Nanoindentation and indentation creep of polymeric materials

Polymer Tribology

Volumn , Issue , 2009, Pages 141-194

  Zeng, Kaiyang ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIC FORCE MICROSCOPY; CREEP; ELASTIC MODULI; HARDNESS; POLYMERS; SOLDERING ALLOYS; UNCERTAINTY ANALYSIS; UNLOADING;

EXPERIMENTAL TECHNIQUES; INDENTATION CREEP EXPERIMENTS; LOAD-DISPLACEMENT DATA; NANOINDENTATION ANALYSIS; NANOINDENTATION EXPERIMENTS; NANOINDENTATION TECHNIQUES; NANOINDENTATION TESTS; TIME-DEPENDENT PROPERTIES;

NANOINDENTATION;

EID: 84967488895     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1142/9781848162044_0005     Document Type: Chapter

References (76)

1. J. B. Pethica, R. Hutchings and W. C. Oliver, Philo. Mag. A, 48, 593, (1983).
2. W. C. Oliver, R. Hutchings and J. B. Pethica, In Microindentation Techniques in Materials Science and Engineering, P. J. Blau and B. R. Lawn, Eds., Am. Soc. Testing & Mater., ASTM STP 889, (1986), p.90.
3. W. C. Oliver, Mat. Res. Soc., Bull., 11, 15, (1986).
4. G. M. Pharr, Mater. Sci. Eng. A, 253, 151, (1998).
5. W. D. Nix, Mater. Sci. Eng., A, 234-236, 37, (1997).
6. Special issue: Nanoindentation: From Angstroms to Microns, J. Mater. Res., 14, 6, (1999).
7. Special Issue: Fundamentals and Applications of Instrumented Indentation in Multidisciplinary Research, J. Mater. Res., 19, Issue 1, (2004).
8. Special Issue: International Indentation Workshop, Philo. Mag. A, 74, Issue 5, (1996).
9. Special Issue: Second International Indentation Workshop, Phil. Mag., A, 82, Issue 10, (2002).
10. A. C. Fischer-Cripps, Nanoindentation, (Springer, New York, 2002).
11. B. Bhushan, Handbook of Micro/Nano Tribology, (CRC Press, Boca Raton, FL, 1995).
12. Mat. Res. Soc. Symp. Proc., Fundamentals of Nanoindentation and Nanotribology, N. R. Moody, W. W. Gerberich, N. Burnham, and S.P. Baker, Eds., Mat. Res. Soc., (1998), Vol. 522.
13. Mat. Res. Soc. Symp. Proc., Fundamentals of Nanoindentation and Nanotribology II, S. P. Baker, R. F. Cook, S. G. Corcoran, and N. R. Moody (Eds), Mat. Res. Soc., (2001), Vol. 649.
14. D. T. Smith, Eds., Conference Proceedings: International Workshop on Instrumented Indentation, San Diego, CA, April, 22-23, 1995, NIST Special Publication 896, NIST, (1996).
15. F. J. Baltá Calleja and S. Fakirov, Microhardness of Polymers, (Cambridge Univ. Press, Cambridge, 2000)
16. K. Y. Zeng, In Handbook of Theoretical and Compoutational Nanotechnology, M. Rieth and W. Schommers Eds., American Scientific Publisher, Vol. 4, (2006), p. 387.
17. E. S. Berkovich, Ind. Diamond Rev., 11, 129, (1951).
18. I. N. Sneddon, Int. J. Eng. Sci., 3, 47, (1965).
19. K. L. Johnson, J. Mech. Phys. Solids, 18, 115, (1970).
20. M. F. Doerner and W. D. Nix, J. Mater. Res., 1, 601, (1986).
21. W. C. Oliver and G. M. Pharr, J. Mater. Res., 7, 1564, (1992).
22. S. P. Baker, in Thin Films: Stresses and Mechanical Properties IV, P. H. Townsed, T. P. Weihs, J. E. Sanches, Jr., and P. Børgesen, Eds., Mat. Res. Soc. Proc., Vol. 308, Mat. Res. Soc., (Pittsburgh, PA, 1993), p. 209.
23. S. P. Baker and T. P. Weihs, in Thin Films: Stresses and Mechanical Properties IV, P. H. Townsed, T. P. Weihs, J. E. Sanches, Jr. and P. Børgesen, Eds., Mat. Res. Soc. Proc., Vol. 308, Mat. Res. Soc., (Pittsburgh, PA, 1993), p. 217.
24. R. B. King, Int. J. Solids Structures, 23, 1657, (1987).
25. P.-L. Larsson, A. E. Giannakopoulos, E. Söderlund, D. J. Rowcliffe and R. Vestergaard, Int. J. Solids Structures, 33, 221, (1996).
26. S. M. Chia, K. W. Leong, J. Li, X. Xu, K. Y. Zeng, P. N. Er, S. Gao, and H. Yu, Tissue Engg., 6, 481, (2000).
27. K. Zeng and C.-H. Chiu, Acta Mater., 49, 3539, (2001).
28. L. Shen, I. Y. Phang, L. Chen, T. X. Liu and K. Y. Zeng, Polymer, 45, 3341, (2004).
29. M. H. Nai, C. T. Lim, K. Y. Zeng, and V. B. C. Tan, J. Meta. Nanocry. Mater., 23, 363, (2005).
30. K. Y. Zeng, Z.-K. Chen, L. Shen and B. Liu, Thin Solid Films, 477, 111, (2005).
31. L. Shen, I. Y. Phang, T. X. Liu, and K. Y. Zeng, Polymer, 45, 8221, (2004).
32. J. C. Huang, P. C. Lim, L. Shen, P. K. Pallathadka, K. Y. Zeng and C. B. He, Acta Mater., 53, 2395, (2005).
33. M. R. VanLandingham, J. S. Villarrubia, W. F. Guthrie and G. F. Meyers, Macromol. Symp., 167, 15, (2001).
34. M. R. VanLandingham, J. S. Villarrubia, and G. F. Meyers, ACS Polymer Preprints, 41, 1412, (2000).
35. B. J. Briscoe, L. Fiori, and E. Pelillo, J. Phys. D: Appl. Phys., 31, 2395, (1998).
36. P.-L. Larsson, and S. Carlson, Polymer Testing, 17, 49, (1998).
37. M. J. Mayo, R. W. Siegel, Y. Z. Liao and W. D. Nix, J. Mat. Res., 7, 793, (1992).
38. M. J. Mayo and W. D. Nix, Acta Metall. Mater., 36, 2183, (1988).
39. M. J. Mayo, R. W. Siegel, A. Narayanasamy and W. D. Nix., J. Mater. Res., 5, 1073, (1990).
40. V. Raman and R. Berriche, J. Mater. Res., 7, 627, (1992).
41. S. Shimizu, T. Yanagimoto and M. Sakai, J. Mater. Res., 14, 4075, (1999).
42. W. R. LaFontaine, B. Yost, R. D. Black and C. Y. Li, J. Mater. Res., 5, 2100, (1990).
43. L. Cheng, X. Xia, W. Yu, L. E. Scriven and W. W. Gerberich, J. Poly. Sci. B: Polym. Phys., 38, 10, (2000).
44. M. L. Oyen and R. F. Cook, J. Mater. Res., 18, 139, (2003).
45. S. Yang, Y.-W. Zhang and K. Y. Zeng, J. Appl. Phys., 95, 3655, (2004).
46. M. Sakai, S. Shimizu, N. Miyajima, Y. Tanabe, and E. Yasuda, Carbon, 39, 605, (2001).
47. S.-P. Hannula, D. Stone and C.Y. Li, In Electronic Packaging Materials Science, E. A. Giess, K.-N. Tu and D. R. Uhlmann, Eds., Mat.Res.Soc.Proc., Vol.40, Mat. Res. Soc., (Pittsburgh, PA, 1985), p.217.
48. T. W. Wu, M. Moshref and P. S. Alexopoulos, Thin Solid Films, 187, 295, (1990).
49. X. Li and B. Bhushan, Mater. Charact., 48, 11, (2002).
50. X. Li and B. Bhushan, Script Mater., 42, 929, (2000).
51. X. Li and B. Bhushan, Thin Solid Films, 377-378, 401, (2000).
52. J.-L. Loubet, B. N. Lucas and W. C. Oliver, in Conference Proceedings: International Workshop on Instrumented Indentation, San Deigo, CA, April 22-23, 1995, NIST Special Publication 896, D. T. Smith, Ed., (NIST, USA, 1996), p.31.
53. B. J. Briscoe and K. S. Sebastian, Proc. Roy. Soc. Lond., A 452, 439 (1996).
54. T. H. Hyde, K. A. Yelnia and A. A. Becker, Int. J. Mech. Sci., 35, 451, (1993).
55. J. C. M. Li, Mat. Sci. Eng. A, 322, 23, (2002).
56. J. Kolarík and A. Pegoretti, Polymer Testing, 23, 113, (2004).
57. C. A. Tweedie and K. J. Van Vliet, J. Mater. Res., 21, 1576, (2006).
58. F. Garofalo, Fundmentals of Creep and Creep-Rupture in Metals, MacMillan, New York, (1965).
59. H. Kraus, Creep Analysis, John Wiley & Sons, (1982).
60. C. Y. Zhang, Y.-W. Zhang, and K. Y. Zeng, J. Mater. Res., 19, 3052, (2004).
61. C. Y. Zhang, Y.-W. Zhang, K. Y. Zeng, and L. Shen, J. Mater. Res., 20, 1597, (2005).
62. C. Y. Zhang, Y.-W. Zhang, K. Y. Zeng, L. Shen and Y. Y. Wang, J. Mater. Res., 21, 2991, (2006).
63. C. Y. Zhang, Y. W. Zhang, K. Y. Zeng and L. Shen, Philos. Mag., 86, 4487 (2006).
64. G. M. Pharr and A. Bolshakov, J. Mater. Res., 17, 2660, (2002).
65. M. Sakai, J. Mater. Res., 18, 1631, (2003).
66. M. L. Oyen, Acta Materialia, 55, 3633, (2007).
67. H. Lu, B. Wang, J. Ma, G. Huang, and H. Viswanathan, Mech. Time-Depend. Mater., 7, 189, (2003).
68. E. H. Lee and J. R. M. Radok, Trans. ASME, E: J. App. Mech., 27, 438, (1960).
69. W. H. Yang, Trans. ASME E: J. App. Mech., 33, 395, (1966).
70. T. C. T. Ting, Trans. ASME E: J. App. Mech., 33, 845, (1966).
71. T. C. T. Ting, Trans. ASME, E: J. App. Mech., 35, 248, (1968).
72. R. J. Roberts, R. C. Rowe, and P. York, J. Mater. Sci., 29, 2289, (1994).
73. B. Beake, J. Phys. D: App. Phys., 39, 4478, (2006).
74. L. Anand and N. M. Ames, Int. J. Plasticity, 22, 1123, (2006).
75. Y. T. Cheng, C.-M. Cheng and W. Ni, Mater. Sci. Eng., A, 423, 2, (2006).
76. D. Tranchida, S. Piccarolo, and M. Soliman, Macromolecules, 39, 4547, (2006).