Assessment of friction and wear characteristics of Calophyllum inophyllum and palm biodiesel

Industrial Crops and Products

Volumn 83, Issue , 2016, Pages 470-483

  Mosarof, M H ^a   Kalam, M A ^a   Masjuki, H H ^a   Alabdulkarem, Abdullah ^b   Habibullah, M ^a   Arslan, A ^a   Monirul, I M ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

Biodiesel and biodiesel blends; Energy; Four ball tester; Friction and wear; Tribological properties

Indexed keywords

BIODIESEL; ENGINES; LUBRICATION; TRIBOLOGY; WEAR OF MATERIALS;

BIO-DIESEL BLENDS; ENERGY; FOUR-BALL; FRICTION AND WEAR; TRIBOLOGICAL PROPERTIES;

FRICTION;

AUTOMOBILE; BIOFUEL; DIESEL ENGINE; ENERGY BALANCE; EVERGREEN TREE; EXPERIMENTAL STUDY; FRICTION; LUBRICANT; MAINTENANCE; PERFORMANCE ASSESSMENT; TEMPERATURE EFFECT; TRIBOLOGY; WEAR;

CALOPHYLLUM INOPHYLLUM;

EID: 84958729669     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2015.12.082     Document Type: Article

References (43)

1. Agarwal A.K. Performance Evaluation and Tribological Studies on a Biodiesel-fuelled Compression Ignition Engine. Ph.D. Thesis 1999, Center for Energy Studies, Indian Institute of Technology, Delhi, India, Thesis&.
2. Ahmed A., Masjuki H.H., Varman M., Kalam M.A., Habibullah M., Al Mahmud K.A.H. An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals. Meccanica 2016, 51(1):9-23. 10.1007/s11012-015-0180-6.
3. Arslan A., Masjuki H., Varman M., Kalam A., Mufti R., Gulzar M., Quazi M. Effect of Surface Texture on the Tribological Performance of DLC Coating 2015.
4. Bhale P.V., Deshpande N., Thombre S. Simulation of wear characteristics of cylinder liner-ring combination with diesel and biodiesel. Soc. Automot. Eng. 2008.
5. Bhushan B. Introduction to Tribology 2013, John Wiley & Sons.
6. Chauhan B.S., Kumar N., Cho H.M. A study on the performance and emission of a diesel engine fueled with Jatropha biodiesel oil and its blends. Energy 2012, 37(1):616-622. 10.1016/j.energy.2011.10.043.
7. Fazal M.A., Haseeb A.S.M.A., Masjuki H.H. Investigation of friction and wear characteristics of palm biodiesel. Energy Convers. Manage. 2013, 67(0):251-256. 10.1016/j.enconman.2012.12.002.
8. Habibullah M., Masjuki H., Kalam M. Tribological characteristics of Calophyllum inophyllum based TMP (trimethylolpropane) ester as energy saving and biodegradable lubricant. Tribol. Trans. 2015, 58(6):1002-1011.
9. Habibullah M., Masjuki H.H., Kalam M.A., Zulkifli N.W.M., Masum B.M., Arslan A., Gulzar M. Friction and wear characteristics of Calophyllum inophyllum biodiesel. Ind. Crops Prod. 2015, 76:188-197. 10.1016/j.indcrop.2015.05.042.
10. Haseeb A.S.M.A., Sia S.Y., Fazal M.A., Masjuki H.H. Effect of temperature on tribological properties of palm biodiesel. Energy 2010, 35(3):1460-1464. 10.1016/j.energy.2009.12.001.
11. Havet L., Blouet J., Valloire F.R., Brasseur E., Slomka D. Tribological characteristics of some environmentally friendly lubricants. Wear 2001, 248(1):140-146.
12. Hu J., Du Z., Li C., Min E. Study on the lubrication properties of biodiesel as fuel lubricity enhancers. Fuel 2005, 84(12,13):1601-1606. 10.1016/j.fuel.2005.02.009.
13. Imtenan S., Masjuki H.H., Varman M., Rizwanul Fattah I.M., Sajjad H., Arbab M.I. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Convers. Manage. 2015, 94(0):84-94. 10.1016/j.enconman.2015.01.047.
14. Jayadas N.H., Prabhakaran Nair K.G.A. Tribological evaluation of coconut oil as an environment-friendly lubricant. Tribol. Int. 2007, 40(2):350-354. 10.1016/j.triboint.2005.09.021.
15. Knothe G., Steidley K.R. Kinematic viscosity of biodiesel fuel components and related compounds. Influence of compound structure and comparison to petrodiesel fuel components. Fuel 2005, 84(9):1059-1065. 10.1016/j.fuel.2005.01.016.
16. Konishi T., Klaus E., Duda J. Wear characteristics of aluminum-silicon alloy under lubricated sliding conditions. Tribol. Trans. 1996, 39(4):811-818.
17. Kumar N., Chauhan S. Analysis of tribological performance of biodiesel. Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 2014, 228(7):797-807.
18. Kuss V.V., Kuss A.V., Rosa R.G.d., Aranda D.A.G., Cruz Y.R. Potential of biodiesel production from palm oil at Brazilian Amazon. Renewable Sustain. Energy Rev. 2015, 50(0):1013-1020. 10.1016/j.rser.2015.05.055.
19. Lešnik L., Vajda B., Žunič Z., Škerget L., Kegl B. The influence of biodiesel fuel on injection characteristics, diesel engine performance, and emission formation. Appl. Energ. 2013, 111(0):558-570. 10.1016/j.apenergy.2013.05.010.
20. Lu X., Cotter J., Eadie D. Laboratory study of the tribological properties of friction modifier thin films for friction control at the wheel/rail interface. Wear 2005, 259:1262-1269.
21. Mofijur M., Masjuki H., Kalam M., Atabani A., Fattah I.R., Mobarak H. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Ind. Crops Prod. 2014, 53:78-84.
22. Mofijur M., Masjuki H.H., Kalam M.A., Atabani A.E., Fattah I.M.R., Mobarak H.M. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Ind. Crops Prod. 2014, 53:78-84. 10.1016/j.indcrop.2013.12.011.
23. Patil P.D., Deng S. Optimization of biodiesel production from edible and non-edible vegetable oils. Fuel 2009, 88(7):1302-1306. 10.1016/j.fuel.2009.01.016.
24. Priest M., Taylor C.M. Automobile engine tribology-approaching the surface. Wear 2000, 241(2):193-203. 10.1016/S0043-1648(00) 00375-6.
25. Quazi M., Fazal M., Haseeb A., Yusof F., Masjuki H., Arslan A. Laser-based surface modifications of aluminum and its alloys. Crit. Rev. Solid State Mater. Sci. 2015, 1-26.
26. Rahman S.M.A., Masjuki H.H., Kalam M.A., Abedin M.J., Sanjid A., Sajjad H. Production of palm and Calophyllum inophyllum based biodiesel and investigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions. Energy Conver. Manage. 2013, 76:362-367. 10.1016/j.enconman.2013.07.061.
27. Restrepo-Flórez J.-M., Bassi A., Rehmann L., Thompson M.R. Investigation of biofilm formation on polyethylene in a diesel/biodiesel fuel storage environment. Fuel 2014, 128:240-247. 10.1016/j.fuel.2014.02.052.
28. Shahabuddin M., Masjuki H., Kalam M., Bhuiya M., Mehat H. Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil). Ind. Crops Prod. 2013, 47:323-330.
29. Shehata M.S. Emissions, performance and cylinder pressure of diesel engine fuelled by biodiesel fuel. Fuel 2013, 112(0):513-522. 10.1016/j.fuel.2013.02.056.
30. Silitonga A.S., Masjuki H.H., Mahlia T.M.I., Ong H.C., Chong W.T., Boosroh M.H. Overview properties of biodiesel diesel blends from edible and non-edible feedstock. Renewable Sustain. Energy Rev. 2013, 22(0):346-360. 10.1016/j.rser.2013.01.055.
31. Silitonga A.S., Masjuki H.H., Mahlia T.M.I., Ong H.C., Kusumo F., Aditiya H.B., Ghazali N.N.N. Schleichera oleosa L. oil as feedstock for biodiesel production. Fuel 2015, 156:63-70. 10.1016/j.fuel.2015.04.046.
32. Sperring T., Nowell T. SYCLOPS-a qualitative debris classification system developed for RAF early failure detection centres. Tribol. Int. 2005, 38(10):898-903.
33. Sperring T.P., Nowell T.J. SYCLOPS-a qualitative debris classification system developed for RAF early failure detection centres. Tribol. Int. 2005, 38(10):898-903. 10.1016/j.triboint.2005.03.009.
34. Stachowiak G.P., Stachowiak G.W., Podsiadlo P. Automated classification of wear particles based on their surface texture and shape features. Tribol. Int. 2008, 41(1):34-43. 10.1016/j.triboint.2007.04.004.
35. Syahrullail S., Wira J.Y., Wan Nik W., Fawwaz W. Friction characteristics of RBD palm olein using four-ball tribotester. Appl. Mech. Mater. 2013, 315:936-940.
36. Tsuchiya T., Shiotani H., Goto S., Sugiyama G., Maeda A. Japanese standards for diesel fuel containing 5% FAME: investigation of acid generation in FAME blended diesel fuels and its impact on corrosion. SAE Technical 2006, Paper 2006-01-3303. 10.4271/2006-01-3303.
37. Tung S.C., McMillan M.L. Automotive tribology overview of current advances and challenges for the future. Tribol. Int. 2004, 37(7):517-536. 10.1016/j.triboint.2004.01.013.
38. Van Gerpen J.H., Soylu S., Tat M. Evaluation of the Lubricity of Soybean Oil-based Additives in Diesel fuel 1999.
39. Wain K.S., Perez J.M., Chapman E., Boehman A.L. Alternative and low sulfur fuel options: boundary lubrication performance and potential problems. Tribol. Int. 2005, 38(3):313-319. 10.1016/j.triboint.2004.08.014.
40. Xu Y., Hu X., Yuan K., Zhu G., Wang W. Friction and wear behaviors of catalytic methylesterified bio-oil. Tribol. Int. 2014, 71:168-174.
41. Yamane K., Kawasaki K., Sone K., Hara T., Prakoso T. Oxidation stability of biodiesel and its effects on diesel combustion and emission characteristics. Int. J. Engine Res. 2007, 8(3):307-319.
42. Yang H., Liu Y., Zhang T., Wang H., Tang B., Qiao J. Dry sliding tribological properties of a dendrite-reinforced Zr-based bulk metallic glass matrix composite. J. Materi. Sci. Technol. 2014, 30(6):576-583.
43. Zulkifli N.W.M., Kalam M.A., Masjuki H.H., Shahabuddin M., Yunus R. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy 2013, 54:167-173. 10.1016/j.energy.2013.01.038.