Passive thermal control in residential buildings using phase change materials

Renewable and Sustainable Energy Reviews

Volumn 55, Issue , 2016, Pages 371-398

  Kenisarin, Murat ^a   Mahkamov, Khamid ^a  

^a NORTHUMBRIA UNIVERSITY   (United Kingdom)

Author keywords

Fatty acids; Gypsum wallboard; Latent heat storage; Lightweight buildings; Paraffins; Passive solar buildings; Phase change materials

Indexed keywords

BUILDING MATERIALS; ENERGY UTILIZATION; FATTY ACIDS; GYPSUM; HEAT STORAGE; LATENT HEAT; PARAFFINS; PASSIVE SOLAR; SOLAR HEATING; WALLS (STRUCTURAL PARTITIONS);

BUILDING STRUCTURE; ENERGY-CONSUMPTION; FATTY ACID ESTERS; GYPSUM WALLBOARDS; LATENT HEAT STORAGE; LIGHTWEIGHT BUILDING; PAPER ANALYSIS; RESIDENTIAL BUILDING; STATE OF THE ART; THERMAL CONTROL;

PHASE CHANGE MATERIALS;

EID: 84947739602     PISSN: 13640321     EISSN: 18790690     Source Type: Journal    
DOI: 10.1016/j.rser.2015.10.128     Document Type: Review

References (180)

1. Buildings Energy Datebook, 2006. US Department of Energy and Annual Energy Review 2007. DOE/EIA-0384 (2007). Energy Information Administration, U.S. Department of Energy; June 2008. Available at (http://www.eia.doe.gov/aer/pdf/aer.pdf).
2. Kornevall C. EPBD - The EU's buildings platform; Stakeholders want to move on quicker despite the slow start in many Member States. Available at (http://www.eeb-blog.org/2008/02/epbd-the-eus-bu.html).
3. D. Hawes, D. Banu, and D. Feldman Latent heat storage in concrete Sol Energy Mater 19 3-5 1989 335 348
4. A. Abhat Low temperature latent heat thermal energy storage: heat storagematerials Sol Energy 30 40 1983 313 332
5. M.M. Kenisarin Short-term storage of solar energy. 1. Low temperature phase change materials Appl Sol Energy 29 2 1993 46 64
6. S.M. Hasnain Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques Energy Convers Manag 39 11 1998 1127 1138
7. S.M. Hasnain Review on sustainable thermal energy storage technologies, Part II: cool thermal storage Energy Convers Manag 39 11 1998 1139 1153
8. B. Zalba, J.M. MarÍn, L.F. Cabeza, and H. Mehling Review on thermal energy storage with phase change: materials, heat transfer analysis and applications Appl Therm Eng 23 3 2003 251- 2583
9. M.M. Farid, A.M. Khudhair, S.A.K. Razack, and S. Al-Hallaj A review on phase change energy storage: materials and applications Energy Convers Manag 45 9 2004 1597 1615
10. D. Rozanna, T.G. Chuah, A. Salmiah, T.S. Choong, and M. Sa'ari Fatty acids as phase change materials (PCMs) for thermal energy storage: a review Int J Green Energy 1 4 2005 495 513
11. C.D. Sharma, and K. Sagara Latent heat storage materials and systems. A review Int J Green Energy 2 1 2005 1 56
12. A.F. Regin, S.C. Solanki, and J.S. Saini Heat transfer characteristics of thermalenergy storage system using PCM capsules: a review Renew Sustain Energy Rev 12 2008 2438 2458
13. P. Verma, and S.K. Varun Singal. Review of mathematical modeling on latent heatthermal energy storage systems using phase-change material Renew Sustain Energy Rev 12 4 2008 999 1031
14. A. Sharma, V.V. Tyagi, C.R. Chen, and D. Buddhi Review on thermal energy storage with phase change materials and applications Renew Sustain Energy Rev 13 2 2009 318 345
15. S. Jegadheeswaran, and S.D. Pohekar Performance enhancement in latent heatthermal storage system: a review Renew Sustain EnergyRev 13 2009 2225 2244
16. M.M. Kenisarin High-temperature phase change materials for thermal energy storage Renew Sustain Energy Rev 14 3 2010 955 970
17. F. Agyenim, N. Hewitt, P. Eames, and M. Smyth A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) Renew Sustain Energy Rev 14 2 2010 615 628
18. L.F. Cabeza, A. Castell, C. Barreneche, A. De Gracia, and A.I. Fernández Materials used as PCM in thermal energy storage in buildings: a review Renew Sustain Energy Rev 15 3 2011 1675 1695
19. C.Y. Zhao, and G.H. Zhang Review on microencapsulated phase change materials (MEPCMs): fabrication, characterization and applications Renew Sustain Energy Rev 15 8 2011 3813 3832
20. L. Fan, and J.M. Khodadadi Thermal conductivity enhancement of phase change materials for thermal energy storage: a review Renew Sustain Energy Rev 15 1 2011 24 46
21. M.M. Kenisarin, and K.M. Kenisarina Form-stable phase change materials for thermal energy storage Renew Sustain Energy Rev 16 4 2012 1999 2040
22. M. Liu, W. Saman, and F. Bruno Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems Renew Sustain Energy Rev 16 4 2012 2118 2132
23. P.B. Salunkhe, and P.S. Shembekar A review on effect of phase change material encapsulation on the thermal performance of a system Renew Sustain Energy Rev 16 8 2012 5603 5616
24. J.M. Khodadadi, L. Fan, and H. Babaei Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: a review Renew Sustain Energy Rev 24 2013 418 444
25. A. Solé, L. Miró, C. Barreneche, I. Martorell, and L.F. Cabeza Reviewofthe T-history method to determine thermophysical properties of phase change materials Renew Sustain Energy Rev 26 2013 425 436
26. A. Jamekhorshid, S.M. Sadrameli, and M. Farid A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium Renew Sustain Energy Rev 31 2014 531 542
27. K. Pielichowska, and K. Pielichowski Phase change materials for thermal energy storage Progress Mater Sci 65 2014 67 123
28. Y. Yuan, N. Zhang, W. Tao, X. Cao, and Y. He Fatty acids as phase change materials: A review Renew Sustain Energy Rev 29 2014 482 498
29. M.M. Kenisarin Thermophysical properties of some organic phase change materials for latent heat storage. A review Sol Energy 107 2014 553 575
30. A.S. Hariri, and I.C. Ward A review of thermal storage systems used in building applications Build Environ 23 1 1988 1 10
31. A. Saito Recent advances in research on cold thermal energy storage Int J Refrig 25 2 2002 177 189
32. A.M. Khudhair, and M.M. Farid A review on energy conservation in building applications with thermal storage by latent heat using phase change materials Energy Convers Manag 45 2 2004 263 275
33. Y. Zhang, G. Zhou, K. Lin, Q. Zhang, and H. Di Application of latent heat thermal energy storage in buildings: state-of-the-art and outlook Build Environ 42 6 2007 2197 2209
34. V.V. Tyagi, and D. Buddhi PCM thermal storage in buildings: a state of art Renew Sustain Energy Rev 11 6 2007 1146 1166
35. A. Pasupathy, R. Velraj, and R.V. Seeniraj Phase change material-based building architecture for thermal management in residential and commercial establishments Renew Sustain Energy Rev 12 1 2008 39 64
36. X. Wang, Y. Zhang, W. Xiao, R. Zeng, Q. Zhang, and H. Di Review on thermal performance of phase change energy storage building envelope Chin Sci Bull 54 6 2009 920 928
37. N. Zhu, Z. Ma, and S. Wang Dynamic characteristics and energy performance of buildings using phase change materials: a review Energy Convers Manag 50 12 2009 3169 3181
38. R. Baetens, B.P. Jelle, and A. Gustavsen Phase change materials for building applications: a state-of-the-art review Energy Build 42 9 2010 1361 1368
39. H.Y. Chan, S.B. Riffat, and J. Zhu Review of passive solar heating and cooling technologies Renew Sustain Energy Rev 14 2 2010 781 789
40. V. Raj, and R. Velraj Review on free cooling of buildings using phase change materials Renew Sustain Energy Rev 14 9 2010 2819 2829
41. F. Kuznik, D. David, K. Johannes, and J.J. Roux A review on phase change materials integrated in building walls Renew Sustain Energy Rev 15 1 2011 379 391
42. Y. Dutil, D.R. Rousse, N.B. Salah, S. Lassue, and L. Zalewski A review on phase change materials: mathematical modeling and simulations Renew Sustain Energy Rev 15 1 2011 112 130
43. S.B. Sadineni, S. Madala, and R.F. Boehm Passive building energy savings: a review of building envelope components Renew Sustain Energy Rev 15 8 2011 3617 3631
44. V.V. Tyagi, S.C. Kaushik, S.K. Tyagi, and T. Akiyama Development of phase change materials based microencapsulated technology for buildings: a review Renew Sustain Energy Rev 15 2 2011 1373 1391
45. P.A. Mirzaei, and F. Haghighat Modeling of phase change materials for applications in whole building simulation Renew Sustain Energy Rev 16 7 2012 5355 5362
46. E. Oró, A. De Gracia, A. Castell, M.M. Farid, and L.F. Cabeza Review on phase change materials (PCMs) for cold thermal energy storage applications Appl Energy 99 2012 513 533
47. E. Osterman, V.V. Tyagi, V. Butala, N.A. Rahim, and U. Stritih Review of PCM based cooling technologies for buildings Energy Build 49 2012 37 49
48. R. Parameshwaran, S. Kalaiselvam, S. Harikrishnan, and A. Elayaperumal Sustainable thermal energy storage technologies for buildings: a review Renew Sustain Energy Rev 16 5 2012 2394 2433
49. Y.H. Yau, and B. Rismanchi A review on cool thermal storage technologies and operating strategies Renew Sustain Energy Rev 16 1 2012 787 797
50. D. Zhou, C.Y. Zhao, and Y. Tian Review on thermal energy storage with phase change materials (PCMs) in building applications Appl Energy 92 2012 593 605
51. S.N. Al-Saadi, and Z.J. Zhai Modeling phase change materials embedded in building enclosure: a review Renew Sustain Energy Rev 21 2013 659 673
52. V. Basecq, G. Michaux, C. Inard, and P. Blondeau Short-term storage systems of thermal energy for buildings: a review Adv Build Energy Res 7 1 2013 66 119
53. M. Pomianowski, P. Heiselberg, and Y. Zhang Review of thermal energy storage technologies based on PCM application in buildings Energy Build 67 2013 56 69
54. O. Saadatian, C.H. Lim, K. Sopian, and E. Salleh A state of the art review of solar walls: concepts and applications J Build Phys 37 1 2013 55 79
55. N. Soares, J.J. Costa, A.R. Gaspar, and P. Santos Review of passive PCM latent heat thermal energy storage systems towards buildings' energy efficiency Energy Build 59 2013 82 103
56. P. Tatsidjodoung, N. Le Pierrès, and L. Luo A review of potential materials for thermal energy storage in building applications Renew Sustain Energy Rev 18 2013 327 349
57. A. Waqas, and Z. Ud Din Phase change material (PCM) storage for free cooling of buildings - a review Renew Sustain Energy Rev 18 2013 607 625
58. X.Q. Zhai, X.L. Wang, T. Wang, and R.Z. Wang A review on phase change cold storage in air-conditioning system: materials and applications Renew Sustain Energy Rev 22 2013 108 120
59. S.A. Memon Phase change materials integrated in building walls: a state of the art review Renew Sustain Energy Rev 31 2014 870 906
60. J.S. Sage-Lauck, and D.J. Sailor Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building Energy Build 79 2014 32 40
61. A. Kürklü Energy storage applications in greenhouses by means of phase change materials (PCMs): a review Renew Energy 13 1 1998 89 103
62. M. Kenisarin, and K. Mahkamov Solar energy storage using phase change materials Renew Sustain Energy Rev 11 9 2007 1913 1965
63. A. Sharma, C.R. Chen, V.V.S. Murty, and A. Shukla Solar cooker with latent heat storage systems: a review Renew Sustain Energy Rev 13 6 2009 1599 1605
64. A. Shukla, D. Buddhi, and R.L. Sawhney Solar water heaters with phase change material thermal energy storage medium: a review Renew Sustain Energy Rev 13 8 2009 2119 2125
65. L.M. Bal, S. Satya, S.N. Naik, and V. Meda Review of solar dryers with latent heat storage systems for agricultural products Renew Sustain Energy Rev 15 1 2011 876 880
66. A. Gil, M. Medrano, I. Martorell, A. Lázaro, P. Dolado, B. Zalba, and et al. State ofthe art on high temperature thermal energy storage for power generation. Part 1 - concepts, materials and modellization Renew Sustain Energy Rev 14 1 2014 31 55
67. M. Medrano, A. Gil, I. Martorell, X. Potau, and L.F. Cabeza State of the art on high temperaturethermal energy storage for power generation. Part 2 - Case studies Renew Sustain Energy Rev 14 1 2010 56 72
68. Y. Tian, and C.Y. Zhao A review of solar collectors and thermal energy storage in solar thermal applications Appl Energy 104 2013 538 553
69. S.M. Shalaby, M.A. Bek, and A.A. El-Sebaii Solar dryers with PCM as energy storage medium: a review Renew Sustain Energy Rev 33 2014 110 116
70. S. Mondal Phase change materials for smart textiles - an overview Appl Therm Eng 28 11 2008 1536 1550
71. N. Sarier, and E. Onder Organic phase change materials and their textile applications: an overview Thermochim Acta 540 2009 7 60
72. Z. Ling, Z. Zhang, G. Shi, X. Fang, L. Wang, X. Gao, and X. Liu Review on thermal management systems using phase change materials for electronic components Li-ion batteries and photovoltaic modules Renew Sustain Energy Rev 31 2014 427 438
73. K. Peippo, P. Kauranen, and P.D. Lund A multicomponent PCM wall optimized for passive solar heating Energy Build 17 4 1991 259 270
74. P. Kauranen, K. Peippo, and P.D. Lund An organic PCM storage system with adjustable melting temperature Sol Energy 46 5 1991 275 278
75. D. Feldman, M.M. Shapiro, and D. Banu Organic phase change materials for thermal energy storage Sol Energy Mater 13 1 1986 1 10
76. Salyer IO, Sirkar AK, Dantiki S. Advanced phase change materials and systems for solar passive heating and cooling or residential buildings. University of Dayton Research Institute, Final Technical Report; 1988.
77. A. SarI, A. Biçer, and Karaipekli A. Synthesis characterization, thermal properties of a series of stearic acid esters as novel solid-liquid phase change materials Mater Lett 63 13 2009 1213 1216
78. A. SarI, R. Eroʇlu, A. Biçer, and A. Karaipekli Synthesis and thermal energy storage properties of erythritol tetrastearate and erythritol tetrapalmitate Chem Eng Technol 34 1 2011 87 92
79. M.J. van Bommel, H.A.J. Oonk, and J.C. van Miltenburg Heat capacity measurements of 13 methylesters of n-carboxylic acids from methyl octanoate to methyl eicosanoate between 5 K and 350 K J Chem Eng Data 49 2004 1036 1042
80. A. Biçer, and A. SarI Synthesis and thermal energy storage properties of xylitol pentastearate and xylitol pentapalmitate as novel solid-liquid PCMs Sol Energy Mater Sol Cells 102 2012 125 130
81. R. Nikolić, M. Marinović-Cincović, S. Gadćurić, and I.J. Zsigrai New materials for solar thermal storage-solid/liquid transitions in fatty acid esters Sol Energy Mater Sol Cells 79 3 2003 285 292
82. D. Feldman, M.M. Shapiro, D. Banu, and C.J. Fuks Fatty acids and their mixtures as phase change materials for thermal energy storage Sol Energy Mater 18 3-4 1989 201 206
83. A. SarI Eutectic mixtures of some fatty acids for low temperature solar heating applications: thermal properties and thermal reliability Appl Therm Eng 25 2005 2100 2107
84. Q. Yan The thermal properties of shape-stabilized fatty acid mixtures used for wallboard Int J Sustain Energy 30 1 2011 47 54
85. M. Dirand, M. Bouroukba, A.-J. Briard, V. Chevallier, D. Petitjean, and J.-P. Corriou Temperatures and enthalpies of (solid+solid) and (solid+liquid) transitions of n-alkanes J Chem Thermodyn 34 2002 1255 1277
86. Q. Yan, C. Liang, and L. Zhang Experimental study on the thermal storage performance and preparation of paraffin mixtures used in the phase change wall Sol Energy Mater Sol Cells 92 2008 1526 1532
87. A. Karaipekli, and A. SarI Capric-myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage Renew Energy 33 12 2008 2599 2605
88. A. Karaipekli, and A. SarI Capric-myristic acid/vermiculite composite as form-stable phase change material for thermal energy storage Sol Energy 83 3 2009 323 332
89. A. Karaipekli, and A. Sari Capric acid and palmitic acid eutectic mixture applied in building wallboard for latent heat thermal energy storage J Sci Ind Res 66 6 2007 470 476
90. T. Wei, B. Zheng, J. Liu, Y. Gao, and W. Guo Structures and thermal properties of fatty acid/expanded perlite composites as form-stable phase change materials Energy Build 68 2014 587 592
91. S. Song, L. Dong, S. Chen, H. Xie, and C. Xiong Stearic-capric acid eutectic/activated-attapulgiate composite as form-stable phase change material for thermal energy storage Energy Convers Manag 81 2014 306 311
92. A. SarI, and A. Karaipekli Fatty acid esters-based composite phase change materials for thermal energy storage in buildings Appl Therm Eng 37 2012 208 216
93. J. Huang, S. Lu, X. Kong, and S. Liu Form-stable phase change materials based on eutectic mixture of tetradecanol and fatty acids for building energy storage: preparation and performance analysis Materials 6 10 2013 4758 4775
94. S. Song, L. Dong, Z. Qu, J. Ren, and C. Xiong Microencapsulated capric-stearic acid with silica shell as a novel phase change material for thermal energy storage Appl Therm Eng 70 2014 546 551
95. BASF - Micronal® PCM intelligent temperature management for buildings. Available at (http://www.micronal.de/portal/load/fid443847/BASF-Micronal-PCM-Brochure%202009-English.pdf)
96. L. Cao, F. Tang, and G. Fang Synthesis and characterization of microencapsulated paraffin with titanium dioxide shell as shape-stabilized thermal energy storage materials in buildings Energy Build 72 2014 31 37
97. 2 shell as thermal energy storage materials Chem Eng J 163 1 2010 154 159
98. W. Wang, X. Yang, Y. Fang, and J. Ding Preparation and performance of form-stable polyethylene glycol/silicon dioxide composites as solid-liquid phase change materials Appl Energy 86 2 2009 170 174
99. M. Li, Z. Wu, and J. Tan Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol-gel method Appl Energy 92 2012 456 461
100. 2 phase change composite for thermal energy storage ACS Sustain Chem Eng 1 3 2013 374 380
101. S. Yu, X. Wang, and D. Wu Microencapsulation ofn-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: Synthesis, microstructure, and performance evaluation Appl Energy 114 2014 632 643
102. 2 solid nanobowls toward smart heat storage J Phys Chem C 115 41 2011 20061 20066
103. Y. Wu, and T. Wang Preparation and characterization of hydrated salts/silica composite as shape-stabilized phase change material via sol-gel process Thermochim Acta 59 2014 10 15
104. F. He, X. Wang, and D. Wu New approach for sol-gel synthesis of microencapsulated n-octadecane phase change material with silica wall using sodium silicate precursor Energy 67 2014 223 233
105. W.G. Liang, C. Yang, G.Q. Wen, W. Wang, X.J. Ju, R. Xie, and L.Y. Chu A facile and controllable method to encapsulate phase change materials with non-toxic and biocompatible chemicals Appl Therm Eng 70 2014 817 826
106. Kedl RJ. Wallboard with latent heat storage for passive solar application. Oak Ridge National Laboratory Report ORNL/TM-11541; 1991.
107. A.K. Athienitis, C. Liu, D. Hawes, D. Banu, and D. Feldman Investigation of the thermal performance of a passive solar test-room with wall latent heat storage Build Environ 32 5 1997 405 410
108. S. Scalat, D. Banu, D. Hawes, J. Paris, F. Haghihata, and D. Feldman Full scale thermal testing of latent heat storage in wallboard Sol Energy Mater Sol Cells 44 1 1996 49 61
109. D.W. Hawes, D. Banu, and D. Feldman Latent heat storage in buildings materials Energy Build 20 1993 77 86
110. A. Karaipekli, and A. SarI Capric acid and palmitic acid eutectic mixture applied in building wallboard for latent heat thermal energy storage J Sci Ind Res 66 6 2007 470 476
111. A. SarI, A. Karaipekli, and K. Kaygusuz Capric acid and myristic acid for latent heat thermal energy storage Energy Sources Part A: Recovery Util Environ Eff 30 16 2008 1498 1507
112. D. Feldman, D. Banu, and D. Hawes Development and application of organic phase mixtures in thermal storage gypsum wallboard Sol Energy Mater Sol Cells 36 1995 147 157
113. A. SarI, A. Karapekli, and K. Kaygusuz Capric acid and stearic acid mixture impregnated with gypsum wallboard for low-temperature latent heat thermal energy storage Int J Energy Res 32 2 2008 154 160
114. L. Lv, V. Zhu, and G. Feng Impact of phase change wall room on indoor thermal environment in winter Energy Build 38 1 2006 18 24
115. S. Lv, N. Zhu, and G. Feng Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat storage Energy Build 38 2006 708 711
116. Khudhair AM, Farid M, Chen J, Hamadi N. Thermal comfort in buildings with inside walls lined with gypsum wallboards impregnated with latent heat storage materials. In: Proceedings of the 11th APCChE Congress, Kuala Lumpur, 27-30th August; 2006.
117. D. Feldman, D. Banu, D. Hawes, and E. Ghanbari Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard Sol Energy Mater 22 2-3 1991 231 242
118. D. Rozanna, A. Salmiah, T.G. Chuah, R. Mediyan, T. Chung, and Sa'ari M A study on thermal characteristics of phase change material (PCM) in gypsum board for building application J Oil Palm Res 17 2005 41 46
119. R. Mediyan Thermal characteristics of eutectic mixture of capric-lauric acids as phase change material (PCM) in gypsum board J Teknolog Proses 6 1 2007 31 38
120. D. Hawes, D. Banu, and D. Feldman Latent heat storage in concrete Sol Energy Mater 19 1989 335 348
121. D. Hawes, D. Banu, and D. Feldman Latent heat storage in concrete II Sol Energy Mater 21 1 1990 61 80
122. D.W. Hawes, and D. Feldman Absorption of phase change materials in concrete Sol Energy Mater Sol Cells 27 2 1992 91 101
123. D. Hawes, D. Banu, and D. Feldman The stability of phase change materials in concrete Sol Energy Mater 27 2 1992 102 118
124. T. Lee, D.W. Hawes, D. Banu, and D. Feldman Control aspects of latent heat storage and recovery in concrete Sol Energy Mater Sol Cells 62 2 2000 217 237
125. M. Hadjieva, R. Stoykov, and T. Filipova Composite salt-hydrate concrete system for building energy storage Renew Energy 19 1-2 2000 111 115
126. Z. Pavlík, A. Trník, J. Ondruška, M. Keppert, M. Pavlíková, P. Volfová, V. Kaulich, and R. Černý Apparent thermal properties of phase-change materials: an analysis using differential scanning calorimetry and impulse method Int J Thermophys 34 5 2013 851 864
127. P. Schossig, H.M. Henning, S. Gschwander, and T. Haussmann Micro-encapsulated phase-change materials integrated into construction materials Sol Energy Mater Sol Cells 89 2-3 2005 297 306
128. Schossig P, Henning P, Haussman T, Raicu A. Encapsulated phase-change materials integrated into construction materials. In: Futurestock 2003 - Proceedings of the 9th international conference on thermal energy storage, Warsaw, Poland; 2003.
129. X. Fang, and Z. Zhang A novel montmorillonite-based composite phase change material and its applications in thermal storage building materials Energy Build 38 4 2006 377 380
130. X. Fang, Z. Zhang, and Z. Chen Study on preparation of montmorillonite-based composite phase change materials and their applications in thermal storage building materials Energy Convers Manag 49 4 2008 718 723
131. H. Zhang, Q. Xu, Z. Zhao, J. Zhang, Y. Sun, L. Sun, F. Xu, and Y. Sawada Preparation and thermal performance of gypsum boards incorporated with microencapsulated phase change materials for thermal regulation Sol Energy Mater Sol Cells 102 2012 93 102
132. F. Kuznik, and J. Virgone Experimental assessment of phase change material for wall building use Appl Energy 86 10 2009 2038 2046
133. A.M. Borreguero, M. Carmona, M.L. Sanchez, J.L. Valverde, and J.F. Rodriguez Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio Appl Therm Eng 30 10 2010 1164 1169
134. A.M. Borreguero, M. Luz Sánchez, J.L. Valverde, M. Carmona, and J.F. Rodríguez Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content Appl Energy 88 3 2011 930 937
135. Kondo T, Ibamoto T, Yuuji T. Research on the thermal storage of PCM wallboard. In: Proceedings of the 5th workshop IEA/ECES Annex 10: phase change materials and chemical reactions for thermal energy storage, Tsu, Japan; 2000.
136. Q. Yan, L. Li, and C. Liang Thermal performance of shape-stabilized phase change paraffin wallboard Int J Sustain Energy 29 4 2010 185 190
137. A. Eddhahak-Ouni, J. Colin, and D. Bruneau On an experimental innovative setup for the macro scale thermal analysis of materials: application to the Phase Change Material (PCM) wallboards Energy Build 64 2013 231 238
138. Khudhair AM, Farid M, Chen J, Bansal P. Development and use of impregnated phase change materials in concrete for thermal comfort. In: Proceedings of the IIR-IRHACE international conference on innovative equipment and systems for comfort and food preservation, The University of Auckland (New Zealand), February 16-18; 2006.
139. A.G. Entrop, H.J.H. Brouwers, and Reinders AHME Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses Sol Energy 85 5 2011 1007 1020
140. Kosny J, Yarbrough DW. Cellulosic in sulation containing a ph ase change materials as an active thermal mass component. US Patent Application 2006/0111001 A1; 2006.
141. Kos̈ny J, Yarbrough D, Wilkes K. PCM-enhanced cellulose insulation: thermal mass in light-weight fibers. In: Ecostock 2006 - Proceedings of the 10th international conference on thermal energy storage, Stockton, USA; 2006.
142. Kosny J, Yarbrough DW, Riazzi T, Leuthold D, Smith JB, Bianchi M. Development and testing of ignition resistant microencapsulated phase change material. In: EffStock 2009 - Proceedings of 11th international conference on thermal energy storage; 2009.
143. A.C. Evers, M.A. Medina, and Y. Fang Evaluation of the thermal performance of frame walls enhanced with paraffin and hydrated salt phase change materials using a dynamic wall simulator Build Environ 45 8 2010 1755 1761
144. Castellón C, Martorell I, Roca J, Lázaro A, Zalba B, Fernández I, Navarro ME, Cabeza LF. Comparison of manufacturing techniques to use microencapsulated Phase Change Materials in sandwich panels - experimental study. In: EffStock 2009 - Proceedings of 11th international conference on thermal energy storage; 2009.
145. C. Castellón, M. Medrano, J. Roca, L.F. Cabeza, M.E. Navarro, A.I. Fernández, A. Lazaro, and B. Zalba Effect of microencapsulated phase change material in sandwich panels Renew Energy 35 10 2010 2370 2374
146. Medina MA, Stewart R. Phase-change frame walls (PCFWS) for peak demand reduction, load shifting, energy conservation, and comfort. In: Proceedings of the sixteenth symposium on improving building systems in hot and humid climates, Plano, TX, December 15-17; 2008.
147. M. Zhang, M.A. Medina, and J.B. King Development of a thermally enhanced frame wall with phase-change materials for on-peak air conditioning demand reduction and energy savings in residential buildings Int J Energy Res 29 9 2005 795 809
148. A. Carbonari, M. De Grassi, C. Di Perna, and P. Principi Numerical and experimental analyses of PCM containing sandwich panels for prefabricated walls Energy Build 38 5 2006 472 483
149. Delta®-Cool 24 Phase change material - Thermal storage mass for comfortable interior climate. Available at (http://www.ecotec-energiesparhaus.de/fileadmin/pdf/Doerken-Delta-Cool-PCM-Bauteile.pdf)
150. Rubitherm Technologies GmbH. Available at (http://www.rubitherm.de)
151. K764 Knauf PCM SmartBoardTM 23/26. Available at (http://trockenbau-saygin.com/pdf/platten/K764-Knauf-PCM-SmartBoardTM-2326.pdf)
152. Kissock JK, Hannig JM, Whitney TI, Drake ML. Early results from testing phase change wallboard. In: First workshop of the IEA Annex 10: phase change materials and chemical reactions for thermal energy storage, April 16-17, Adana, Turkey; 1998.
153. M. Ahmad, A. Bontemps, H. Sallee, and D. Quenard Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material Energy Build 38 6 2006 673 681
154. M. Ahmad, A. Bontemps, H. Sallee, and D. Quenard Experimental investigation and computer simulation of thermal behavior of wallboards containing a phase change material Energy Build 38 4 2006 357 366
155. A. Bontemps, M. Ahmad, K. Johannès, and H. Sallée Experimental and modelling study of twin cells with latent heat storage walls Energy Build 43 9 2011 2456 2461
156. Zhang M, Medina MA, King JB. Phase-change frame walls (PCFWs) for on-peak demand reduction and energy conservation in residential buildings: Development, construction and evaluation. In: Proceedings of the 14th symposium on improving building systems in hot and humid climates, Richardson, TX; 2004.
157. A.F. Rudd Phase-change material wallboard for distributed thermal storage in buildings ASHRAE Trans 99 2 1993 339 346
158. Ismail KAR., and Castro JNC. PCM thermal insulation in buildings Int J Energy Res 21 14 1997 1281 1296
159. Principi P, Di Perna C, Borrelli G, Carbonari A. Experimental energetic evaluation of changeable thermal inertia PCM containing walls. In: Proceedings of the International Conference on Passive and Low Energy Cooling for the Built Environment, Santorini, Greece; May 2005. p. 481-6.
160. Principi P, Di Perna C, Borrelli G, Carbonari A. Monitoring system for the evaluation of the energetic behavior of PCM containing walls. In: Proceedings of the international conference on passive and low energy cooling for the built environment, Santorini, Greece; May 2005. p. 475-80.
161. Feng G, Liang R, Li G. Research on cool storage time of a phase change wallboard room in the summer. In: ICEBO 2006 - China envelope technologies for building energy efficiency Vol. II, Shenzhen; 2006.
162. S.L. Lv, N. Zhu, and G.H. Feng Impact of phase change wall room on indoor thermal environment in winter Energy Build 38 1 2006 18 24
163. S.L. Lv, G.H. Feng, N. Zhu, and D.Y. Li Experimental study and evaluation of latent heat storage in phase change materials wallboards Energy Build 39 10 2007 1088 1091
164. L.F. Cabeza, M. Medrano, C. Castellón, A. Castell, C. Solé, J. Roca, and M. Nogués Thermal energy storage with phase change materials in building envelopes Contrib Sci 3 4 2007 501 510
165. L.F. Cabeza, C. Castellon, M. Nogues, M. Medrano, R. Leppers, and O. Zubillaga Use of microencapsulated PCM in concrete walls for energy savings Energy Build 39 2 2007 113 119
166. Khudhair AM, Farid MM. Use of phase change materials for thermal comfort and electrical energy peak load shifting: experimental investigations. In: Proceedings of ISES solar world congress 2007: solar energy and human settlement, Springer Berlin Heidelberg, 2009, pp. 283-288.
167. Khudhair AM, Farid M, Chen J, Hamadi N. Use of latent heat storage materials for thermal comfort in full-scale size buildings: Theoretical and experimental investigations. In: Proceedings of the IIR-IRHACE international conference on innovative equipment and systems for comfort and food preservation, The University of Auckland (New Zealand), February 16-18; 2006.
168. Khudhair AM, Farid M, Chen J, Hamadi N. Thermal comfort in buildings with inside walls lined with gypsum wallboards impregnated with latent heat storage materials. In: Proceedings of the 11th APCChE congress, Kuala Lumpur, 27-30th August; 2006.
169. C. Völker, O. Kornadt, and M. Ostry Temperature reduction due to the application of phase change materials Energy Build 40 5 2008 937 944
170. C. Völker, and O. Kornadt Experimentelle und numerische Untersuchung zur Reduktion sommerlicher Überhitzung durch Phasenübergangsmaterialien Z WKSB 56 2006 3 9
171. F. Kuznik, J. Virgone, and J.-J. Roux Energetic efficiency of room wall containing PCM wallboard: a full-scale experimental investigation Energy Build 40 2008 148 156
172. F. Kuznik, and J. Virgone Experimental investigation on wallboard containing phase change material: Data for validation of numerical modeling Energy Build 41 5 2009 561 570
173. Y. Konuklu, and H.Ö. Paksoy Phase change material sandwich panels for managing solar gain in buildings J Sol Energy Eng 131 4 2009 041012-041012-7
174. A. Castell, I. Martorell, M. Medrano, G. Pérez, and L.F. Cabeza Experimental study of using PCM in brick constructive solutions for passive cooling Energy Build 42 4 2010 534 540
175. C. Castellón, A. Castell, M. Medrano, I. Martorell, and L.F. Cabeza Experimental study of PCM inclusion in different building envelopes J Sol Energy Eng 131 4 2009 041006-041006-6
176. L. Bragança, S. Russo Ermolli, and H. Koukkari Phase changing materials in buildings Int J Sustain Build Technol Urban Dev 2 1 2011 43 51
177. Ermolli SR, Koukkari H, Braganca L. Phase changing materials in building elements; 2011. Available at (http://repositorium.sdum.uminho.pt/bitstream/1822/12311/1/Phase%20changing%20materials%20in%20building%20elements.pdf)
178. D. Bečkovský, M. Ostrý, and T. Kalábová Thermal stability of attic spaces with integrated PCMin light building constructions during the climatic year KSI Trans 4 3 2011 54 57
179. M. Ostrý, D. Bečkovský, and P. Charvat Potential of passive cooling for cooling for office buildings KSI Trans 4 3 2011 52 53
180. I. Mandilaras, M. Stamatiadou, D. Katsourinis, G. Zannis, and M. Founti Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls Build Environ 61 2013 93 103