Design and Verification of 150-krpm PMSM Based on Experiment Results of Prototype

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 12, 2015, Pages 7827-7836

  Lim, Myung Seop ^a   Chai, Seung Hee ^a   Yang, Jae Sik ^b   Hong, Jung Pyo ^a  

^a Hanyang University   (South Korea)

^b Hyundai Motor Co   (South Korea)

Author keywords

Harmonic analysis; Iron; Materials; Permanent magnet motors; Prototypes; Rotors; Synchronous motors

Indexed keywords

DESIGN; ELECTRIC MOTORS; FINITE ELEMENT METHOD; HARMONIC ANALYSIS; IRON; IRON ANALYSIS; MAGNETS; MATERIALS; PERMANENT MAGNETS; ROTORS; ROTORS (WINDINGS); SYNCHRONOUS MOTORS;

ANALYTIC APPROACH; APPROPRIATE MATERIALS; DESIGN PROCESS; GEOMETRY DESIGNS; MASS MOMENT OF INERTIAS; PERMANENT MAGNET MOTOR; PROTOTYPES; SURFACE MOUNTED PERMANENT MAGNET SYNCHRONOUS MOTOR;

ELECTRIC MACHINE THEORY;

EID: 84947549935     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2015.2409804     Document Type: Article

References (23)

1. A. Binder, T. Schneider, and M. Klohr, "Fixation of buried and surface mounted magnets in high-speed permanent magnet synchronous motors," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 2005, vol. 4, pp. 2843-2848.
2. A. Borisavljevic, H. Polinder, and J. A. Ferreira, "On the speed limits of permanent-magnet machines," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 220-227, Jan. 2010.
3. D. K. Hong, B. C. Woo, J. Y. Lee, and D. H. Koo, "Ultra high speed motor supported by air foil bearings for air blower cooling fuel cells," IEEE Trans. Magn., vol. 48, no. 2, pp. 871-874, Feb. 2012.
4. D. Gerada, A. Mebarki, N. L. Brown, K. J. Bradley, and C. Gerada, "Design aspects of high-speed high-power laminated-rotor induction machines," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4039-4047, Sep. 2011.
5. J. R. Bumby, E. Spooner, and M. Jagiela, "Equivalent circuit analysis of solid-rotor induction machines with reference to turbocharger accelerator applications," Proc. Inst. Elect. Eng. Elect. Power Appl., vol. 153, no. 1, pp. 31-39, Jan. 2006.
6. C. C. Hwang, S. S. Hung, C. T. Liu, and S. P. Cheng, "Optimal design of a high speed SPM motor for machine tool applications," IEEE Trans. Magn., vol. 50, no. 1, Jan. 2014, Art. ID. 4002304.
7. S. M. Jang, H. W. Cho, and S. K. Choi, "Design and analysis of a high-speed brushless dc motor for centrifugal compressor," IEEE Trans. Magn., vol. 43, no. 6, pp. 2573-2575, Jun. 2007.
8. N. Bianchi, S. Bolognani, and F. Luise, "Analysis and design of a PM brushless motor for high-speed operations," IEEE Trans. Energy Convers., vol. 20, no. 3, pp. 629-637, Sep. 2005.
9. M. Sridharbabu, T. Kosaka, and N. Matsui, "Design analysis and improvement high speed hybrid excitation motor for main spindle drive in machine tools based on experimental results of prototype machine," in Proc. IEEE 8th ICPE ECCE Asia, May/Jun. 2011, pp. 1935-1939.
10. T. Schneider and A. Binder, "Design and evaluation of a 60 000 rpm permanent magnet bearingless high speed motor," in Proc. IEEE 7th Int. Conf. PEDS, Nov. 2007, pp. 1-8.
11. P.-D. Pfister and Y. Perriard, "Very-high-speed slotless permanent-magnet motors: Analytical modeling, optimization, design, and torque measurement methods," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 296-303, Jan. 2010.
12. T. Sun, J. M. Kim, G. H. Lee, J. P. Hong, and M. R. Choi, "Effect of pole and slot combination on noise and vibration in permanent magnet synchronous motor," IEEE Trans. Magn., vol. 47, no. 5, pp. 1038-1041, May 2011.
13. J. Boisson, F. Louf, J. Ojeda, X. Mininger, and M. Gabsi, "Analytic approach for mechanical resonance frequencies of high-speed machines," IEEE Trans. Ind. Electron., vol. 61, no. 6, pp. 3081-3088, Jun. 2014
14. H. Y. Yang, Y. C. Lim, and H. C. Kim, "Acoustic noise/vibration reduction of a single-phase SRM using skewed stator and rotor," IEEE Trans. Ind. Electron., vol. 60, no. 10, pp. 4292-4300, Oct. 2013
15. G. Pellegrino, P. Guglielmi, A. Vagati, and F. Villata, "Core losses and torque ripple in IPM machines: Dedicated modeling and design tradeoff," IEEE Trans. Ind. Appl., vol. 46, no. 6, pp. 2381-2391, Nov./Dec. 2010.
16. M. Dems, and K. Komeza, "Performance characteristics of a high-speed energy-saving induction motor with an amorphous stator core," IEEE Trans. Ind. Electron., vol. 61, no. 6, pp. 3046-3055, Jun. 2014
17. E. C. Lovelace, T. M. Jahns, T. A. Keim, and J. H. Lang, "Mechanical design considerations for conventionally laminated, high-speed, interior PM synchronous machine rotors," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 806-812, May/Jun. 2004.
18. J. W. Jung, S. H. Lee, and J. P. Hong, "Optimum design for eddy current reduction in permanent magnet to prevent irreversible demagnetization," in Proc. IEEE ICEMS, Oct. 2007, pp. 949-954.
19. H. M. Hamalainen, J. J. Pyrhonen, and J. Puranen, "Minimizing skin effect in random wound high speed machine stator," in Proc. IEEE EUROCON, May 2009, pp. 752-757.
20. B. H. Lee et al., "Modeling of core loss resistance for d-q equivalent circuit analysis of IPMSM considering harmonic linkage flux," IEEE Trans. Magn., vol. 47, no. 5, pp. 1066-1069, May 2011.
21. G. H. Kang, J. P. Hong, G. T. Kim, and J. W. Park, "Improved parameter modeling of interior permanent magnet synchronous motor based on finite element analysis," IEEE Trans. Magn., vol. 36, no. 4, pp. 1867-1870, Jul. 2000.
22. N. Zhao, Z. Q. Zhu, and W. Liu, "Comparison of rotor eddy current losses in permanent magnet motor and generator," in Proc. IEEE ICEMS, Aug. 2011, pp. 1-6.
23. J. Hur, "Characteristic analysis of interior permanent-magnet synchronous motor in electrohydraulic power steering systems," IEEE Trans. Ind. Electron., Vol. 55, no. 6, pp. 2316-2323, Jun. 2008.