Research Progress in Improving the Rate Performance of LiFePO4 Cathode Materials

Nano-Micro Letters

Volumn 6, Issue 3, 2014, Pages 209-226

  Deng, Sixu ^a   Wang, Hao ^a   Liu, Hao ^b   Liu, Jingbing ^a   Yan, Hui ^a  

^a BEIJING UNIVERSITY OF TECHNOLOGY   (China)

^b Chengdu Green Energy and Green Manufacturing Technology Research and Development Center   (China)

Author keywords

LiFePO4; Lithium ion battery; Rate performance

Indexed keywords

CATHODE MATERIALS; CATHODES; IONS; IRON COMPOUNDS; LITHIUM COMPOUNDS; LITHIUM-ION BATTERIES; OLIVINE; POROUS MATERIALS;

ELECTRONIC CONDUCTIVITY; ENVIRONMENTAL-FRIENDLY; LIFEPO4; LITHIUM ION DIFFUSION; LITHIUM IRON PHOSPHATES; RATE PERFORMANCE; SAFETY CONSIDERATIONS; THEORETICAL CAPACITY;

PHOSPHORUS COMPOUNDS;

EID: 84958753112     PISSN: 23116706     EISSN: 21505551     Source Type: Journal    
DOI: 10.1007/BF03353785     Document Type: Review

References (118)

1. Y. Wang and G. Cao, “Developments in nanostructured cathode materials for high-performance lithium-ion batteries”, Adv. Mater. 20(12), 2251–2269 (2008). http://dx.doi.org/10.1002/adma.200702242
2. G. Jeong, Y.-U. Kim, H. Kim, Y.-J. Kim and H.-J. Sohn, “Prospective materials and applications for Li secondary batteries”, Energ. Environ. Sci. 4(6), 1986–2002 (2011). http://dx.doi.org/10.1039/C0EE00831A
3. 4 cathode materials for lithium-ion batteries”, Energ. Environ. Sci. 5(1), 5163–5185 (2012). http://dx.doi.org/10.1039/c1ee01263k
4. A. K. Padhi, K. S. Nanjundaswamy and J. B. Goodenough, “Phospho-olivines as positive-electrode materials for rechargeable lithium batteries”, J. Electrochem. Soc. 144(4), 1188–1194 (1997). http://dx.doi.org/10.1149/1.1837571
5. A. Ritchie and W. Howard, “Recent developments and likely advances in lithium-ion batteries”, J. Power Sources 162(2), 809–812 (2006). http://dx.doi.org/10.1016/j.jpowsour.2005.07.014
6. T. Ohzuku and R. J. Brodd, “An overview of positive-electrode materials for advanced lithium-ion batteries”, J. Power Sources 174(2), 449–456 (2007). http://dx.doi.org/10.1016/j.jpowsour.2007.06.154
7. D. Jugović and D. Uskoković, “A review of recent developments in the synthesis procedures of lithium iron phosphate powders”, J. Power Sources 190(2), 538–544 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.01.074
8. 4 thin films with different morphology and crystallinity”, Electrochim. Acta. 54(26), 6565–6569 (2009). http://dx.doi.org/10.1016/j.electacta.2009.06.030
9. 4 for lithium-ion batteries”, Synthetic Met. 162(13–14), 1315–1326 (2012). http://dx.doi.org/10.1016/j.synthmet.2012.04.025
10. S. Y. Chung, J. T. Bloking and Y. M. Chiang, “Electronically conductive phospho-olivines as lithium storage electrodes”, Nat. Mater. 1(2), 123–8 (2002). http://dx.doi.org/10.1038/nmat732
11. 2 and the resulting electrochemical properties”, Solid State Ionics 36(1–2), 53–58 (1989). http://dx.doi.org/10.1016/0167-2738(89)90058-1
12. 4 spinels”, J. Solid State Chem. 131(1), 138–143 (1997). http://dx.doi.org/10.1006/jssc.1997.7366
13. 4 nanocrystalline cathodes with controlled morphology”, Electroanal. 23(9), 2079–2086 (2011). http://dx.doi.org/10.1002/elan.201100222
14. 4 and its effect on the electrochemical activity”, Electrochem. Commun. 10(7), 1071–1073 (2008). http://dx.doi.org/10.1016/j.elecom.2008.05.010
15. 4 cathode material for lithium-ion batteries”, Energ. Environ. Sci. 4(2), 269 (2011). http://dx.doi.org/10.1039/c0ee00029a
16. 4 olivine-type battery material”, Chem. Mater. 17(20), 5085–5092 (2005). http://dx.doi.org/10.1021/cm050999v
17. J. M. Tarascon and M. Armand, “Issues and challenges facing rechargeable lithium batteries”, Nature 414(6861), 359–367 (2001). http://dx.doi.org/10.1038/35104644
18. 2O”, Adv. Funct. Mater. 16(16), 2135–2140 (2006). http://dx.doi.org/10.1002/adfm.200600442
19. 4/carbon composite cathode”, J. Power Sources 178(2), 789–794 (2008). http://dx.doi.org/10.1016/j.jpowsour.2007.10.004
20. 4”, J. Power Sources 163(1), 180–184 (2006). http://dx.doi.org/10.1016/j.jpowsour.2005.11.075
21. 4/C prepared by an aqueous solution method using sucrose”, Electrochim. Acta 55(3), 1034–1041 (2010). http://dx.doi.org/10.1016/j.electacta.2009.09.029
22. 4/C composite and its electrochemical properties as lithium intercalation material”, Electrochim. Acta 49(24), 4213–4222 (2004). http://dx.doi.org/10.1016/j.electacta.2004.04.016
23. 4/carbon cathode materials prepared by ultrasonic spray pyrolysis”, J. Power Sources 159(1), 307–311 (2006). http://dx.doi.org/10.1016/j.jpowsour.2006.04.113
24. 4 prepared by sol—gel technique”, Solid State Ionics 177(5–6), 497–500 (2006). http://dx.doi.org/10.1016/j.ssi.2005.11.018
25. 4/C”, J. Power Sources 184(2), 444–448 (2008). http://dx.doi.org/10.1016/j.jpowsour.2008.03.026
26. 4/C composite from mechanical activation using sucrose as carbon source”, Electrochim. Acta 54(10), 2861–2868 (2009). http://dx.doi.org/10.1016/j.electacta.2008.11.012
27. S. A. Needham, A. Calka, G. X. Wang, A. Mosbah and H. K. Liu, “A new rapid synthesis technique for electrochemically active materials used in energy storage applications”, Electrochem. Commun. 8(3), 434–438 (2006). http://dx.doi.org/10.1016/j.elecom.2005.12.011
28. 4/C composites prepared by carbothermal reduction”, J. Power Sources 189(1), 423–428 (2009). http://dx.doi.org/10.1016/j.jpowsour.2008.07.032
29. 4/C cathode powders prepared by spray pyrolysis from the colloidal spray solution containing nano-sized carbon black”, Mater. Chem. Phys. 107(2–3), 328–333 (2008). http://dx.doi.org/10.1016/j.matchemphys.2007.07.025
30. 4/C composite cathode prepared from various polymer-containing precursors”, J. Power Sources 193(2), 822–827 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.04.013
31. 4/C composite cathodes”, J. Power Sources 189(1), 256–262 (2009). http://dx.doi.org/10.1016/j.jpowsour.2008.09.053
32. 4/C composites”, J. Electrochem. Soc. 152(3), A607–A610 (2005). http://dx.doi.org/10.1149/1.1860492
33. 4 at room temperature at high rates”, Electrochem. Solid ST. 4(10), A170–A172 (2001). http://dx.doi.org/10.1149/1.1396695
34. 4 cathode materials”, J. Power Sources 189(1), 462–466 (2009). http://dx.doi.org/10.1016/j.jpowsour.2008.12.069
35. 4/carbon nanocomposite with a core-shell structure and its synthesis by an in situ polymerization restriction method”, Angew. Chem. Int. Ed. Engl. 47(39), 7461–5 (2008). http://dx.doi.org/10.1002/anie.200802539
36. 4/C composite electrodes to maximize specific energy, volumetric energy, and tap density”, J. Electrochem. Soc. 149(9), A1184–A1189 (2002). http://dx.doi.org/10.1149/1.1498255
37. 4/C for lithium-ion battery adopting citric acid as carbon precursor”, J. Electrochem. Soc. 156(10), A802–A808 (2009). http://dx.doi.org/10.1149/1.3183880
38. 4/C nanocomposite cathodes for lithium ion batteries”, J. Phys. Chem. C 112(37), 14665–14671 (2008). http://dx.doi.org/10.1021/jp8053058
39. 4 (M=Mn, Fe, and Co) cathodes”, J. Electrochem. Soc. 156(2), A79–A83 (2009). http://dx.doi.org/10.1149/1.3028304
40. 4/carbon cathode”, Electrochem. Solid ST. 8(9), A484 (2005). http://dx.doi.org/10.1149/1.1999916
41. 4 cathode material dispersed with nano-structured carbon”, Electrochim. Acta. 51(1), 166–171 (2005). http://dx.doi.org/10.1016/j.electacta.2005.04.013
42. 4/C composite cathodes”, Powder Technol. 184(3), 313–317 (2008). http://dx.doi.org/10.1016/j.powtec.2007.09.002
43. 4/C with high capacity synthesized by carbothermal reduction method”, Ionics 16(4), 311–316 (2009). http://dx.doi.org/10.1007/s11581-009-0405-6
44. H. Xie and Z. Zhou, “Physical and electrochemical properties of mix-doped lithium iron phosphate as cathode material for lithium ion battery”, Electrochim. Acta 51(10), 2063–2067 (2006). http://dx.doi.org/10.1016/j.electacta.2005.07.014
45. 4: A first-principles investigation”, Physica B: Condens. Matter 405(3), 803–807 (2010). http://dx.doi.org/10.1016/j.physb.2009.05.035
46. G. X. Wang, S. L. Bewlay, K. Konstantinov, H. K. Liu, S. X. Dou and J. H. Ahn, “Physical and electrochemical properties of doped lithium iron phosphate electrodes”, Electrochim. Acta. 50(2–3), 443–447 (2004). http://dx.doi.org/10.1016/j.electacta.2004.04.047
47. T. H. Teng, M. R. Yang, S. h. Wu and Y. P. Chiang, “Electrochemical properties of LiFe0.9Mg0.1PO4/carbon cathode materials prepared by ultrasonic spray pyrolysis”, Solid State Commun. 142(7), 389–392 (2007). http://dx.doi.org/10.1016/j.ssc.2007.03.010
48. 4/C cathode materials”, J. Power Sources 174(2), 720–725 (2007). http://dx.doi.org/10.1016/j.jpowsour.2007.06.146
49. P. S. Herle, B. Ellis, N. Coombs and L. F. Nazar, “Nano-network electronic conduction in iron and nickel olivine phosphates”, Nat. Mater. 3(3), 147–152 (2004). http://dx.doi.org/10.1038/nmat1063
50. 4 composites”, Solid State Ionics 177(3–4), 333–341 (2006). http://dx.doi.org/10.1016/j.ssi.2005.11.003
51. 4”, Phys. Rev. B 69(10), 104303 (2004).
52. 4”, Electrochem. Solid ST. 8(6), A288–A290 (2005). http://dx.doi.org/10.1149/1.1895286
53. 4-based composite cathode”, Electrochim. Acta. 46(23), 3517–3523 (2001). http://dx.doi.org/10.1016/S0013-4686(01)00631-4
54. 4 by Fe-site doping”, Electrochim. Acta. 50(14), 2955–2958 (2005). http://dx.doi.org/10.1016/j.electacta.2004.11.045
55. 4/C during cycling”, Electrochim. Acta. 53(27), 7946–7951 (2008). http://dx.doi.org/10.1016/j.electacta.2008.06.005
56. 4/C via V-doping”, J. Power Sources 193(2), 841–845 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.03.061
57. 4/C cathode materials by chlorine doping”, J. Solid State Electr. 13(10), 1541–1544 (2008). http://dx.doi.org/10.1007/s10008-008-0721-1
58. 4 nanoparticles prepared by hydrothermal route”, Electrochim. Acta 56(24), 8833–8838 (2011). http://dx.doi.org/10.1016/j.electacta.2011.07.079
59. 4/C”, J. Power Sources 195(11), 3680–3683 (2010). http://dx.doi.org/10.1016/j.jpowsour.2009.12.074
60. 4/C”, Electrochim. Acta 56(24), 8477–8483 (2011). http://dx.doi.org/10.1016/j.electacta.2011.07.018
61. 4/C composites and their electrochemical performance”, J. Power Sources 194(2), 786–793 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.05.041
62. 4/C for high power lithium-ion batteries for hybrid electric vehicle application”, J. Power Sources. 194(2), 1094–1098 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.06.035
63. 4 electrodes (M = Fe, Mn)”, J. Am. Chem. Soc. 131(17), 6044–6045 (2009). http://dx.doi.org/10.1021/ja8090559
64. 4 cathodes”, Electrochem. Commun. 9(12), 2778–2783 (2007). http://dx.doi.org/10.1016/j.elecom.2007.09.020
65. 4 powders”, Electrochem. Solid ST. 9(7), A352–A355 (2006). http://dx.doi.org/10.1149/1.2201987
66. P. Gibot, M. Casas-Cabanas, L. Laffont, S. Levasseur, P. Carlach, S. Hamelet, J. M. Tarascon and C. Masquelier, “Room-temperature single-phase Li insertion/extraction in nanoscale LixFePO4”, Nat. Mater. 7(9), 741–747 (2008). http://dx.doi.org/10.1038/nmat2245
67. 4 cathodes for high-performance lithium batteries”, Chem. Mater. 20(14), 4560–4564 (2008). http://dx.doi.org/10.1021/cm8006364
68. 4/multi-walled carbon nanotube cathode material with enhanced electrochemical performance for lithium-ion batteries”, J. Power Sources 248(15), 588–595 (2014). http://dx.doi.org/10.1016/j.jpowsour.2013.06.070
69. 4/C architectures for high performance lithium ion batteries”, Electrochim. Acta 78(1), 633–637 (2012). http://dx.doi.org/10.1016/j.electacta.2012.06.059
70. 4 with multiwalled-carbon nanotubes for Li-ion batteries”, CrystEngComm. 16(2), 260 (2014). http://dx.doi.org/10.1039/c3ce41967c
71. 4 nanoplates”, J. Mater. Chem. 19(5), 605–610 (2009). http://dx.doi.org/10.1039/b817242k
72. 4 nanoparticles”, Chem. Commun. (Camb). 46(36), 6795–6797 (2010). http://dx.doi.org/10.1039/c0cc02522d
73. 4 using RuO2 as an oxidic nanoscale interconnect”, Adv. Mater. 19(15), 1963–1966 (2007). http://dx.doi.org/10.1002/adma.200700697
74. R. Dominko, M. Bele, M. Gaberscek, M. Remskar, D. Hanzel, J. M. Goupil, S. Pejovnik and J. Jamnik, “Porous olivine composites synthesized by sol—gel technique”, J. Power Sources 153(2), 274–280 (2006). http://dx.doi.org/10.1016/j.jpowsour.2005.05.033
75. 4/C microsphere by spray drying assisted template method”, J. Power Sources 189(1), 794–797 (2009). http://dx.doi.org/10.1016/j.jpowsour.2008.07.074
76. 4/multiwalled carbon nanotubes cathode material for lithium ion batteries”, Electrochim. Acta 115(1), 407–415 (2014). http://dx.doi.org/10.1016/j.electacta.2013.10.177
77. 4”, Chem. Mater. 19(12), 2960–2969 (2007). http://dx.doi.org/10.1021/cm062843g
78. 4/C composites porosity on their electrochemical performance”, J. Electrochem. Soc. 152(5), A858–A863 (2005). http://dx.doi.org/10.1149/1.1872674
79. 4/carbon composite electrode materials for high power lithium ion batteries”, Chem. Mater. 21(21), 5300–5306 (2009). http://dx.doi.org/10.1021/cm9024167
80. 4 electrode materials for high power lithium ion batteries”, Chem. Mater. 21(13), 2895–2903 (2009). http://dx.doi.org/10.1021/cm900698p
81. 4/C composite”, ACS Appl. Mater. Inter. 2(7), 2031–2038 (2010). http://dx.doi.org/10.1021/am100309w
82. 4/C nanocomposites: A novel and simple template-free concept and synthesis via sol—gel-spray drying method”, J. Power Sources 195(19), 6873–6878 (2010). http://dx.doi.org/10.1016/j.jpowsour.2010.01.042
83. 4 microspheres for high-performance lithium-ion batteries”, J. Phys. Chem. C 114(8), 3477–3482 (2010). http://dx.doi.org/10.1021/jp912102k
84. 4 via supercritical carbon dioxide”, Cryst. Growth Des. 12(5), 2166–2168 (2012). http://dx.doi.org/10.1021/cg3003146
85. 4 cathode materials”, RSC Adv. 3(31), 12786–12793 (2013). http://dx.doi.org/10.1039/c3ra41133h
86. 4 via supercritical carbon dioxide”, Electrochim. Acta 94(1), 16–20 (2013). http://dx.doi.org/10.1016/j.electacta.2013.01.131
87. 4 prepared by sol—gel method based on citric acid”, Solid State Ionics 176(19–22), 1801–1805 (2005). http://dx.doi.org/10.1016/j.ssi.2005.04.034
88. 4/C composites porosity on their electrochemical performance”, J. Electrochem. Soc. 152(5), A858-A863 (2005). http://dx.doi.org/10.1149/1.1872674
89. A. Peigney, C. Laurent, E. Flahaut, R. R. Bacsa and A. Rousset, “Specific surface area of carbon nanotubes and bundles of carbon nanotubes”, Carbon 39(4), 507–514 (2001). http://dx.doi.org/10.1016/S0008-6223(00)00155-X
90. K. S. Novoselov, A. K. Geim, S. V. Morozov, D. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva and A. A. Firsov, “Electric field effect in atomically thin carbon films”, Science 306(5696), 666–669 (2004). http://dx.doi.org/10.1126/science.1102896
91. A. K. Geim and K. S. Novoselov, “The rise of graphene”, Nat. Mater. 6(3), 183–191 (2007). http://dx.doi.org/10.1038/nmat1849
92. Z.-L. Wang, D. Xu, H.-G. Wang, Z. Wu and X.-B. Zhang, “In situ fabrication of porous graphene electrodes for high-performance energy storage”, ACS Nano 7(3), 2422–2430 (2013). http://dx.doi.org/10.1021/nn3057388
93. L. P. Biro, P. Nemes-Incze and P. Lambin, “Graphene: nanoscale processing and recent applications”, Nanoscale 4(6), 1824–1839 (2012). http://dx.doi.org/10.1039/C1NR11067E
94. O. A. Vargas C, A. Caballero and J. Morales, “Can the performance of graphene nanosheets for lithium storage in Li-ion batteries be predicted?”, Nanoscale 4(6), 2083–2092 (2012). http://dx.doi.org/10.1039/C2NR11936F
95. F. Y. Su, Y. B. He, B. Li, X. C. Chen, C. H. You, W. Wei, W. Lv, Q. H. Yang and F. Kang, “Could graphene construct an effective conducting network in a high-power lithium ion battery?”, Nano Energy 1(3), 429–439 (2012). http://dx.doi.org/10.1016/j.nanoen.2012.02.004
96. F. Y. Su, C. You, Y. B. He, W. Lv, W. Cui, F. Jin, B. Li, Q. H. Yang and F. Kang, “Flexible and planar graphene conductive additives for lithium-ion batteries”, J. Mater. Chem. 20(43), 9644–9650 (2010). http://dx.doi.org/10.1039/C0JM01633K
97. 4 cathode materials for high power lithium ion batteries”, J. Mater. Chem. 21(10), 3353–3358 (2011). http://dx.doi.org/10.1039/c0jm03287e
98. 4/graphene/carbon composite as a performance-improved cathode material for lithium-ion batteries”, Electrochim. Acta. 64(1), 190–195 (2012). http://dx.doi.org/10.1016/j.electacta.2012.01.014
99. 4 mesocrystals for lithium-ion batteries”, Small 7(8), 1127–1135 (2011). http://dx.doi.org/10.1002/smll.201002000
100. 4 composite for high-performance lithium ion batteries”, Nanoscale 5(18), 8647–55 (2013). http://dx.doi.org/10.1039/c3nr02738d
101. 4/C composites as cathode materials for Li-ion batteries with enhanced rate capability”, J. Mater. Chem. 22(32), 16465–16470 (2012). http://dx.doi.org/10.1039/c2jm32649c
102. H. Wang, J. T. Robinson, G. Diankov and H. Dai, “Nanocrystal growth on graphene with various degrees of oxidation”, J. Am. Chem. Soc. 132(10), 3270–3271 (2010). http://dx.doi.org/10.1021/ja100329d
103. Y. Zhu, S. Murali, M. D. Stoller, K. J. Ganesh, W. Cai, P. J. Ferreira, A. Pirkle, R. M. Wallace, K. A. Cychosz, M. Thommes, D. Su, E. A. Stach and R. S. Ruoff, “Carbon-based supercapacitors produced by activation of graphene”, Science 332(6037), 1537–41 (2011). http://dx.doi.org/10.1126/science.1200770
104. 4/graphene hybrid cathodes with enhanced performance for Li-ion batteries”, J. Power Sources 208(15), 340–344(2012). http://dx.doi.org/10.1016/j.jpowsour.2012.02.032
105. 4-graphene as a superior cathode material for rechargeable lithium batteries: impact of stacked graphene and unfolded graphene”, Energ. Environ. Sci. 6(5), 1521–1528 (2013). http://dx.doi.org/10.1039/C3EE24163G
106. R. H. Baughman, A. A. Zakhidov and W. A. de Heer, “Carbon nanotubes—the route toward applications”, Science 297(5582), 787–792 (2002). http://dx.doi.org/10.1126/science.1060928
107. T. W. Ebbesen, H. J. Lezec, H. Hiura, J. W. Bennett, H. F. Ghaemi and T. Thio, “Electrical conductivity of individual carbon nanotubes”, Nature 382(6586), 54–56 (1996). http://dx.doi.org/10.1038/382054a0
108. 4/nitrogen-doped carbon nanotubes composite as a cathode for lithium ion batteries”, J. Mater. Chem. 22(15), 7537–7543 (2012). http://dx.doi.org/10.1039/c2jm30380a
109. H. Liu, Y. Zhang, R. Li, X. Sun, S. Désilets, H. Abou-Rachid, M. Jaidann and L.-S. Lussier, “Structural and morphological control of aligned nitrogen-doped carbon nanotubes”, Carbon 48(5), 1498–1507 (2010). http://dx.doi.org/10.1016/j.carbon.2009.12.045
110. Y. T. Lee, N. S. Kim, S. Y. Bae, J. Park, S.-C. Yu, H. Ryu and H. J. Lee, “Growth of vertically aligned nitrogen-doped carbon nanotubes: control of the nitrogen content over the temperature range 900-1100°C”, J. Phys. Chem. B 107(47), 12958–12963 (2003). http://dx.doi.org/10.1021/jp0274536
111. J. Liu, Y. Zhang, M. I. Ionescu, R. Li and X. Sun, “Nitrogen-doped carbon nanotubes with tunable structure and high yield produced by ultrasonic spray pyrolysis”, Appl. Surf. Sci. 257(17), 7837–7844 (2011). http://dx.doi.org/10.1016/j.apsusc.2011.04.041
112. 4/carbon composite nanofibers as stable and binder-free cathodes for rechargeable lithium-ion batteries”, ACS Appl. Mater. Interfaces 4(3), 1273–1280 (2012). http://dx.doi.org/10.1021/am201527r
113. 4 and carbon nanotube composite”, Chem. Commun. (Camb). 46(38), 7151–3 (2010). http://dx.doi.org/10.1039/c0cc01721c
114. 4 synthesized by a new low-cost aqueous precipitation technique”, J. Power Sources 119–121(1), 247–251 (2003). http://dx.doi.org/10.1016/S0378-7753(03)00241-6
115. 4/C materials”, J. Power Sources 160(1), 570–576 (2006). http://dx.doi.org/10.1016/j.jpowsour.2006.01.042
116. B. Kang and G. Ceder, “Battery materials for ultrafast charging and discharging”, Nature 458(7235), 190–193 (2009). http://dx.doi.org/10.1038/nature07853
117. 4 Li-ion batteries”, J. Power Sources 194(2), 1021–1023 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.05.043
118. G. Ceder and B. Kang, “Response to “unsupported claims of ultrafast charging of Li-ion batteries””, J. Power Sources. 194(2), 1024–1028 (2009). http://dx.doi.org/10.1016/j.jpowsour.2009.07.004