Nanostructured Fly Ash as Reinforcement in a Plastomer-Based Composite: A New Strategy in Value Addition to Thermal Power Station Fly Ash

Silicon

Volumn 8, Issue 1, 2016, Pages 159-173

  Patil, Akshata G ^a   Mahendran, Arunjunairaj ^b   Anandhan, S ^a  

^a NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA   (India)

^b KOMPETENZZENTRUM HOLZ GMBH   (Austria)

Author keywords

Composite; Fly ash; Interface; Mechanochemical activation; Wettability

Indexed keywords

BALL MILLING; CHEMICAL ACTIVATION; COMPOSITE MATERIALS; CRYSTALLITE SIZE; ETHYLENE; FILLED POLYMERS; FILLERS; FLY ASH; FOURIER TRANSFORM INFRARED SPECTROSCOPY; INTERFACES (MATERIALS); MILLING (MACHINING); REINFORCEMENT; SURFACE TREATMENT; THERMOELECTRIC POWER PLANTS; WETTING; X RAY DIFFRACTION;

ETHYLENE-OCTENE COPOLYMERS; FTIR SPECTROSCOPY; HIGH-ENERGY BALL MILLING; INTERFACIAL ADHESIONS; MECHANO-CHEMICAL ACTIVATION; MORPHOLOGICAL STUDY; REINFORCING FILLERS; THERMAL POWER STATIONS;

COAL ASH;

EID: 84952758982     PISSN: 1876990X     EISSN: 18769918     Source Type: Journal    
DOI: 10.1007/s12633-014-9194-2     Document Type: Article

References (47)

1. Senapati MR (2011) Fly ash from thermal power plants–waste management and overview. Curr Sci 100(12):1791–1794
2. Ahmaruzzaman M (2010) A review on the utilization of fly ash. Prog Energy Combust Sci 36(3):327–363
3. Bandyopadhyay S, Zaeni A, Nath D, Yu A, Zeng Q, Blackburn D, White C (2010) Advanced utilization of as received and near whitened fly ash in polypropylene polymer to improve mechanical, notched impact and whiteness color properties. Int J Plast Technol 14(1):51–56
4. Iyer R, Scott J (2001) Power station fly ash—a review of value-added utilization outside of the construction industry. Resour Conserv Recycl 31(3):217–228
5. Paul KT, Satpathy SK, Manna I, Chakraborty KK, Nando GB (2007) Preparation and characterization of nano structured materials from fly ash: a waste from thermal power stations, by high energy ball milling. Nanoscale Res Lett 2(8):397–404
6. Potgieter-Vermaak SS, Potgieter JH, Kruger RA, Spolnik Z, van Grieken R (2005) A characterisation of the surface properties of an ultra fine fly ash (UFFA) used in the polymer industry. Fuel 84(18):2295–2300
7. Parvaiz MR, Mohanty S, Nayak SK, Mahanwar PA (2011) Effect of surface modification of fly ash on the mechanical, thermal, electrical and morphological properties of polyetheretherketone composites. Mater Sci Eng A 528(13–14):4277–4286
8. Sengupta S, Pal K, Ray D, Mukhopadhyay A (2011) Furfuryl palmitate coated fly ash used as filler in recycled polypropylene matrix composites. Compos B Eng 42(7):1834–1839
9. Satapathy BK, Das A, Patnaik A (2011) Ductile-to-brittle transition in cenosphere-filled polypropylene composites. J Mater Sci 46(4):1963–1974
10. Kulkarni SM (2002) Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites. J Mater Sci 37(20):4321–4326
11. Nath DCD, Bandyopadhyay S, Boughton P, Yu A, Blackburn D, White C (2010) Chemically modified fly ash for fabricating super-strong biodegradable poly(vinyl alcohol) composite films. J Mater Sci 45(10):2625–2632
12. Deepthi MV, Sharma M, Sailaja RRN, Anantha P, Sampathkumaran P, Seetharamu S (2010) Mechanical and thermal characteristics of high density polyethylene–fly ash Cenospheres composites. Mater Des 31(4):2051–2060
13. Anandhan S, Sundar SM, Senthil T, Mahendran AR, Shibulal GS (2012) Extruded poly(ethylene-co-octene)/fly ash composites – value added products from an environmental pollutant. J Polym Res 19(3):1–11
14. Baláž P (2008) High-energy milling, in mechanochemistry in nanoscience and minerals engineering, chap 2. Springer-Verlag, Berlin, pp 103–132
15. Zhang FL, Zhu M, Wang CY (2008) Parameters optimization in the planetary ball milling of nanostructured tungsten carbide/cobalt powder. Refract Met Hard Mater 26(4):329–333
16. Patil AG, Anandhan S (2012) Ball milling of class-F indian fly ash obtained from a thermal power station. Int J Energy Eng 2(2):57–62
17. Paul KT, Pabi SK, Chakraborty KK, Nando GB (2009) Nanostructured fly ash–styrene butadiene rubber hybrid nanocomposites. Polym Compos 30(11):1647–1656
18. Satapathy S, Nag A, Nando GB (2012) Effect of electron beam irradiation on the mechanical, thermal, and dynamic mechanical properties of fly ash and nanostructured fly ash waste polyethylene hybrid composites. Polym Compos. doi: 10.1002/pc.22140
19. Satapathy S, Nando GB, Nag A, Raju KVSN (2013) HDPE-fly ash/nano fly ash composites. J App Polym Sci. doi: 10.1002/app.39733
20. Ma X, Lu H, Liang G, Yan H (2004) Rectorite/thermoplastic polyurethane nanocomposites: preparation, characterization, and properties. J Appl Polym Sci 93:608–614
21. ASTM D 854-10Standard test methods for Specific gravity of soil solids by water pycnometer. ASTM International; March 2010
22. ASTM D 638-10Standard test method for tensile properties of plastics. ASTM International; June 2010
23. ASTM D 412-06aStandard test methods for vulcanized rubber and thermoplastic elastomers—tension. ASTM International; April 2013
24. ASTM D 2863Standard test method for measuring the minimum oxygen concentration to support candle-like combustion of plastics (Oxygen Index). May 2012
25. Ashby M F, Ferreira P J, Schodek D L (2009) Nanomaterials, nanotechnologies and designs. Elsevier, Oxford
26. Nath DCD, Bandyopadhyay S, Gupta S, Yu A, Blackburn D, White C (2010) Surface-coated fly ash used as filler in biodegradable poly(vinyl alcohol) composite films: Part 1—The modification process. Appl Surf Sci 256(9):2759–2763
27. Nath DCD, Bandyopadhyay S, Yu A, Blackburn D, White C (2010) High strength bio-composite films of poly(vinyl alcohol) reinforced with chemically modified-fly ash. J Mater Sci 45(5):1354–1360
28. http://www.surface-tension.de/. Accessed 10 Aug 2013
29. Nalbantoğlu Z (2004) Effectiveness of Class C fly ash as an expansive soil stabilizer. Construct Build Mater 18(4):377–381
30. Mishra SR, Kumar S, Wagh A, Rho J Y, Gheyi T (2003) Temperature-dependent surface topography analysis of Illinois class F fly ash using ESEM and AFM. Mater Lett 57(16–17):2417–2424
31. Thongsang S, Sombatsompop N (2006) Effect of NaOH and Si69 treatments on the properties of fly ash/natural rubber composites. Polym Compos 27(1):30–40
32. Cullity BD, Stock SR (2001) Elements of X-ray diffraction, 3rd edn. Prentice-Hall, New Jersey
33. Yang Q, Zhao L, Xiao H, Zhao N (2000) Analysis of intrinsic stress in diamond films by X-ray diffraction. International centre for diffraction data. Adv X-ray Analy 43:151–156
34. Khan MJ, Al-Juhani AA, Shawabkeh R, Ul-Hamid A, Hussein IA (2011) Chemical modification of waste oil fly ash for improved mechanical and thermal properties of low density polyethylene composites. J Polym Res 18(4):2275–2284
35. Swami PN, Raju BN, Rao DV, Rao JB (2009) Synthesis and characterization of nano-structured fly ash: a waste from thermal power plant. Proceedings of the institution of mechanical engineers. Part N: J Nanoengineer and Nanosys 223(2):35–44
36. Nath DCD, Bandyopadhyay S, Yu A, Zeng Q, Das T, Blackburn D, White C (2009) Structure–property interface correlation of fly ash–isotactic polypropylene composites. J Mater Sci 44(22):6078–6089
37. Friel JJ, Grande JC, Hetzner D, Kurzydlowski K, Laferty D, Shehata MT, Smolej V, Voort GFV, Wojnar LA (2000) Practical guide to image analysis, ASM International, Materials Park, Ohio, USA
38. Viana RB, da Silva ABF, Pimentel AS (2012) Infrared spectroscopy of anionic, cationic, and zwitterionic surfactants. Adv Phy Chem. doi: 10.1155/2012/903272
39. Latta G, Lineberry Q, Ozao R, Zhao H-Y, Pan W-P (2008) Thermal properties of ethylene octene copolymer (Engage)/dimethyldioctadecyl quaternary ammonium chloride-modified montmorillonite clay nanocomposites. J Mater Sci 43(8):2555–2561
40. Smith B (1999) Infrared spectral Interpretation. Library of congress-in-publication data
41. Guhanathan S, Devi MS, Murugesan V (2001) Effect of coupling agents on the mechanical properties of fly ash/polyester particulate composites. J Appl Polym Sci 82(7):1755–1760
42. Nielsen LE (1966) Simple theory of stress-strain properties of filled polymers. J App Polym Sci 10(1):97–103
43. Nelson MI (2001) A dynamical systems model of the limiting oxygen index test: II. Retardancy due to char formation and addition of inert fillers. Combust Theor Model 5(1):59–83
44. Búcsi A, Rychlý J (1992) A theoretical approach to understanding the connection between ignitability and flammability parameters of organic polymers. Polym Degrad and Stab 38(1):33–40
45. Shi XM, Zhang J, Jin J, Chen SJ (2008) Non-isothermal crystallization and melting of ethylene-vinyl acetate copolymers with different vinyl acetate contents, eXPRESS. Polym Lett 2:623–629
46. Liu M, Guo B, Du M, Chen F, Jia D (2009) Halloysite nanotubes as a novel β-nucleating agent for isotactic polypropylene. Polymer 50(13):3022–3030
47. Shangguan Y, Song Y, Peng M, Li B, Zheng Q (2005) Formation of β-crystal from nonisothermal crystallization of compression-molded isotactic polypropylene melt. Eur Polym J 41(8):1766–1771