Fault strength in thin-skinned tectonic wedges across the smectiteillite transition: Constraints from friction experiments and critical tapers

Geology

Volumn 43, Issue 10, 2015, Pages 923-926

  Tesei, Telemaco ^a   Lacroix, Brice ^b   Collettini, Cristiano ^a,c  

^a ISTITUTO NAZIONALE DI GEOFISICA E VULCANOLOGIA   (Italy)

^b UNIVERSITY OF MICHIGAN   (United States)

^c SAPIENZA UNIVERSITY OF ROME   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CLAY MINERALS; FRICTION; TECTONICS; TRIBOLOGY;

ACCRETIONARY WEDGE; FLUID DISTRIBUTION; FOLD-AND-THRUST BELTS; FRICTION EXPERIMENTS; FRICTIONAL PROPERTIES; SEDIMENTARY HORIZONS; SEISMIC BEHAVIOR; THIN-SKINNED TECTONICS;

FAULTING;

ACCRETIONARY PRISM; FAULT ZONE; FOLD AND THRUST BELT; ILLITE; OVERPRESSURE; SMECTITE; TECTONIC EVOLUTION; TECTONIC SETTING;

EID: 84959370938     PISSN: 00917613     EISSN: 19432682     Source Type: Journal    
DOI: 10.1130/G36978.1     Document Type: Article

References (35)

1. Bally, A.W., Gordy, P.L., and Stewart, G.A., 1966, Structure, seismic data and orogenic evolution of southern Canadian Rocky Mountains: Bulletin of Canadian Petroleum Geology, v. 14, p. 337-381.
2. Blanpied, M.L., Marone, C., Lockner, D.A., Byerlee, J.D., and King, D.P., 1998, Quantitative measure of variation in fault rheology due to fluid-rock interactions: Journal of Geophysical Research, v. 103, no. B5, p. 9691-9712, doi: 10.1029/98JB00162.
3. Byerlee, J., 1978, Friction of rocks: Pure and Applied Geophysics, v. 116, p. 615-626, doi:10.1007/BF00876528.
4. Byrne, D.E., Davis, D.M., and Sykes, L.R., 1988, Loci and maximum size of thrust earthquakes and mechanics of the shallow region of subduction zones: Tectonics, v. 7, p. 833-857, doi: 10.1029/TC007i004p00833.
5. Collettini, C., Niemeijer, A., Viti, C., and Marone, C., 2009, Fault zone fabric and fault weakness: Nature, v. 462, p. 907-910, doi:10.1038/nature08585.
6. Collettini, C., Di Stefano, G., Carpenter, B., Scarlato, P., Tesei, T., Mollo, S., Trippetta, F., Marone, C., Romeo, G., and Chiaraluce, L., 2014, A novel and versatile apparatus for brittle rock deformation: International Journal of Rock Mechanics and Mining Sciences, v. 66, p. 114-123, doi: 10.1016/j.ijrmms.2013.12.005.
7. Dahlen, F.A., 1990, Critical taper model of fold-andthrust belts and accretionary wedges: Annual Review of Earth and Planetary Sciences, v. 18, p. 55-99, doi:10.1146/annurev.ea.18.050190.000415.
8. Davis, D., Suppe, J., and Dahlen, F.A., 1983, Mechanics of fold-and-thrust belts and accretionary wedges: Journal of Geophysical Research, v. 88, no. B2, p. 1153-1172, doi:10.1029/JB088iB02p01153.
9. Fagereng, A., 2011, Wedge geometry, mechanical strength, and interseismic coupling of the Hikurangi subduction thrust, New Zealand: Tectonophysics, v. 507, p. 26-30, doi:10.1016/j.tecto.2011.05.004.
10. Fagereng, A., and Sibson, R.H., 2010, Mélange rheology and seismic style: Geology, v. 38, p. 751-754, doi:10.1130/G30868.1.
11. Festa, A., Pini, G.A., Dilek, Y., and Codegone, G., 2010, Mélanges and mélange-forming processes: A historical overview and new concepts: International Geology Review, v. 52, p. 1040-1105, doi:10.1080/00206810903557704.
12. Gao, X., and Wang, K., 2014, Strength of stick-slip and creeping subduction megathrusts from heat flow observations: Science, v. 345, p. 1038-1041, doi: 10.1126/science.1255487.
13. Holdsworth, R.E., 2004, Weak faults-Rotten cores: Science, v. 303, p. 181-182, doi:10.1126/science.1092491.
14. Ikari, M.J., Saffer, D.M., 2011, Comparison of frictional strength and velocity dependence between fault zones in the Nankai accretionary complex: Geochemistry, Geophysics, Geosystems, v. 12, Q0AD11, doi:10.1029/2010GC003442.
15. Kimura, G., Yamaguchi, A., Hojo, M., Kitamura, Y., Kameda, J., Ujiie, K., Hamada, Y., Hamahashi, M., and Hina, H., 2012, Tectonic mélange as fault rock of subduction plate boundary: Tectonophysics, v. 568-569, p. 25-38, doi:10.1016/j.tecto.2011.08.025.
16. Lacroix, B., Buatier, M., Labaume, P., Travé, A., Dubois, M., Charpentier, D., Ventalon, S., and Convert-Gaubier, D., 2011, Microtectonic and geochemical characterization of thrusting in a foreland basin: Example of the South Pyrenean orogenic wedge (Spain): Journal of Structural Geology, v. 33, p. 1359-1377, doi:10.1016/j.jsg.2011.06.006.
17. Lamb, S., 2006, Shear stresses on megathrusts: Implications for mountain building behind subduction zones: Journal of Geophysical Research, v. 111, B07401, doi:10.1029/2005JB003916.
18. Marone, C., 1998, Laboratory-derived friction laws and their application to seismic faulting: Annual Review of Earth and Planetary Sciences, v. 26, p. 643-696, doi:10.1146/annurev.earth.26.1.643.
19. Moore, J.C., and Saffer, D.M., 2001, Updip limit of the seismogenic zone beneath the accretionary prism of southwest Japan: An effect of diagenetic to low-grade metamorphic processes and increasing effective stress: Geology, v. 29, p. 183-186, doi:10.1130/0091-7613 (2001) 029 < 0183:ULOTSZ >2.0.CO;2.
20. Moore, J.C., Roeske, S., Cowan, D.S., Lundberg, N., Gonzales, E., Schoonmaker, J., and Lucas, S.E., 1986, Scaly fabrics from Deep Sea Drilling Project cores from forearcs, in Moore, J.C., ed., Structural fabrics in Deep Sea Drilling Project cores from forearcs: Geological Society of America Memoir 166, p. 55-74, doi:10.1130/MEM166-p55.
21. Morley, C.K., and Guerin, G., 1996, Comparison of gravity-driven deformation styles and behavior associated with mobile shales and salt: Tectonics, v. 15, p. 1154-1170, doi:10.1029/96TC01416.
22. Morrow, C., Radney, B., and Byerlee, J., 1992, Frictional strength and the effective pressure law of montmorillonite and illite clays, in Evans, B., and Wong, T.-F., eds., Fault mechanics and transport properties of rocks: International Geophysics, v. 51, p. 69-88, doi:10.1016/S0074-6142 (08) 62815-6.
23. Mount, V.S., and Suppe, J., 1987, State of stress near the San Andreas fault: Implications for wrench tectonics: Geology, v. 15, p. 1143-1146, doi: 10.1130/0091-7613 (1987) 15 < 1143:SOSNTS > 2.0.CO;2.
24. Remitti, F., Smith, S.A.F., Mittempergher, S., Gualtieri, A.F., and Di Toro, G., 2015, Frictional properties of fault zone gouges from the J-FAST drilling project (Mw 9.0 2011 Tohoku-Oki earthquake): Geophysical Research Letters, v. 42, p. 2691-2699, doi:10.1002/2015GL063507.
25. Rice, J.R., 2006, Heating and weakening of faults during earthquake slip: Journal of Geophysical Research, v. 111, B05311, doi: 10.1029/2005JB004006.
26. Saffer, D.M., and Marone, C., 2003, Comparison of smectite-and illite-rick gouge frictional properties: Application to the updip limit of the seismogenic zone along subduction megathrusts: Earth and Planetary Science Letters, v. 215, p. 219-235, doi:10.1016/S0012-821X(03)00424-2.
27. Saffer, D.M., Lockner, D.A., and McKiernan, A., 2012, Effects of smectite to illite transformation on the frictional strength and sliding stability of intact marine mudstones: Geophysical Research Letters, v. 39, L11304, doi: 10.1029/2012GL051761.
28. Suppe, J., 2007, Absolute fault and crustal strength from wedge tapers: Geology, v. 35, p. 1127-1130, doi:10.1130/G24053A.1.
29. Tesei, T., Collettini, C., Barchi, M.R., Carpenter, B.M., and Di Stefano, G., 2014, Heterogeneous strength and fault zone complexity of carbonate-bearing thrusts with possible implications for seismicity: Earth and Planetary Science Letters, v. 408, p. 307-318, doi:10.1016/j.epsl.2014.10.021.
30. Tobin, H.J., and Saffer, D.M., 2009, Elevated fluid pressure and extreme mechanical weakness of a plate boundary thrust, Nankai Trough subduction zone: Geology, v. 37, p. 679-682, doi: 10.1130/G25752A.1.
31. Townend, J., and Zoback, M.D., 2000, How faulting keeps the crust strong: Geology, v. 28, p. 399-402, doi:10.1130/0091-7613(2000)28<399:HFKTCS>2.0.CO;2.
32. Vroljic, P., 1990, On the mechanical role of smectite in subduction zones: Geology, v. 18, p. 703-707, doi: 10.1130/0091-7613(1990)018<0703:OTMROS >2.3.CO;2.
33. Wang, K., and He, J., 1999, Mechanics of low-stress forearcs: Nankai and Cascadia: Journal of Geophysical Research, v. 104, no. B7, p. 15, 191-15, 205, doi:10.1029/1999JB900103.
34. Wang, K., and Hu, Y., 2006, Accretionary prisms in subduction earthquake cycles: The theory of dynamic Coulomb wedge: Journal of Geophysical Research, v. 111, B06410, doi: 10.1029/2005JB004094.
35. Yue, L.-F., and Suppe, J., 2014, Regional pore-fluid pressure in the active western Taiwan thrust belt: A test of the classic Hubbert-Rubey fault-weakening hypothesis: Journal of Structural Geology, v. 69, p. 493-518, doi:10.1016/j.jsg.2014.08.002.