Measurements in a turbine cascade over a contoured endwall: Discrete hole injection of bleed flow

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 2000, Pages

  Oke, Rohit A ^a   Simon, Terrence W ^a   Burd, Steven W ^b   Vahlberg, Rickard ^c  

^a UNIVERSITY OF MINNESOTA   (United States)

^b PRATT AND WHITNEY   (United States)

^c ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

AIRFOILS; CHARGE INJECTION; COOLANTS; FLOW OF FLUIDS; HEAT TRANSFER; MIXING; ROTATIONAL FLOW; STREAM FLOW;

COOLANT FLOW RATES; FLOW FIELD MEASUREMENT; HIGH FREE-STREAM TURBULENCE; HOLE INJECTION; HOT WIRE ANEMOMETRY; MIXING EFFECTS; TRIPLE SENSORS; TURBINE CASCADE;

SHEAR FLOW;

EID: 84955313032     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2000-GT-0214     Document Type: Conference Paper

References (37)

1. Ames, F.E., 1994, "Experimental Study of Vane Heat transfer and Aerodynamics at Elevated Level of Turbulence," NASA, CR-4633.
2. Belik, L., 1975, "Secondary Losses in Turbine Blade Cascade with Low Aspect Ratio and Large Deflection," Proceedings of the 6th Conference on Steam Turbines of Large-Power Output, Plzen, Czechoslovakia.
3. Biesinger, T.E., and Gregory-Smith, D.G., 1993, "Reduction in Secondary Flows and Losses in a Turbine Cascade by Upstream Boundary Layer Blowing," ASME Paper 93-GT-114.
4. Burd, S.W., 1996, "Experiments in Film Cooling with Various Coolant Delivery Geometries," Masters Thesis, Department of Mechanical Engineering, University of Minnesota.
5. Burd, S.W., 1998, "Secondary Flow and Heat Transfer Control in Gas Turbine Inlet Nozzle Guide Vane," Ph.D. Thesis, University of Minnesota.
6. Burd, S.W., and Simon, T.W., 2000a, "Flow Measurements in a Nozzle Guide Vane Passage with a Low Aspect Ratio and Endwall Contouring," ASME Paper 00-GT-0213.
7. Burd, S.W., and Simon, T.W., 2000b, "Effects of Bleed Injection on Nozzle Guide Vane Performance: Part I Flow Field Measurements," ASME Paper 00-GT-0199.
8. Burd, S.W., Satterness, C.J., and Simon, T.W., 2000c, "Effects of Bleed Injection on Nozzle Guide Vane Performance: Part II Thermal Measurements," ASME Paper 00-GT-0200.
9. Chung, J.T., 1992, "Flow and Heat Transfer Experiments in the Turbine Airfoil/Endwall Region," Ph.D. Thesis, Department of Mechanical Engineering, University of Minnesota.
10. Chung, J.T., and Simon, T.W., 1990, "Three-Dimensional Flow near the Blade/Endwall Junction of a Gas Turbine: Visualization in a Large-Scale Cascade Simulator," ASME Paper 90-WA/HT-4.
11. Chung, J.T., and Simon, T.W., 1991, "Three-Dimensional Flow near the Blade/Endwall Junction of a Gas Turbine: Application of a Boundary Layer Fence," ASME 91-GT-45.
12. Deich, M.E., Zaryankin, A.E., Fillipov, G.A., and Zatsepin, M.F., 1960, "Method of Increasing the Efficiency of Turbine Stages and Short Blades," Teploenergetika, No. 2., Ferbuary, Translation No. 2816, Associated Electrical Industries (Manchester) Ltd., April 1960.
13. Eckerle, W.A., and Langston, L.S., 1987, "Horseshoe Vortex Formation Around a Cylinder," J. of Turbomachinery, Vol. 109, pp. 278-285.
14. Ewen, J.S., Huber, F.W., and Mitchell, J.P., 1973, Investigation of the Aerodynamic Performance of Small Axial Turbines," ASME Paper 73-GT-3.
15. Gaugler, R.E. and Russel, L.M., 1980, "Streakline Flow Visualisation Study of a Horseshoe Vortex in a Large-Scale, Two-Dimensional Turbine Stator Cascade," ASME paper 80-GT-4.
16. Georgiou, D.P., Papavasilopoulos, V.A., and Alevisos, M., 1996, "Experimental Contribution on the Significance and the Control by Transverse Injection of the Horseshoe Vortex," ASME Paper 96-GT-255.
17. Goldstein, R.J., and Spores, R.A., 1988, "Turbulent Transport on the Endwall in the Region Between Adjacent Turbine Blades," ASME J. of Heat Transfer, Vol. 110, pp. 862-869.
18. Hartland, J.C., Gregory-Smith, D.G., and Rose, M.G., 1998, "Non-Axisymmetric Endwall Profiling in a Turbine Rotor Blade," ASME Paper 98-GT-525.
19. Herzig, H.Z., Hansen, A.G., and Costello, G.R., 1954, "Visualization Study of Secondary Flow in Cascades," NACA TN 1163.
20. Kang, M.B., and Thole, K.A., 1999, "Flowfield Measurements in the Endwall Region of a Stator Vane," ASME Paper 99-GT-188.
21. Kawai, T., Shinoki, S., and Adachi, T., 1989, "Secondary Flow Control and Loss Reduction in a Gas Turbine Cascade Using Endwall Fences," JSME Intl. Journal, Series II-Fluids Engineering, Heat Transfer, Power, Combustion, Thermophysical Properties, Vol. 32, No. 3, pp. 375-387.
22. Kawai, T., Shinoki, S., and Adachi, T., 1990a, "Visualization Study of Three-Dimensional Flows in a Turbine Cascade Endwall Region," JSME Intl. Journal, Series II-Fluid Engineering, Heat Transfer, Power, Combustion, Thermophysical Properties, Vol. 33, No, 2, pp. 256-264.
23. Kawai, T., Shinoki, S., and Adachi, T., 1990a, "Improvement in Turbine Blade Aerodynamic Force in the Tip Region," JSME Intl. Journal, Series II-Fluid Engineering, Heat Transfer, Power, Combustion, Thermophysical Properties, Vol. 33, No, 3, pp. 517-524.
24. Kinnear, I.S., May, A.L., and Wall, R.A., 1980, "Secondary Flow Control in Axial Flow Machines," UK Patent Application GB 2 042 675 A.
25. Kline, S.J., and McClintock, F.A., 1953, "Describing Uncertainties in Single Sample Experiments," Mechanical Eng., January, pp. 3-8.
26. Kopper, F.C., Milano, R., and Vanco, M., 1981, "Experimental Investigation of Endwall Profiling in a Turbine Vane Cascade," AIAA Journal, Col. 19, No. 8, pp. 1033-1040.
27. Langston, L.S., 1980, "Crossflow in a Turbine Cascade Passage," J. of Engineering for Power, Vol. 102, 4, pp. 866-874.
28. Laufer, J., 1953, "The Structure of Turbulence in Fully-Developed Pipe Flows," NACA Report 1174.
29. Morris, A.W.H., and Hoare, R.G., 1975, "Secondary Loss Measurements in a Cascade of Turbine Blades with Meridional Wall Profiling," ASME paper 75-WA/GT-13.
30. Oke, R.A., 1998, "Measurements in Film Cooling with Lateral and Compound Injection: Thermal and Fluid Measurements," Masters Thesis, Department of Mechanical Engineering, University of Minnesota.
31. Prumper, H., 1972, "Application of Boundary Layer Fences in Turbomachinery," AGARDograph No. 164, Paper II-3, pp. 311-331.
32. Radomsky, R.W., and Thole, K.A., 1999, "Flowfield Measurements for a Highly Turbulent Flow in a Stator Vane Passage," ASME Paper, 99-GT-253.
33. Sharma, O.P., and Butler, T.L., 1987, "Predictions of Endwall Losses and Secondary Flows in Axial Flow Turbine Cascades," J. Turbomachinery, Vol. 109, pp. 229-236.
34. Solar Team-Glezer, B., Bedrosyan, L., and Zhang, L., 1997, Solar Turbines Incorporated, San Diego, CA.
35. Wang, L. 1996, "A Study on Gas Turbine Flows, Turbulence Generation, and Film Cooling Flow Measurements," M.S. Thesis, Department of Mechanical Engineering, University of Minnesota.
36. Yan, J., Gregory-Smith, D.G., and Qalker, P.J., 1999, "Secondary Flow Reduction in a Nozzle Vane Cascade by Non-Axisymmetric Endwall Profiling," ASME Paper 99-GT-339.
37. Zunino, P., Ubaldi, M., and Satta, A., 1987, "Measurements of Secondary Flows and Turbulence in a Turbine Cascade Passage," ASME Paper 87-GT-132.