Wood-plastic composites as potential applications of recycled plastics of electronic waste and recycled particleboard

Journal of Cleaner Production

Volumn 121, Issue , 2016, Pages 176-185

  Sommerhuber, Philipp F ^a   Wang, Tianyi ^b   Krause, Andreas ^b  

^a Institute for Wood Physics and Mechanical Technology of Wood   (Germany)

^b UNIVERSITY OF HAMBURG   (Germany)

Author keywords

Circular economy; Mechanical properties; Resource efficiency; Waste to resource; WEEE; Wood plastic composites

Indexed keywords

CONSUMER ELECTRONICS; COUPLING AGENTS; EFFICIENCY; ELASTIC MODULI; ELASTOMERS; INJECTION MOLDING; MECHANICAL PROPERTIES; PARTICLE BOARD; PLANTS (BOTANY); PLASTICS APPLICATIONS; PRODUCT DESIGN; RECYCLING; REINFORCEMENT; STIFFNESS; STYRENE; WOOD; WOOD PRODUCTS;

ACRYLONITRILE BUTADIENE STYRENE; CIRCULAR ECONOMY; PARTICLEBOARD PRODUCTION; RESOURCE EFFICIENCIES; STRENGTH AND STIFFNESS; STYRENE-MALEIC ANHYDRIDE; WEEE; WOOD PLASTIC COMPOSITE;

ABS RESINS;

EID: 84960099531     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2016.02.036     Document Type: Article

References (46)

1. K.B. Adhikary, S. Pang, and M.P. Staiger Dimensional stability and mechanical behaviour of wood-plastic composites based on recycled and virgin high-density polyethylene (HDPE) Compos. B. Eng. 39 5 2008 807 815
2. M. Borrega, and P.P. Kärenlampi Effect of relative humidity on thermal degradation of Norway spruce (Picea abies) wood J. Wood Sci. 54 4 2008 323 328
3. M. Carus, A. Eder, L. Dammer, H. Korte, L. Scholz, R. Essel, E. Breitmayer, and M. Barth WPC/NFC Market Study 2014-10 (Update 2015-06) - Wood-Plastic Composites (WPC) and Natural Fibre Composites (NFC): European and Global Markets 2012 and Future Trends in Automotive and Construction 2015 Short version http://bio-based.eu/?did=18787&vp-edd-act=show-download (accessed 17.07.15.)
4. M. Chaharmahali, M. Tajvidi, and S. Kazemi-Najafi Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard Polym. Compos. 29 6 2008 606 610
5. M. Chanda, and S.K. Roy Plastics Technology Handbook 2007 CRC Press Boca Raton
6. L. Chotirat, K. Chaochanchaikul, and N. Sombatsompop On adhesion mechanisms and interfacial strength in acrylonitrile-butadiene-styrene/wood sawdust composites Int. J. Adhes. Adhes. 27 8 2007 669 678
7. F. Cucchiella, I. D'Adamo, S.C. Lenny Koh, and P. Rosa Recycling of WEEEs: An economic assessment of present and future e-waste streams Renew. Sustain. Energy Rev. 51 2015 263 272
8. S.K. Diederichs 2010 Status quo for life cycle inventory and environmental impact assessment of wood-based panel production in Germany Wood Fiber Sci. 46 3 2014 1 16
9. E. Dimitrakakis, A. Janz, B. Bilitewski, and E. Gidarakos Determination of heavy metals and halogens in plastics from electric and electronic waste Waste Manag. 29 2009 2700 2706
10. DIN EN Composites Made from Cellulose-based Materials and Thermoplastics (Usually Called Wood-Polymer Composites (WPC) or Natural Fibre Composites (NFC)) - Part 1: Test Methods for Characterisation of Compounds and Products DIN EN 15534 2014 Beuth Verlag GmbH Berlin
11. DIN EN Safety of Toys - Part 3: Migration of Certain Elements DIN EN 71 2002 Beuth Verlag GmbH Berlin
12. DIN EN ISO Plastics - Determination of Tensile Properties - Part 3 DIN EN ISO 527 1996 Beuth Verlag GmbH Berlin
13. DIN EN ISO Plastics - Determination of Flexural Properties DIN EN ISO 178 2003 Beuth Verlag GmbH Berlin
14. European Commission Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on Waste and Repealing Certain Directives 2008 Waste Framework Directive
15. European Commission Directive 2011/65/EU of the European Parliament and of the Council of June 2011 on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2011 RoHS
16. European Commission Roadmap to a Resource Efficient Europe COM(2011) 571 Final 2011 Brussels
17. European Commission Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment 2012 WEEE
18. European Commission Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 Concerning the Making Available on the Market and Use of Biocidal Products 2012
19. H. Fink, U. Panne, M. Theisen, R. Niessner, T. Probst, and X. Lin Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis Fresenius' J. Anal. Chem. 368 2-3 2000 235 239
20. German Government Verordnung über Anforderungen an die Verwertung und Beseititung von Altholz: Altholzverordnung (German Waste Wood Directive) 2003 AltholzV
21. German Government Gesetz zur Förderung der Kreislaufwirtschaft und Sicherung der umweltverträglichen Bewirtschaftung von Abfällen (German Waste Management and Product Recycling Act) 2012 KrWG
22. C. Gozdecki, A. Wilczyński, M. Kociszewski, and S. Zajchowski Properties of wood-plastic composites made of milled particleboard and polypropylene Holz Roh Werkst. 73 1 2015 87 95
23. W. Haas, F. Krausmann, D. Wiedenhofer, and M. Heinz How circular is the global economy? An assessment of material flows, waste production, and recycling in the European Union and the world in 2005 J. Ind. Ecol. 19 5 2015 765 777
24. J. Huisman, I. Botezatu, L. Herreras, M. Liddane, M. Hintsa, V. Luda di Cortemiglia, P. Leroy, E. Vermeersch, S. Mohanty, S. van den Brink, B. Ghenciu, D. Dimitrova, E. Nash, T. Shryane, M. Wieting, M. Kehoe, C.P. Baldé, F. Magalini, A. Zanasi, F. Ruini, and A. Bonzio Countering WEEE Illegal Trade (CWIT) Summary Report, Market Assessment, Legal Analysis, Crime Analysis and Recommendations Roadmap 2015 Lyon, France
25. S. Kazemi-Najafi Use of recycled plastics in wood plastic composites - A review Waste Manag. 33 9 2013 1898 1905
26. S. Kazemi-Najafi, M. Mostafazadeh-Marznaki, M. Chaharmahali, and M. Tajvidi Effect of thermomechanical degradation of polypropylene on mechanical properties of wood-polypropylene composites J. Compos. Mater. 43 22 2009 2543 2554
27. H. Khanjanzadeh, T. Tabarsa, and A. Shakeri Morphology, dimensional stability and mechanical properties of polypropylene-wood flour composites with and without nanoclay J. Reinf. Plast. Compos. 31 5 2012 341 350
28. P. Kiddee, R. Naidu, and M.H. Wong Electronic waste management approaches: An overview Waste Manag. 33 5 2013 1237 1250
29. R. Köhnlechner Erzeugung sauberer PS- und ABS-Fraktionen aus gemischtem Elektronikschrott K.J. Thomé-Kozmiensky, D. Goldmann, Recycling und Rohstoffe vol. 7 2014 TK Verlag Karl Thomé-Kozmienksy Neuruppin 379 399
30. P.-Y. Kuo, S.-Y. Wang, J.-H. Chen, H.-C. Hsueh, and M.-J. Tsai Effects of material compositions on the mechanical properties of wood-plastic composites manufactured by injection molding Mater. Des. 30 9 2009 3489 3496
31. J. Lisperguer, C. Droguett, B. Ruf, and M. Nuñez The effect of wood acetylation on thermal behavior of wood-polystyrene composites J. Chil. Chem. Soc. 52 1 2007
32. J. Lisperguer, X. Bustos, and Y. Saravia Thermal and Mechanical Properties of Wood Flour-Polystyrene Blends from Postconsumer Plastic Waste 2010
33. U. Mantau, U. Saal, K. Prins, F. Steierer, M. Lindner, H. Verkerk, J. Eggers, N. Leek, J. Oldenburger, and A. Asikainen Real Potential for Changes in Growth and Use of EU Forests 2010 Final Report, Hamburg, Germany
34. S. Migneault, A. Koubaa, and P. Perré Effect of fiber origin, proportion, and chemical composition on the mechanical and physical properties of wood-plastic composites J. Wood Chem. Technol. 34 4 2014 241 261
35. M. Oguchi, H. Sakanakura, and A. Terazono Toxic metals in WEEE: Characterization and substance flow analysis in waste treatment processes Sci. Total Environ. 463-464 2013 1124 1132
36. M. Pracella, M.M.-U. Haque, and V. Alvarez Functionalization, compatibilization and properties of polyolefin composites with natural fibers Polymers 2 4 2010 554 574
37. M. Premalatha, T. Abbasi, and S.A. Abbasi The generation, impact, and management of e-waste: State of the art Crit. Rev. Environ. Sci. Technol. 44 14 2014 1577 1678
38. H. Riedel, G. Schmoeckel, and C. Marb Schwermetall- und Chlorgehalte in Altholzsortimenten Holztechnologie 55 5 2014 31 38
39. S. Salhofer, B. Steuer, R. Ramusch, and P. Beigl WEEE management in Europe and China - A comparison Waste Manag. 2015 1 9 (in press)
40. M. Schlummer, L. Gruber, A. Mäurer, G. Wolz, and R. van Eldik Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management Chemosphere 67 2007 1866 1876
41. P.F. Sommerhuber, J. Welling, and A. Krause Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites Waste Manag. 46 2015 76 85
42. L. Teuber, V.-S. Osburg, W. Toporowski, H. Militz, and A. Krause Wood polymer composites and their contribution to cascading utilisation J. Clean. Prod. 110 2016 9 15
43. Z. Wang, X.-z. Zhao, and W.-j. Guo Process factors and performances of recycled plastic-wood fiber composites J. F. Univ. Beijing 27 1 2005 1 5
44. K.L. Yam, B.K. Gogoi, C.C. Lai, and S.E. Selke Composites from compounding wood fibers with recycled high density polyethylene Polym. Eng. Sci. 30 11 1990 693 699
45. S.-K. Yeh, S. Agarwal, and R.K. Gupta Wood-plastic composites formulated with virgin and recycled ABS Compos. Sci. Technol. 69 13 2009 2225 2230
46. B.C.J. Zoeteman, H.R. Krikke, and J. Venselaar Handling WEEE waste flows. On the effectiveness of producer responsibility in a globalizing world Int. J. Adv. Manuf. Technol. 47 5-8 2010 415 436