrial Electronics, ISIE08, June 2008.
60. S.M. Barakati, M. Kazerani and J.D. Aplevich, “A dynamic model for a wind turbine system including a matrix converter,” Proc. IASTED, PES2007, January 2006, pp. 1–8.
61. S.M. Barakati, M. Kazerani and X. Chen, “A new wind turbine generation system based on matrix converter,” Proc. IEEE PES General Meeting, June 2005, pp. 2083–2089.
62. E.S. Adin and W. Xu, “Control design and dynamic performance analysis of a wind turbineinduction genrator unit,” IEEE Trans. Energy Conversion 15 (2000) 91–96.
63. J.G. Slootweg, H. Polinder and W.L. Kling, “Representing wind turbine electrical generating systems in fundamental frequency simulations,” IEEE Trans. Energy Conversion 18 (2003) 516–524.
64. L.S.T. Ackermann, “Wind energy technology and current status. A review,” Renewable and Sustainable Energy Review 4 (2000) 315–375.
65. E. Muljadi and C.P. Butterfield, “Power quality aspects in a wind power plant,” IEEE Power Engineering Society General Meeting Montreal, Quebec, Canada, June 2006.
66. R. Grunbaum, “Voltage and power quality control in wind power,” ABB Power Systems AB, http://library.abb.com/GLOBAL/SCOT/scot221.nsf/VerityDisplay/6B5A44E46BAD5D3DC12 56FDA003B4D11/$File/PowerGenEurope2001.pdf (2008).
67. S. Kim, S.-K. Sul and T.A. Lipo, “AC/AC power conversion based on matrix converter topology with unidirectional switches,” IEEE Tran. Industry Applications 36 (2000) 139–145.
68. A.D. Hansen, C. Jauch, P. Sørensen, F. Iov and F. Blaabjerg, “Dynamic wind turbine models in power system simulation tool DIgSILENT,” Risø National Laboratory, Roskilde, http://www.digsilent.de/Software/ApplicationExamples/ris-r-1400.pdf (2003).
69. S. Seman, F. Iov, J. Niiranen and A. Arkkio, “Comparison of simulators for variable speed wind turbine transient analysis,” Int. J. Energy Research 30 (2006) 713–728.
70. L. Mihet-Popa, F. Blaabjerg and I. Boldea, “Wind turbine Generator modeling and simulation where rotational speed is the controlled variable,” IEEE Trans. Industry Application 40 (2004) 3–10.
71. B.K. Bose, Power Electronics And Ac Drives (Prentice-Hall, 1986).
72. P.C. Krause, O. Wasynczuk and S.D. Sudhoff, Analysis of Electric Machinery (IEEE Press, 1994).
73. T.F. Chan and L.L. Lai, “Capacitance requirements of a three-phase induction generator selfexcited with a single capacitance and supplying a single-phase load,” IEEE Trans. Energy Conversion 17 (2002) 90–94.
74. Electric Systems Consulting ABB Inc., “Integration of wind energy into the alberta electric system—stages2&3: Planning and Interconnection Criteria,” Alberta Electric System Operator Report Number: 2004-10803-2.R01.4.
75. B. Ozpineci and L.M. Tolbert, “Simulink implementation of induction machine model — a modular approach,” Proc. Electric Machines and Drives Conference, IEMDC’03, vol. 2, June 2003, pp. 728–734.
76. A. Munoz-Garcia, T.A. Lipo and D.W. Novotny, “A new induction motor V/f control method capable of high-performance regulation at low speeds,” IEEE Tran. Industry Applications 34 (1998) 813–821.
77. Powersim Technologies INC, Psim user manual, version 4.1, Set. 1999, http://www.powersim tech.com (2008).
78. P.M. Anderson and A. Bose, “Stability simulation of wind turbine systems,” IEEE Trans. Power Apparatus and system PAS-102 (1983) 3791–3795.
79. C. Nichita, D. Luca, B. Dakyo and E. Ceanga, “Large band simulation of the wind speed for real time wind turbine simulators,” IEEE Trans. Energy Conversion 17 (2002) 523–529.
80. L. Neft and C.D. Shauder, “Theory and design of a 30-hp matrix converter,” IEEE Trans. Industrial Applications 28 (1992) 546–551.
81. P. Wheeler and D. Grant, “Optimized input filter design and low loss switching techniques for a practical matrix converter,” Proc. of Industrial Electronics, vol. 144, January 1997, pp. 53–60.
82. D.G. Holmes and T.A. Lipo, “Implementation of a controlled rectifier using AC-AC matrix converter theory,” Conf. Rec. PESC’89, Power Electronics Specialists Conf., June 1989, vol. 1, pp. 353–359.
83. H.W. van der Broeck, H.-C. Skudelny and G.V. Stanke, “Analysis and realization of a pulsewidth modulator based on voltage space vectors,” IEEE Tran. Industry Applications 24 (1988) 142–150.