Smart manufacturing: Past research, present findings, and future directions

International Journal of Precision Engineering and Manufacturing - Green Technology

Volumn 3, Issue 1, 2016, Pages 111-128

  Kang, Hyoung Seok ^a   Lee, Ju Yeon ^b   Choi, Sangsu ^a   Kim, Hyun ^c   Park, Jun Hee ^c   Son, Ji Yeon ^c   Kim, Bo Hyun ^b   Noh, Sang Do ^a  

^a Sungkyunkwan University   (South Korea)

^b Korea Institute of Industrial Technology   (South Korea)

^c Electronics and Telecommunications Research Institute (ETRI)   (South Korea)

Author keywords

Big Data; Cyber Physical System; Industry 4.0; Internet of Things; Smart Factory; Smart Manufacturing

Indexed keywords

BIG DATA; COMPETITION; CUTTING TOOLS; CYBER PHYSICAL SYSTEM; DECISION MAKING; EMBEDDED SYSTEMS; FLOW CONTROL; INDUSTRY 4.0; INTERNET OF THINGS; MANUFACTURE;

CUTTING EDGE TECHNOLOGY; ENGINEERING DECISION MAKING; KEY TECHNOLOGIES; MANUFACTURING INDUSTRIES; MANUFACTURING TECHNOLOGIES; SMART MANUFACTURING; TECHNOLOGY DEVELOPMENT; TECHNOLOGY ROADMAPS;

INDUSTRIAL RESEARCH;

EID: 84955447916     PISSN: 22886206     EISSN: 21980810     Source Type: Journal    
DOI: 10.1007/s40684-016-0015-5     Document Type: Article

References (105)

1. National Institute of Standard and Technology, "Smart Manufacturing Operations Planning and Control," http://www.nist.gov/el/msid/ syseng/upload/FY2014-SMOPAC-ProgramPlan.pdf (Accessed 20 December 2015)
2. Kagermann, H., Helbig, J., Hellinger, A., and Wahlster, W., "Recommendations for Implementing the Strategic Initiative Industrie 4.0: Securing the Future of German Manufacturing Industry; Final Report of the Industrie 4.0 Working Group," Forschungsunion, 2013.
3. Smart Manufacturing Leadership Coalition, "Implementing 21st century smart manufacturing," https://smartmanufacturingcoalition. org/sites/default/files/implementing-21st-century-smart-manufact uring-report-2011-0pdf (Accessed 20 December 2015)
4. Smart Process Manufacturing Engineering Virtual Organization Steering Committee, "Smart Process Manufacturing: An Operations and Technology Roadmap," https://smartmanufacturingcoalitionorg/ sites/default/files/spm--an-operations-and-technology-roadmappdf (Accessed 20 December 2015)
5. Korea Institute for the Advancement of Technology, "Research Trend of Smart Manufacturing in the U.S.," June, 2014.
6. Roland Berger Strategy Consultants GMBH, "Industry 4.0: The New Industrial Revolution-How Europe will Succeed," http:// wwwrolandbergercom/media/pdf/Roland-Berger-TAB-Industry-4 -0-20140403pdf (Accessed 20 December 2015)
7. Wang, S., Wan, J., Li, D., and Zhang, C., "Implementing Smart Factory of Industrie 4.0: An Outlook," International Journal of Distributed Sensor Networks, Article ID: 681806, 2015.
8. Anderl, I. R., "Industrie 4.0-Advanced Engineering of Smart Products and Smart Production," Proc. of 19th International Seminar on High Technology, 2014.
9. Brettel, M., Friederichsen, N., Keller, M., and Rosenberg, M., "How Virtualization, Decentralization and Network Building Change the Manufacturing Landscape: An Industry 4.0 Perspective," International Journal of Science, Engineering and Technology, Vol. 8, No. 1, pp. 37-44, 2014.
10. Choi, S., Jun, C., Zhao, W. B., and Noh, S. D., "Digital Manufacturing in Smart Manufacturing Systems: Contribution, Barriers, and Future Directions," Advances in production Management Systems: Innovative Production Management towards Sustainable Growth, pp. 21-29, 2015.
11. Radziwon, A., Bilberg, A., Bogers, M., and Madsen, E. S., "The Smart Factory: Exploring Adaptive and Flexible Manufacturing Solutions," Procedia Engineering, Vol. 69, pp. 1184-1190, 2014.
12. Lucke, D., Constantinescu, C., and Westkämper, E., "Smart Factory: A Step towards the Next Generation of Manufacturing," Manufacturing Systems and Technologies for the New Frontier, pp. 115-118, 2008.
13. Zuehlke, D., "Smartfactory-towards a Factory-of-Things," Annual Reviews in Control, Vol. 34, No. 1, pp. 129-138, 2010.
14. Ivanov, D., Dolgui, A., Sokolov, B., Werner, F., and Ivanova, M., "A Dynamic Model and an Algorithm for Short-Term Supply Chain Scheduling in the Smart Factory Industry 4.0," International Journal of Production Research, DOI No. 10.1080/00207543.2014.999958, 2015.
15. Choi, S., Kim, B. H., and Noh, S. D., "A Diagnosis and Evaluation Method for Strategic Planning and Systematic Design of a Virtual Factory in Smart Manufacturing Systems," Int. J. Precis. Eng. Manuf., Vol. 16, No. 6, pp. 1107-1115, 2015.
16. Hellinger, A. and Seeger, H., "Cyber-Physical Systems. Driving Force for Innovation in Mobility, Health, Energy and Production," Acatech Position Paper, National Academy of Science and Engineering, 2011.
17. Geisberger, E. and Broy, M., "Integrierte Forschungsagenda Cyber-Physical Systems," Acatech Position Paper, National Academy of Science and Engineering, 2012.
18. Sztipanovits, J., Ying, S., Cohen, I., Corman, D., Davis, J., et al., "Strategic R&D Opportunities for 21st Century Cyber-Physical Systems," Technical Report for Steering Committee for Foundation in Innovation for Cyber-Physical Systems: Chicago, 2013.
19. Lee, J., Bagheri, B., and Kao, H.-A., "A Cyber-Physical Systems Architecture for Industry 4.0-Based Manufacturing Systems," Manufacturing Letters, Vol. 3, pp. 18-23, 2015.
20. Dworschak, B. and Zaiser, H., "Competences for Cyber-Physical Systems in Manufacturing-First Findings and Scenarios," Procedia CIRP, Vol. 25, pp. 345-350, 2014.
21. Seiger, R., Keller, C., Niebling, F., and Schlegel, T., "Modelling Complex and Flexible Processes for Smart Cyber-Physical Environments," Journal of Computational Science, Vol. 10, pp. 137-148, 2014.
22. Monostori, L., "Cyber-Physical Production Systems: Roots, Expectations and R&D Challenges," Procedia CIRP, Vol. 17, pp. 9-13, 2014.
23. Genge, B., Fovino, I. N., Siaterlis, C., and Masera, M., "Analyzing Cyber-Physical Attacks on Networked Industrial Control Systems," Critical Infrastructure Protection V, pp. 167-183, 2011.
24. Wang, Y., Vuran, M. C., and Goddard, S., "Cyber-Physical Systems in Industrial Process Control," ACM Sigbed Review, Vol. 5, No. 1, Article No. 12, 2008.
25. Niggemann, O., Biswas, G., Kinnebrew, J. S., Khorasgani, H., Volgmann, S., et al., "Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control," http://ceur-wsorg/Vol-1507/dx15paper24pdf (Accessed 30 December 2015)
26. Lee, J., Bagheri, B., and Kao, H.-A., "Recent Advances and Trends of Cyber-Physical Systems and Big Data Analytics in Industrial Informatics," Proc. of International Conference on Industrial Informatics, 2014.
27. Wan, J., Chen, M., Xia, F., Di, L., and Zhou, K., "From Machine-to-Machine Communications towards Cyber-Physical Systems," Computer Science and Information Systems, Vol. 10, No. 3, pp. 1105-1128, 2013.
28. Lu, T., Zhao, J., Zhao, L., Li, Y., and Zhang, X., "Towards a Framework for Assuring Cyber Physical System Security," International Journal of Security&Its Applications, Vol. 9, No. 3, pp. 25-40, 2015.
29. Colombo, A. W., Karnouskos, S., and Bangemann, T., "Towards the Next Generation of Industrial Cyber-Physical Systems," Industrial Cloud-Based Cyber-Physical Systems, pp. 1-22, 2014.
30. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., et al., "Industrial Cloud-Based Cyber-Physical Systems," The IMC-AESOP Approach, 2014.
31. Wu, D., Greer, M. J., Rosen, D. W., and Schaefer, D., "Cloud Manufacturing: Drivers, Current Status, and Future Trends," Proc. of ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, Paper No. V002T002A003, 2013.
32. Wu, D., Greer, M. J., Rosen, D. W., and Schaefer, D., "Cloud Manufacturing: Strategic Vision and State-of-the-Art," Journal of Manufacturing Systems, Vol. 32, No. 4, pp. 564-579, 2013.
33. Wu, D., Rosen, D. W., Wang, L., and Schaefer, D., "Cloud-Based Design and Manufacturing: A New Paradigm in Digital Manufacturing and Design Innovation," Computer-Aided Design, Vol. 59, pp. 1-14, 2015.
34. Ren, L., Zhang, L., Wang, L., Tao, F., and Chai, X., "Cloud Manufacturing: Key Characteristics and Applications," International Journal of Computer Integrated Manufacturing, DOI No. 10.1080/0951192X.2014.902105, 2014.
35. Ren, L., Zhang, L., Tao, F., Zhao, C., Chai, X., et al., "Cloud Manufacturing: From Concept to Practice," Enterprise Information Systems, Vol. 9, No. 2, pp. 186-209, 2015.
36. Wu, D., Rosen, D. W., and Schaefer, D., "Cloud-Based Design and Manufacturing: Status and Promise," Cloud-Based Design and Manufacturing (CBDM), pp. 1-24, 2014.
37. Wu, D., Rosen, D. W., Wang, L., and Schaefer, D., "Cloud-Based Manufacturing: Old Wine in New Bottles?" Procedia CIRP, Vol. 17, pp. 94-99, 2014.
38. Zhang, L., Luo, Y., Tao, F., Li, B. H., Ren, L., et al., "Cloud Manufacturing: A New Manufacturing Paradigm," Enterprise Information Systems, Vol. 8, No. 2, pp. 167-187, 2014.
39. Tao, F., Cheng, Y., Da Xu, L., Zhang, L., and Li, B. H., "CCIoTCMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System," IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1435-1442, 2014.
40. Karnouskos, S., Colombo, A. W., Bangemann, T., Manninen, K., Camp, R., et al., "A SOA-Based Architecture for Empowering Future Collaborative Cloud-Based Industrial Automation," Proc. of IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, pp. 5766-5772, 2012.
41. He, W. and Xu, L., "A State-of-the-Art Survey of Cloud Manufacturing," International Journal of Computer Integrated Manufacturing, Vol. 28, No. 3, pp. 239-250, 2015.
42. Luo, Y., Zhang, L., Tao, F., Ren, L., Liu, Y., et al., "A Modeling and Description Method of Multidimensional Information for Manufacturing Capability in Cloud Manufacturing System," The International Journal of Advanced Manufacturing Technology, Vol. 69, No. 5-8, pp. 961-975, 2013.
43. Laili, Y., Tao, F., Zhang, L., and Sarker, B. R., "A Study of Optimal Allocation of Computing Resources in Cloud Manufacturing Systems," The International Journal of Advanced Manufacturing Technology, Vol. 63, No. 5-8, pp. 671-690, 2012.
44. Wang, L., "Machine Availability Monitoring and Machining Process Planning towards Cloud Manufacturing," CIRP Journal of Manufacturing Science and Technology, Vol. 6, No. 4, pp. 263-273, 2013.
45. Wang, T., Guo, S., and Lee, C.-G., "Manufacturing Task Semantic Modeling and Description in Cloud Manufacturing System," The International Journal of Advanced Manufacturing Technology, Vol. 71, No. 9-12, pp. 2017-2031, 2014.
46. Pisching, M. A., Junqueira, F., Santos Filho, D. J., and Miyagi, P. E., "Service Composition in the Cloud-Based Manufacturing Focused on the Industry 4.0," Technological Innovation for Cloud-Based Engineering Systems, pp. 65-72, 2015.
47. Lee, J., Kao, H.-A., and Yang, S., "Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment," Procedia CIRP, Vol. 16, pp. 3-8, 2014.
48. Lee, J., Lapira, E., Bagheri, B., and Kao, H.-A., "Recent Advances and Trends in Predictive Manufacturing Systems in Big Data Environment," Manufacturing Letters, Vol. 1, No. 1, pp. 38-41, 2013.
49. Shahbaz, M., Masood, S. A., Shaheen, M., and Khan, A., "Data Mining Methodology in Perspective of Manufacturing Databases," Life Science Journal, Vol. 9, No. 3, pp. 13-22, 2012.
50. Shao, G., Brodsky, A., Shin, S.-J., and Kim, D. B., "Decision Guidance Methodology for Sustainable Manufacturing Using Process Analytics Formalism," Journal of Intelligent Manufacturing, pp. 1-18, 2014.
51. Ündey, C., Ertunç, S., Mistretta, T., and Looze, B., "Applied Advanced Process Analytics in Biopharmaceutical Manufacturing: Challenges and Prospects in Real-Time Monitoring and Control," Journal of Process Control, Vol. 20, No. 9, pp. 1009-1018, 2010.
52. Meidan, Y., Lerner, B., Rabinowitz, G., and Hassoun, M., "Cycle-Time Key Factor Identification and Prediction in Semiconductor Manufacturing Using Machine Learning and Data Mining," IEEE Transactions on Semiconductor Manufacturing, Vol. 24, No. 2, pp. 237-248, 2011.
53. Bagchi, S., Baseman, R. J., Davenport, A., Natarajan, R., Slonim, N., et al., "Data Analytics and Stochastic Modeling in a Semiconductor Fab," Applied Stochastic Models in Business and Industry, Vol. 26, No. 1, pp. 1-27, 2010.
54. Gröger, C., Niedermann, F., and Mitschang, B., "Data Mining-Driven Manufacturing Process Optimization," Proc. of the World Congress on Engineering, Vol. 3, pp. 4-6, 2012.
55. Çiflikli, C. and Kahya-Özyirmidokuz, E., "Implementing a Data Mining Solution for Enhancing Carpet Manufacturing Productivity," Knowledge-Based Systems, Vol. 23, No. 8, pp. 783-788, 2010.
56. Shin, S.-J., Woo, J., and Rachuri, S., "Predictive Analytics Model for Power Consumption in Manufacturing," Procedia CIRP, Vol. 15, pp. 153-158, 2014.
57. Zhong, R. Y., Lan, S., Xu, C., Dai, Q., and Huang, G. Q., "Visualization of RFID-Enabled Shopfloor Logistics Big Data in Cloud Manufacturing," The International Journal of Advanced Manufacturing Technology, pp. 1-12, 2015.
58. ITU, "Internet of Things Global Standards Initiative," http:// wwwituint/en/ITU-T/gsi/iot/Pages/defaultaspx (Accessed 20 December 2015)
59. Williams, J., "Harvard Business Review Internet of Things: Science Fiction or Business Fact (Report and Resources)," Verizon, 2014.
60. Vermesan, O. and Friess, P., "Internet of Things: Converging Technologies for Smart Environments and Integrated Ecosystems," River Publishers, 2013.
61. Lopez Research LLC, "An Introduction to the Internet of Things(IoT)," https://wwwciscocom/web/solutions/trends/iot/ introduction-to-IoT-novemberpdf (Accessed 20 December 2015)
62. Gérald, S., "The Internet of Things: Between the Revolution of the Internet and the Metamorphosis of Objects," http://cordiseuropaeu/ fp7/ict/enet/documents/publications/iot-between-the-internetrevolution. pdf (Accessed 20 December 2015)
63. Mattern, F. and Floerkemeier, C., "From the Internet of Computers to the Internet of Things," From Active Data Management to Event-Based Systems and More, pp. 242-259, 2010.
64. Cognizant, "Reaping the Benefits of the Internet of Things," http:// wwwcognizantcom/InsightsWhitepapers/Reaping-the-Benefits-ofthe-Internet-of-Thingspdf (Accessed 20 December 2015)
65. Löffler, M. and Tschiesner, A., "The Internet of Things and the Future of Manufacturing," http://wwwfuturenauticscom/wpcontent/ uploads/2013/10/Internet-of-Things-and-future-ofmanufacturing. pdf (Accessed 20 December 2015)
66. Da Xu, L., He, W., and Li, S., "Internet of Things in Industries: A Survey," IEEE Transactions on Industrial Informatics, Vol. 10, No. 4, pp. 2233-2243, 2014.
67. Bi, Z., Da Xu, L., and Wang, C., "Internet of Things for Enterprise Systems of Modern Manufacturing," IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1537-1546, 2014.
68. Dias, R. A., Mendonça, I. T., and Regis, A., "Integrated Manufacturing Management Using Internet of Things," International Journal of Computer Applications, Vol. 51, No. 11, pp. 20-25, 2012.
69. Guinard, D., Trifa, V., Karnouskos, S., Spiess, P., and Savio, D., "Interacting with the Soa-Based Internet of Things: Discovery, Query, Selection, and On-Demand Provisioning of Web Services," IEEE Transactions on Services Computing, Vol. 3, No. 3, pp. 223-235, 2010.
70. Tao, F., Zuo, Y., Da Xu, L., and Zhang, L., "IoT-Based Intelligent Perception and Access of Manufacturing Resource toward Cloud Manufacturing," IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1547-1557, 2014.
71. Zhang, Y., Zhang, G., Wang, J., Sun, S., Si, S., et al., "Real-Time Information Capturing and Integration Framework of the Internet of Manufacturing Things," International Journal of Computer Integrated Manufacturing, DOI No. 10.1080/0951192X.2014. 900874, 2014.
72. Butala, P., Vrabiè, R., and Oosthuizen, G., "Distributed Manufacturing Systems and the Internet of Things: A Case Study," https://ujdigispaceujacza/bitstream/handle/10210/13015/565-2012-1-PBpdf?sequence=1&isAllowed=y (Accessed 20 December 2015)
73. Chris, T. and Steven, A., "Wireless Sensor Networks: Principles and Applications," Retrieved, 2011.
74. Zhuang, L., Goh, K. M., and Zhang, J.-B., "The Wireless Sensor Networks for Factory Automation: Issues and Challenges," Proc. of IEEE Conference on Emerging Technologies and Factory Automation, pp. 141-148, 2007.
75. Flammini, A., Ferrari, P., Marioli, D., Sisinni, E., and Taroni, A., "Wired and Wireless Sensor Networks for Industrial Applications," Microelectronics Journal, Vol. 40, No. 9, pp. 1322-1336, 2009.
76. Chi, Q., Yan, H., Zhang, C., Pang, Z., and Da Xu, L., "A Reconfigurable Smart Sensor Interface for Industrial WSN in IoT Environment," IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1417-1425, 2014.
77. Zhang, Y., Qu, T., Ho, O. K., and Huang, G. Q., "Agent-Based Smart Gateway for RFID-Enabled Real-Time Wireless Manufacturing," International Journal of Production Research, Vol. 49, No. 5, pp. 1337-1352, 2011.
78. Zhang, Y., Huang, G. Q., Qu, T., Ho, O., and Sun, S., "Agent-Based Smart Objects Management System for Real-Time Ubiquitous Manufacturing," Robotics and Computer-Integrated Manufacturing, Vol. 27, No. 3, pp. 538-549, 2011.
79. Lee, S. C., Jeon, T. G., Hwang, H.-S., and Kim, C.-S., "Design and Implementation of Wireless Sensor Based-Monitoring System for Smart Factory," Computational Science and Its Applications-ICCSA 2007, pp. 584-592, 2007.
80. Wright, P., Dornfeld, D., and Ota, N., "Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNS)," Transactions of NAMRI/SME, Vol. 36, pp. 177-183, 2008.
81. Kortuem, G., Alford, D., Ball, L., Busby, J., Davies, N., et al., "Sensor Networks or Smart Artifacts? An Exploration of Organizational Issues of an Industrial Health and Safety Monitoring System," Springer, pp. 465-482, 2007.
82. Pal, D., Patil, N., Nikoukar, M., Zeng, K., Kutty, K. H., et al., "An Integrated Approach to Cyber-Enabled Additive Manufacturing using Physics Based, Coupled Multi-Scale Process Modeling," Proc. of SFF Symposium, pp. 12-14, 2013.
83. Campbell, I., Bourell, D., and Gibson, I., "Additive Manufacturing: Rapid Prototyping Comes of Age," Rapid Prototyping Journal, Vol. 18, No. 4, pp. 255-258, 2012.
84. Huang, Y. and Leu, M. C., "Frontiers of Additive Manufacturing Research and Education," http://plazaufledu/yongh/2013NSFAM WorkshopReportpdf (Accessed 20 December 2015)
85. Wong, K. V. and Hernandez, A., "A Review of Additive Manufacturing," ISRN Mechanical Engineering, Vol. 2012, Article ID: 208760, 2012.
86. Huang, S. H., Liu, P., Mokasdar, A., and Hou, L., "Additive Manufacturing and Its Societal Impact: A Literature Review," The International Journal of Advanced Manufacturing Technology, Vol. 67, No. 5-8, pp. 1191-1203, 2013.
87. Berman, B., "3-D Printing: The New Industrial Revolution," Business Horizons, Vol. 55, No. 2, pp. 155-162, 2012.
88. Espalin, D., Muse, D. W., MacDonald, E., and Wicker, R. B., "3D Printing Multifunctionality: Structures with Electronics," The International Journal of Advanced Manufacturing Technology, Vol. 72, No. 5-8, pp. 963-978, 2014.
89. Kerbrat, O., Mognol, P., and Hascoët, J.-Y., "A New DFM Approach to Combine Machining and Additive Manufacturing," Computers in Industry, Vol. 62, No. 7, pp. 684-692, 2011.
90. Witherell, P., Feng, S., Simpson, T. W., Saint John, D. B., Michaleris, P., et al., "Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models," Journal of Manufacturing Science and Engineering, Vol. 136, Paper No. MANU-14-1275, 2014.
91. Lu, Y., Choi, S., and Witherell, P., "Towards an Integrated Data Schema Design for Additive Manufacturing: Conceptual Modeling," Proc. of the ASME International Design Engineering Technical Conferences&Computers and Information in Engineering Conference, 2015.
92. Seow, Y. and Rahimifard, S., "A Framework for Modelling Energy Consumption within Manufacturing Systems," CIRP Journal of Manufacturing Science and Technology, Vol. 4, No. 3, pp. 258-264, 2011.
93. Vijayaraghavan, A. and Dornfeld, D., "Automated Energy Monitoring of Machine Tools," CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 21-24, 2010.
94. Duflou, J. R., Sutherland, J. W., Dornfeld, D., Herrmann, C., Jeswiet, J., et al., "Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach," CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 587-609, 2012.
95. Herrmann, C., Thiede, S., Kara, S., and Hesselbach, J., "Energy Oriented Simulation of Manufacturing Systems-Concept and Application," CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 45-48, 2011.
96. Rahimifard, S., Seow, Y., and Childs, T., "Minimising Embodied Product Energy to Support Energy Efficient Manufacturing," CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 25-28, 2010.
97. Herrmann, C. and Thiede, S., "Process Chain Simulation to Foster Energy Efficiency in Manufacturing," CIRP Journal of Manufacturing Science and Technology, Vol. 1, No. 4, pp. 221-229, 2009.
98. Weinert, N., Chiotellis, S., and Seliger, G., "Methodology for Planning and Operating Energy-Efficient Production Systems," CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 41-44, 2011.
99. Mouzon, G., Yildirim, M. B., and Twomey, J., "Operational Methods for Minimization of Energy Consumption of Manufacturing Equipment," International Journal of Production Research, Vol. 45, No. 18-19, pp. 4247-4271, 2007.
100. Katsutomo, T., Hiroshi, W., and Akira, E., "Enerize E3 Factory Energy Management System," Yokogawa Technical Report English Edition, Vol. 53, No. 1, pp. 23-26, 2010.
101. Endo, M., Nakajima, H., and Hata, Y., "Simplified Factory Energy Management System Based on Operational Condition Estimation by Sensor Data," Proc. of IEEE International Conference on Automation Science and Engineering (CASE), pp. 14-19, 2012.
102. Hetzler, J., Beder, S., and Feldmann, H., "Hologram and Method of Manufacturing an Optical Element Using a Hologram," US Patent, No. 7848031 B2, 2010.
103. Schillke, F., Beder, S., and Hetzler, J., "Method of Manufacturing an Optical Element using a Hologram," US Patent, No. 7061626 B1, 2006.
104. Nee, A. Y. C., Ong, S. K., Chryssolouris, G., and Mourtzis, D., "Augmented Reality Applications in Design and Manufacturing," CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 657-679, 2012.
105. Smart Manufacturing Leadership Coalition, "SMLC Forum: Priorities, Infrastructure, and Collaboration for Implementation of Smart Manufacturing," https://smartmanufacturingcoalitionorg/sites/ default/files/smlc-forum-report-vf-0pdf (Accessed 20 December 2015)