A comparison of two finite element reduction techniques for mistuned bladed-disks

Proceedings of the ASME Turbo Expo

Volumn 4, Issue , 2000, Pages

  Moyroud, François ^a   Fransson, Torsten ^a   Jacquet Richardet, Georges ^b  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

[No Author keywords available]

Indexed keywords

BEAMS AND GIRDERS; COMPUTATIONAL EFFICIENCY; MODAL ANALYSIS; TURBOMACHINE BLADES; VIBRATION ANALYSIS;

AEROELASTIC STABILITY; COMPUTATIONALLY EFFICIENT; FORCED RESPONSE ANALYSIS; INDUSTRIAL ENVIRONMENTS; MISTUNED BLADED DISKS; REDUCED ORDER MODELS; REDUCTION TECHNIQUES; STRUCTURAL CHARACTERISTICS;

FINITE ELEMENT METHOD;

EID: 84955290800     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/1.1415741     Document Type: Conference Paper

References (28)

1. Allemang, R. and Brown, D. (1986). A Correlation Coefficient for Modal Vector Analysis. In Proceeding of the 1st International Modal Analysis Conference, Orlando.
2. Berthillier, M., Dupont, C., Chanez, P., and Saurat, F. (1998). Réponse Forcée Aéroélastique des Aubes de Turbomachines. Revue Française de Mécanique, (4):265-275.
3. Bladh, R., Castanier, M., and Pierre, C. (1998). Reduced Order Modeling and Vibration Analysis of Mistuned Bladed-Disk Assemblies with Shrouds. New York (USA): ASME. ASME Paper 98-GT-484.
4. Cai, C. and Lin, Y. (1992). Statistical Distribution of Frequency Response in Disordered Periodic Structures. AIAA Journal, 30(5):1400-1407.
5. Castanier, M., Ottarsson, G., and Pierre, C. (1997). A Reduced-Order Modeling Technique for Mistuned Bladed-Disks. ASME Journal of Vibration and Acoustics, 119(3):439-447.
6. Craig, R. and Bampton, M. (1968). Coupling of Substructures for Dynamic Analyses. AIAA Journal, 6(7):1313-1319.
7. Ewins, D. (1991). The Effects of Blade Mistuning on Vibration Response - A Survey. In Forced Vibrations of Turbomachine Blades, 8th IFToMM Congress Proceeding, Prague, CSFR, pages 1-9.
8. Huang, W. (1981). Free Forced Vibration of Closely Coupled Turbomachinery Blades. AIAA Journal, 19(7):918-924.
9. Huang, W. (1982). Vibration of Some Structures with Periodic Random Parameters. AIAA Journal, 20(7):1001-1008.
10. Irretier, H. (1983). Spectral Analysis of Mistuned Bladed-Disk Assemblies by Component Mode Synthesis. In Vibrations of Bladed Disk Assemblies, Proceedings of the ASME 9th Biennal Conference on Mechanical Vibration and Noise, Dearborn, Michigan.
11. Jacquet-Richardet, G., Ferraris, G., and Rieutord, P. (1996). Frequencies and modes of rotating flexible bladed disc-shaft assemblies: A global cyclic symmetric approach. Journal of Sound and Vibration, 191(5):901-915.
12. Jacquet-Richardet, G., Moyroud, F., and Fransson, T. (1997). An Influence of Shroud Design on the Dynamic and Aeroelastic Behaviours of Bladed-Disk Assemblies. New York (USA): ASME. ASME Paper 97-GT-191.
13. Kenyon, J. and Minkiewicz, G. (1998). Mistuning Characteristics of a Bladed Rotor from a Two-stage Transonic Compressor. Reston (USA): AIAA. AIAA Paper 98-3721.
14. Kruse, M. and Pierre, C. (1996a). Dynamic Response of an Industrial Turbomachinery Rotor. In Proceedings of the 37th AIAA/ASME Structures, Structural Dynamics, and Materials Conference, Salt Lake City, Utah, USA, pages 1-10.
15. Kruse, M. and Pierre, C. (1996b). Forced Response of Mistuned Bladed-Disks Using Reduced-Order Modelling. In Proceedings of the 37th AIAA/ASME Structures, Structural Dynamics, and Materials Conference, Salt Lake City, Utah, pages 1-10.
16. Kruse, M. and Pierre, C. (1997a). An Experimental Investigation of Vibration Localization in Bladed-Disks, Part I: Free Response. New York (USA): ASME. ASME Paper 97-GT-501.
17. Kruse, M. and Pierre, C. (1997b). An Experimental Investigation of Vibration Localization in Bladed-Disks, Part II: Forced Response. New York (USA): ASME. ASME Paper 97-GT-502.
18. Lin, C.-C. (1994). Forced Response of Mistuned Bladed Disks: Identification and Prediction. PhD thesis, Arizona State University, USA. 164 p.
19. Mignolet, M. and Lin, C. (1993). The Combined Closed Form Perturbation Approach to the Analysis of Mistuned Bladed Disks. ASME Journal of Turbomachinery, 115(4):771-780.
20. Mignolet, M. and Lin, C.-C. (1996). A Novel Limit Distribution for the Analysis of Randomly Mistuned Bladed Disks. New York (USA): ASME. ASME Paper 96-GT-414.
21. Moyroud, F. (1998). Fluid-Structure Integrated Computational Methods for Turbomachinery Blade Flutter and Forced Response Predictions. PhD thesis, Royal Institute of Technology / Institute National des Sciences Appliquées. 300 p.
22. Moyroud, F., Jacquet-Richardet, G., and Fransson, T. (1996). A Modal Coupling of Fluid and Structure Analyses for Turbomachine Flutter. Application to a Fan Stage. New York (USA): ASME. ASME Paper 96-GT-335.
23. Sinha, A. (1986). Calculating the Statistics of Forced Response of a Mistuned Bladed Disk Assembly. AIAA Journal, 24(11):1797-1801.
24. Slater, J. and Blair, A. (1996). A Design Strategy for Preventing High Cycle Fatigue by Minimizing Sensitivity of Bladed-Disks to Mistuning. Technical report, Wright State University, Mechanical Engineering Materials Science and Engineering, Dayton, Ohio, USA.
25. Slater, J., Minkiewicz, G., and Blair, A. (1999). Forced Response of Bladed Disk Assemblies - A Survey. The Shock and Vibration Digest, 31(1):17-24.
26. Wei, S.-T. (1988). Effects of Structural Irregularities on the Dynamics of Cyclic Structures. Ph.D. Dissertation, University of Michigan, USA. 159 p.
27. Yang, M.-T. and Griffin, J. (1997). A Reduced Order Approach for the Vibration of Mistuned Bladed-Disk Assemblies. ASME Journal of Engineering for Gas Turbines and Power, 119(1):161-167.
28. Yang, M.-T. and Griffin, J. (1999). A Reduced Order Model of Mistuning Using a Subset of Nominal System Modes. New York (USA): ASME. ASME Paper 99-GT-288.