Non-destructive investigation of thermoplastic reinforced composites

Composites Part B: Engineering

Volumn 97, Issue , 2016, Pages 244-254

  Hassen, Ahmed Arabi ^a,b   Taheri, Hossein ^c   Vaidya, Uday K ^d  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b University of Alabama at Birmingham   (United States)

^c Iowa State University   (United States)

^d University of Tennessee   (United States)

Author keywords

A. Glass fibers; B. Defects; D. Non destructive testing; E. Compression moulding; E. Thermoplastic resin

Indexed keywords

COMPRESSION MOLDING; DEFECTS; FIBERS; GLASS FIBERS; MOLDING; NONDESTRUCTIVE EXAMINATION; REINFORCED PLASTICS; ULTRASONIC APPLICATIONS; X RAY RADIOGRAPHY;

COMPOSITE SPECIMENS; E. COMPRESSION MOULDINGS; E. THERMOPLASTIC RESINS; MANUFACTURING DEFECTS; NON DESTRUCTIVE TESTING; NON-DESTRUCTIVE EVALUATION TECHNIQUES; REINFORCED COMPOSITES; ULTRASONIC TECHNIQUES;

ULTRASONIC TESTING;

EID: 84969577545     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2016.05.006     Document Type: Article

References (46)

1. S. Mazumdar What will drive composites growth in 2015? Composite manufacturing January, 2015 USA American Composites Manufacturers Association (ACMA)
2. M. Hambach, H. Möller, T. Neumann, and D. Volkmer Carbon fibre reinforced cement-based composites as smart floor heating materials Compos Part B Eng 90 2016 465 470
3. Ma H-l, Z. Jia, Lau K-t, J. Leng, and D. Hui Impact properties of glass fiber/epoxy composites at cryogenic environment Compos Part B Eng 92 2016 210 217
4. J.G. Carrillo, R.A. Gamboa, E.A. Flores-Johnson, and P.I. Gonzalez-Chi Ballistic performance of thermoplastic composite laminates made from aramid woven fabric and polypropylene matrix Polym Test 31 4 2012 512 519
5. L.R. Xu, A. Krishnan, H. Ning, and U. Vaidya A seawater tank approach to evaluate the dynamic failure and durability of E-glass/vinyl ester marine composites Compos Part B Eng 43 5 2012 2480 2486
6. N.D. Mao, T.D. Thanh, N.T. Thuong, A.-C. Grillet, N.H. Kim, and J.H. Lee Enhanced mechanical and thermal properties of recycled ABS/nitrile rubber/nanofil N15 nanocomposites Compos Part B Eng 93 2016 280 288
7. M.H. Akonda, C.A. Lawrence, and B.M. Weager Recycled carbon fibre-reinforced polypropylene thermoplastic composites Compos Part A Appl Sci Manuf 43 1 2012 79 86
8. Hassen Ahmed Arabi, A. Poudel, T. Philip Chu, M. Yester, and U.K. Vaidya Tracing defects in glass fiber/polypropylene composites using ultrasonic C-Scan and X-ray computed tomography methods Testing ASfN ASNT annual conference October, 2014 ASNT Charleston, SC, USA
9. A. Poudel, S.S. Shrestha, J.S. Sandhu, T.P. Chu, and C.G. Pergantis Comparison and analysis of Acoustography with other NDE techniques for foreign object inclusion detection in graphite epoxy composites Compos Part B Eng 78 2015 86 94
10. V. Dayal Wave propagation in a composite with a wavy sublamina J Nondestruct Eval 14 1 1995 1 7
11. D. Wu, R. Steegmüller, W. Karpen, and G. Busse Characterization of CFRP with lockin thermography D. Thompson, D. Chimenti, Review of progress in quantitative nondestructive evaluation 1995 Springer US 439 446
12. V. Munoz, B. Valès, M. Perrin, M.L. Pastor, H. Welemane, A. Cantarel, and et al. Damage detection in CFRP by coupling acoustic emission and infrared thermography Compos Part B Eng 85 2016 68 75
13. S.K. Chakrapani, V. Dayal, and D. Barnard Detection and characterization of waviness in unidirectional GFRP using Rayleigh wave air coupled ultrasonic testing (RAC-UT) Res Nondestruct Eval 24 4 2013 191 201
14. G. Busse, D. Wu, and W. Karpen Thermal wave imaging with phase sensitive modulated thermography J Appl Phys 71 8 1992 3962 3965
15. N. Palka, R. Panowicz, M. Chalimoniuk, and R. Beigang Non-destructive evaluation of puncture region in polyethylene composite by terahertz and X-ray radiation Compos Part B Eng 92 2016 315 325
16. J. Kastner, B. Plank, and G. Requena Non-destructive characterisation of polymers and Al alloys by polychromatic cone-beam phase contrast tomography Mater Charact 64 2012 79 87
17. T.S. Jones, D. Polansky, and H. Berger Radiation inspection methods for composite materials NDT Int 21 4 1988 277 282
18. Hassen Ahmed Arabi, U.K. Vaidya, and Britt Frank Structural integrity of fiber reinforced plastic piping Mater Eval 73 7 2015 919 929
19. H. Hocheng, and C.C. Tsao Computerized tomography and C-scan for measuring drilling-induced delamination in composite material using twist drill and core drill Key Eng Mater 339 May, 2007 16 20
20. C. Goidescu, H. Welemane, C. Garnier, M. Fazzini, R. Brault, E. Péronnet, and et al. Damage investigation in CFRP composites using full-field measurement techniques: combination of digital image stereo-correlation, infrared thermography and X-ray tomography Compos Part B Eng 48 2013 95 105
21. A.R. Lowrey, K.D. Friddell, and D.W. Cruikshank Nondestructive evaluation of aerospace composites using medical computed tomography (CT) scanners Proceedings of American Society for Nondestructive Testing (ASNT) spring conference. Washington, DC, USA, Conference, Conference 11-14 March 1985
22. Yang Zhen-Guo, B. Lauke, and J. Singletary Ultrasonic testing technique for small-calibre piping containing defects Int J Press Vessels Pip 68 3 1996 325 330
23. D. Seshu, and M.N.R. Rama Dakshina Non destructive testing of bridge pier - a case study Procedia Eng 54 0 2013 564 572
24. Chakrapani SK, Dayal V, Barnard DJ. Investigation of waviness in wind turbine blades: structural health monitoring. The 39th Annual Review of progress in quantitative nondestructive evaluation AIP conf proc of progress in QNDE2013. p. 310-316.
25. W.H. Green, and P. Sincebaugh Nondestructive evaluation of complex composites using advanced computed tomography (CT) imaging Laboratory Ar, editor. Maryland, USA Feberuary 2001
26. H. Theodoros, B. Efstratios, and G.T. Nicolaos Application of ultrasonic C-Scan techniques for tracing defects in laminated composite materials J Mech Eng 57 3 2011 192 203
27. S.K. Chakrapani, D. Barnard, and V. Dayal Detection of in-plane fiber waviness in composite laminates using guided Lamb modes 2014 AIP Publishing 1134 1140
28. S.K. Chakrapani, V. Dayal, D.J. Barnard, A. Eldal, and R. Krafka Ultrasonic Rayleigh wave inspection of waviness in wind turbine blades: experimental and finite element method Review of progress in quantitative nondestructive evaluation AIP conf proc 2012 1911 1917
29. H. Taheri, K.M. Ladd, F. Delfanian, and J. Du Phased array ultrasonic technique parametric evaluation for composite materials November, 2014 IMECE (ASME) Montreal, Canada
30. D. Hopkins, G. Neau, and L.L. Ber Advanced phased-array technologies for ultrasonic inspection of complex composite parts November 2011 Smart Materials, Structures & NDT in Aerospace Conference Montreal, Quebec, Canada
31. A.S.L. Rosset, and O. Ratib OsiriX: an open-source software for navigating in multidimensional DICOM images J Digit Imaging 17 3 Sep 2004 205 216
32. ASTM Standard method for verifying the alignment of X-ray diffraction instrumentation for residual stress measurement E915, Vol301 1986 ASTM USA
33. ASTM Standard Guide for Computed Tomography (CT) Imaging ASTM E1441-11 2011 ASTM USA
34. R. Oster Computed tomography as a non-destructive test method for fiber main rotor blades in development, series and maintenance Proceedings of international symposium on computerized tomography for industrial applications and image processing in radiology 1999 Berlin, Germany, Conference, Conference March
35. E. Peter, Skaug Sande, A. Catrine, Trægde Martinsen, E.O. Hole, and H.M. Olerud Interphantom and interscanner variations for Hounsfield units - establishment of reference values for HU in a commercial QA phantom Phys Med Biol 55 2010 5123 5135
36. P.K. Mallick Fiber reinforced composites: materials, manufacturing, and design 2008 Taylor and Francis Group New York, USA
37. F.E. Boas, and D. Fleischmann CT artifacts: causes and reduction techniques Imaging Med 4 2 2012 229 240
38. B. De Man, J. Nuyts, P. Dupont, G. Marchal, and P. Suetens Metal streak artifacts in X-ray computed tomography: a simulation study IEEE Trans Nucl Sci 46 3 1999 691 696
39. J.H. Hubbell, and S.M. Seltzer Tables of X-ray mass attenuation coefficients and mass energy-absorption coefficients 1 keV to 20 MeV for elements Z= 1 to 92 and 48 additional substances of dosimetric interest 1995 National Inst. of Standards and Technology-PL Gaithersburg, MD (United States) Ionizing Radiation Div
40. ®HN DuPont Polyimide film: technical data sheet 2011
41. Tiago Ferreira, and Wayne Rasband Health NIo ImageJ user guide October, 2012 National Institutes of Health USA
42. MathWorks Matlab Primer R2014a manual 2014 Mathwork, Inc MA, USA
43. M.P.F. Sutcliffe, S.L. Lemanski, and A.E. Scott Measurement of fibre waviness in industrial composite components Compos Sci Technol 72 16 2012 2016 2023
44. V. Revol, B. Plank, R. Kaufmann, J. Kastner, C. Kottler, and A. Neels Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer NDT E Int 58 2013 64 71
45. W. Muhogora, A. Devetti, R. Padovani, P. Msaki, and F. Bonutti Application of European protocol in the evaluation of contrast-to-noise ratio and mean glandular dose for two digital mammography systems Radiat Prot Dosim 129 6 2008 129 231
46. W. Muhogora, R. Padovani, and P. Msaki Initial quality performance results using a phantom to simulate chest computed radiography J Med Phys 36 1 2011 22 28