Analysis and simulation of radial chatter in drilling and reaming

Proceedings of the ASME Design Engineering Technical Conference

Volumn 7B-1999, Issue , 1999, Pages 1711-1719

  Metzler, Sandra A ^a   Bayly, Philip V ^a   Young, Keith A ^b   Halley, Jeremiah E ^b  

^a Washington University   (United States)

^b BOEING COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BORING; CUTTING TOOLS; DEGREES OF FREEDOM (MECHANICS); INFILL DRILLING; MILLING (MACHINING); REAMING; STABILITY; VIBRATIONS (MECHANICAL);

ANALYSIS AND SIMULATION; ANALYTICAL PREDICTIONS; AXIAL MOTIONS; DYNAMIC STIFFNESS; FORWARD-AND-BACKWARD; SELF - EXCITED; STABILITY BOUNDARIES; TWO DEGREES OF FREEDOM;

TIME DOMAIN ANALYSIS;

EID: 84952972177     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC99-VIB-8059     Document Type: Conference Paper

References (33)

1. Altintas, Y. and Budak, E., "Analytical prediction of stability lobes in milling," Annals of the CIRP, Vol. 44, No. 1, pp. 357-362, 1995.
2. Armarego, E.J. and J.D. Wright, "Predictive models for drilling thrust and torque - a comparison of three flank configurations," Annals of the CIRP 33:5-10, 1984.
3. Armarego, E.J. and Z.J. Gong, "Four plane facet point drills - Basic design and cutting model predictions," Annals of the CIRP 39:41-45, 1990.
4. Bayly, P.V., K.A. Young, J.E. Halley, "Analysis of tool oscillation and hole roundness error in a quasi-static model of reaming," in review, ASME Journal ofManufacturing Science andEngineering, 1998.
5. Ema, S. and E. Marui, "Suppression of chatter vibration in drilling," Journal of Manufacturing Science and Engineering 120:200-202, 1998.
6. Friedman, M.Y., and I. Kitamura and S.M. Wu, "Rounding mechanism of reaming," CIRP 23(l):27-28, 1974.
7. Fujii, H., E. Marui, and S. Ema, "Whirling vibration in drilling. Part I: Cause of vibration and role of chisel edge," Journal of Engineering for Industry, 108:157-162, 1986.
8. Fujii, H., E. Marui, and S. Ema, "Whirling vibration in drilling. Part II: Influence of drill geometries, particularly of the drill flank, on the initiation of vibration," Journal of Engineering for Industry, 108:163-168, 1986b.
9. Fujii, H., E. Marui, and S. Ema, "Whirling vibration in drilling. Part III: Vibration analysis in drilling workpiece with pilot hole," Journal ofEngineering for Industry, 110:315-321, 1988.
10. Koenigsberger, F. and J. Tlusty, 1970, Structures of Machine Tools, Pergamon Press, Oxford.
11. Li, C-J., A.G. Ulsoy, and W.J. Endres, "The effect of tool rotation on regenerative chatter in line boring," in R.P.S. Han, K.H. Lee and A.C.J. Luo, Eds., Dynamics, Acoustics and Simulations, ASME Publication DE-Vol. 98, 235-243, 1998.
12. Makhecha, A., A.R. Thangeraj, and J.W. Sutherland, "Prediction of drilling thrust and torque using a mechanistic model calibrated through nonlinear optimization," ASME Paper PED-Vol.68-1, Manufacturing Science and Engineering, 1: 237-244, 1994.
13. Minis, I. and Yanushevsky, R., 1993, "A new theoretical approach for the prediction of machine tool chatter in milling" Journal of Engineering for Industry, Vol. 115, pp. 1-8.
14. Nayfeh, A. H., Chin, C.-M. and Pratt, J., 1997, "Perturbation methods in nonlinear dynamics - applications to machining dynamics," Journal of Manufacturing Science and Engineering, Vol. 119, No. 4(A), pp. 485-493.
15. Oxford Jr., C.J., "On the drilling of metals I - Basic mechanics of the process," Transactions of the ASME 77:103-114, 1955.
16. Rincon, D.M. and A.G. Ulsoy, "Effects of drill vibrations on cutting forces and torques," Annals ofthe CIRP 43:59-62, 1994.
17. Rincon, D.M. and A.G. Ulsoy, "Complex geometry, rotary inertia and gyroscopic moment effects on drill vibrations," Journal of Sound and Vibration 188:701-715, 1995.
18. Sakuma, K. and H. Kiyota, "Hole accuracy with carbide-tipped reamers: 1st report", Bulletin of the Japan Society of Precision Engineering, 19, 89-95, (1986).
19. Sakuma, K. and H. Kiyota, "Hole accuracy with carbide-tipped reamers: 2nd report", Bulletin of the Japan Society of Precision Engineering, 20, 103-108, (1986).
20. Shaw, M.C. and C.J. Oxford Jr., "On the drilling of metals II - The torque and thrust in drilling," Transactions of the ASME 79:139-148, 1957.
21. Smith, S. and J. Tlusty, "An overview of the modeling and simulation of the milling process," Journal of Engineering for Industry 113:169-175, 1991.
22. Stepan, G. and T. Kalmar-Nagy, "Nonlinear regenerative machine tool vibrations," Proc. 1997 ASME Design Engineering Technical Conference, Sacramento, 1997.
23. Stephenson, D.A. and J.S. Agapiou, "Calculation of main cutting edge forces and torque for drills with arbitrary point geometries," International Journal of Machine Tools and Manufacturing 32(4):521-538, 1992.
24. Stephenson, D.A. and S.M. Wu, "Computer models for the mechanics of three-dimensional cutting processes - Part II: Results for oblique end turning and drilling," Journal of Engineering for Industry 110:38-43, 1988.
25. Tanig, Y.S. and T.C. Li, "Detection and suppression of drilling chatter," Journal of Dynamic Systems Measurement and Control 116:729-734, 1994.
26. Tarng, Y.S. and T.C. Li, "Adaptive recognition of drilling chatter," Journal of Materials Processing Technology 48:247-253, 1995.
27. Tekinalp, O. and A.G. Ulsoy, "Effects of geometric and process parameters on drill transverse vibrations," ASME Journal of Engineering in Industry 112:189-194, 1990.
28. Tekinalp, O. and A.G. Ulsoy, "Modeling and finite element analysis of drill bit vibrations," ASME Journal of Engineering in Industry 111:148-155, 1989.
29. Tlusty, J., 1985, "Machine Dynamics", in Handbook of High-Speed Machining Technology, R.I. King Editor, Chapman and Hall, New York.
30. Tobias, S.A, 1965, Machine Tool Vibration, Wiley, New York.
31. Williams, R.A., "A study of the drilling process," Journal of Engineering for Industry 96:1207-1215, 1974.
32. Young, K.A., PV. Bayly and J.E. Halley, "Dynamic simulation of reaming: theory, methods, and application to the problem of lobed holes," in R.P.S. Han, K.H. Lee and A.C.J. Luo, Eds., Dynamics, Acoustics and Simulations, ASME Publication DE-Vol. 98, pp. 245-252, 1998.
33. Zhang, G.M. and S.G. Kapoor, "Dynamic modeling and analysis of the boring machining system," Journal of Engineering for Industry 109:219-226, 1987.