Aircraft anti-icing and deicing techniques and modeling

34th Aerospace Sciences Meeting and Exhibit

Volumn , Issue , 1996, Pages

  Thomas, Scott K ^a   Cassoni, Robert P ^a   Macarthur, Charles D ^b  

^a Wright State University   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSPACE ENGINEERING; SNOW AND ICE REMOVAL;

AIRCRAFT FLIGHT; ANTI-ICING; ICE ACCRETION; STATE OF THE ART;

AIRCRAFT ACCIDENTS;

EID: 84962173567     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (83)

1. Sparaco, P., 1994, "Swedish Crash Prompts Clear-Ice Guidelines," Aviation Week & Space Technology, Jan. 10, pp. 49-50.
2. Stankov, B., and Bedard, A., Jr., 1994, "Remote Sensing Observations of Winter Aircraft Icing Conditions: A Case Study," J. Aircraft, Vol. 31, pp. 79-89.
3. Heinrich, A., et al., 1991, Aircraft Icing Handbook, FA A Technical Center Publication, Atlantic City, N.J.
4. Bragg, M., Gregorek, G., and Lee, J., 1986, "Airfoil Aerodynamics in Icing Conditions," J. Aircraft, Vol. 23, pp. 76-81.
5. Griffiths, R., and Korkan, K., 1992, "Study of Theoretical and Wind Tunnel Results on Flight Performance Degradation due to Leading Edge Rime Ice Accretion," Proc. AIAA SOth Aerospace Sciences Meeting, AIAA-92-0038.
6. MacArthur, C., 1983, "Numerical Simulation of Airfoil Ice Accretion," Proc. AIAA 21st Aerospace Sciences Meeting, AIAA-83-0112.
7. MacArthur, C., Keller, J., and Luers, J., 1982, "Mathematical Modeling of Ice Accretion on Airfoils," Proc. AIAA 20th Aerospace Sciences Meeting, AIAA-82-0284.
8. Ruff, G., et al., 1986, "User's Guide for the NASA Lewis Ice Accretion Prediction Code (LEWICE)," Sverdrup Technology, Inc., LeRC Group.
9. Yoeman, K., 1989, "Selection of the Critical Icing/Flight Case for an Unprotected Airfoil," Proc. AIAA 27th Aerospace Sciences Meeting, AIAA-89-0757.
10. Ranaudo, R., Batterson, J., Reehorst, A., Bond, T., and O'Mara, T., 1991, "Effects of Horizontal Tail Ice on Longitudinal Aerodynamic Derivatives," J. Aircraft, Vol. 28, pp. 193-199.
11. Weisend, N., Jr., 1989, "Design of an Advanced Pneumatic Deicer for the Composite Rotor Blade," J. Aircraft, Vol. 26, pp. 947-950.
12. Scavuzzo, R., Chu, M., and Kellackey, C., 1991, "Impact Ice Stresses in Rotating Airfoils," J. Aircraft, Vol. 28, pp. 450-455.
13. Horne, T., 1984, "Weeping Wings," AO PA Pilot, January issue, pp. 36-38.
14. Newman, R., 1985, "Flight Testing a Liquid Ice Protection System on a Single-Engine Airplane," Proc. General Aviation Aircraft Meeting and Exposition, SAE 850923.
15. Albright, A., 1985, "A Summary of NASA's Research on the Fluid Ice Protection System," Proc. AIAA 23rd Aerospace Sciences Meeting, AIAA-85-0467.
16. Kohlman, D., Schweikhard, W., and Evanich, P., 1982, "Icing Tunnel Tests of a Glycol-Exuding Porous Leading Edge Ice Protection System," J. Aircraft, Vol. 19, pp. 647-654.
17. Rosenthal, H., Nelepovitz, D., and Rockholt, H., 1988, "Deicing of Aircraft Turbine Engine Inlets," DOT/FAA/CT-87/37, Final Report, Rohr Industries, Inc.
18. Anon., 1981, "Anti-Icing Equipment for Aircraft, Heated Surface Type. General Specifications for," MIL-A-9482, 2 Sept. 1954, amended 2 April 1981.
19. Yaslik, A., DeWitt, K., and Keith, T., Jr., 1992, "Further Developments in Three-Dimensional Numerical Simulation of Electrothermal Deicing Systems," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0528.
20. Fanelli, M., Wright, W., Masiulaniec, K., DeWitt, K., Keith, T., Jr., Cole, R., Wilson, T., Bowen, K., and Martin, C., 1992, "Experimental and Numerical Investigation of Anti-Icing Phenomena on a NACA 0012 Assembly," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0531.
21. Bond, T., Shin, J., and Mesander, G., 1991, "Advanced Ice Protection Systems Test in the NASA Lewis Icing Research Tunnel," Proc. 47th Annual Forum and Technology Display, NASA TM 103757.
22. Martin, C., and Putt, J., 1992, "Advanced Pneumatic Impulse Ice Protection System (PUP) for Aircraft," J. Aircraft, Vol. 29, pp. 714-716.
23. Zumwalt, G., Schrag, R., Bernhart, W., and Friedberg, R., 1988, "Electro-Impulse De-Icing Testing Analysis and Design," NASA CR-4175.
24. Gien, P., 1990, "Flexural Waves Induced by Electro-Impulse Deicing Forces," Proc. 13th ASME Annual Energy-Sources Technology Conf., New Orleans, LA, pp. 267-271.
25. Ross, R., 1988, "Electro-Impulse Deicing of the NASA Lewis Altitude Wind Tunnel Turning Vanes," J. Aircraft, Vol. 25, pp. 499-501.
26. Schrag, R., and Zumwalt, G., 1984, "ElectroImpulse Deicing: Concept and Electrodynamic Studies," Proc. AIAA 22nd Aerospace Sciences Meeting, AIAA-84-0021.
27. Bernhart, W., and Zumwalt, G., 1984, "Electro-Impulse Deicing: Structured Dynamic Studies, Icing Tunnel Tests and Applications," Proc. AIAA 22nd Aerospace Sciences Meeting, AIAA-84-0022.
28. Zumwalt, G., Friedberg, R., and Schwartz, J., 1989, "Electro-Impulse De-Icing Research: Fatigue and Electromagnetic Interference Tests," FAA Report DOT/FAA/CT-88/27.
29. Zieve, P., Huffer, B., and Ng, J., 1989, "Electromagnetic Emissions from a Modular Low Voltage Electro-Impulse De-Icing System," FAA Report DOT/FAA/CT-88/31. Also in Proc. AIAA 27th Aerospace Sciences Meeting, AIAA-89-0758.
30. Zumwalt, G., 1991, "Electromagnetic Emissions from an Electro-Impulse Deicing System in a Composite Wing Equipped with Lightning Protection," FAA Report DOT/FAA/CT-TN90/32.
31. Zieve, P., Ng, J., and Friedberg, R., 1990, "Suppression of Radiating Harmonics in Electro-Impulse Deicing Systems," FAA Report DOT/FA A/CT-TN90/33.
32. Smith, S., and Zieve, P., 1990, "Thin Film Eddy Current Impulse Deicer," Proc. AIAA 28th Aerospace Sciences Meeting, AIAA-90-0761.
33. Nordwall, B., 1987, "NASA Tests Electro-Expulsive Deicer That Could Protect F/A-18 Engines," Aviation Week & Space Technology, Aug. 3, pp. 89-93.
34. Theodorseu, T., 1932, "Theory of Wing Sections of Arbitrary Shape," NACA Report No. 411.
35. Theodorsen, T., and Garrick, I., 1933, "General Potential Theory of Arbitrary Wing Sections," NACA Report No. 452.
36. Bragg, M., 1982, "Rime Ice Accretion and its Effect on Airfoil Performance," NASA CR-165599.
37. Bragg, M., and Gregorek, G., 1982, "Aerodynamic Characteristics of Airfoils with Ice Accretions," Proc. AIAA 20th Aerospace Sciences Meeting, AIAA-82-0282.
38. Bragg, M., and Gregorek, G., 1983, "An Analytical Evaluation of the Icing Properties of Several Low and Medium Speed Airfoils," Proc. AIAA 21st Aerospace Sciences Meeting, AIAA-83-0109.
39. Bragg, M., 1984, "Effect of Geometry on Airfoil Icing Characteristics," J. Aircraft, Vol. 21, pp. 505-511.
40. Bragg, M., 1985, "Predicting Rime Ice Accretion on Airfoils," AIAA Journal, Vol. 23, pp. 381-387.
41. Miller, T., Korkan, K., and Shaw, R., 1987, "Analytical Determination of Propeller Performance Degradation due to Ice Accretion," J. Aircraft, Vol. 25, pp. 768-775.
42. Smith, A., 1990, "The Panel Method: Its Original Development," AIAA Applied Computational Aerodynamics, pp. 3-17.
43. Ruff, G., and Berkowitz, B., 1990, "User's Manual for the NASA Lewis Ice Accretion Prediction Code (LEWICE)," NASA CR 185129.
44. Cebeci, T., 1989, "Calculation of Flow Over Iced Airfoils," AIAA Journal, Vol. 27, pp. 853-861.
45. Hess, J., and Valarezo, W., 1987, "Application of an Advanced Panel Method to Aerodynamic Problems of Aircraft Design," Panel Methods in Fluid Mechanics with Emphasis on Aerodynamics; Proc. 3rd GAMM-Seminar, Kiel, Federal Republic of Germany, pp. 79-90.
46. Hess, J., and Smith, A., 1966, "Calculation of Potential Flow about Arbitrary Bodies," Progress in Aeronautical Sciences, Vol. 8, pp. 1-138, Pergamon, Oxford.
47. Frost, W., Chang, H., and Kimble, K., 1982, "Particle Trajectory Computer Program for Icing Analysis of Axisymmetric Bodies," NASA-CR-189134.
48. Hedde, T., and Guffond, D., 1992, "Development of a Three-Dimensional Icing Code, Comparison with Experimental Shapes," Prpc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0041.
49. Shapiro, A., 1953, The Dynamics and Thermodynamics of Compressible Fluid Flow, Vol. 1, Wiley, New York.
50. Potapczuk, M., 1992, "LEWICE/E: An Euler Based Ice Accretion Code," Proc. AIAA 80th Aerospace Sciences Meeting, AIAA-92-0037.
51. Cebeci, T., Chen, H., and Alemdaroglu, N., 1991, "Fortified LEWICE with Viscous Effects," J. Aircraft, Vol. 28, pp. 564-571.
52. Shin, J., Berkowitz, B., Chen, H., and Cebeci, T., 1994, "Prediction of Ice Shapes and Their Effect on Airfoil Drag," J. Aircraft, Vol. 31, pp. 263-270.
53. Paraschivoiu, I., Train, P., and Brahimi, M., 1994, "Prediction of Ice Accretion with Viscous Effects on Aircraft Wings," J. Aircraft, Vol. 31, pp. 855-861.
54. Anderson, D., Tannehill, J., and Pletcher, R., 1984, Computational Fluid Mechanics and Heat Transfer, Hemisphere, New York.
55. Scott, J., Hankey, W., Giessler, F., and Gielda, T., 1988, "Navier-Stokes Solution to the Flow-field over Ice Accretion Shapes," J. Aircraft, Vol. 25, pp. 710-716.
56. Kohlman, D., and Albright, A., 1983, "A Method of Predicting Flow Rates Required to Achieve Anti-Icing Performance with a Porous Leading Edge Ice Protection System," NASA-CR-168213.
57. Hansman, R., Jr., and Turnock, S.,1989, "Investigation of Surface Water Behavior During Glaze Ice Accretion," J. Aircraft, Vol.26, pp. 140-147.
58. Messinger, B.L., 1953, "Equilibrium Temperature of an Unheated Icing Surface as a Function of Airspeed," Journal of the Aeronautical Sciences, Vol. 20, pp. 29-41.
59. Al-Khalil, K., Keith, T., and De Witt, K., 1992, "Development of an Improved Model for Runback Water on Aircraft Surfaces," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0042.
60. Yamaguchi, K., and Hansman, R. Jr., 1992, "Heat Transfer on Accreting Ice Surfaces," J. Aircraft, Vol. 29, pp. 108-113.
61. Pais, M., Singh, S., and Zou, L., 1988, "Determination of the Local Heat Transfer Characteristics on Simulated Smooth Glaze Ice Accretions on a NACA 0012 Airfoil," Proc. AIAA 26th Aerospace Sciences Meeting, AIAA-88-0292.
62. Bragg, M., Gregorek, G., and Lee, J., 1986, "Airfoil Aerodynamics in Icing Conditions," J. Aircraft, Vol. 23, pp. 76-81.
63. Khodadoust, A., and Bragg, M., 1995, "Aerodynamics of a Finite Wing with Simulated Ice," J. Aircraft, Vol. 32, pp. 137-144.
64. Gray, V., 1964, "Prediction of Aerodynamic Penalties Caused by Ice Formations on Various Airfoils," NASA-TN-D-2166.
65. Flemming, R., and Lednicer, D., 1985, "High Speed Ice Accretion on Rotorcraft Airfoils," NASA-CR-3910.
66. Smetana, F., Summey, D., Smith, N., and Carden, R., 1975, "Light Aircraft Lift, Drag, and Moment Prediction-A Review and Analysis," NASA-CR-2523.
67. Eppler, R., and Somers, D., 1980, "A Computer Program for the Design and Analysis of Low-Speed Airfoils," NASA-TM-80210.
68. Bristow, D., 1980, "Multi-Element Airfoil Invis-cid Analysis and Design Program (Version 1): User Instructions," McDonnell Aircraft Co., St. Louis, MO.
69. Keith, T., Jr., DeWitt, K., Wright, W, and Masiulaniec, K., 1988, Overview of Numerical Codes Developed for Predicted Electrothermal De-Icing of Aircraft Blades," Proc. AIAA 26th Aerospace Sciences Meeting, AIAA-88-0288.
70. Wright, W., Keith, T., Jr., and DeWitt, K., 1988, "Transient Two-Dimensional Heat Transfer Through a Composite Body with Application to De-Icing of Aircraft Components," AIAA-88-22260.
71. Henry, R., 1992, "Development of an Electrothermal De-icing/Anti-Icing Model," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0526.
72. Huang, J., Keith, T., Jr., and DeWitt, K., 1991, "Numerical Simulation of an Electrothermal De-Iced Aircraft Surface Using the Finite Element Method," Proc. AIAA 29th Aerospace Sciences Meeting, AIAA-91-0268.
73. Wright, W., Keith, T., Jr., and DeWitt, K., 1992, "Numerical Analysis of a Thermal De-icer," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0527.
74. Huang, J., Keith, T., Jr., and DeWitt, K., 1991, "An Efficient Finite Element Method for Aircraft De-Icing Problems," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-92-0532.
75. Huang, J., Keith, T., Jr., and DeWitt, K., 1992, "Investigation of an Electrothermal De-Icer Pad Using a Three-Dimensional Finite Element Simulation," Proc. AIAA 30th Aerospace Sciences Meeting, AIAA-93-0532.
76. Al-Khalil, K., Keith, T., Jr., DeWitt, K., Nath-man, J., and Dietrich, D., 1989, "Thermal Analysis of Engine Inlet Anti-Icing Systems," Proc. AIAA 27th Aerospace Sciences Meeting, AIAA-89-0579.
77. Schneider, G., and Raw, M., 1984, "An Implicit Solution Procedure for Finite Difference Modeling of the Stefan Problem," AIAA Journal, Vol. 22, pp. 1685-1690.
78. Roelke, R., Keith, T., Jr., and DeWitt, K., 1992, "Efficient Numerical Solution of a One-Dimensional Electrothermal Deicer Pad," AIAA Journal of Aircraft, Vol. 25, pp. 1087-1105.
79. Lewis, G., 1986, "The Electrodynamic Operation of Electro-Impulse De-Icing Systems," Proc. AIAA 24th Aerospace Sciences Meeting, AIAA-86-0547.
80. Bernhart, W., and Schrag, R., 1989, "Eiec-troimpulse Deicing: Electrodynamic Solution by Discrete Elements," J. Aircraft, Vol. 26, pp. 547-553.
81. Zieve, P., 1988, "Low Voltage Electro-Impulse De-Icer," Proc. AIAA 26th Aerospace Sciences Meeting, AIAA-88-0021.
82. Scavuzzo, R., Chu, M., Woods, E., Raju, R., and Khatkhate, A., 1990, "Finite Element Studies of the Electro Impulse De-Icing System," J. Aircraft, Vol. 27, pp. 757-763.
83. Scavuzzo, R., Chu, M., and Ananthaswamy, V., "Influence of Aerodynamic Forces in Ice Shedding," J. Aircraft, Vol. 31, pp. 526-530.