Engineering feasibility of induced strain actuators for rotor blade active vibration control

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 2190, Issue , 1994, Pages 107-122

  Giurgiutiu, Victor ^a   Chaudhry, Zaffir ^a   Rogers, Craig A ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTUATORS; INTELLIGENT SYSTEMS; SPECIFICATIONS; STRAIN ENERGY;

ACTIVE VIBRATION CONTROLS; CLOSED-FORM FORMULAE; COMPRESSIBILITY EFFECTS; DISPLACEMENT AMPLIFIER; ENGINEERING FEASIBILITY; HIGHER HARMONIC CONTROL; INDIVIDUAL BLADE CONTROL; INDUCED STRAIN ACTUATOR;

TURBOMACHINE BLADES;

EID: 84968129671     PISSN: 0277786X     EISSN: 1996756X     Source Type: Conference Proceeding    
DOI: 10.1117/12.175175     Document Type: Conference Paper

References (40)

1. Robinson, L., and Friedmann, P. P., "A Study of Fundamental Issues in Higher Harmonic Control Using Aeroelastic Simulation", Journal American Helicopter Society, Vol. 36, No. 2, April 1991, pp. 32-43.
2. Nguyen, K, and Chopra, I., "Application of Higher Harmonic Control (HHC) to Rotors Operating at High Speed and Thrust", Journal American Helicopter Society, Vol. 35, No. 3, July 1990, pp. 78-89.
3. Straub, F. K., and Byrns, E. V. Jr., "Application of Higher Harmonic Blade Feathering on the OH-6A Helicopter for Vibration Reduction", NASA CR-4013, December 1986.
4. Shaw, J., Albion, N., Hanker, E. J. Jr., and Teal, R. S., "Higher Harmonic Control: Wind Tunnel Demonstration of Fully Effective Vibratory Hub Force Suppression", Journal American Helicopter Society, Jan. 1989, pp. 14-25.
5. Ham, N. D., "Helicopter Individual Blade Control Research at MIT 1977-1985", Vertica, Vol. 11, No. 1/2, pp. 109-122, 1987.
6. Jacklin, S. A., Leyland, J. A., and Blaas, A., "Full-Scale Wind Tunnel Investigation of a Helicopter Individual Blade Control System", Proceedings of the AIAA/ASME/ASCE/AHS/ASC 34st Structures, Structural Dynamics, and Materials Conference, LaJolla, CA, April 1993, paper AIAA-93-1361-CP, pp. 576-586.
7. Fenn, R. C., Downer, J. R., Bushko, D. A., Gondhalekar, V., and Ham, N. D., "Terfenol-D Driven Flaps for Helicopter Vibration Reduction", Paper # 0-8194-1150-7/93, SPIE Vol. 1917 Smart Structures and Intelligent Systems (1993), pp. 407-418.
8. Lemnios and Smith, "An Analytical Evaluation of the Controllable Twist Rotor Performance and Dynamic Behavior", Report R-794, Kaman Aerospace Corp., 1972.
9. Galvagni, J., Rawal, B., "A Comparison of Piezoelectric and Electrostrictive Actuator Stacks", Paper 1543-50, SPIE Vol. 1543 Active and Adaptive Optical Components", 1991, pp 296-300.
10. Liang, C, Sun, F. P., Rogers, C. A., "Coupled Electro-Mechanical Analysis of Piezoelectric Ceramic Actuator Driven Systems - Determination of Actuator Power Consumption and System Energy Transfer", Proceedings of SPIE 1993 North American Conference on Smart Structures and Materials, Albuquerque, 1-4 Feb., 1993, pp. 286-298
11. Liang, C, Sun, F. P., Rogers, C. A., "An Investigation of the Energy Consumption and Conversion of Piezoelectric Actuators Integrated in Active Structures", Proceedings of the 1992 IEEE Conference, Tucson, AZ, 16-19 Dec. 1992.
12. Anon., "Products for Micropositioning", Polytech PI, Inc., 23 Midstate Dr., # 104, Auburn MA 01501, 1994.
13. Lazarus, K. B., Ceawley, E. F., Bohlmann, J. D., "Static Aeroelastic Control Using Strain Actuated Adaptive Structures", First Joint U. S./Japan Conference on Adaptive Structures, Nov. 13-15, 1990, Maui, Hawaii, Technomic Pub. Co., Inc., pp. 197-224.
14. Song, O., Librescu, L., and Rogers, C. A., "Static Aeroelastic Behavior of Adaptive Aircraft Wing Structures Modelled as Composite Thin-Walled Beams", Paper 91-144, Workshop on Smart Materials Systems and Structures, Aachen, Germany, June 6, 1991.
15. Ehlers, S. M., and Weisshaar, T. A., "Static Aeroelastic Behavior of an Adaptive I aminated Piezoelectric Composite Wing", AIAA Paper 90-1078-CP, Proceedings of AIAA/ASME/ASCE/AHS/ASC 31st Structures, Structural Dynamics, and Materials Conference, Long Beach, CA, April 2-4, 1990, Part 3, pp. 1611-1623.
16. Librescu, L., Rogers, C. A., and Song, O., "Static and Dynamic Behavior of Adaptive Aircraft Wing Structures Modelled as Composite Thin-Walled Beams", Proceedings of the 6th Japan-US Conference on Composite Materials, Grosvenor Resort, Orlando, Florida, June 22-24, 1992, Technomic Pub. Co., Inc., 1992, pp. 713-724.
17. Song, O., Librescu, L., and Rogers, C. A., "Application of Adaptive Technology to Static Aeroelastic Control of Wing Structures", AIAA Journal, Vol. 30, No. 12, Dec. 1993, pp. 2882-2889.
18. Nitzsche, F., and Breitbach, E., "Study of Feasibility of Using Adaptive Structures in the Attenuation of Vibration Characteristics of Rotary Wings", AIAA paper No. AIAA-92-2452-CP, 1992.
19. Nitzsche, F., and Breitbach, E., "Individual Blade Control of Hinged Blades Using Smart Structures", 18th European Rotorcraft Forum, Avignon, France, Sept. 15-17, 1992, pp. E6.1-E6.13.
20. Nitzsche, F., "Modal Sensors and Actuators for Individual Blade Control", Proceedings of the AIAA/ASME/ASCE/AHS/ASC 34st Structures, Structural Dynamics, and Materials Conference, LaJolla, CA, April 1993, paper AIAA-93-1703-CP, pp. 3507-3516.
21. Chen, P. C., and Chopra, I., "A Feasibility Study to Build a Smart Rotor: Induced-Strain Actuation of Airfoil Twisting Using Piezoceramics", Proceedings of the 1993 North American Conference on Smart Structures and Materials, paper 1917-20, Hyatt Regency Hotel, Albuquerque, New Mexico, 31 January - 4 February 1993.
22. Chen, P. C., and Chopra, I., "Induced-Strain Actuation of Composite Beams and Rotor Blades with Embedded Piezoceramic Elements", 1st Workshop on Smart Structures, University of Texas, Arlington, TX, Sept. 22-24, 1993 (in press)
23. Park, C, Walz, C, and Chopra, I., "Bending and Torsion Models of Beam with Induced Strain Actuators", Proceedings of the 1993 North American Conference on Smart Structures and Materials, Hyatt-Regency Hotel, Albuquerque, New Mexico, 31 Jan.-2 Feb. 1993, SPIE Vol. 1917, pp. 193-216.
24. Straub, F. K., AND Charles, B. D., "Preliminary Assessment of Advanced Rotor/Control System Concepts (ARCS) ", McDonnell Douglas Helicopter Co., Aviation Applied Technology Directorate, US Army Aviation Systems Command, Fort Eustis, VA, USAAVSCOM TR 90-D-3, August 1990.
25. Phillips, N. B., and Murphy, M. R., "Preliminary Assessment of Advanced Rotor/Control System Concepts", Bell Helicopter Textron Inc., Aviation Applied Technology Directorate, US Army Aviation Systems Command, fort Eustis, VA, USAAVSCOM TR 90-D-18, August 1990.
26. Millott, T. A., and Friedmann, P. P.", Vibration Reduction in Helicopter Rotors Using an Active Control Surface Located on the Blade", Proceedings of the AIAA/ASME/ASCE/AHS/ASC 33rd Structures, Structural Dynamics, and Materials Conference, Dallas, TX, April 1992, paper AIAA-92-2451-CP, pp. 1975-1988.
27. Millott, T. A., and Friedmann, P. P., "The Practical Implementation of an Actively Controlled Flap to Reduce Vibrations in Helicopter Rotors", Proceeding of the American Helicopter Society 49th Annual Forum, St. Louis, Missouri, May 19-21, 1993, p. p. 1079-1092.
28. Spangler, R. L. Jr., and Hall, S. R., "Piezoelectric Actuators for Helicopter Rotor Control", Report # SSL 1-89, SERC 14-90, MIT Space Engineering Research Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, Jan., 1989.
29. Spangler, R. L., Jr., and Hall, S. R., "Piezoelectric Actuators for Helicopter Rotor Control", Proceedings of the AIAA/ASME/ASCE/AHS/ASC 31st Structures, Structural Dynamics, and Materials Conference, Long Beach, CA, April 1990, paper AIAA-90-1076-CP, pp. 1589-1599.
30. Hall, S. R., private communication, MIT Space Engineering Research Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, Nov. 1993.
31. Samak, D. K., and Chopra, I., "A Feasibility Study to Build a Smart Rotor: Trailing Edge Flap Actuation", Proceedings of the 1993 North American Conference on Smart Structures and Materials, paper 1917-20, Hyatt Regency Hotel, Albuquerque, New Mexico, 31 January - 4 February 1993.
32. Walz, C, and Chopra, I., "Design, Fabrication, and Testing of a Scaled Rotor with Smart Trailing Edge Flaps", 1st Workshop on Smart Structures, University of Texas, Arlington, TX, Sept. 22-24, 1993 (in press).
33. Cook, G., private communication, EDO Corporation, 2645 South 300 W, Salt Lake City, Utah 84114, Nov. 1993.
34. Lambert, M (Ed.), "Jane's All the World's Aircraft, 1993-94", Jane's Information Group Inc., Alexandria, Va 22314-1651, 1993.
35. Fabunmi, J. A., "Control of Helicopter Rotorblade Aerodynamics", NASA CR 4350, July 1991.
36. Giurgiutiu, V., Chaudhry, Z., Rogers, C., "The Use of Induced Strain Actuators for Rotor Blade Active Vibration Control", CIMSS Report # 93-AVC-002, Center for Intelligent Material Systems and Structures, Virginia Polytechnic Institute and State University, Blacksburg VA 24061-0261, Dec. 1993 (in press).
37. Song, O., Librescu, L., "Vibration Behavior of Rotating Helicopter Blades Incorporating Adaptive Capabilities", Proceedings ofSPIE 1993 North American Conference on Smart Structures and Materials, Albuquerque, 1-4 Feb., 1993, pp. 354-365
38. Kube, R., "New Aspects of Higher Harmonic Control on a Four-Bladed Hingeless Model Rotor", Journal of the American Helicopter Society, July 1992, p. p. 61-68
39. Anon., "PKI Ceramics Polycrystalline Piezoelectric Elements", Piezo Kinetics Inc., Bellefonte, PA 16823.
40. Clark, A. E., "High Power Rare Earth Magnetostrictive Materials", in Proceedings of the Conference on Recent Advances in Adaptive and Sensory Materials, Technomic Publishing, 1992, pp. 387-397.