Characterization of bio-filler derived from seashell wastes and its effect on the mechanical, thermal, and flame retardant properties of ABS composites

Polymer Composites

Volumn 38, Issue 12, 2017, Pages 2788-2797

  Moustafa, Hesham ^a   Youssef, Ahmed M ^b   Duquesne, Sophie ^c   Darwish, Nabila A ^a  

^a National Institute for Standards   (Egypt)

^b NATIONAL RESEARCH CENTRE   (Egypt)

^c Ecole Nationale Superieure de Chimie de Lille   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ABS RESINS; CALCIUM; CALCIUM CARBONATE; CARBONATION; DIGITAL STORAGE; DYNAMIC MECHANICAL ANALYSIS; FLAME RETARDANTS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GLASS TRANSITION; HEAT TRANSFER; SCANNING ELECTRON MICROSCOPY; STYRENE; TENSILE STRENGTH; THERMOGRAVIMETRIC ANALYSIS; WASTE INCINERATION; X RAY DIFFRACTION;

ACRYLONITRILE-BUTADIENE-STYRENE COPOLYMERS; CALORIMETRIC TEST; DYNAMIC MECHANICAL ANALYSIS (DMA); FLAME RETARDANT PROPERTIES; FOURIER TRANSFORM INFRA RED (FTIR) SPECTROSCOPY; HEAT RELEASE RATE (HRR); POLYMER FRAGMENTS; X RAY FLUORESCENCE;

FILLERS;

EID: 84950000182     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.23878     Document Type: Article

References (49)

1. V. Fombuena, L. Bernardi, O. Fenollar, T. Boronat, and R. Balart, Mater. Design, 57, 168 (2014).
2. R. Doufnoune, F. Chebira, and N. Haddaoui, Int. J. Polym. Mater., 52, 967 (2003).
3. F. Marin and G. Luquet, Mater. Sci. Eng. C, 25, 105 (2005).
4. M.A. Meyers, A.Y.M. Lin, P.Y. Chen, and J. Muyco, J. Mech. Behav. Biomed., 1, 76 (2008).
5. H.-Y. Li, Y.-Q. Tan, L. Zhang, Y.-X. Zhang, Y.-H. Song, Y. Ye, and M.-S. Xia, J. Hazard. Mater., 217, 256 (2012).
6. Z.T. Yao, T. Chen, H.Y. Li, M.S. Xia, Y. Ye, and H. Zheng., J. Hazard. Mater., 262, 212 (2013).
7. Z. Yao, M. Xia, H. Li, T. Chen, Y. Ye, and H. Zheng., Crit. Rev. Environ. Sci. Technol., 44, 2502 (2013).
8. S.-H. Jung, S.-J. Kim, and J.-S. Kim, Fuel Process. Technol., 96, 265 (2012).
9. L. Xiang, Y. Xiang, Y. Wen, and F. Wei, Mater. Lett., 58, 959 (2004).
10. S.F. Wang, Y. Hu, L. Song, Z.Z. Wang, Z.Y. Chen, and W.C. Fan, Polym. Degrad. Stab., 77, 423 (2002).
11. H.-Q. Yin, D. Yuan, and X.-F. Cai, Polym. Degrad. Stab., 98, 288 (2013).
12. M. Brebu, T. Bhaskai, K. Murai, A. Muto, Y. Sakata, and M.A. Uddin, Chemosphere, 56, 433 (2004).
13. R.C. Xie and B.J. Qu, J. Appl. Polym. Sci., 80, 1181 (2001).
14. B. Li and M.J. Xu, Polym. Degrad. Stab., 91, 1380 (2006).
15. N. Hong, J. Zhan, X. Wang, A.A. Stec, T.R. Hull, H. Ge, W. Xing, L. Song, and Y. Hu., Compos. Part A, 64, 203 (2014).
16. I. Zaman, H.C. Kuan, J.F. Dai, N. Kawashima, A. Michelmore, A. Sovi, S. Dong, L. Luong, and J. Ma, Nanoscale, 4, 4578 (2012).
17. K.W. Putz, O.C. Compton, M.J. Palmeri, S.T. Nguyen, and L.C. Brinson, Adv. Funct. Mater., 20, 3322 (2010).
18. Y. Lin, J. Jin, and M. Song, J. Mater. Chem., 21, 3455 (2011).
19. Y.W. Cao, Z.L. Lai, J.C. Feng, and P.Y. Wu, J. Mater. Chem., 21, 9271 (2011).
20. N.N. Hong, Y. Pan, J. Zhan, B.B. Wang, K.Q. Zhou, L. Song, and Y. Hu, RSC Adv., 3, 16440 (2013).
21. H. Lu and C.A. Wilkie, Polym. Adv. Technol., 17, 764 (2010).
22. M. Mustakimah, S. Yusup, and S. Maitra, J. Eng. Sci. Technol., 7, 1 (2012).
23. M.C. Barros, P.M. Bello, M. Bao, and J.J. Torrado, J. Clean. Prod., 17, 400 (2009).
24. N. Nakatani, H. Takamori, K. Takeda, and H. Sakugawa, Bioresour. Technol., 100, 1510 (2009).
25. H.P. Lu, G. Smirniotis, F.O. Ernst, and S.E. Pratsinis, Chem. Eng. Sci., 64, 1936 (2009).
26. M.R.R. Hamester, P.S. Balzer, and D. Becker., Mater. Res., 15, 204 (2012).
27. H.-Y. Li, Y.-Q. Tanb, L. Zhang, Y.-X. Zhang, Y.-H. Song, Y. Ye, and M.-S. Xia, J. Hazard. Mater., 217–218, 256 (2012).
28. M.A. Legod, D. de Waal, J.H. Potgieter, and S.S. Potgieter, Miner. Eng., 14, 1107 (2001).
29. K. Naemchanthara, S. Meejoo, W. Onreabroy, and P. Limsuwan, Adv. Mater. Res., 55, 333 (2008).
30. N.V. Vagenas, A. Gatsouli, and C.G. Kontoyannis, Talanta, 59, 831 (2003).
31. B. Engin, H. Demirtas, and M. Eken, Radiat. Phys. Chem., 75, 268 (2006).
32. Y. Gil-Lim, K. Byung-Tak, K. Baeck-Oon, and H. Sang-Hun, Waste Manage., 23, 825 (2003).
33. X. Gao, B. Zhou, Y. Guo, Y. Zhu, X. Chen, Y. Zheng, W. Gao, X. Ma, and Z. Wang, Colloid Surf. A, 371, 1 (2010).
34. T. Murayama, Dynamic Mechanical Analysis of Polymer Material, Elsevier, New York (1978).
35. H. Ma, Z. Xu, L. Tong, A. Gu, and Z. Fang, Polym. Degrad. Stab., 91, 2951 (2006).
36. H. Miyagawa, A.K. Mohanty, L.T. Drzal, and M. Misra, Nanotechnology, 16, 118 (2005).
37. C.Y. Tang, L.C. Chan, L.Z. Liang, K.W.E. Cheng, and T.L. Wong, J. Reinf. Plast. Compos., 21, 1337 (2002).
38. S.-Y. Fu and B. Lauke, Compos. Part A, 29A, 575 (1998).
39. Y. Gao, L. Liu, and Z. Zhang, Acta Mech. Solida Sin., 22, 555 (2009).
40. F. Ren, X. Wan, Z. Ma, and J. Su, Mater. Chem. Phys., 114, 367 (2007).
41. P.Y. Chen, A. Lin, Y.S. Lin, Y. Seki, A. Stokes, J. Peyras, E. Olevsky, M. Meyers, and J. McKittrick, J. Mech. Behav. Biomed., 1, 208 (2008).
42. H. Vandersall, J. Fire Flammabil., 21, 97 971).
43. A.P. Mouritz, Z. Mathys, and A.G. Gibson, Compos. Part A, 37, 1040 (2006).
44. D. Wang, Y. Liu, Y. Wang, C.P. Artiles, T.R. Hull, and D. Price, Polym. Degrad. Stab., 92, 1592 (2007).
45. J. Zhu, F.M. Uhl, A.B. Morgan, and C.A. Wilkie., Chem. Mater., 13, 4649 (2001).
46. S. Rujitanapanicha, P. Kumpapanb, and P. Wanjanoi, Energy Procedia, 56, 112 (2014).
47. B. Yu, Y. Shi, B. Yuan, S. Qiu, W. Xing, W. Hu, L. Song, S. Loc, and Y. Hu, J. Mater. Chem. A, 3, 8034 (2015).
48. Y. Zhang, X. Li, Z. Cao, Z. Fang, T.R. Hull, and A.A. Stec, Ind. Eng. Chem. Res., 54, 3247 (2015).
49. C. Feng, M. Liang, W. Chen, J. Huang, and H. Liu, J. Anal. Appl. Pyrol, (2015). DOI:10.1016/j.jaap.2015.01.021.