Gas phase embrittlement and time dependent cracking of nickel based superalloys

Energy Materials: Materials Science and Engineering for Energy Systems

Volumn 1, Issue 1, 2006, Pages 59-79

  Woodford, D A ^a  

^a Materials Performance Analysis Inc   (United States)

Author keywords

Creep cavitation; Creep rupture; Ductility minima; Fatigue cracking; Gas phase embrittlement; High temperature alloys; Intergranular fracture; Oxidation; Superalloys

Indexed keywords

CARBIDES; CARBON DIOXIDE; CRACK PROPAGATION; CRACK TIPS; CRACKING (CHEMICAL); CRACKS; CREEP; DUCTILITY; EMBRITTLEMENT; ENERGY CONVERSION; GASES; GRAIN BOUNDARIES; INTERNAL OXIDATION; NICKEL; OXIDATION; OXYGEN; REACTION INTERMEDIATES; TRACE ELEMENTS;

CREEP CAVITATION; CREEP RUPTURES; FATIGUE CRACKING; GASPHASE; INTERGRANULAR FRACTURE;

SUPERALLOYS;

EID: 84958536680     PISSN: 17489237     EISSN: 17489245     Source Type: Journal    
DOI: 10.1179/174892306X99679     Document Type: Review

References (102)

1. M. Gell, G. R. Leverant and C. H. Wells: ‘The fatigue strength of nickel-base superalloys’, ASTM STP 467, 113–153; 1970, Philadelphia, PA, ASTM.
2. K. U. Snowden: Acta Metall., 1964, 12, 295.
3. N. J. Wadsworth and J. Hutchings: Philos. Mag., 1958, 3, 1154.
4. M. R. Achter, G. J. Danek and H. H. Smith: Trans. AIME, 1963, 227, 1296.
5. L. F. Coffin: Proc. Int. Conf. on ‘Fatigue: chemistry, mechanics and microstructure’, 590–600; 1972, Houston, TX, NACE.
6. D. A. Woodford, H. D. Solomon and L. F. Coffin: Proc. 2nd Int. Conf. on ‘Mechanical behavior of materials’, 893–897; 1976, ICMII, Metals Park, OH, ASM.
7. D. A. Woodford and L. F. Coffin Jr.: Proc. 4th Bolton Landing Conf. on ‘The role of grain Boundaries in high temperature fatigue’, 421; 1974, Baton Rouge, Claitors Pub. Div.
8. L. F. Coffin Jr: Metall. Trans., 1972, 3, 1777–1788.
9. C. J. McMahon and L. F. Coffin Jr.: Metall. Trans., 1970, 1, 3443.
10. D. A. Woodford and R. H. Bricknell: Mater. Sci. Technol., 1983, 25, 157–199.
11. M. O. Speidel: in ‘High temperature materials in gas turbines,’ (ed. P. R. Sahm and M. O. Speidel), 207–252; 1974, Amsterdam, The Netherlands, Elsevier Scientific Publishing.
12. P. C. Paris: Proc. 10th Sagamore Army Mater. Res. Conf. on ‘Fatigue – an interdisciplinary approach’, (ed. J. J. Burke et al.), 101–127; 1964, Syracuse, NY, Syracuse University Press.
13. K.-M. Chang, M. F. Henry and M. G. Benz: JOM, 1990, 42, 29–35.
14. H. D. Solomon and L. F. Coffin Jr.: ‘Fatigue at elevated temperatures’, ASTM STP 520, 112; 1973, Philadelphia, PA, ASTM.
15. S. S. Manson: ‘Fatigue at elevated Temperatures’, ASTM STP 520, 744–782; 1973, Philadelphia, PA, ASTM.
16. G. A. Webster and R. A. Ainsworth: ‘High temperature component life assessment’; 1994, London, Chapman and Hall.
17. L. A. James: in ‘Superalloys 718, 625 and 706 and various derivatives’, (ed. E. A. Loria), 499–515; 1989, Warrendale, PA, TMS.
18. S. Floreen: Metall. Trans. A, 1975, 6A, 1741.
19. A. Diboine and A. Pineau: Fatigue Fract. Eng. Mater. Struct., 1987, 10, (2), 141.
20. K. Sadananda and P. Shahinian: J. Eng. Mater. Technol., 1978, 100, 381.
21. K. R. Bain and R. M. Pelloux: Metall. Trans. A, 1984, 15A, 381.
22. J. P. Pedron and A. Pineau: Mater. Sci. Eng., 1982, 56, 143.
23. S. Floreen and R. H. Kane: Fatigue Eng. Mater. Struct., 1980, 2, 401.
24. P. F. Browning: ‘Time dependent crack tip phenomena in gas turbine disk alloys,’ PhD thesis, Rensselaer Polytechnic Institute, Troy, NY, 1998.
25. E. Andrieu, G. Hochstetter, R. Molins and A. Pineau: in ‘Superalloys 718, 625 and 706 and various derivatives’, (ed. E. A. Loria), 619–631; 1994, Warrendale, PA, TMS.
26. S. Floreen and R. Raj: ‘Flow and fracture at elevated temperature’, 383–404; 1983, Warrendale, PA, ASM.
27. K. Sadananda and P. Shaninian: in ‘Creep-fatigue-environment interactions’, (ed. R. M. Pelloux and N. S. Stoloff), 86–111; 1979, Warrendale, PA, TMS–AIME.
28. P. Shahinian and K. Sadananda: Proc. Conf. Superalloys 1984, (ed. M. Gell et al.), 741–750; 1984, Warrendale, PA, TMS–AIME.
29. M. Gao, D. J. Dwyer and R. P. Wei: in ‘Superalloys 718, 625, 707 and derivatives’, (ed. E. A. Loria), 581–592; 1995, Warrendale, PA, TMS.
30. P. Valerio, M. Gao and R. P. Wei: Scr. Metall. Mater., 1995, 32, 1169–1174.
31. J. Rosler, S. Muller, D. Del Genovese and M. Gotting: in ‘Superalloys 718, 625, 706 and various derivatives’, (ed. E. A. Loria), 523–534; 2001, Warrendale, PA, TMS.
32. S. Floreen: in ‘Creep-fatigue-environment interactions’, (ed. R.M. Pelloux and N. S. Stoloff), 112–128; 1979, Warrendale, PA, TMS–AIME.
33. J. A. Pfaendtner and C. J. McMahon: Acta Mater., 2001, 49, 3369–3377.
34. C. J. Smithells and C. E. Ransley: Proc. Roy. Soc. Lond. A, 1936, 155A, 195.
35. P. Hancock and R. Fletcher: Metallurgie, 1966, 6, 1.
36. D. L. Douglass: Mater. Sci. Eng., 1968/69, 3, 255.
37. R. H. Bricknell and D. A. Woodford: Metall. Trans. A, 1981, 12A, 425.
38. D. A. Woodford and R. H. Bricknell: Metall. Trans. A, 1981, 12A, 1945.
39. R. H. Bricknell and D. A. Woodford: Metall. Trans. A, 1981, 12A, 1673.
40. D. A. Woodford: Metall. Trans. A, 1981, 12A, 299.
41. M. Nazmy, M. Staubli and C. Noseda: in ‘Superalloys 718, 625, 706 and derivatives’, (ed. E. A. Loria), 419–424; 1997, Warrendale, PA, TMS.
42. R. H. Bricknell and D. A. Woodford: Metal Sci., 1984, 18, 265–271.
43. J. E. Harris: Acta Metall., 1978, 26, 1033.
44. R. H. Bricknell and D. A. Woodford: Acta Metall., 1982, 30, 257.
45. B. F. Dyson: Acta Metall., 1982, 30, 1639–1646.
46. M. C. Pandey, B. F. Dyson and D. M. R. Taplin: Proc. Roy. Soc. Lond. A, 1984, 393, 1437–1441.
47. R. H. Bricknell, R. A. Mulford and D. A. Woodford: Metall. Trans. A, 1982, 13A, 1223.
48. D. A. Woodford and R. H. Bricknell: Metall. Trans. A, 1981, 12A, 1467.
49. D. A. Woodford and R. H. Bricknell: Scr. Metall., 1983, 17, 1341–1344.
50. J. P. Beckman and D. A. Woodford: Metall. Trans. A, 1990, 21A, 3049–3054.
51. W. H. Chang: ‘Superalloys-processing’, MCIC-72-10, AIME, Littleton, CO, 1972.
52. D. A. Woodford and R. H. Bricknell: Proc. Conf. Superalloys 1980, 633; 1980, Metals Park, OH, ASM.
53. H. H. Bleakney: Can. J. Technol., 1952, 30, 350.
54. H. H. Bleakney: Can. Metal Quart., 1965, 4, 13.
55. R. L. Stegman, P. Shahinian and M. R. Achter: Trans. AIME, 1969, 245, 1759–1763.
56. D. A. Woodford and R. H. Bricknell: Scr. Metall., 1989, 23, 599–601.
57. R. H. Bricknell and D. A. Woodford: in ‘Creep and fracture of engineering materials and structures’, (ed. B. Wilshire and D. R. J. Owen), 249; 1981, Swansea, UK, Pineridge Press.
58. E. C. Scaife and P. L. James: Met. Sci., 1968, 2, 217.
59. D. F. Smith, E. F. Clatworthy, D. G. Tipton and W. L. Mankins: in ‘Superalloys’, (ed. J. K. Tien et al.), 521–530; 1980, Metals Park, OH, ASM.
60. R. W. Hayes, D. F. Smith, E. A. Wanner and J. C. Earthman: Mater. Sci. Eng., 1993, 172, 43–53.
61. T. S. Sudarshan and M. R. Louthan Jr.: Int. Mater. Rev., 1987, 32, 121–151.
62. M. Gao, D. J. Dwyer and R. P. Wei: in ‘Superalloys 718, 625, 706 and various derivatives’, (ed. E. A. Loria), 581–592; 1994, Warrendale, PA, TMS.
63. Z. Huang, C. Iwashita, I. Chou and R. P. Wei: Metall. Trans. A, 2002, 33A, 1681–1687.
64. A. M. Ritter, M. Larsen, E. L. Hall, R. G. Bolon, A. Linsebigler and M. F. Henry: in ‘Superalloys 718, 625, 706 and various derivatives’, (ed. E. A. Loria), 653; 1997, Warrendale, PA, TMS.
65. K.-M. Chang: in ‘Effects of load and thermal histories on mechanical behavior of materials’, (ed. P. K. Liaw and T. Nicholas), 13–26; 1987, Warrendale, PA, TMS.
66. R. Molins, J-C. Chassaigne and E. Andrieu: in ‘Superalloys 718, 625, 706 and various derivatives,’ (ed. E. A. Loria), 655–664, 1997, Warrendale, PA, TMS.
67. S. Jin, N. V. Gayle, C. T. Chen, J. R. Lichamer and C. Ghilarducci: Metall. Trans. A, 1980, 11A, 854–856.
68. R. F. Decker and J. W. Freeman: Trans. AIME, 1960, 218, 277–285.
69. S. Floreen and J. M. Davidson: Metall. Trans. A, 1983, 14A, 895–901.
70. R. T. Holt and W. Wallace: Int. Metal. Rev., 1976, March, 1–24.
71. T. B. Gibbons: Mater. Sci. Technol., 1985, 1, 1033–1036.
72. X. Xie, X. Liu, J. Dong, Y. Hu, Z. Xu, Y. Zhu, W. Luo, Z. Zhang and R. G. Thompson: in ‘Superalloys 718, 625, 706 and various derivatives’, (ed. E. A. Loria), 531–542; 1997, Warrendale, PA, TMS.
73. J. A. Horton, C. G. McKamey, M. K. Miller, W. D. Cao and R. L. Kennedy: in ‘Superalloys 718, 625, 706 and various derivatives’, (ed. E. A. Loria), 401–408; 1997, Warrendale, PA, TMS.
74. M. Nazmy, M. Staubli and C. Noseda: in ‘Superalloys 718, 625, 706 and various derivatives’, (ed. E. A. Loria), 419–424; 1997, Warrendale, PA, TMS.
75. C. L. White, J. H. Schneibel and R. A. Padgett: Metall. Trans. A, 1983, 14A, 595–606.
76. K. Sadananda and P. Shahinian: Metall. Trans. A, 1983, 14A, 1467–1480.
77. L. A. James: Eng. Fract. Mech., 1986, 25, 305–314.
78. J. P. Pedron and A. Pineau: Memoires st Etudes Scientifiques Revue de Metallurgie, 1983, 85, 665–674.
79. R. H. Van Stone: Mater. Sci. Eng. A, 1988, A103, 49–61.
80. K-M. Chang: US patent No. 4,814,023, 1989.
81. S. Muller and J. Rosler: in ‘Life assessment of hot section gas turbine components’, (ed. R. Townsend et al.), 49–60; 1999, London, IOM Communications.
82. J. H. Moll, G. N. Maniar and D. R. Muzyka: Metall. Trans., 1971, 2, 2153–2160.
83. A. B. Middleton, L. B. Pfeil and E. C. Rhodes: J. Inst. Met., 1948–1949, 75, 595.
84. P. A. Beck, M. L. Holzworth and P. Sperry: Trans. AIME, 1949, 180, 163.
85. C. J. Simpson, W. C. Winegard and K. T. Aust: in ‘Grain boundary structure and properties’, (ed. G. A. Chadwick and D. A. Smith), 201–234; 1976, London, Academic Press.
86. D. A. Woodford and D. F. Mowbray: Mater. Sci. Eng., 1974, 16, 5.
87. L. F. Coffin: Proc. Symp. on Creep-fatigue interactions’, 346–363; 1976, New York, ASME–MPC.
88. W. J. Ostergren: J. Test.Eval., 1976, 4, 327–339.
89. S. Majumdar and P. S. Maiya: Proc. 3rd Int. Conf. on ‘Mehanical behavior of materials’, 101; 1979, Cambridge, Pergamon Press.
90. J. Wareing: Metall. Trans. A, 1977, 8A, 711–721.
91. L. M. Kachinov: ‘Advances in creep design’, (ed. A. I. Smith and A. M. Nicolson), 1971, London, Applied Science Publishers.
92. M. Prager and G. Sines: Trans. ASME, 1971, 93, (2), 225–230.
93. R. Molins, J-C. Chassaigne and E. Andrieu: in ‘Superalloys 718, 625, 706 and derivatives’, (ed. E. A. Loria), 655–664, 1997, Warrendale, PA, TMS.
94. M. R. Achter: Scr. Metall., 1968, 2, 525–528.
95. T. Nicholas: in ‘Elevated temperature crack growth’, (ed. S. Mall and T. Nicholas), 107–112; 1990, New York, ASME.
96. H. Ghonem and D. Zheng: Mater. Sci. Eng. A, 1992, A150, 151–160.
97. J. J. McGowan and H. W. Liu: ‘Fatigue-environment and temperature effects’, (ed. J. B. John and V. Weis), 377–390; 1983, New York, Plenum Press.
98. R. J. H. Wanhill: ‘Significance of dwell cracking for IN718 discs’, Report NLR-TP-99392, Nationaal Lucht-en Ruimtevaartlaboratorium, 1999. Author: Please provide the location of the organisation.
99. R. Z. Wang, X. C. Zhang, D. Y. Song and Y. F. Yin: Proc. Int. Conf. on ‘Shot peening’, Paris, France, 395–403; 1981, Institute of Precision Mechanics.
100. E. Hornbogen, M. Thumann and C. Verpoort: Proc. Int. Conf. on ‘Shot peening’, Paris, France, 1981, Institute of Precision Mechanics, Paper 44.
101. M. Tufft: Proc. 7th Int. Conf. on ‘Shot peening’, Warsaw, Poland, 244–253; 1999, Poland, Institute of Precision Mechanics.
102. J. Luo and P. Bowen: Int. J. Fatigue, 2004, 26, 113–124.