A comparative study of optimisation methods for aerodynamic design of turbomachinery blades

Proceedings of the ASME Turbo Expo

Volumn 1, Issue , 2000, Pages

  Shahpar, Shahrokh ^a  

^a ROLLS ROYCE PLC   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; DESIGN; MACHINE DESIGN; NAVIER STOKES EQUATIONS; NOZZLE DESIGN; OPTIMIZATION; SENSITIVITY ANALYSIS; TURBOMACHINE BLADES;

AERODYNAMIC DESIGNS; COMPARATIVE STUDIES; COMPUTATIONAL COSTS; GEOMETRICAL CONSTRAINTS; LINEAR SENSITIVITY ANALYSIS; OPTIMISATION METHOD; THREE-DIMENSIONAL DESIGNS; TURBINE NOZZLES;

AERODYNAMICS;

EID: 84955086998     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2000-GT-0523     Document Type: Conference Paper

References (35)

1. Cravero, C. and Dawes, W.N., 1997, "Throughflow Design Using An Automatic Optimisation Strategy", ASME 97-GT-294.
2. Darnle, S., Dang, T., Stringham, J., and Razinsky, E., 1998, "Practical Use of 3D Inverse Method For Compressor Blade Design", ASME 98-GT-115.
3. Demeulenaere, A. and Van den Braembussche, R.A., 1998, "Three-Dimensional Inverse Design Method for Turbine and Compressor Blades", Proceedings ofRTO AVT symposium on "Design Principles and Methods for Aircraft Gas Turbine Engines", Toulouse, France, May 1998.
4. Dennis, B.H., Dulikravieh, G. S. and Han, Z-X., 1999, "Constrained Shape Optimization of Airfoil Cascades using a Navier-Stokes Solver and a Genetic/SQP Algorithm", ASME 99-GT-441.
5. Dulikravieh, G. S., 1995, "Shape Inverse Design and Optimization for Three-Dimensional Aerodynamics", AIAA paper 95-0695.
6. Engincous Software Inc., 1999, "iSIGHT Designer's Guide", Version 4.05.
7. Fujii, K. and Dulikravich, G. S. (editors), 1999, "Recent Development of Aerodynamic Design Methodologies-Inverse Design and Optimization", Vieweg Series on Notes on Numerical Fluid Mechanics, Springer.
8. Giannakoglou, K.C., 1999, "Designing Turbomaehinery Blades Using Evolutionary Methods", ASME 99-GT-! 81.
9. Goel, S., Cofer, J.I., and Singh, H., 1996, "Turbine Airfoil Design Optimization", ASME 96-GT-158.
10. Goel, S., Hajela, P., 1998, "Turbine Aerodynamic Design Using Reinforcement Learning Based Optimization", AIAA-98-4774.
11. Goldberg, D.E., 1989, "Genetic Algorithms in Search, Optimisation, and Machine Learning, Addison-Wesley, Reading, MA.
12. Hartland, J.C., Gregory-Smith, D.G., Harvey, N.W. and Rose, M.G., 1999, "Non-Axisymmetric Turbine End Wall Design: Part I/, Experimental Validation", ASME 99-GT-338.
13. Harvey, N.W., Rose, M.G., Coupland, J. and Jones, T.V.J., 1998, "Measurment and Calculation of Nozzle Guide Vane Heat Transfer", ASME 98-GT-66.
14. Harvey, N.W., Rose, M., Taylor, M.D., Shahpar, S., Hartland, J., and Gregory-Smith, D.G., 1999, "Non-Axisyrnmetrie Turbine End Wall Design: Part I Three-dimensional Linear Design System", ASME 99-GT-337.
15. Holland, J. H., 1973, "Genetic algorithms and the Optimal Allocation of Trials", SIAM Journal on Computing, Vol. 2, No. 2, 1973, pp. 88-103.
16. Holland, J. H., 1992, "Adaptation in Natural and Artificial Systems" MIT Press, Cambridge, MA.
17. Ingbar, L., 1993, "Adaptive Simulated Annealing (ASA)", Lester Ingbar Research, Mclean, VA.
18. Jameson, A., 1999, "Re-Engineering the Design Process Through Computation", Journal of Aircraft, Vol. 36, No. 1, pp. 36-50.
19. KOller, U., MSnig, R., Ktlsters, B., Sehreiber, H-A., 1999, "Development of Advanced Compressor Airfoils for Heavy-Duty Gas Turbines, Part I: Design and Optimization", ASME 99-GT-95.
20. Moore, J.G., 1985, "Calculation of 3D Flow without Numerical Mixing", 3GARD-LS-140 on '3D Computation Techniques Applied to internal Flows in Propulsion Systems', pp 8.1-8.15.
21. Mueller-Toews, J. and Lawerenz, M., 1999, "2 Throughflow Optimization of Multistage Axial Compressors Using Deterministic And Stochastic Methods", ISABE 99-34048, proceedings of 14 th International Symposium on Airbreathing Engines, Florence, Italy.
22. Northall, J.D., Moore, J.G. and Moore, J., 1987, "Three-Dimensional Viscous Flow Calculations for Loss Prediction in Turbine Blade Rows", Paper no C267/87, IMechE Conference.
23. Petrovic, M.V., Dulikravich, G.S. and Martin, T.J., 1999, "Maximizing Multistage Turbine Efficiency by Optimizing Hub and Shroud Shapes and Inlet and Exit Conditions of Each Blade Row", ASME 99-GT-71.
24. Pierret, S. and Van den Braembussehe, R.A., 1998, "Turbomaehinery Blade Design Using A Navier-Stokes Solver And Artificial Neural Network", ASME 98-GT-4.
25. Pierret, S., 1999, "Three-dimensional Blade Design by Means of an Artificial Neural Network and Navier-Stokes solver", Von Karman Institute Lecture Series on "Turbomachinery Blade Design Systems".
26. Rai, M.M. and Madavan, N.K., 1998, "Aerodynamic Design using Neural Networks", AIAA-98-4928.
27. Reuther, J.J., Janeson, A., Alonso, J.J., Rimlinger, M.J. Saunders, D., 1999, "Constrained Multipoint Aerodynamic Shape Optimization Using an Adjoint Formulation and Parallel Computers, Part 1 and Part 2", Journal ofAircratt, Vol. 36, No. 1, pp. 51-74.
28. Shahpar, S. and Lapworth, B.L., 1998, "A Forward and Inverse Three-Dimensional Linear Design System for Turbomachinery Applications", 4th ECCOMAS Computational Fluid Dynamics Conference, Athens, Greece.
29. Shahpar, S., Lapworth, L., Depablos, T., and Taylor, M., 1999a, "A Linear Approach to the Multi-Parameter Design of Three-Dimensional Turbomachinery Blades", AIAA 99-0363, 37 th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV.
30. Shahpar, S. and Radford, D., 1999b, "Application of the FAITH Linear Design System to a Compressor Blade", ISABE 99-7045, 14 th International Symposium on Airbreathing Engines, Florence, Italy.
31. Takeishi, K., Matsuura, M., Aoki, S. and Sato, T., 1989, "An Experimental Study of heat transfer and Film Cooling on Low Aspect Ratio Turbine Nozzles", ASME paper 89-GT-187.
32. Tiow, W.T., and Zangeneh, M., 1998, "A Viscous Transonic Inverse Design Method For Turbomachinery Blades, Part I: 2D Cascades", ASME 98-GT-125.
33. Wang, Z., Cai, R., Chen, H., Zhang, D., 1998, "A Fully Threedimensional Inverse Method for Turbomachinery Blading with Navier-Stokes Equations", ASME 98-GT-126.
34. Watanabe, h., and Harada, H., 1999, "Suppression of Secondary Flows in a Turbine Nozzle with Controlled Stacking Shape and Exit Circulation by 3D Inverse Design Method", ASME 99-GT-72
35. Zangeneh, M., "A Compressible Three-Dimensional Design Method for Radial and Mixed Flow Turbomachinery Blades", Int. J. Numerical Methods in Fluids, Vot. 13, pp. 599-624.