Reaction temperature sensing (RTS)-based control for Li-ion battery safety

Scientific Reports

Volumn 5, Issue , 2015, Pages

  Zhang, Guangsheng ^a   Cao, Lei ^a   Ge, Shanhai ^a   Wang, Chao Yang ^a,b   Shaffer, Christian E ^b   Rahn, Christopher D ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b EC Power   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ION; LITHIUM;

CHEMISTRY; POWER SUPPLY; SAFETY; TEMPERATURE;

ELECTRIC POWER SUPPLIES; IONS; LITHIUM; SAFETY; TEMPERATURE;

EID: 84949604827     PISSN: None     EISSN: 20452322     Source Type: Journal    
DOI: 10.1038/srep18237     Document Type: Article

References (35)

1. Armand, M. & Tarascon, J. M. Building better batteries. Nature 451, 652-657, doi: 10.1038/451652a (2008).
2. Whittingham, M. S. Lithium batteries and cathode materials. Chem. Rev. 104, 4271-4301, doi: 10.1021/cr020731c (2004).
3. Doughty, D. & Roth, E. P. A general discussion of Li ion battery safety. ECS Interface Summer, 37-44 (2012) Available at: http://www. electrochem.org/dl/interface/sum/sum12/sum12-p037-044.pdf (Accessed: 23rd December 2014).
4. Goodenough, J. B. & Park, K.-S. The Li-ion rechargeable battery: a perspective. J. Am. Chem. Soc. 135, 1167-1176, doi: 10.1021/ja3091438 (2013).
5. Rahn, C. D. & Wang, C. Y. Battery management systems in Battery systems engineering, Ch.8, 224-228, doi: 10.1002/9781118517048. ch8 (John Wiley & Sons Ltd, 2013).
6. Smith, B. Chevrolet Volt battery incident overview report. Technical Report DOT HS 811 573 (2012) Available at: http://www-odi. nhtsa.dot.gov/acms/cs/jaxrs/download/doc/UCM399393/INRP-PE11037-49880.pdf (Accessed: 23rd December 2014).
7. National Transportation Safety Board (NTSB). Auxiliary power unit battery fire Japan Airlines Boeing 787-8, JA829J, Boston, Massachusetts, January 7, 2013, Aircraft Incident Report NTSB/AIR-14/01 PB2014-108867 (2014) Available at: http://www.ntsb.gov/investigations/AccidentReports/Reports/AIR1401.pdf (Accessed: 15th May 2015).
8. Mikolajczak, C., Kahn, M., White, K. & Long, R. T. Lithium-ion battery failures in Lithium-ion batteries hazard and use assessment, Ch. 4, 43-70, doi: 10.1007/978-1-4614-3486-3-4 (Springer-Verlag, 2011).
9. Doughty, D. H. & Pesaran, A. A. Vehicle battery safety roadmap guidance, Subcontract Report NREL/SR-5400-54404 (2012) Available at: http://www.nrel.gov/docs/fy13osti/54404.pdf (Accessed: 23rd December 2014).
10. Wu, H., Zhuo, D., Kong, D. & Cui, Y. Improving battery safety by early detection of internal shorting with a bifunctional separator. Nat. Commun. 5, 5193, doi: 10.1038/ncomms6193 (2014).
11. Santhanagopalan, S., Ramadass, P. & Zhang, J. Analysis of internal short-circuit in a lithium ion cell. J. Power Sources 194, 550-557, doi: 10.1016/j.jpowsour.2009.05.002 (2009).
12. Maleki, H. & Howard, J. N. Internal short circuit in Li-ion cells. J. Power Sources 191, 568-574, doi: 10.1016/j.jpowsour.2009.02.070 (2009).
13. Cai, W., Wang, H., Maleki, H., Howard, J. & Lara-Curzio, E. Experimental simulation of internal short circuit in Li-ion and Li-ionpolymer cells. J. Power Sources 196, 7779-7783, doi: 10.1016/j.jpowsour.2011.04.024 (2011).
14. Fang, W., Ramadass, P. & Zhang, Z. Study of internal short in a Li-ion cell-II. Numerical investigation using a 3D electrochemicalthermal model. J. Power Sources 248, 1090-1098, doi: 10.1016/j.jpowsour.2013.10.004 (2014).
15. Zhao, W., Luo, G. & Wang, C. Y. Modeling nail penetration process in large-format li-ion cells. J. Electrochem. Soc. 162, A207-A217, doi: 10.1149/2.1071501jes (2015).
16. Leising, R. A., Palazzo, M. J., Takeuchi, E. S. & Takeuchi, K. J. Abuse testing of lithium-ion batteries -Characterization of the overcharge reaction of LiCoO2/graphite cells. J. Electrochem. Soc. 148, A838-A844, doi: 10.1149/1.1379740 (2001).
17. Leising, R. A., Palazzo, M. J., Takeuchi, E. S. & Takeuchi, K. J. A study of the overcharge reaction of lithium-ion batteries. J. Power Sources 97-98, 681-683, doi: 10.1016/S0378-7753(01)00598-5 (2001).
18. Zeng, Y., Wu, K., Wang, D., Wang, Z. & Chen, L. Overcharge investigation of lithium-ion polymer batteries. J. Power Sources 160, 1302-1307, doi: 10.1016/j.jpowsour.2006.02.009 (2006).
19. Forgez, C., Vinh, Do, D., Friedrich, G., Morcrette, M. & Delacourt, C. Thermal modeling of a cylindrical LiFePO4/graphite lithiumion battery. J. Power Sources 195, 2961-2968, doi: 10.1016/j.jpowsour.2009.10.105 (2010).
20. Li, Z. et al. Examining temporal and spatial variations of internal temperature in large-format laminated battery with embedded thermocouples. J. Power Sources 241, 536-553, doi: 10.1016/j.jpowsour.2013.04.117 (2013).
21. Zhang, G. S. et al. In situ measurement of radial temperature distributions in cylindrical li-ion cells. J. Electrochem. Soc. 161, A1499-A1507, doi: 10.1149/2.0051410jes (2014).
22. Rezvanizaniani, S. M., Liu, Z., Chen, Y. & Lee, J. Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility. J. Power Sources, 256, 110-124, doi: 10.1016/j.jpowsour.2014.01.085 (2014).
23. Barnett, B., Ofer, D., Sriramulu, S. & Stringfellow, R. Lithium-ion batteries, safety in Batteries for sustainability: selected entries from the encyclopedia of sustainability science and technology (ed. R. J. Brodd) Ch. 9, 285-318, doi: 10.1007/978-1-4614-5791-6-9 (Springer, 2013).
24. McCoy, C., Sriramulu, S., Stringfellow, R., Ofer, D. & Barnett, B. Lithium-ion battery safety: detection of developing internal shorts and suppression of thermal runaway. 46th Power Sources Conference, Orlando, Florida, (June 9-12, 2014). Available at, http://www. camxpower.com/wp-content/uploads/4-6.pdf (Accessed: 15th May 2015)
25. Srinivasan, R. Monitoring dynamic thermal behavior of the carbon anode in a lithium-ion cell using a four-probe technique. J. Power Sources 198, 351-358, doi: 10.1016/j.jpowsour.2011.09.077 (2012).
26. Schmidt, J. P. et al. Measurement of the internal cell temperature via impedance: Evaluation and application of a new method. J. Power Sources 243, 110-117, doi: 10.1016/j.jpowsour.2013.06.013 (2013).
27. Sahraei, E., Campbell, J. & Wierzbicki, T. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions. J. Power Sources 220, 360-372, doi: 10.1016/j.jpowsour.2012.07.057 (2012).
28. Wenger, M., Waller, R., Lorentz, V. R. H., Marz, M. & Herold M. Investigation of gas sensing in large lithium-ion battery systems for early fault detection and safety improvement. Industrial Electronics Society, IECON 2014 -40th Annual Conference of the IEEE, Dallas, TX, 5654-5659, doi: 10.1109/IECON.2014.7049366 (October 29 -November 1, 2014).
29. Campion, C. L., Li, W. & Lucht, B. L. Thermal decomposition of LiPF6-based electrolytes for lithium-ion batteries. J. Electrochem. Soc. 152, A2327-A2334, doi: 10.1149/1.2083267 (2005).
30. Hammami, A., Raymond, N. & Armand, M. Lithium-ion batteries: Runaway risk of forming toxic compounds. Nature 424, 635-636, doi: 10.1038/424635b (2003).
31. Arora, P. & Zhang, Z. Battery Separators. Chem. Rev. 104, 4419-4462, doi: 10.1021/cr020738u (2004).
32. Roth, E. P., Doughty, D. H. & Pile, D. L. Effects of separator breakdown on abuse response of 18650 Li-ion cells. J. Power Sources 174, 579-583, doi: 10.1016/j.jpowsour.2007.06.163 (2007).
33. Zu, C. X. & Li, H. Thermodynamic analysis on energy densities of batteries. Energy Environ. Sci. 4, 2614-2624, doi: 10.1039/C0EE00777C (2011).
34. Bruce, P. G., Freunberger, S. A., Hardwick, L. J. & Tarascon, J.-M. Li-O2 and Li-S batteries with high energy storage. Nat. Mater. 11, 19-29, doi: 10.1038/nmat3191 (2012).
35. Tagawa, K. & Brodd, R. J. Production processes for fabrication of lithium-ion batteries, lithium-ion batteries (eds Masaki, Yoshio, Ralph J, Brodd & Akiya, Kozawa) Ch. 8, 181-194, doi: 10.1007/978-0-387-34445-4-8 (Springer, 2009).