The effect of sulfonated polysulfone on the compatibility and structure of polyethersulfone-based blend membranes

Journal of Membrane Science

Volumn 513, Issue , 2016, Pages 1-11

  Li, Shiwen ^a   Cui, Zhenyu ^a   Zhang, Lei ^a   He, Benqiao ^a   Li, Jianxin ^a  

^a TIANJIN POLYTECHNIC UNIVERSITY   (China)

Author keywords

Compatibility; Polyethersulfone (PES); Polymer blend; Sulfonated polysulfone (SPSf); Ultrafiltration (UF) membrane

Indexed keywords

DIFFERENTIAL SCANNING CALORIMETRY; HYDROPHILICITY; POLYMER BLENDS; SCANNING ELECTRON MICROSCOPY; SURFACE SEGREGATION; THERMODYNAMICS;

COMPATIBILITY; MEMBRANE HYDROPHILICITY; PHASE INVERSION PROCESS; POLYETHERSULFONES; STRUCTURE AND PROPERTIES; SULFONATED POLYSULFONE; THERMODYNAMICS AND KINETICS; ULTRAFILTRATION MEMBRANES;

MEMBRANES;

POLYETHERSULFONE; POLYSULFONE; SULFONATED POLYSULFONE; UNCLASSIFIED DRUG;

ARTICLE; BIOFOULING; DIFFERENTIAL SCANNING CALORIMETRY; DIFFUSION; HYDRAULIC PERMEABILITY; HYDROGEN BOND; HYDROPHILICITY; IMMERSION; MEMBRANE; MEMBRANE FORMATION; MEMBRANE STRUCTURE; PHASE SEPARATION; POLYETHERSULFONE BASED BLEND MEMBRANE; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SULFONATION; THERMODYNAMICS; WATER PERMEABILITY; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 84963725216     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2016.04.035     Document Type: Article

References (39)

1. Akthakul A., MacDonald W.F., Mayes A.M. Noncircular pores on the surface of asymmetric polymer membranes: evidence of pore formation via spinodal demixing. J. Membr. Sci. 2002, 208:147-155.
2. Zhao S., Wang Z., Wang J.X., Yang S.H., Wang S.C. PSf/PANI nanocomposite membrane prepared by in situ blending of PSf and PANI/NMP. J. Membr. Sci. 2011, 376:83-95.
3. Barth C., Goncalves M.C., Pires A.T.N., Roeder J., Wolf B.A. Asymmetric polysulfone and polyethersulfone membranes: effects of thermodynamic conditions during formation on their performance. J. Membr. Sci. 2000, 169:287-299.
4. Yang Y.N., Wu J., Zheng Q.Z., Chen X.S., Zhang H.X. The research of rheology and thermodynamics of organic-inorganic hybrid membrane during the membrane formation. J. Membr. Sci. 2008, 311:200-207.
5. Blanco J.F., Sublet J., Nguyen Q.T., Schaetzel P. Formation and structure studies of different polysulfones-based membranes made by wet phase inversion process. J. Membr. Sci. 2006, 283:27-37.
6. Barzin J., Sadatnia B. Theoretical phase diagram calculation and membrane morphology evaluation for water/solvent/polyethersulfone systems. Polymer 2007, 48:1620-1631.
7. 2 fillers on the morphologies and properties of PSF UF membrane. J. Membr. Sci. 2007, 288:231-238.
8. Guillen G.R., Pan Y., Li M. Preparation and characterization of membranes formed by non-solvent induced phase separation: a review. Ind. Eng. Chem. Res. 2011, 50:3798-3817.
9. Zhang Z.H., An Q.F., Liu T., Zhou Y., Qian J.W., Gao C.J. Fabrication of polysulfone ultrafiltration membranes of a density gradient cross-section with good anti-pressure stability and relatively high water flux. Desalination 2011, 269:239-248.
10. Qin P.Y., Chen C.X., Han B.B., Takuji S., Li J.D., Sun B.H. Preparation of poly(phthalazinone ether sulfone ketone) asymmetric ultra-filtration membrane: II. The gelation process. J. Membr. Sci. 2006, 268:181-188.
11. Cai Y., Li J.X., Guo Y.G., Cui Z.Y., Zhang Y.Y. In-situ monitoring of asymmetric poly(ethylene-co-vinyl alcohol) membrane formation via a phase inversion process by an ultrasonic through-transmission technique. Desalination 2011, 283:25-30.
12. Manea C., Mulder M. Characterization of polymer blends of polyethersulfone/sulfonated polysulfone and polyethersulfone/sulfonated polyetheretherketone for direct methanol fuel cell applications. J. Membr. Sci. 2002, 206:443-453.
13. Fang X.F., Li J.S., Li X., Sun X.Y., Shen J.Y., Han W.Q., Wang L.J. Polyethyleneimine, an effective additive for polyethersulfone ultrafiltration membrane with enhanced permeability and selectivity. J. Membr. Sci. 2015, 476:216-223.
14. Zhang J., Wang Q.Y., Wang Z.W., Zhu C.W., Wu Z.C. Modification of poly (vinylidene fluoride)/polyethersulfone blend membrane with polyvinyl alcohol for improving antifouling ability. J. Membr. Sci. 2014, 466:293-301.
15. Ng C.W.A., MacKnight W.J. Ionomeric blends of poly (ethyl acrylate-co-4-vinylpyridine) with metal-neutralized sulfonated poly (ethylene terephthalate). 4. Effects of counterions. Macromolecules 1996, 29:2421-2429.
16. Deimede V., Voyiatzis G.A., Kallitsis J.K. Miscibility behavior of polybenzimidazole/sulfonated polysulfone blends for use in fuel cell applications. Macromolecules 2000, 33:7609-7617.
17. Bowen W.R., Doneva T.A., Yin H.B. Polysulfone-sulfonated poly (ether ether) ketone blend membranes: systematic synthesis and characterization. J. Membr. Sci. 2001, 181:253-263.
18. Ma F., Zhang Y.Z., Ding X.L., Lin L.G., Li H. Preparation and characterization of PES/SPSF blend ultrafiltration membrane. Adv. Mater. Res. 2011, 221:37-42.
19. Ma F., Ye H., Zhang Y.Z., Ding X.L., Lin L.G., Zhao L.Z., Li H. The effect of polymer concentration and additives of cast solution on performance of polyethersulfone/sulfonated polysulfone blend nanofiltration membranes. Desalin. Water Treat. 2014, 52:618-625.
20. Ma X.L., Su Y.L., Sun Q., Wang Y.Q., Jiang Z.Y. Preparation of protein-adsorption-resistant polyethersulfone ultrafiltration membranes through surface segregation of amphiphilic comb copolymer. J. Membr. Sci. 2007, 292:116-124.
21. Huang Y.H., Xiao C.B. Miscibility and mechanical properties of quaternized polysulfone/benzoyl guar gum blends. Polymer 2007, 48:371-381.
22. Brodsky P.H. Compatibility in Polymer Blends 1969, Cornell University, Ithaca, New York.
23. Utracki L.A., Favis B.D. Polymer alloys and blends. Handbook of Polymer Science and Technology 1989, 121-202. Marcel Dekker INC, New York. N.P. Chememisinoff (Ed.).
24. Schneier B. Polymer compatibility. J. Appl. Polym. Sci. 1973, 17:3175-3185.
25. Hendrix K., Vaneynde M., Koeckelberghs G. Synthesis of modified poly(ether ether ketone) polymer for the preparation of ultrafiltration and nanofiltration membranes via phase inversion. J. Membr. Sci. 2013, 447:96-106.
26. Zhu S., Shi M.Q., Zhao S., Wang Z., Wang J.X., Wang S.C. Preparation and characterization of a polyethersulfone/polyaniline nanocomposite membrane for ultrafiltration and as a substrate for a gas separation membrane. RSC Adv. 2015, 5:27211-27223.
27. 2-g-HEMA and its antifouling characteristics. J. Membr. Sci. 2013, 436:163-173.
28. Aouachria K., Belhaneche-Bensemra N. Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysis. Polym. Test. 2006, 25:1101-1108.
29. Cakar F., Sakar D., Cankurtaran O., Karaman F. The evaluation of miscibility of blends of poly (ether imide) (Ultem® 1000) and a copolyester of bisphenol-A with terephthalic and isophthalic acid (Ardel® D-100) by viscosimetry. Eur. Polym. J. 2007, 43:507-513.
30. Hołda A.K., Aernouts B., Saeys W., Vankelecom I.F.J. Study of polymer concentration and evaporation time as phase inversion parameters for polysulfone-based SRNF membranes. J. Membr. Sci. 2013, 442:196-205.
31. Laque W.E., Ronneberg C.E. A study of the decarboxylation of trichloroacetic acid in solutions of water and dimethylsulfoxide. Ohio J. Sci. 1970, 70:97-106.
32. Kim H.J., Fouda A.E., Jonasson K. In situ study on kinetic behavior during asymmetric membrane formation via phase inversion process using Raman spectroscopy. J. Appl. Polym. Sci. 2000, 75:135-141.
33. Wang Y.Q., Su Y.L., Ma X.L., Sun Q., Jiang Z.Y. Pluronic polymers and polyethersulfone blend membranes with improved fouling-resistant ability and ultrafiltration performance. J. Membr. Sci. 2006, 283:440-447.
34. Wang D.M., Lai J.Y. Recent advances in preparation and morphology control of polymeric membranes formed by non-solvent induced phase separation. Curr. Opin. Chem. Eng. 2013, 2:229-237.
35. Lin K.Y., Wang D.M., Lai J.Y. Non-solvent-induced gelation and its effect on membrane morphology. Macromolecules 2002, 35:6697-6706.
36. Zhao Y.H., Wee K.H., Bai R. Highly drophilic and low-protein-fouling polypropylene membrane prepared by surface modification with sulfobetaine-based zwitterionic polymer through a combined surface polymerization method. J. Membr. Sci. 2010, 362:326-333.
37. Li J.X., Sanderson R.D., Chai G.Y., Hallbauer D.K. Development of an ultrasonic technique for in situ investigating the properties of deposited protein during crossflow ultrafiltration. J. Colloid Interface Sci. 2005, 284:228-238.
38. Suki A., Fane A.G., Fell C.J.D. Flux decline in protein ultrafiltration. J. Membr. Sci. 1984, 21:269-283.
39. Kelly S.T., Zydney A.L. Mechanisms for BSA fouling during microfiltration. J. Membr. Sci. 1995, 107:115-127.