Investigation of convective heat transfer in 9-layer film blowing process by using variational principles

International Journal of Heat and Mass Transfer

Volumn 86, Issue , 2015, Pages 258-267

  Zatloukal, Martin ^a   Kolarik, Roman ^a  

^a TOMAS BATA UNIVERSITY IN ZLIN   (Czech Republic)

Author keywords

Coextrusion; Convective heat transfer; Heat transfer coefficient; Multi layer film blowing

Indexed keywords

COEXTRUSION; ELASTIC MODULI; HEAT TRANSFER; HEAT TRANSFER COEFFICIENTS; MECHANICAL PROPERTIES; MULTILAYER FILMS; MULTILAYERS; VARIATIONAL TECHNIQUES;

BRAMPTON ENGINEERINGS; CONVECTIVE HEAT TRANSFER; CONVECTIVE HEAT TRANSFER MODEL; MULTILAYER STRUCTURES; PARAMETRIC -ANALYSIS; PROCESSING CONDITION; TEMPERATURE PROFILES; VARIATIONAL PRINCIPLES;

HEAT CONVECTION;

EID: 84959851999     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2015.02.071     Document Type: Article

References (54)

1. T.I. Butler Film Extrusion Manual: Process, Materials, Properties 2005 Tappi Press Atlanta 1-59510-075-X
2. M. Zatloukal, and J. Vlcek Application of variational principles in modeling of the film blowing process for high stalk bubbles J. Non-Newtonian Fluid Mech. 133 2006 63 72
3. D.G. Baird, and D.I. Collias Polymer Processing: Principles and Design 1998 John Wiley & Sons Inc. New York 0-471-25453-3
4. M. Beaulne, and E. Mitsoulis Effect of viscoelasticity in the film-blowing process J. Appl. Polym. Sci. 105 2007 2098 2112
5. C.J.S. Petrie A comparison of theoretical predictions with published experimental measurements on the blown film process AICHE J. 21 1975 275 282
6. G. Menges, and W.O. Predöhl Certain aspects of film blowing of low-density polyethylene Polym. Eng. Sci. 15 1975 394 399
7. T. Kanai, and J.L. White Kinematics, dynamics and stability of the tubular film extrusion of various polyethylenes Polym. Eng. Sci. 24 1984 1185 1201
8. G. Nagarajan, G.A. Campbell, Experimental determination of heat transfer coefficient in blown film process, in: Annual Technical Conference - ANTEC, Conference Proceedings, 1995, pp. 162-166.
9. J. Hauck, and W.J. Michaeli Investigation into the cooling characteristics of blown film extrusion lines Reinf. Plast. Compos. 18 1999 895 905
10. V. Sidiropoulos, and J. Vlachopoulos The effects of dual-orifice air-ring design on blown film cooling Polym. Eng. Sci. 40 2000 1611 1618
11. V. Sidiropoulos, and J. Vlachopoulos Numerical simulation of blown film cooling Reinf. Plast. Compos. 21 2002 629 637
12. G.A. Campbell, N. Ganesh, S.W. Campbell, L. Burl, Annual Technical Conference - ANTEC, Conference Proceedings, 2003, pp. 49-53.
13. Z. Zhang, and P.G. Lafleur A study of heat transfer in the blown film process J. Plast. Film Sheet. 23 2007 297 317
14. L.K. Henrichsen, and A.J. McHugh Analysis of film blowing with flow-enhanced crystallization Int. Polym. Proc. 22 2007 179 189
15. J.C. Pirkle, and R.D. Braatz A thin-shell two-phase microstructural model for blown film extrusion J. Rheol. 54 2010 471 505
16. A.K. Doufas A microstructural flow-induced crystallization model for film blowing: validation with experimental data Rheol. Acta 53 2014 269 293
17. G.A. Campbell Kinematics, dynamics, crystallization, and thermal characteristics and their relationship to physical properties of blown film T. Kanai, G.A. Campbell, Film Processing Advances 2014 Hanser 978-1-56990-529-6 28 66
18. J.R.A. Pearson, and C.J.S. Petrie The flow of a tubular film. Part 1. Formal mathematical representation J. Fluid. Mech. 40 1970 1 19
19. J.R.A. Pearson, and C.J.S. Petrie The flow of a tubular film. Part 2. Interpretation of the model and discussion of solutions J. Fluid Mech. 42 1970 609 625
20. J.R.A. Pearson, and C.J.S. Petrie A fluid-mechanical analysis of the film-blowing process Plast. Polym. 38 1970 85 94
21. X.L. Luo, and R.I. Tanner A computer study of film blowing Polym. Eng. Sci. 25 1985 620 629
22. J.M. Andre, J.F. Agassant, Y. Demay, J.M. Haudin, and B. Monasse Numerical modeling of the polymer film blowing process Int. J. Form. Proc. 1 1998 197 210
23. C.C. Liu, D.C. Bogue, and J.E. Spruiell Tubular film blowing. Part 1. On-line experimental studies Int. Polym. Process. 10 1995 226 229
24. C.C. Liu, D.C. Bogue, and J.E. Spruiell Tubular film blowing. Part 2. Theoretical modelling Int. Polym. Process. 10 1995 230 236
25. C.J.S. Petrie, Tubular film blowing-myths and science, in: Proceedings of the Sixth European Conference on Rheology, Institute of Polymeric Materials, University of Erlangen-Nurnberg, Germany, 2002.
26. J.C. Pirkle, and R.D. Braatz Dynamic modeling of blown film extrusion Polym. Eng. Sci. 43 2003 398 418
27. C.D. Han, and R. Shetty Studies on multilayer film coextrusion III. The rheology of blown film coextrusion Polym. Eng. Sci. 18 1978 187 199
28. K.-S. Yoon, and C.-W. Park Analysis of isothermal two-layer blown film coextrusion Polym. Eng. Sci. 32 1992 1771 1777
29. K.-S. Yoon, and C.-W. Park Stability of a two-layer blown film coextrusion J. Non-Newtonian Fluid Mech. 89 2000 97 116
30. J. Stasiek Review of a mathematical treatment of the heat transfer in multi-layer film blowing Prog. Rubber Plast. Recycl. Technol. 16 2000 183 192
31. S. Elkoun, M.A. Huneault, K. McCormick, F. Puterbaugh, and F. Kale LLDPE-based mono- and multilayer blown films: property enhancement through coextrusion Polym. Eng. Sci. 45 2005 1222 1230
32. E. Gamache, J.-F. Agassant, Y. Demay, and P.G. Lafleur Evaluation of stresses in a two-layer co-extruded LDPE melt blown film J. Plast. Film Sheet. 21 2005 127 144
33. G. Gururajan, and A.A. Ogale Effect of coextrusion on PP/LDPE bicomponent blown films: Raman spectroscopy for real-time microstructural measurements J. Plast. Film Sheet. 23 2007 37 49
34. F. Xu, and A.J. McHugh A model for the two-layer blown film process with flow-enhanced crystallization Chem. Eng. Sci. 64 2009 4787 4795
35. T. Kanai, and J.L. White Dynamics, heat transfer and structure development in tubular film extrusion of polymer melts: a mathematical model and predictions J. Polym. Eng. 5 1985 135 157
36. C.D. Han, and J.Y. Park Studies on blown film extrusion. II. Analysis of the deformation and heat transfer processes J. Appl. Polym. Sci. 19 1975 3277 3290
37. H.A. Khonakdar, J. Morshedian, and A.O. Nodehi Mathematical and computational modeling of heat transfer and deformation in film blowing process J. Appl. Polym. Sci. 86 2002 2115 2123
38. C.C. Liu, D.C. Bogue, and J.E. Spruiell Tubular film blowing. Part 2: Theoretical modelling Int. Polym. Proc. 10 1995 230 236
39. A.K. Doufas, and A.J. McHugh Simulation of film blowing including flow-induced crystallization J. Rheol. 45 2001 1085 1104
40. B. Cao, and G. Campbell Viscoplastic-elastic modeling of tubular blown film processing AIChE J. 36 1990 420 430
41. S. Sarafrazi, and F. Sharif Non-isothermal simulation of the film blowing process using multi-mode extended pom-pom model Int. Polym. Proc. 23 2008 30 37
42. I.A. Muslet, and M.R. Kamal Computer simulation of the film blowing process incorporating crystallization and viscoelasticity J. Rheol. 48 2004 525 550
43. M. Zatloukal, and J. Vlcek Modeling of the film blowing process by using variational principles J. Non-Newtonian Fluid Mech. 123 2004 201 213
44. R. Kolarik, and M. Zatloukal Modeling of non-isothermal film blowing process for non-newtonian fluids by using variational principles J. Appl. Polym. Sci. 122 2011 2807 2820
45. R. Kolarik, M. Zatloukal, and C. Tzoganakis Stability analysis of non-isothermal film blowing process for non-Newtonian fluids using variational principles Chem. Eng. Sci. 73 2012 439 453
46. R. Kolarik, M. Zatloukal, and M. Martyn The effect of polyolefin extensional rheology on non-isothermal film blowing process stability Int. J. Heat Mass Transfer 56 2013 694 708
47. M. Janas, J. Wortberg, T. Uniewski, S. Blume, A prediction model for the numerical optimization of a novel blown film cooling system, in: Annual Technical Conference - ANTEC, Conference Proceedings, vol. 2, 2014, pp. 1194-1199. < http://legacy.4spe.org/conferences/antec2014/papers/1870511.pdf >.
48. C.S. Yih Advances in Applied Mechanics vol. 14 1974 Academic Press
49. S. Govindjee Engineering Mechanics of Deformable Solids: A Presentation with Exercises 2012 Oxford University Press
50. V. Sidiropoulos, The effects of air cooling on the film blowing process (Ph.D. thesis), McMaster University, 2000.
51. B.A. Morris The effect of coextrusion on bubble kinematics temperature distribution and property development in the blown film process J. Plast. Film Sheet. 15 1999 25 36
52. G. Giriprasath, A.A. Ogale, Processing - structure relationship in bilayer polyolefin blown films, in: Annual Technical Conference - ANTEC, Conference Proceedings, vol. 2, 2006, pp. 830-834.
53. Y.A. Cengel Heat and Mass Transfer: A Practical Approach third ed. 2007 McGraw-Hill New York 978-0073250359
54. Z. Zhang, P.G. Lafleur, and F. Bertrand Effect of aerodynamics on film blowing process Int. Polym. Proc. 21 2006 527 535