Bond of reinforcement in ultra-high-performance concrete

ACI Structural Journal

Volumn 112, Issue 6, 2015, Pages 851-860

  Yuan, Jiqiu ^a   Graybeal, Benjamin ^b  

^a TURNER FAIRBANK HIGHWAY RESEARCH CENTER   (United States)

^b FEDERAL HIGHWAY ADMINISTRATION   (United States)

Author keywords

Anchorage; Bond strength; Development length; Fiber reinforced concrete; Reinforcing bar; Splice length; Ultra high performance concrete (UHPC)

Indexed keywords

ANCHORAGES (FOUNDATIONS); BOND STRENGTH (MATERIALS); FIBER REINFORCED CONCRETE; REBAR; STEEL FIBERS;

CEMENTITIOUS COMPOSITES; CEMENTITIOUS MATRICES; DEFORMED REINFORCING BAR; DEVELOPMENT LENGTH; REINFORCING STEEL BAR; SPLICE LENGTH; STRUCTURAL SYSTEMS; ULTRA HIGH PERFORMANCE CONCRETES (UHPC);

ULTRA-HIGH PERFORMANCE CONCRETE;

EID: 84948469227     PISSN: 08893241     EISSN: None     Source Type: Journal    
DOI: 10.14359/51687912     Document Type: Article

References (24)

1. Ultra-High Performance Concrete, U. S., Department of Transportation, Federal Highway Administration, https://www.fhwa.dot.gov/research/resources/uhpc. (last accessed Oct. 13, 2015)
2. Graybeal, B., "Behavior of Field-Cast Ultra-High Performance Concrete Bridge Deck Connections under Cyclic and Static Structural Loading," Report No. PB2011-101995, National Technical Information Service, Springfield, VA, 2010.
3. Graybeal, B., "Development of a Field-Cast Ultra-High Performance Concrete Composite Connection Detail for Precast Concrete Bridge Decks," Report No. PB2012-107569, National Technical Information Service, Springfield, VA, 2012.
4. Fehling, E.; Lorenz, P.; and Leutbecher, T., "Experimental Investigations on Anchorage of Rebars in UHPC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, 2012, pp. 533-540.
5. Swenty, M., and Graybeal, B., "Influence of Differential Deflection on Staged Construction Deck-Level Connections," Report No. FHWAHRT-12-057, FHWA, U.S. Department of Transportation, National Technical Information Service Accession No. PB2012-111528, 2012.
6. Holschemacher, K.; Weiße, D.; and Klotz, S., "Bond of Reinforcement in Ultra High Strength Concrete," Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2004, pp. 375-387.
7. Holschemacher, K.; Weiße, D.; and Klotz, S., "Bond of Reinforcement in Ultra High-Strength Concrete," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. I, SP-228, H. G. Russell, ed., American Concrete Institute, Farmington Hills, MI, 2005, pp. 513-528.
8. ACI Committee 408, "Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03)," American Concrete Institute, Farmington Hills, MI, 2003, 49 pp.
9. Yuan, J., and Graybeal, B., "Bond Behavior of Reinforcing Steel in Ultra-High Performance Concrete," FHWA-HRT-14-090, Department of Transportation, Federal Highway Administration, McLean, VA, 2014.
10. Russell, H. G., and Graybeal, B., "Ultra-High Performance Concrete: A State-of-The-Art Report for the Bridge Community," U.S. Department of Transportation, Federal Highway Administration, FHWA-HRT-13-60, June 2013, 171 pp.
11. Graybeal, B., and Baby, F., "Development of Direct Tension Test Method for Ultra-High-Performance Fiber Reinforce Concrete," ACI Materials Journal, V. 110, No. 2, Mar.-Apr. 2013, pp. 177-186.
12. Graybeal, B., "Tensile Mechanical Response of Ultra-High-Performance Concrete," Advances in Civil Engineering Materials, 2015, doi:10.1520/ACEM20140029.10.1520/ACEM20140029
13. ASTM A615/A615M-13, "Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement," ASTM International, West Conshohocken, PA, 2013, 7 pp.
14. ASTM A1035/A1035M-13b, "Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement," ASTM International, West Conshohocken, PA, 2013, 6 pp.
15. ASTM A370-12a, "Standard Test Methods and Definitions for Mechanical Testing of Steel Products," ASTM International, West Conshohocken, PA, 2012, 48 pp.
16. ACI Committee 408, "Guide for Lap Splice and Development Length of High Relative Rib Area Reinforcing Bars in Tension and Commentary (ACI 408.3R-09)," American Concrete Institute, Farmington Hills, MI, 2009, 12 pp.
17. Azizinamini, A.; Stark, M.; Toller, J. J.; and Ghosh, S. K., "Bond Performance of Reinforcing Bars Embedded in High-Strength Concrete," ACI Structural Journal, V. 90, No. 5, Sept.-Oct. 1993, pp. 554-561.
18. ACI Committee 318, "Building Code Requirements for Structural Concrete and Commentary (ACI 318-11)," American Concrete Institute, Farmington Hills, MI, 2011, 503 pp.
19. CSA A23.3-94, "Design of Concrete Structures," Canadian Standards Association, Mississauga, ON, Canada, 1994.
20. Darwin, D.; Idun, E. K.; Zuo, J.; and Tholen, M. L., "Reliability-Based Strength Reduction Factor for Bond," ACI Structural Journal, V. 95, No. 4, July-Aug. 1998, pp. 434-443.
21. Darwin, D.; Tholen, M. L.; Idun, E. K.; and Zuo, J., "Splice Strength of High Relative Rib Area Reinforcing Bars," ACI Structural Journal, V. 93, No. 1, Jan.-Feb. 1996, pp. 95-107.
22. Walker, W. T., "Laboratory Tests of Spaced and Tied Reinforcing Bars," ACI Journal Proceedings, V. 47, No. 5, May 1951, pp. 365-372.
23. Chamberlin, S. J., "Spacing of Spliced Bars in Tension Pullout Specimens," ACI Journal Proceedings, V. 49, No. 3, Mar. 1952, pp. 261-274.
24. Chinn, J.; Ferguson, P. M.; and Thompson, J. N., "Lapped Splices in Reinforced Concrete Beams," ACI Journal Proceedings, V. 52, No. 2, Feb. 1955, pp. 201-213.