The cardston earthquake swarm and hydraulic fracturing of the exshaw formation (Alberta bakken play)

Bulletin of the Seismological Society of America

Volumn 105, Issue 6, 2015, Pages 2871-2884

  Schultz, Ryan ^a   Mei, Shilong ^a   Pană, Dinu ^a   Stern, Virginia ^a   Gu, Yu Jeffrey ^b   Kim, Ahyi ^c   Eato, David ^d  

^a ALBERTA GEOLOGICAL SURVEY   (Canada)

^b UNIVERSITY OF ALBERTA   (Canada)

^c YOKOHAMA CITY UNIVERSITY   (Japan)

^d UNIVERSITY OF CALGARY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDINGS; CRYSTALLINE MATERIALS; FAULTING; GEOPHYSICS; HORIZONTAL WELLS; HYDRAULIC FRACTURING;

CRYSTALLINE BASEMENT; DOUBLE DIFFERENCES; EARTHQUAKE SWARMS; EXTENSIONAL FAULTS; HYDRAULIC COMMUNICATION; MOMENT TENSOR INVERSION; SOURCE MECHANISMS; STRUCTURAL INTERPRETATION;

EARTHQUAKES;

DEVONIAN; EARTHQUAKE MAGNITUDE; EARTHQUAKE SWARM; HYDRAULIC FRACTURE; MOMENT TENSOR; SEISMOLOGY; WAVEFORM ANALYSIS;

ALBERTA; CANADA;

EID: 84949292984     PISSN: 00371106     EISSN: 19433573     Source Type: Journal    
DOI: 10.1785/0120150131     Document Type: Article

References (91)

1. Aki, K. (1965). Maximum likelihood estimate of b in the formula log(N)= a − bM and its confidence limits, Bull. Earthq. Res. Inst. Tokyo Univ. 43, 237–239.
2. Baisch, S., L. Ceranna, and H. Harjes (2008). Earthquake cluster: What can we learn from waveform similarity? Bull. Seismol. Soc. Am. 98, 2806–2814, doi: 10.1785/0120080018.
3. BC Oil and Gas Commission (2012). Investigation of observed seismicity in the Horn River basin, 29 pp., http://www.bcogc.ca/document.aspx? documentID=1270 (last accessed September 2014).
4. BC Oil and Gas Commission (2014). Investigation of observed seismicity in the Montney trend, 32 pp., http://www.bcogc.ca/sites/default/files/documentation/technical-reports/investigation-observed-seismicitymontney-trend. pdf (last accessed June 2015).
5. Beaumont, C., G. M. Quinlan, and G. S. Stockmal (1993). The evolution of the Western Interior basin: Causes, consequences and unsolved problems, Spec. Pap. Geol. Assoc. Canada 39, 91–117.
6. Bell, J. S., and S. E. Grasby (2012). The stress regime of the Western Canadian sedimentary basin, Geofluids 12, no. 2, 150–165, doi: 10.1111/j.1468-8123.2011.00349.x.
7. Célérier, B. (1988). How much does slip on a reactivated fault plane constrain the stress tensor? Tectonics 7, no. 6, 1257–1278, doi: 10.1029/TC007i006p01257.
8. Chen, Y., Y. J. Gu, R. M. H. Dohkt, and M. D. Sacchi (2015). Crustal imprints of Precambrian orogenesis in western Laurentia, J. Geophys. Res. 120, doi: 10.1002/2014JB011353.
9. Chen, Z., S. E. Grasby, and K. G. Osadetz (2011). Geological controls on regional transmissivity anisotropy, Geofluids 11, no. 2, 228–241, doi: 10.1111/j.1468-8123.2011.00334.x.
10. Clarke, H., L. Eisner, P. Styles, and P. Turner (2014). Felt seismicity associated with shale gas hydraulic fracturing: The first documented example in Europe, Geophys. Res. Lett. 41, 8308–8314, doi: 10.1002/2014GL062047.
11. D’Alessandro, A., and M. Stickney (2012). Montana seismic network performance: An evaluation through the SNES method, Bull. Seismol. Soc. Am. 102, no. 1, 73–87, doi: 10.1785/0120100234.
12. Davies, R., G. Foulger, A. Bindley, and P. Styles (2013). Induced seismicity and hydraulic fracturing for the recovery of hydrocarbons, Mar. Petrol. Geol. 45, 171–185, doi: 10.1016/j.marpetgeo.2013.03.016.
13. Davies, R. J., S. A. Mathias, J. Moss, S. Hustoft, and L. Newport (2012). Hydraulic fractures: How far can they go? Mar. Petrol. Geol. 37, no. 1, 1–6, doi: 10.1016/j.marpetgeo.2012.04.001.
14. Davis, S. D., and C. Frohlich (1993). Did (or will) fluid injection cause earthquakes? Criteria for a rational assessment, Seismol. Res. Lett. 64, 207–224.
15. Downie, R., E. Kronenberger, and S. C. Maxwell (2010). Using microseismic source parameters to evaluate the influence of faults on fracture treatments: A geophysical approach to interpretation, SPE Annual Technical Conference and Exhibition, Florence, Italy, 19–22 September, Society of Petroleum Engineers, doi: 10.2118/134772-MS.
16. Dreger, D. S. (2003). TDMT_INV: Time Domain seismic Moment Tensor INVersion, in International Handbook of Earthquake Engineering Seismology, Vol. 81B, Academic Press, London, United Kingdom, 1627 pp.
17. Earthquakes Canada (2014). GSC, earthquake search (online bulletin), Nat. Res. Can., available at http://earthquakescanada.nrcan.gc.ca/stndon/ NEDB‑BNDS/bull‑eng.php (last accessed December 2014).
18. Eaton, D. (2014). Alberta Telemetered Seismograph Network (ATSN): Real-time monitoring of seismicity in northern Alberta, CSEG Recorder 39, no. 3, 30–33.
19. Eaton, D., and A. Babaie Mahani (2015). Focal mechanisms of some inferred induced earthquakes in Alberta, Canada, Seismol. Res. Lett. 86, 1078–1085, doi: 10.1785/0220150066.
20. Efron, B., and R. Tibshirani (1986). Bootstrap methods for standard errors, confidence intervals, and other measures of statistical accuracy, Stat. Sci. 54–75, doi: 10.1214/ss/1177013815.
21. Ellsworth, W. L. (2013). Injection-induced earthquakes, Science 341, 6142, doi: 10.1126/science.1225942.
22. Fischer, T., and A. Guest (2011). Shear and tensile earthquakes caused by fluid injection, Geophys. Res. Lett. 38, no. 5, doi: 10.1029/2010GL045447.
23. Friberg, P. A., G. M. Besana-Ostman, and I. Dricker (2014). Characterization of an earthquake sequence triggered by hydraulic fracturing in Harrison County, Ohio, Seismol. Res. Lett. 85, no. 2, 462, doi: 10.1785/0220140127.
24. Frohlich, C. (2001). Display and quantitative assessment of distributions of earthquake focal mechanisms, Geophys. J. Int. 144, no. 2, 300–308, doi: 10.1046/j.1365-246x.2001.00341.x.
25. Glombick, P, and A. J. Mumpy (2014). Subsurface stratigraphic picks for the Milk River “shoulder,” Alberta Plains: Including tops for the Milk River Formation and Alderson member of the Lea Park Formation; Alberta Energy Regulator, AER/AGS Open-File Rept. 2013-17, 23 pp.
26. Goertz-Allmann, B. P., and S. Wiemer (2012). Geomechanical modeling of induced seismicity source parameters and implications for seismic hazard assessment, Geophysics 78, no. 1, KS25–KS39, doi: 10.1190/geo2012-0102.1.
27. Gregory, K. B., R. D. Vidic, and D. A. Dzombak (2011). Water management challenges associated with the production of shale gas by hydraulic fracturing, Elements 7, no. 3, 181–186, doi: 10.2113/gselements.7.3.181.
28. Gu, Y. J., A. Okeler, L. Shen, and S. Contenti (2011). The Canadian Rockies and Alberta Network (CRANE): New constraints on the Rockies and western Canada sedimentary basin, Seismol. Res. Lett. 82, 575–588, doi: 10.1785/gssrl.82.4.575.
29. Hamilton, W. N., C. W. Langenberg, M. Price, and D. K. Chao (2012). Major bedrock faults of Alberta, GIS data (line features) shown on AGS Map 236, Energy Resources Conservation Board, ERCB/AGS Digital Data 2012-0016, http://www.ags.gov.ab.ca/publications/abstracts/DIG_2012_0016.html (last accessed January 2015).
30. Healy, J. T., W. W. Rubey, D. T. Griggs, and C. B. Raleigh (1968). The Denver earthquakes, Science 161, 1301–1310, doi: 10.1126/science.161.3848.1301.
31. Hiebert, S. N., and D. A. Spratt (1996). Geometry of the thrust front near Pincher Creek, Alberta, Bull. Can. Petrol. Geol. 44, no. 2, 195–201.
32. Hildebrand, R. S. (2013). Mesozoic assembly of the North American cordillera, Geol. Soc. Am. Spec. Pap. 495, 169 pp.
33. Holland, A. A. (2013). Earthquakes triggered by hydraulic fracturing in south-central Oklahoma, Bull. Seismol. Soc. Am. 103, 1784–1792, doi: 10.1785/0120120109.
34. Horner, R. B., J. E. Barclay, and J. M. MacRae (1994). Earthquakes and hydrocarbon production in the Fort St. John area of northeastern British Columbia, Can. J. Explor. Geophys. 30, no. 1, 39–50.
35. Hsieh, P. A., and J. D. Bredehoeft (1981). A reservoir analysis of the Denver earthquakes: A case of induced seismicity, J. Geophys. Res. 86, no. B2, 903–920, doi: 10.1029/JB086iB02p00903.
36. Hubbert, M. K., and W. W. Rubey (1959). Role of fluid pressure in mechanics of overthrust faulting I. Mechanics of fluid-filled porous solids and its application to overthrust faulting, Bull. Geol. Soc. Am. 70, no. 2, 115–166, doi: 10.1130/0016-7606(1959)70[115:ROFPIM]2.0.CO;2.
37. Irish, E. J. W. (1968). Lethbridge, Alberta, Geological Survey of Canada, Map 20-1967, 1:253,440 scale.
38. Kim, W. Y. (2013). Induced seismicity associated with fluid injection into a deep well in Youngstown, Ohio, J. Geophys. Res. 118, no. 7, 3506–3518, doi: 10.1002/jgrb.50247.
39. King, G. E. (2010). Thirty years of gas shale fracturing: What have we learned? SPE Annual Technical Conference and Exhibition, Florence, Italy, 19–22 September, Society of Petroleum Engineers, doi: 10.2118/133456-MS.
40. Laske, G., G. Masters, Z. Ma, and M. Pasyanos (2013). Update on CRUST1.0: A 1-degree global model of Earth’s crust, EGU General Assembly Conference Abstracts, Vienna, Austria, 7–12 April 2013, Vol. 15, 2658 pp.
41. Lemieux, S. (1999). Seismic reflection expression and tectonic significance of Late Cretaceous extensional faulting of the Western Canada sedimentary basin in southern Alberta, Bull. Can. Petrol. Geol. 47, no. 4, 375–390.
42. Lemieux, S., G. M. Ross, and F. A. Cook (2000). Crustal geometry and tectonic evolution of the Archean crystalline basement beneath the southern Alberta Plains, from new seismic reflection and potentialfield studies, Can. J. Earth Sci. 37, no. 11, 1473–1491, doi: 10.1139/e00-065.
43. Lyatsky, H., D. Pană, R. Olson, and L. Godwin (2004). Detection of subtle basement faults with gravity and magnetic data in the Alberta basin, Canada: A data-use tutorial, TLE 23, no. 12, 1282–1288, doi: 10.1190/leedff.23.1282_1.
44. Lyatsky, H. V., and D. I. Pană (2003). Catalogue of selected regional gravity and magnetic maps of northern Alberta, Alberta Geol. Surv., Alberta Energy and Utilities Board.
45. Lyatsky, H. V., D. I. Pană, and M. Grobe (2005). Basement structure in central and southern Alberta, insights from gravity and magnetic maps, Energy and Utilities Board (EUB)/Alberta Geol. Surv. Spec. Rept. 72, 76 pp.
46. Macqueen, R. W., and C. A. Sandberg (1970). Stratigraphy, age, and interregional correlation of the Exshaw Formation, Alberta Rocky Mountains, Bull. Can. Petrol. Geol. 18, no. 1, 32–66.
47. Majer, E. L., R. Baria, M. Stark, S. Oates, J. Bommer, B. Smith, and H. Asanuma (2007). Induced seismicity associated with enhanced geothermal systems, Geothermics 36, no. 3, 185–222, doi: 10.1016/j.geothermics.2007.03.003.
48. Maxwell, S. C., and C. L. Cipolla (2011). What does microseismicity tell us about hydraulic fracturing? SPE Annual Technical Conference and Exhibition, Denver, Colorado, 30 October–2 November, Society of Petroleum Engineers, doi: 10.2118/146932-MS.
49. Maxwell, S. C., M. Jones, R. Parker, S. Leaney, M. Mack, D. Dorvall, D. D’Amico, J. Logel, E. Anderson, and K. Hammermaster (2010). Fault activation during hydraulic fracturing, 72nd EAGE Conference and Exhibition, Barcelona, Spain, 14 June.
50. McGarr, A. (2014). Maximum magnitude earthquakes induced by fluid injection, J. Geophys. Res. 119, no. 2, 1008–1019, doi: 10.1002/2013JB010597.
51. McKenzie, D. P. (1969). The relation between fault plane solutions for earthquakes and the directions of the principal stresses, Bull. Seismol. Soc. Am. 59, no. 2, 591–601.
52. Mei, S. (2009a). Geologist-controlled trends versus computer-controlled trends: Introducing a high-resolution approach to subsurface structural mapping using well-log data, trend surface analysis, and geospatial analysis, Can. J. Earth Sci. 46, no. 5, 309–329, doi: 10.1139/E09-024.
53. Mei, S. (2009b). New insights on faults in the Peace River arch region, northwest Alberta, based on existing well-log data and refined trend surface analysis, Can. J. Earth Sci. 46, no. 1, 41–65, doi: 10.1139/E09-006.
54. Monger, J. W. H., and R. Price (2002). The Canadian Cordillera: Geology and tectonic evolution, CSEG Recorder 27, no. 2, 17–36.
55. Pană, D. I., and B. A. van der Pluijm (2014). Orogenic pulses in the Alberta Rocky Mountains: Radiometric dating of major faults and comparison with the regional tectono-stratigraphic record, Bull. Geol. Soc. Am. no. B31069-1, doi: 10.1130/B31069.1.
56. Parotidis, M., S. A. Shapiro, and E. Rothert (2004). Back front of seismicity induced after termination of borehole fluid injection, Geophys. Res. Lett. 31, no. 2, doi: 10.1029/2003GL018987.
57. Price, R. A. (1994). Cordilleran tectonics and the evolution of the Western Canada sedimentary basin, in Geological Atlas of the Western Canada Sedimentary Basin, G. Mossop and I. Shetsen (Editors), Canadian Society of Petroleum Geologists and Alberta Research Council, Calgary, Canada, 13–24.
58. Reiter, K., O. Heidbach, D. Schmitt, K. Haug, M. Ziegler, and I. Moeck (2014). A revised crustal stress orientation database for Canada, Tectonophysics 636, 111–124, doi: 10.1016/j.tecto.2014.08.006.
59. Reyes, C. G., and M. E. West (2011). The waveform suite: A robust platform for manipulating waveforms inMATLAB, Seismol. Res. Lett. 82, 104–110, doi: 10.1785/gssrl.82.1.104.
60. Ristau, J., G. C. Rogers, and J. F. Cassidy (2007). Stress in western Canada from regional moment tensor analysis, Can. J. Earth Sci. 44, no. 2, 127–148, doi: 10.1139/e06-057.
61. Rokosh, C. D., S. Lyster, S. D. A. Anderson, A. P. Beaton, H. Berhane, T. Brazzoni, D. Chen, Y. Cheng, T. Mack, C. Pană, and J. G. Pawlowicz (2012). Summary of Alberta’s shale- and siltstone-hosted hydrocarbon resource potential, Energy Resources Conservation Board, Energy Resources Conservation Board (ERCB)/Alberta Geological Survey (AGS) Open-File Rept. 2012-06, 327 pp.
62. Ross, G. M., and D. W. Eaton (1999). Basement reactivation in the Alberta basin: Observational constraints and mechanical rationale, Bull. Can. Petrol. Geol. 47, no. 4, 391–411.
63. Russel, L. S., and R. W. Landes (1940). Geology of the southern Alberta Plains, Geological Survey of Canada Memoir 221, Department of Mines and Resources, Mines and Geology Branch, Bureau of Geology and Topography, 1–128.
64. Rutledge, J., R. Downie, S. Maxwell, J. Drew, and T. Fischer (2013). Extension-shear microseismic mechanisms during hydraulic fracturing, 2013 SEG Annual Meeting, Houston, Texas, 22–27 September, Society of Exploration Geophysicists.
65. Saikia, C. K. (1994). Modified frequency–wavenumber algorithm for regional seismograms using Filon’s quadrature: Modelling of Lg waves in eastern North America, Geophys. J. Int. 118, no. 1, 142–158, doi: 10.1111/j.1365-246X.1994.tb04680.x.
66. Schaff, D. P (2008). Semiempirical statistics of correlation-detector performance, Bull. Seismol. Soc. Am. 98, 1495–1507, doi: 10.1785/0120060263.
67. Schmitt, D. R., C. A. Currie, and L. Zhang (2012). Crustal stress determination from boreholes and rock cores: Fundamental principles, Tectonophysics 580, 1–26, doi: 10.1016/j.tecto.2012.08.029.
68. Schorlemmer, D., S. Wiemer, and M. Wyss (2005). Variations in earthquakesize distribution across different stress regimes, Nature 437, no. 7058, 539–542, doi: 10.1038/nature04094.
69. Schultz, R., V. Stern, and Y. J. Gu (2014). An investigation of seismicity clustered near the Cordel Field, west central Alberta, and its relation to a nearby disposal well, J. Geophys. Res. 119, no. 4, 3410–3423, doi: 10.1002/2013JB010836.
70. Schultz, R., V. Stern, Y. J. Gu, and D. Eaton (2015). Detection threshold and location resolution of the Alberta Geological Survey earthquake catalog, Seismol. Res. Lett. 86, no. 2A, 385–397, doi: 10.1785/ 0220140203.
71. Schultz, R., V. Stern, M. Novakovic, G. Atkinson, and Y. J. Gu (2015). Hydraulic fracturing and the Crooked Lake sequences: Insights gleaned from regional seismic networks, Geophys. Res. Lett. 42, no. 8, 2750–2758, doi: 10.1002/2015GL063455.
72. Shapiro, S. A., E. Huenges, and G. Borm (1997). Estimating the crust permeability from fluid-injection-induced seismic emission at the KTB site, Geophys. J. Int. 131, no. 2, F15–F18, doi: 10.1111/j.1365-246X.1997.tb01215.x.
73. Shi, Y., and B.A. Bolt (1982). The standard error of the magnitude– frequency b value, Bull. Seismol. Soc. Am. 72, 1677–1687.
74. Skoumal, R. J., M. R. Brudzinski, and B. S. Currie (2015). Earthquakes induced by hydraulic fracturing in Poland Township, Ohio, Bull. Seismol. Soc. Am. 105, 189–197, doi: 10.1785/0120140168.
75. Stern, V. H., R. J. Schultz, L. Shen, Y. J. Gu, and D. W. Eaton (2013). Alberta earthquake catalogue, version 1.0, September 2006 through December 2010, Alberta Geol. Surv. Open-File Rept. 2013-15, 36 pp.
76. Stockmal, G. S., D. Lebel, M. E. Mcmechan, and P. A. Mackay (2001). Structural style and evolution of the triangle zone and external Foothills, southwestern Alberta: Implications for thin-skinned thrust-and-fold belt mechanics, Bull. Can. Petrol. Geol. 49, no. 4, 472–496.
77. Struik, L. C. (1988). Crustal evolution of the eastern Canadian Cordillera, Tectonics 7, no. 4, 727–747, doi: 10.1029/TC007i004p00727.
78. Telesca, L. (2010). Analysis of the cross-correlation between seismicity and water level in the Koyna area of India, Bull. Seismol. Soc. Am. 100, 2317–2321, doi: 10.1785/0120090392.
79. Ugalde, H. A., S. L. Underhay, W. A. Morris, and K. Markham (2008). Evidence for basement fault reactivation in southern Alberta: An integrated topography and airborne magnetics approach, CSEG Recorder 33, no. 1, 1–16.
80. U.S. Energy Information Administration (2013). Technically recoverable shale oil and shale gas resources: An assessment of 137 shale formations in 41 countries outside the United States, U.S. Department of Energy/ Energy Information Administration (EIA), Washington, D.C., 730 pp., http://www.eia.gov/analysis/studies/worldshalegas (last accessed February 2015).
81. Vavryčuk, V. (2015). Moment tensor decompositions revisited, J. Seismol. 19, no. 1, 231–252, doi: 10.1007/s10950-014-9463-y.
82. Waldhauser, F., and W. L. Ellsworth (2000). A double-difference earthquakes location algorithm: Method and application to the northern Hayward fault, California, Bull. Seismol. Soc. Am. 90, 1353–1368, doi: 10.1785/0120000006.
83. Warpinski, N. R., J. Du, and U. Zimmer (2012). Measurements of hydraulicfracture- induced seismicity in gas shales, SPE Prod. Operations 27, no. 3, 240–252, doi: 10.2118/151597-PA.
84. Waters, G., H. Ramakrishnan, J. Daniels, D. Bentley, J. Belhadi, and M. Ammerman (2009). Utilization of real time microseismic monitoring and hydraulic fracture diversion technology in the completion of Barnett shale horizontal wells, presented at The Offshore Technology Conference, Houston, Texas, paper OTC 20268, 4–7.
85. Wessel, P., and W. H. Smith (1998). New, improved version of Generic Mapping Tools released, Eos Trans. AGU 79, no. 47, 579–579, doi: 10.1029/98EO00426.
86. Wessels, S. A., A. De La Pena, M. Kratz, S. Williams-Stroud, and T. Jbeili (2011). Identifying faults and fractures in unconventional reservoirs through microseismic monitoring, First Break 29, no. 7, 99–104.
87. Wright, G. N., M. E. McMechan, and D. E. G. Potter (1994). Structure and architecture of theWestern Canada sedimentary basin, in Geological Atlas of the Western Canada Sedimentary Basin, G. D. Mossop and I. Shetsen (Editors), Alberta Research Council, Edmonton, Alberta, 25–40.
88. Yang, Y., M. Zoback, M. Simon, and T. Dohmen (2013). An integrated geomechanical and microseismic study of multi-well hydraulic fracture stimulation in the Bakken Formation, Unconventional Resources Technology Conference, Denver, Colorado, 12–14 August, Society of Petroleum Engineers, doi: 10.1190/URTEC2013-056.
89. Zaitlin, B., J. Kennedy, and S. Kehoe (2010). The Alberta Bakken: A new, unconventional tight oil resource play, BMO Capital Markets Oil and Gas Report, 21 pp.
90. Zaitlin, B., W. S. Low, J. Kennedy, and S. Kehoe (2011). BMO technical update: The Alberta Bakken petroleum system (ABPS) is “steady as she goes” an emerging unconventional tight oil resource play, BMO Capital Markets Oil and Gas Report, 34 pp.
91. Zhang, Y., M. Person, J. Rupp, K. Ellett, M. A. Celia, C. W. Gable, B. Bowen, J. Evans, K. Bandilla, P. Mozley, et al. (2013). Hydrogeologic controls on induced seismicity in crystalline basement rocks due to fluid injection into basal reservoirs, Groundwater 51, no. 4, 525–538, doi: 10.1111/gwat.12071.