Effect of different percentages of biodiesel-diesel blends on injection, spray, combustion, performance, and emission characteristics of a diesel engine

Fuel

Volumn 139, Issue , 2015, Pages 537-545

  Lahane, Subhash ^a   Subramanian, K A ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

Diesel engine; In line fuel pressure; NOx emission; Spray penetration; Wall impingement

Indexed keywords

BIODIESEL; CARBON MONOXIDE; COMBUSTION; DIESEL ENGINES; ENGINES; FUELS; IGNITION; NITROGEN OXIDES;

COMPARATIVE STUDIES; CYLINDER TEMPERATURES; DIRECT INJECTION DIESEL ENGINES; EMISSION CHARACTERISTICS; FUEL PRESSURE; NOX EMISSIONS; SPRAY PENETRATION; WALL IMPINGEMENT;

DIRECT INJECTION;

EID: 84949117158     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2014.09.036     Document Type: Article

References (30)

1. K.A. Subramanian, and S. Lahane Comparative assessment of injection, combustion, performance and emission characteristics of a diesel engine for biodiesel-diesel blends Int J Renew Energy Tech 3 4 2013 410 429
2. K.A. Subramanian, and S. Lahane Comparative evaluations of injection and spray characteristics of a diesel engine using karanja biodiesel-diesel blends Int J Energy Res 37 2013 582 597
3. Choi CY, Bower GR, Reitz RD. Effects of biodiesel blended fuels and multiple injections on DI diesel engines. SAE 970218; 1997.
4. B. Kegl Biodiesel usage at low temperature Fuel 2007 10.1016/j.fuel.2007.06.023
5. B. Kegl, and A. Hribernik Experimental analysis of injection characteristics using biodiesel fuel Energy Fuels 20 2006 2239 2248
6. B. Kegl Numerical analysis of injection characteristics using biodiesel fuel Fuel 85 2006 2377 2387
7. C.E. Ejim, B.A. Fleck, and A. Amirfazli Analytical study for atomization of biodiesels and their blends in a typical injector: surface tension and viscosity effects Fuel 86 2007 1534 1544
8. Tat ME, Gerpen JH. Measurement of biodiesel speed of sound and its impact on injection timing. Report by NREL/SR-510-31462-2003.
9. Lahane S, Subramanian KA. Modelling and CFD simulation of effects of spray penetration on piston bowl impingement in a DI diesel engine for biodiesel-diesel blend (B20). In: Proceeding of ASME ICED Spring Technical Conference; 2012: 163-70.
10. Y. Gao, J. Deng, C. Li, F. Dang, Z. Liao, and Z. Wu Experimental study of the spray characteristics of biodiesel based on inedible oil Int J Biotechnol Adv 27 2009 616 624
11. P.K. Sahoo, and L.M. Das Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine Fuel 88 2009 994 999
12. D.C. Rakopoulos Heat release analysis of combustion in heavy-duty turbocharged diesel engine operating on blends of diesel fuel with cottonseed or sunflower oils and their bio-diesel Fuel 96 2012 524 534
13. Y.C. Sharma, B. Singh, and S.N. Upadhyay Advancements in development and characterization of biodiesel: a review Fuel 87 2008 2355 2373
14. M. Zheng, M.C. Mulenga, G.T. Reader, M. Wang, D.S.K. Ting, and J. Tjong Biodiesel engine performance and emissions in low temperature combustion Fuel 87 2008 714 722
15. G. Moon, Y. Lee, K. Choi, and D. Jeong Emission characteristics of diesel, gas to liquid, and biodiesel-blended fuels in a diesel engine for passenger cars Fuel 89 2010 3840 3846
16. D.H. Qi, L.M. Geng, H. Chen, Y.Z.H. Bian, J. Liu, and X.C.H. Ren Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil Renew Energy 34 2009 2606 2613
17. M.S. Graboski, and R.L. McCormick Combustion of fat and vegetable oil derived fuels in diesel engines Prog Energy Combust Sci 24 2 1998 125 164
18. P.K. Sahoo, and L.M. Das Process optimization for biodiesel production from Jatropha, Karanja and Polanga oils Fuel 88 2009 1588 1594
19. P.K. Sahoo, L.M. Das, M.K.G. Babu, and S.N. Naik Biodiesel development from high acid value polanga seed oil and performance evaluation in a CI engine Fuel 86 2007 448 454
20. Rakopoulos CD, Hountalas DT, Zannis TC, Levendis YA. Operational and environmental evaluation of diesel engines burning oxygen-enriched intake air or oxygen-enriched fuels: a review. SAE Paper No. 2004-01-2924.
21. S. Bajpai, P.K. Sahoo, and L.M. Das Feasibility of blending karanja vegetable oil in petro-diesel and utilization in a direct injection diesel engine Fuel 88 2009 705 711
22. P. Mahanta, S.C. Mishra, and Y.S. Kushwah An experimental study of pongamia pinnata L. oil as a diesel substitute IMechE Part A: J Power Energy 20 2006 803 808
23. B. Lin, J. Huang, and D. Huang Experimental study of the effects of vegetable oil methyl ester on DI diesel engine performance characteristics and pollutant emissions Fuel 88 2009 1779 1785
24. F. Caresana Impact of biodiesel bulk modulus on injection pressure and injection timing, the effect of residual pressure Fuel 90 2011 477 485
25. S.Y. No Inedible vegetable oils and their derivatives for alternative diesel fuels in CI engines: a review Renew Sustain Energy Rev 15 2011 131 149
26. H. An, W.M. Yang, S.K. Chou, and K.J. Chua Combustion and emissions characteristics of diesel engine fueled by biodiesel at partial load conditions Appl Energy 99 2012 363 371
27. H. An, W.M. Yang, A. Maghbouli, J. Li, S.K. Chou, and K.J. Chua Performance, combustion and emission characteristics of biodiesel derived from waste cooking oils Appl Energy 112 2013 493 499
28. S. Som, D.E. Longman, A.I. Ramirez, and S.K. Aggarwal A comparison of injector flow and spray characteristics of biodiesel with petro diesel Fuel 89 2010 4014 4024
29. S. Lahane, and K.A. Subramanian Impact of nozzle holes configuration on fuel spray, wall impingement and NOx emission of a diesel engine for biodiesel-diesel blend (B20) Appl Therm Eng 64 2014 307 314
30. O.A. Kuti, J. Zhu, K. Nishida, X. Wang, and Z. Huang Characterization of spray and combustion processes of biodiesel fuel injected by diesel engine common rail system Fuel 104 2013 838 846